HMC Electronics ES1620 User Manual
PRODUCT DESCRIPTION
Ultrajet® All-Way Duster is a new innovative
all-way spray duster with the biggest blast to
clean anything fast. This compressed gas
duster can be sprayed right-side up and upside
down emitting a high pressure blast that
cleans electronics without scratching delicate
surfaces.
Filtered to 0.2 microns
Biggest air blast of any non-CO
2
duster
Ultrajet
®
All-Way sprays any direction,
even upside down
Ozone safe, CFC and HCFC Free
High pressure for contamination control
Nonabrasive and residue free
Excellent material compatibility
Penetrates hard to reach areas
TYPICAL APPLICATIONS
Ultrajet
®
All-Way is engineered for all
aspects of electronic equipment maintenance
and is particularly suited for applications
involving:
Audio/Video Equipment
Computers and Other Electronic
Equipment
Lab Instruments
Photo Equipment
Printed Circuit Boards
Surface Mount Devices
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point -15.7°F
Vapor Density (air=1)
@ 77°F
3.18
Solubility in Water
@ 77°F F/1 atm
0.10% by weight
Specific Gravity
(water = 1 @77°F)
1.21
Evaporation Rate >1
(butyl acetate=1)
Appearance Clear, Colorless
Liquified Gas
Odor
Slight Ethereal
Surface Tension
(dynes/cm @77°F)
7.8
Flash Point (TCC)
None
Shelflife 5 years
RoHS/WEEE
Status
COMPATIBILITY
Ultrajet
®
All-Way is generally compatible
with most materials used in printed circuit
board fabrication, including sensitive plastics
and compounds. As with any duster/cleaner,
compatibility must be determined on a noncritical area prior to use.
TDS # 1620
CHEMTRONICS
®
Technical Data Sheet
Ultrajet® All-Way Duster
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440
Material Compatibility
Buna-N Excellent
Graphite Excellent
HDPE Excellent
LDPE Excellent
Lexan™
Excellent
Neoprene Excellent
Cross-Linked PE Excellent
Polyacrylate Excellent
Polystyrene Excellent
PVC Excellent
Silicone Rubber Excellent
Teflon™
Excellent
Viton™
Excellent
PERFORMANCE
Pressure PSIG / Temperature F
200
-
P
150
S
-
I
100
G
-
50
-
0
20 40 60 80 100 120 140
Temperature F
USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
No special surface preparation is required
prior to using Ultrajet
®
All-Way. Direct high
pressure spray onto the area to be cleaned to
remove dust, dirt and other contaminant. For
optimum performance and pin point control,
use with the attached extension tube.
AVAILABILITY
ES1620 8 oz. Aerosol
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics® provides a technical hotline to answer
your technical and application related questions. The
toll free number is:
1-800-TECH-401.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC 0.0% VOC 0.0%
HCFC 0.0% HFC 100.0%
CL Solv. 0.0% ODP 0.0
CFC, HCFC, CL. SOLV., VOC, and HFC numbers shown
are the content by weight. Ozone depletion potential
(ODP) is determined in accordance with the Montreal
Protocol and U.S. Clean Air Act of 1990. The ODP of this
product is 0.0. It is the sum of the ODP of the substances
that may contribute to the depletion of stratospheric ozone,
based upon the weight of each substance in the product’s
formulation.
NOTE:
This information is believed to be accurate. It is intended
for professional end users having the skills to evaluate and
use the data properly. CHEMTRONICS
®
does not
guarantee the accuracy of the data and assumes no liability
in connection with damages incurred while using it.
MANUFACTURED BY:
ITW CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888 REV. F (06/06)
DISTRIBUTED BY:
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440
Loading...