Page 1
DS-750E ©2009 ITW Texwipe Printed in USA
Effective: December 2009
Mini Compressed
CleanFoam®ESD Swab
Transplex®Series
Description
The Mini Compressed CleanFoam®ESD Swab is an excellent
dissipative swab for cleaning small slotted and grooved areas. Its
compressed, laundered CleanFoam
®
head possesses good firmness and a pointed tip.A compact, rigid handle and tapered
internal core provide good support.The handle is made from a
Stat-Rite
®
polymer alloy using a patented Inherently Dissipative
Polymer (IDP) to provide clean, permanent ESD protection without contributing particulate contaminates to the cleanroom.
Features
■
Laundered polyurethane CleanFoam®head over rigid
precision tip
■
Compressed, 100 ppi open-cell structure
■
Compact, ESD-safe Transplex®handle
■
Thermally bonded head
■
Firm, nonabrasive tip
Benefits
■
Low nonvolatile residue
■
Low particle generation
■
Good sorbency and excellent solvent hold
■
No contaminating adhesives
■
ESD control without contaminating carbon or metal loading
■
No blooming ionic antistats
■
No contaminating coatings
■
Humidity-independent ESD control for consistent performance
■
Safely dissipates charges in under two seconds when used with
a solvent such as IPA
Applications
■
Magneto-resistive (MR) head manufacturing and assembly
■
Cleaning small areas with solvents such as IPA
■
Applying lubricants and other liquids
■
Removing excess materials
Products
TX Number Description Packaging
TX750E Mini Compressed Bag-Within-A-Bag®;
TX750D* CleanFoam
®
ESD Swab 500 swabs/ bag;
5 inner bags
of 100 swabs;
5 bags/case
*Available in Asia/Pacific
Precision Tip
Compressed Open-Cell CleanFoam
®
Thermally Sealed
Transplex
®
Handle
Actual Size
ITW TEXWIPE DATASHEET
North America
1210 South Park Drive
Kernersville, NC 27284
Tel (800) TEXWIPE
(336) 996-7046
Fax (336) 996-2297
www.texwipe.com
[email protected]
Europe/Middle East
Skejby Nordlandsvej 307
DK-8200 Aarhus N
Denmark
Tel +45 87 400 220
Fax +45 87 400 222
Asia/Pacific
50 Tagore Lane
#02-01 Entrepreneur Centre
Singapore 787494
Tel +65 6468 9433
Fax +65 6468 6772
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440
Page 2
ITW TEXWIPE DATATABLE
Physical Characteristics
Head material 100 ppi open-cell CleanFoam
®
Head width 3.5 mm (0.138" )
Head thickness 3.5 mm (0.138" )
Head length 10.0 mm (0.394")
Handle material Transplex
®
Handle width 3.0 mm (0.118" )
Handle thickness 3.0 mm (0.118" )
Handle length 79.0 mm ( 3.110")
Total swab length 89.0 mm (3.504" )
Head bond Thermal
Handle color Translucent
Design notes Precision pointed tip; compact handle
Contamination Characteristics
Property Measurement Test Method*
Nonvolatile residue
IPA extractant 0.07 mg/swab TM10: Procedure for Determining the Nonvolatile Residue (NVR) Extractable
from Swabs in a Given Solvent
Ions The Determination of Ions by Ion Chromatography (IC)
Chloride 0.06 µg/swab
Sulfate 0.18 µg/swab
Nitrate < 0.01 µg/swab
Phosphate 0.36 µg/swab
Fluoride <0.01 µg/swab
Potassium 0.03 µg/swab
Calcium <0.01 µg/swab
Sodium 1.12 µg/swab
Magnesium <0.01 µg/swab
Electrostatic Discharge Characteristics
Property Measurement Test Method
Handle resistivity 10 x 109ohms/cm TM16: Determination of the Resistance per Unit Length (ohm/cm) of Swab
Handles. (Adapted from EOS/ESD-S11.11-1993.)
*Test procedures available upon request.
Mini Compressed CleanFoam®ESD Swab TX750E TX750D
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440
Loading...