HMC Electronics MCC-DST14A User Manual

Product Details

‡

Chemical Family Hydrouorocarbon
Aroma Slight, ethereal
Boiling Point -26˚ C / -16˚ F
Evaporation Rate Instant
Vapor Pressure @ 20˚C 96 PSIA

‡

These specications pertain to HFC-134a.

Health, Safety & Environmental Data

Toxicity Rating (ppm, 8-hr. TWA, TLV) 1000
Flashpoint (TCC) None
Safety Rating Nonammable
NFPA Health: 1; Fire: 0; Reactivity: 1
Primary Ingredient HFC-134a

(In Europe, these product instead feature an HFO Low GWP pro­pellant and have different performance, See PS-125 for details.)

Ozone Impact Zero
Organic Content (g/L) MCC-FRZA 12
All others 0
RoHS and WEEE Compliant Yes
F-Gas Compliant (In Europe only) Yes
SNAP Approved Yes

Packaging

Micro•Freeze™ Circuit Chiller 284 g MCC-FRZ*†
Micro•Freeze™ Anti-Stat 284 g MCC-FRZA*
Micro•Blast™, High-Flo Valve 284 g MCC-DST
Micro•Blast™, StatZap™ Valve 284 g MCC-DSTZ*
Big•Blast™, High-Flo Valve 392 g MCC-AIR

Packaged in cases of twelve (12) cans per box. Shelf life is unlimited.

• Products tagged with an asterisk are StatZAP™ compatible. MicroCare strongly
recommends the StatZAP™ dispenser, #MCC-ZAP, to minize damage from
static charges.

† Products tagged with the dagger are available in two different packages, although
the part numbers are identical. In Europe, those products are available only with
the nonammable Zeus™ Low GWP Propellant, a MicroCare exclusive, and
have safety labeling compliant with EU regulations. Outside of Europe, those two
products use U.S. labeling and HFC-134a as the propellant. In either case, the
quantity of propellant in the aerosols are identical.

Product Notes

AVAILABILITY. This product is available from MicroCare distributors world-wide.
Contact your local distributor at www.MicroCare.com for details.

TRADEMARKS. “MicroCare” and the MicroCare logo are registered trademarks
of MicroCare Corp. “Big•Blast”, “Micro•Blast”, “Micro•Freeze” and “StatZAP” are
all trademarks of MicroCare Corp.

DISCLAIMER. The information set forth herein is based on data believed to be
reliable, but MicroCare makes no warranties express or implied as to its accuracy
and assumes no liability arising out of its use by others. This publication is not
to be taken as a license to operate under, nor to infringe upon, any patents not
herein expressly described.

Precision Dusters

All the MicroCare® precision duster products deliver clean, dry blasts of a
compressed gas to hard-to-reach surfaces. They enable technicians to
remove dry contamination like dust, lint and sand from circuit boards, precision
mechanical devices and delicate substrates any type. Importantly, the cleaning
is performned without touching the surfaces. Unlike solvent cleaning, which
wets surfaces, these precision dusters are completely dry. These products are
equipped with a high-ow valve which generates enormous “blasting power.”
For static-sensitive applications, the unique, patented StatZAP™ ESD
Eliminator from MicroCare can be used on the StatZAP-compatible versions
of these products.

Freeze Sprays

All Micro•Freeze™ products deliver instant chilling of circuit boards and
components. They exceed the mil specs of -40˚C/-40˚F and may chill to as
low as -60˚C/-76˚F under optimal conditions. None will attack plastics or
generate component-shattering thermal shock. The Anti-Stat Micro•Freeze
includes a static-dissipative additive that evaporates in about sixty seconds.

Other Information

These products all feature HFC-134a as the propellant, which is the industry
standard for nonammable propellants. This is noncorrosive, residue-free
and plastic-safe. Unlike less expensive products, none of them are ammable
which greatly enhances worker safety.

Special Safety Note: Some companies call their precision dusters by the term
“canned air.” These products do not contain air and should not be used as a
breathing apparatus.

MCC-FRZ PRODUCT SPEC PS-50 Rev. 8/20/2010 Replaces 11/25/2008 Page 1 of 1

MicroCare Corporation

595 John Downey Drive, New Britain, CT 06051 USA
Tel: [phone] Fax: [phone]
In North America, Dial: 800.638.0125
Email: [e-mail]
On the Web: www.MicroCare.com

MicroCare is

ISO 9001:2000

Registered

Technical Specification

Precision Dusters &

Freeze Sprays

Documentation Provided By HMC Electronics

33 Springdale Ave. Canton, MA 02021

http://www.hmcelectronics.com

[phone]

The StatZAP™ ESD Eliminator

Kills Static; Saves PCBs and

Avoids Repairs

If your company is using precision dusters in static-sensitive environments, then the
StatZAP™ ESD Eliminator is a tool you need.

Each StatZAP™ dissipates the dangerous
static charges created by high-pressure aero­sols, keeping your components safe from
dangerous ESD. Ordinary aerosol sprays
create up to 12,000 volts of chip-killed ESD
as the liquid or gas races down the plastic
spray tube inside the aerosol can. Since volt­ages as low as 150 volts can cause ESD dam­age, the StatZAP ESD Eliminator is engi­neered to continuously drain these charges
before they reach dangerous levels.

Other important features include:

• Noncorrosive stainless steel construc­tion for years of life.

• The comfortable knurled grip and the extra­long trigger activator minimize the potential for repetitive motion injuries.

• The angled tip can be rotated upward, making it easy to spray accurately in any direction.

• The ShockShield™ insulating sheath covers the tip of the StatZAP, protecting the board
and the operator from accidentally touching an energized circuit.

MicroCare Corporation

595 John Downey Drive, New Britain, CT 06051 USA

Tel: [phone] Fax: [phone]

In North America, Dial: 800.638.0125
Email: [e-mail]

On the Web: www.MicroCare.com

Contact MicroCare Today and See

How Easy It Can Be to Avoid ESD Damage!

www.MicroCare.com

Documentation Provided By HMC Electronics

33 Springdale Ave. Canton, MA 02021

http://www.hmcelectronics.com

[phone]