HMC Electronics ES195 User Manual

PRODUCT DESCRIPTION

Flux-Off® No Clean New & Improved! Flux
Remover is an extra strength nonflammable
solvent that removes heavy and encrusted flux
deposits. This high pressure aerosol or bulk
liquid penetrates quickly to remove all types
of flux, oxide particles, dust, grease and oil,
then evaporates quickly leaving no residues.
 Same great features as original,
without HCFC-141b

 Non-corrosive, safe for metals
 Nonflammable
 Fast drying
 Powerful cleaner removes R, RA, RMA,

and synthetic fluxes

 Removes encrusted fluxes
 All-Way Spray valve - even sprays upside

down

 Available with BrushClean™ System

TYPICAL APPLICATIONS
Flux-Off

®

No Clean New & Improved! Flux

Remover effectively cleans flux from:

 Chip Carriers
 Heat Sinks
 Metal Housings and Chassis
 Printed Circuit Boards
 Plugs
 Relays and Contacts
 Sockets
 Surface Mount Device Pads
 Switches

TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES

Boiling Point

114°F Initial

Evaporation Rate >1
(butyl acetate=1)
Flash Point (TCC) None

Specific Gravity 1.34
Vapor Pressure @68°F 205 mm Hg
Appearance Clear, Colorless Liquid
Odor

Ethereal

Solubility in Water

Negligible

Kauri-Butanol
(KB) Number

87

Shelflife 5 years
RoHS/WEEE

Status

COMPATIBILITY

New & Improved Flux-Off

®

No Clean is
generally compatible with most materials used
in the electrical and electronic assemblies,
except acrylics, ABS resins, Polycarbonates
and Polystyrenes. With any cleaning agent
solvent/component compatibility must be
determined on a non-critical area prior to use.

TDS # 1695

CHEMTRONICS

®

Technical Data Sheet

Flux-Off® No Clean New & Improved!

Flux Remover

Documentation Provided By HMC Electronics

33 Springdale Ave. Canton, MA 02021

http://www.hmcelectronics.com

[phone]

Material Compatibility

ABS Non-Compatible
Buna-N Fair
EPDM Fair
Graphite Excellent
HDPE Excellent
LDPE Good
Lexan™

Fair
Neoprene Fair
Noryl®

Poor
Nylon™ 66

Excellent
Cross-Linked PE Excellent
Polypropylene Excellent
Polystyrene Non-Compatible
PVC Excellent
Silicone Rubber Poor
Teflon™

Excellent
Viton™

Fair

Performance

Flux removal per gram solvent (mg)

Flux-Off No Clean
New & Improved!

11.36

Competitive flux remover

7.6.

USAGE INSTRUCTIONS

For industrial use only.
Read MSDS carefully prior to use.
Spray 4-6” from surface to clean. Wash parts
from top to bottom, allowing the liquid to
flush away flux residue. Flux-Off

®

No Clean
New & Improved! may be used to remove all
types of fluxes in an ultrasonic cleaner.

AVAILABILITY
ES1695 12 oz. Aerosol
ES895B 8 oz. Brush Clean System
ES195 1 Gal. Liquid

TECHNICAL & APPLICATION
ASSISTANCE

ITW Chemtronics

®

provides a technical
hotline to answer your technical and
application related questions. The toll free
number is: 1-800-TECH-401.

ENVIRONMENTAL IMPACT DATA

ENVIRONMENTAL IMPACT DATA

CFC 0.0% VOC 41.5%
HCFC-141b
HCFC-225

0.0%

38.4%

HFC

nPB

18.0%

0.0%

CFC, HCFC-225, HCFC-141b, VOC, HFC, and nPB
percentages shown are the content by weight.

NOTE:

This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly. ITW
CHEMTRONICS® does not guarantee the accuracy
of the data and assumes no liability in connection
with damages incurred while using it.

MANUFACTURED BY:

ITW CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888

REV. B (06/06)

DISTRIBUTED BY:

Documentation Provided By HMC Electronics

33 Springdale Ave. Canton, MA 02021

http://www.hmcelectronics.com

[phone]