HMC Electronics ES1612 User Manual

CHEMTRONICS
Technical Data Sheet
Pow-R-Wash NX Contact Cleaner
PRODUCT DESCRIPTION
The Pow-R-Wash NX formulation is a nonflammable electronics contact cleaner that quickly removes soils, oxides, and other contaminates from metal electrical contacts. This high pressure solvent system is engineered to restore and improve electrical continuity on all types of contacts, connectors, and switches. Same great features as original
formulation but without HCFC-141b
Removes encrusted oxides, dirt, grease
and other contaminants
Penetrates to clean hard to reach areas Evaporates quickly Nonflammable Leaves no residues Noncorrosive; safe for sensitive metals Available with All-Way Spray valve U.S. Patent 6,746,998
TYPICAL APPLICATIONS Pow-R-Wash
NX contact cleaner cleans
and deoxidizes:
Circuit Breakers Monitors and Generators Plugs and Sockets Potentiometers Printed Circuit Boards Relay and Contacts Selector Switches Solenoids Switching Devices
TYPICAL PRODUCT DATA AND PHYSICAL PROPERTIES
TDS # 1612
Boiling Point
>99F Initial
Evaporation Rate (butyl acetate=1) >1 Flash Point (TCC) None Specific Gravity 1.28 Vapor Pressure @68F 183 mmHg Solubility in Water
Negligible
Dielectric Breakdown (ASTM D-877)
30 kV
VOC* Content: Aerosol CARB 75%
SCAQMD 830 g/L Federal 42%
RoHS Compliant
Shelflife 5 years
*Volatile Organic Compound (VOC) information is calculated on a weight basis using the VOC definition of California Air Resources Board (CARB) Consumer Product Regulations, South Coast Air Quality Management District (SCAQMD) Rule 102 and the Federal definition published in 40 CFR 51.100(s).
COMPATIBILITY Pow-R-Wash
NX formulation is generally compatible with most materials used printed circuit board fabrication except acrylics, ABS resins, polycarbonates and polystyrenes. As with any cleaning agent, solvent/component compatibility must be determined on a non-critical area prior to use.
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440
Material Compatibility
ABS Not Recommended Buna-N Fair EPDM Fair Graphite Excellent HDPE Good Kynar
Not Recommended LDPE Good Lexan
Not Recommended Neoprene Good Noryl
Not Recommended Nylon Excellent Cross-Linked PE Good Polypropylene Good Polyacrylate Not Recommended Polystyrene Not Recommended PVC Fair Silicone Rubber Good Teflon
Excellent Viton
Fair
Performance
Grease Removal per gram solvent (mg)
Pow-R-Wash NX
15.66
HFC-based Cleaner
0.50.5
Grease & Lubricating Oil Removal per gram solvent (mg)
Pow-R-Wash NX
23.823.823.8
HFC-based Cleaner
0.50.5
USAGE INSTRUCTIONS
For commercial use only. Read MSDS carefully prior to use. Spray 4-6 inches from surface to clean. Wash parts from top to bottom, allowing the liquid to flush away dirt and dissolved grease. For precise application use attached extension tube.
AVAILABILITY
ES1612 12 oz. Aerosol
TECHNICAL & APPLICATION ASSISTANCE
ITW Chemtronics
provides a technical hotline to answer your technical and application related questions. The toll free number is: 1-800-TECH-401.
ENVIRONMENTAL IMPACT DATA
HCFC-141b HCFC-225
None Yes
HFC nPB
Yes None
Hydrochlorofluorocarbons (HCFCs) are regulated under the Montreal Protocol as Class II ozone depleting substances. HCFC-141b is no longer produced in the US under this legislation. HCFC-225 is planned for production phase-out in 2015. Hydrofluorocarbons (HFCs) are not currently regulated. EPA has listed n-propyl bromide (nPB) as an acceptable alternative to ozone depleting substances in metal, precision, and electronics cleaning under Section 612 of the Clean Air Act.
NOTE:
This information is believed to be accurate. It is intended for professional end users having the skills to evaluate and use the data properly. ITW CHEMTRONICS does not guarantee the accuracy of the data and assumes no liability in connection with damages incurred while using it.
Chemtronics is a registered trademark of ITW Chemtronics. All rights reserved. Pow-R-Wash is a trademark of ITW Chemtronics. All rights reserved. All other trademarks herein are trademarks or registered trademarks of their respective owners.
MANUFACTURED BY:
ITW CHEMTRONICS 8125 COBB CENTER DRIVE KENNESAW, GA 30152 1-770-424-4888
REV. B (06/09)
DISTRIBUTED BY:
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440
Loading...