HMC Electronics ES1677 User Manual
PRODUCT DESCRIPTION
Pow-R-Wash™ PN New & Improved! Contact
Cleaner is a highly effective solvent cleaner for
electrical and electronic components and
assemblies. This cleaning agent is both
nonflammable and safe for use on plastics and
metals.
Same great features as original,
without HCFC-141b
Rapidly cleans dirt, oils, carbon, grease and
other contaminants
Nonflammable
Excellent material compatibility
Displaces moisture
Evaporates fast
Leaves no residues
Enhances electrical signal
Low toxicity
Available with All-Way Spray valve
Patent Pending
TYPICAL APPLICATIONS
Pow-R-Wash™ PN New & Improved! Contact
Cleaner effectively cleans and degreases:
Printed Circuit Boards
Circuit Breakers
Electrical Motors
Potentiometers
Contacts and Relays
Motors and Generators
Selector Switches
Solenoids
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point
99°F (Initial)
Evaporation Rate
(butyl acetate=1)
>1
Flash Point (TCC)
None
Specific Gravity
1.29
Vapor Pressure @68°F 165 mmHg
Appearance Clear, colorless liquid
Odor
Ethereal Odor
Solubility in Water
Negligible
Dielectric Breakdown
(ASTM D-877)
26 kV
Shelflife 5 years
RoHS/WEEE
Status
COMPATIBILITY
Pow-R-Wash™ PN New & Improved! Contact
Cleaner has excellent compatibility with most
materials used in the electronics industry. With
any cleaning agent, compatibility with substrate
should be determined on a non-critical area prior
to use.
TDS # 1677
CHEMTRONICS
®
Technical Data Sheet
Pow-R-Wash™ PN New & Improved!
Contact Cleaner
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440
Material
Compatibility
ABS Excellent
Buna-N Excellent
EPDM Excellent
Graphite Excellent
HDPE Excellent
Kynar™
Excellent
LDPE Excellent
Lexan™
Good
Neoprene Excellent
Noryl®
Excellent
Nylon™ 66
Excellent
Cross-Linked PE Excellent
Polypropylene Excellent
Polystyrene Good
PVC Excellent
Silicone Rubber Excellent
Teflon™
Excellent
Viton™
Excellent
Performance
Grease Removal per gram solvent (mg)
Pow-R-Wash PN
New & Improved!
2.2
HFC-based Cleaner
0.50.5
Grease & Lubricating Oil Removal per gram
solvent (mg)
Pow-R-Wash PN
New & Improved!
7.423.82
3.8
HFC-based Cleaner
0.50.5
USAGE INSTRUCTIONS
For commercial use only.
Read MSDS carefully prior to use.
Spray 4-6 inches from surface to clean. Wash
parts from top to bottom, allowing the liquid to
flush away dirt and dissolved oil and grease.
For precise application use attached extension
tube.
AVAILABILITY
ES 1677 12 oz. Aerosol
TECHNICAL & APPLICATION
ASSISTANCE
ITW Chemtronics
®
provides a technical
hotline to answer your technical and
application related questions. The toll free
number is: 1-800-TECH-401.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC 0.0% VOC 15.2%
HCFC-225
HCFC-141b
35.0%
0.0%
HFC
nPB
47.9%
0.0%
CFC, HCFC-225, HCFC-141b, VOC, HFC and nPB
percentages shown are the content by weight.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly. ITW
CHEMTRONICS® does not guarantee the accuracy
of the data and assumes no liability in connection
with damages incurred while using it.
MANUFACTURED BY:
ITW CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
DRAFT. B (06/06)
DISTRIBUTED BY:
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440
Loading...