HMC Electronics Foam Series Medium Flexible Head Swab User Manual
DS-709A ©2009 ITW Texwipe Printed in USA
Effective: December 2009
Medium Flexible
Head Swab
Foam Series
Description
The Medium Flexible Head Swab is a flexible, general-purpose
swab for cleaning surfaces and recessed areas. Its closed-cell
polyurethane foam head possesses excellent durability and
cushioning.An internal nylon paddle provides flexible support.
The round polypropylene handle enables good control and ease
of use.
Features
■
Polyurethane foam head over flexible nylon paddle
■
Closed-cell structure
■
Round polypropylene handle
■
Thermal and epoxy head seal
■
Soft and nonabrasive
Benefits
■
Low particle and fiber generation
■
Excellent strength
■
Good chemical resistance
Applications
■
Cleaning with solvents such as IPA
■
Applying lubricants and other liquids
■
Removing excess materials
■
Scrubbing applications
Products
TX Number Description Packaging
TX709A Medium Flexible Head Bag-Within-A-Bag®;
Swab 100 swabs/bag;
2 inner bags
of 50 swabs;
10 bags/case
Flexible Nylon Paddle
Closed-Cell Foam
Thermal and Epoxy Seal
Polypropylene Handle
Actual Size
ITW TEXWIPE DATASHEET
North America
1210 South Park Drive
Kernersville, NC 27284
Tel (800) TEXWIPE
(336) 996-7046
Fax (336) 996-2297
www.texwipe.com
info@texwipe.com
Europe/Middle East
Skejby Nordlandsvej 307
DK-8200 Aarhus N
Denmark
Tel +45 87 400 220
Fax +45 87 400 222
Asia/Pacific
50 Tagore Lane
#02-01 Entrepreneur Centre
Singapore 787494
Tel +65 6468 9433
Fax +65 6468 6772
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440
ITW TEXWIPE DATATABLE
Physical Characteristics
Head material 100 ppi closed-cell polyurethane foam
Head width 4.8 mm (0.189")
Head thickness 4.2 mm (0.165")
Head length 12.0 mm (0.472")
Handle material Polypropylene
Handle width 4.3 mm (0.169")
Handle thickness 4.3 mm ( 0.169")
Handle length 93.0 mm (3.661")
Total swab length 105.0 mm(4.134")
Head bond Thermal/Epoxy
Handle color Light green
Design notes Flexible nylon head paddle; medium handle
Contamination Characteristics
Property Measurement Test Method*
Nonvolatile residue
IPA extractant 0.24 mg/swab TM10: Procedure for Determining the Nonvolatile Residue (NVR) Extractable
from Swabs in a Given Solvent
Ions The Determination of Ions by Ion Chromatography (IC)
Chloride 0.64 µg/swab
Sulfate 0.05 µg/swab
Nitrate 0.42 µg/swab
Phosphate 0.03 µg/swab
Fluoride <0.01 µg/swab
Potassium 0.75 µg/swab
Calcium 0.02 µg /swab
Sodium 0.39 µg/swab
Magnesium <0.01 µg/swab
*Test procedures available upon request.
Medium Flexible Head Swab TX709A
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440
Loading...