HMC Electronics 54-200-888 User Manual

93

Fred V. Fowler Company, Inc.

Internet: www.fvfowler.com E-mail: [e-mail]

Calipers & Sets

Pro-Max Electronic Caliper

No. 54-200-777

• Large, high contrast LCD display indicates in/mm, hold,
and zero functions.

• New hold feature freezes display for later viewing. Ideal
for hard to reach places.

• Low drain, high efciency lithium wafer battery
(environmentally safe for disposal) offers 4500 hrs. of
continuous on time. Life extended 2—3 years with use
of on/off switch.

• Direct RS-232C output; allows connection of the tool
to any computer or printer with no interface necessary!
Simply hook up the tool with the specially constructed
opto-electronic cable (with 9 pin serial connector) and
enjoy direct SPC output. This feature alone will save
many dollars over gages requiring additional interfaces.

Fowler's ProMax-Cal calipers include all the ne fea­tures of the Ultra-Cal III®, including Sylvac's patented,
high accuracy capacitive sensor and the addition of a
thumb wheel.

Special Features:

• Offers 4-way measurement—depth, inside, outside and
step.

• Resolution .0005"(.01mm)

• Repeatability 1 digit ±2s.

• Sliding internal top cross jaw.

• Hardened stainless steel construction.

• Temperature range 5 to 40C° working; -20 to 60C° in
storage

Electronic Specications:

• Completely re-engineered measuring sensor, a marked
improvement of the already proven Sylvac capacitive
measuring system.

• Incremental oating zero. Deviations are read out
directly with no math.

• Direct inch/metric conversion.

• Increased measuring, tracking speed of approximately
60"/second.

Order No. Description Accuracy

54-200-777 0—6" (0—150mm) ProMax-Cal .001"(.03mm)
54-200-888 0—8" (0—200mm) ProMax-Cal .001"(.03mm)
54-115-333 Simplex Computer Connection Kit Includes 80" (2m) connecting cable with 9 pin
IBM AT RS-232 connector; software support disk & instructional manual.
54-100-350 Replacement lithium battery (type #CR2032 or BR2032).

Jaw Specications

Caliper Size 6" 8"

External Jaw Length 1.5" 1.5"
Internal Jaw Length .625" .625"
Jaw Thickness .118" .118"

Documentation Provided By HMC Electronics

33 Springdale Ave. Canton, MA 02021

http://www.hmcelectronics.com

[phone]