HMC Electronics ES1678 User Manual
PRODUCT DESCRIPTION
Electro-Wash® PN New & Improved! Cleaner
Degreaser is a plastic safe and nonflammable
cleaner formulated for all aspects of cleaning
electronic components and assemblies. This
precision cleaner is fast drying and has excellent
solvency for oil, handling soils, dirt, and even
light flux residues.
Same great features as original,
without HCFC-141b
Removes dirt, grease, carbon, oil, and flux
residues
Excellent plastic compatibility
Nonflammable
Dries very quickly
Leaves no residue
Noncorrosive
Enhances electrical signals
Available with All-Way Spray valve
Patent Pending
TYPICAL APPLICATIONS
Electro-Wash
®
PN New & Improved! Cleaner
Degreaser is engineered for cleaning:
Printed Circuit Boards
Chip Carriers
Edge Connector Sockets
Relays and Contacts
Sensitive Plastic Components
Electronic Controls
Light Flux Residues
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point
99°F (Initial)
Evaporation Rate
(butyl acetate=1)
>1
Flash Point (TCC)
None
Specific Gravity
1.29
Vapor Pressure @68°F 165 mmHg
Appearance Clear, colorless liquid
Odor
Ethereal Odor
Solubility in Water
Negligible
Dielectric Breakdown
(ASTM D-877)
26 kV
Shelflife 5 years
RoHS/WEEE
Status
COMPATIBILITY
Electro-Wash
®
PN New & Improved!
Cleaner Degreaser has excellent
compatibility with most materials used in the
electronics industry. With any cleaning
agent compatibility with substrate should be
determined on a non-critical area prior to use.
TDS # 1678
CHEMTRONICS
®
Technical Data Sheet
Electro-Wash® PN New & Improved!
Cleaner Degreaser
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440
Material Compatibility
ABS Excellent
Buna-N Excellent
EPDM Excellent
Graphite Excellent
HDPE Excellent
Kynar™
Excellent
LDPE Excellent
Lexan™
Good
Neoprene Excellent
Noryl®
Excellent
Nylon™ 66
Excellent
Cross-Linked PE Excellent
Polypropylene Excellent
Polystyrene Good
PVC Excellent
Silicone Rubber Excellent
Teflon™
Excellent
Viton™
Excellent
Performance
Grease Removal per gram solvent (mg)
Electro-Wash PN
New & Improved !
2.26
HFC-based Cleaner
0.50.5
Grease & Lubricating Oil Removal per gram
solvent (mg)
Electro-Wash PN
New & Improved !
7.423.8
23.8
HFC-based Cleaner
0.50.5
USAGE INSTRUCTIONS
For commercial use only.
Read MSDS carefully prior to use.
Spray 4-6 inches from surface to clean.
Wash parts from top to bottom, allowing the
liquid to flush away dirt and dissolved
grease. For precise application use attached
extension tube.
AVAILABILITY
ES1678 12 oz. Aerosol
TECHNICAL & APPLICATION
ASSISTANCE
ITW Chemtronics
®
provides a technical
hotline to answer your technical and
application related questions. The toll free
number is: 1-800-TECH-401.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC 0.0% VOC 15.2%
HCFC-225
HCFC-141b
35.0%
0.0%
HFC
nPB
47.9%
0.0%
CFC, HCFC-225, HCFC-141b, VOC, HFC, and nPB
percentages shown are the content by weight.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly. ITW
CHEMTRONICS® does not guarantee the accuracy
of the data and assumes no liability in connection
with damages incurred while using it.
MANUFACTURED BY:
ITW CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. B (06/06)
DISTRIBUTED BY:
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440
Loading...