Hobart CG24 User Manual

Item # _____________________________________

Quantity ___________________________________

C.S.I. Section 11400

CG SERIES HEAVY DUTY

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

STANDARD FEATURES

■ Stainless steel front, sides and 4" adjustable legs.

■ 1⁄2" thick polished steel griddle plate.

■ 11" cooking height on 4" adjustable legs.

■ Two solid sheathed tubular incoloy heating

elements, one snap action thermostat and cycling light per each 12" griddle width. Thermostats adjust from 200° to 450° F.

■ Heavy duty chromed thermostat knob guards

■ Stainless steel 4" back and tapered side

splashes.

■ 31⁄2" wide front grease trough empties into a large capacity grease drawer. 60" and 72" models have two grease drawers.

■ Available in 208V or 240V, 50/60 Hz, 1 or 3 phase power supply. 480V, 50/60 Hz 3 phase power supply.

ELECTRIC GRIDDLES

MODELS

❑ CG24 – 24" wide x 24" deep griddle plate ❑ CG58 – 36" wide x 24" deep griddle plate ❑ CG41 – 48" wide x 24" deep griddle plate ❑ CG50 – 60" wide x 24" deep griddle plate ❑ CG59 – 72" wide x 24" deep griddle plate

OPTIONS

❑ Stainless steel stand with marine edges and

casters

❑ Cutting board, condiment rail, plate rail and

banking strip accessories

Specications, Details and Dimensions on Inside and Back.

CG SERIES HEAVY DUTY ELECTRIC GRIDDLES

■ One year limited parts and labor warranty.

CG58

F40345 – CG Series Heavy Duty Electric Griddles Page 1 of 2

CG SERIES HEAVY DUTY ELECTRIC GRIDDLES

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartcorp.com

SPECIFICATIONS

Heavy duty electric griddle. Stainless steel front and sides. 11" cooking height on 4" adjustable legs. 1⁄2 " thick polished steel griddle plate. Tubular incoloy elements and one snap action thermostat for every 12" of griddle width. Thermostats

ELECTRICAL CHARACTERISTICS

STANDARD VOLTAGES – 208 VOLTS OR 240 VOLTS 50/60 Hz. – SINGLE OR THREE PHASE

3 PHASE LOADING

KW PER PHASE

X-Y Y-Z X-Z X Y Z X Y Z X Y Z VO LT VO LT

PER CONN.*

TOTAL

PER

CONN

16.2 5.4 5.4 5.4 45.0 45.0 45.0 39.0 39.0 39.0 19.5 19.5 19.5 77. 9 6 7. 5

10.8 5.4 0.0 5.4 45.0 22.5 22.5 39.0 19.5 19.5 19.5 9.7 9.7 51. 9 45.0

16.2 5.4 5.4 5.4 45.0 45.0 45.0 39.0 39.0 39.0 19.5 19.5 19.5 77. 9 6 7. 5

MODEL

NO.

CG24 10.8 10.8 5.4 5.4 0.0 22.5 45.0 22.5 19.5 39.0 19.5 9.7 19.5 9.7 51.9 45.0

CG58 16. 2 16.2 5.4 5.4 5.4 45.0 45.0 45.0 39.0 39.0 39.0 19. 5 19.5 19.5 77. 9 6 7. 5

CG41 21.6 21.6 10.8 5.4 5.4 6 7. 4 67.4 45.0 58.5 58.5 39.0 29.2 29.2 19.5 103.8 90.0

CG50* 27. 0

CG59* 32.4

*Model CG50 and CG59 require two separate electrical connections and se rvices.

TOTAL CONN.

480 VOLTS 50/60 Hz. – THREE PHASE ONLY

208 VOLT 240 V O LT 480 VOLT 208 240

adjust from 200° to 450° F. Stainless steel 4" back and tapered side splashes. 31⁄2 " wide front grease trough empties into large capacity grease drawer. Available in 208V, 240V 50/60 Hz, 1 or 3 phase. 480V 50/60 Hz 3 phase.

NOMINAL AMPS PER LINE WIRE CONN.*

3 PHASE 1 PHASE

INSTALLATION CLEARANCES:

Sides and rear must be 1" from nearest combustible construction and 0" from non-combustible construction. Bottom must be 4" from combustible or noncombustible construction. This appliance is manufactured for commercial installation only and is not intended for home use.

MODEL

NO.

CG24 24" (610)

CG58 36" ( 914) 1.5 310 lbs / 141 kg

CG41 48" (1219) 1.5 400 lbs / 181 kg

CG50 60" (1524) 2 x 1.5 535 lbs / 243 kg

CG59 72" (1821) 2 x 1.5 610 lbs / 277 kg

(Dimensions in parenthesis are in millimeters)

OVERALL DIMENSIONS

WIDTH DEPTH HEIGHT*

31.5" (800 ) 15.3" (389) 24" (610)

As continued product improvement is a policy of Hobart, specications are subject to change without notice.

COOKING SURFACE

DEPTH

GREASE DRAWER

CAPACITY (Gals.)

1.5 230 lbs / 104 kg

APPROX. SH I P W T.

Page 2 of 2 F40345 – CG Series Heavy Duty Electric Griddles

F40345 (02/13) LITHO IN U.S.A. (H-01)