
Service Documents
Confidential, for authorized service technicians only!
Do not disclose this information to or share these documents
with third parties.
Vertraulich! Nur für autorisierte Servicetechniker!
Nicht zur Weitergabe an Dritte freigegeben!
TECHNICAL SERVICE:
Stamer Musikanlagen GmbH • Magdeburger Str. 8 • 66606 St.Wendel • Germany
Music & Sales P.E. GmbH • Leipziger Str. 3 • 66606 St.Wendel • Germany
Note!
The components used in this product - particularly parts affecting
safety as well as speakers and transformers - were developed and
manufactured to certain specifications. Please use original spare
parts only to ensure the product remains fully functional and safe.
Achtung!
Die in diesem Produkt verwendeten Komponenten, insbesondere
sicherheitsrelevante Teile, Lautsprecher und Transformatoren
wurden nach spezifischen Vorgaben entwickelt und gefertigt.
Bitte benutzen Sie ausschließlich Original-Ersatzteile – nur so ist
die volle Funktionalität und Sicherheit gewährleistet.

Directory
features
drawing-numbers-example
standard for single wire confection
HK0205 – Premium PR:O 15
exploded drawings:
circuit diagrams
layout diagrams
page: 3-8
page: 9
page: 10
page: 11
complete Rev.: B page: 12-13
front grille Rev.: B page: 14
crossover Rev.: B page: 15
crossover Rev.: C page: 16

PREMIUM PR:O Manual 1.0
Table of Contents
1 Aligning Cabinets with DuoTilt™ . . . . . . . . . . 6
2 Connecting Components and Speakers . . . . . . 6
2.1 PR:O 12, PR:O 15 and PR:O 15 X
in Full-range Mode 6
2.2 PR:O 12, PR:O 15 und PR:O 15 X
in Satellite Mode with the PR:O 18 S 7
2.3 PR:O 12 M und PR:O 15 X 7
3 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 7
4 Technical Specifications . . . . . . . . . . . . . . . . . 8
4.1 PR:O 12 8
4.2 PR:O 12 M 8
4.3 PR:O 15/ PR:O 15 X 9
4.4 PR:O 18 S 9
Welcome to the
HK Audio
®
family!
Thank you for choosing (yet another) HK Audio
®
product.
Perfect sound is the product of perfect tuning. This
is why the HK Audio
®
development team comprises
engineers specializing in acoustics, analog and digital
electronics, and mechanics. This tight-knit team
collaborates with a musicologist who tweaks the sound of every HK Audio
®
product to suit human
auditory physiology. HK Audio
®
developers have the
perfect tool for this at their disposal—one of the
world’s most advanced acoustical measurement
labs. It enables a speaker system’s audio properties
and dynamics to be documented and analyzed in
minute detail to ultimately advance the state of the
art. Every day in our sonic foundry is a day spent
with a singular goal in mind—to forge impressive sound reinforcement tools! So, what do mean
by impressive?
• Your voice (and every other audio signal) is rendered
accurately and authentically.
• Greater utilizable sound pressure is assured so that
the sound remains true and balanced right up to
the threshold of power-handling capacity.
• Remarkably well-balanced frequency response and
constant dynamic response requiring no further
EQ-ing.
• Listening fatigue never sets in: Disharmonic
distortion and resonance are minimized so the sound continues to please to your audience’s ears
even after long listening sessions.
• Plug in, power up and enjoy great sound right out
of the box: HK Audio
®
systems take you there that
much faster.

5
English
Facts & Features
DuoTilt™ – making the most of sonic energy
The novel DuoTilt ™ pole mount allows sound energy
to be utilised far more efficiently. DuoTilt™ offers
7.5° and 15° angles of tilt, enabling precise speakerto-audience alignment. Acoustic interference from
ceiling reflections is minimized, leaving the sound
cleaner, tighter, and much more articulate.
Passive Crossover
in Bass Systems
The PR:O 18 S bass bin sports a sophisticated crossover that sends all low-end frequencies to the woofer
and all mid-range and high frequencies to the
connected satellite. This frequency separation affords
you the audio benefits of a truly homogenous sound
system, free of the pitfalls of overlapping phases that
frequently plague lesser PAs.
Modular System
The PREMIUM PR:O Series is modular so that mid/high units may be combined with the PR:O 18 S bass
bin at will. This modularity extends to the acoustic
domain: Like every HK Audio
®
system,
PREMIUM PR:O Series components are meticulously
matched. Regardless of the PREMIUM PR:O Series
configuration, you are sure to enjoy that trademark
excellent HK Audio
®
sound!
Dynamic Protective Circuitry for the
High-frequency Driver
PREMIUM PR:O Series mid/high units and monitors
are equipped with special protective circuitry. Located
in the high-frequency signal path, it limits output
levels whenever the high-frequency signal level
approaches the 1" driver’s overload threshold.
The PREMIUM PR:O Series comprises PR:O 12 and
PR:O 15 fullrange speaker cabinets, PR:O 18 S subwoofers and PR:O 12 M and PR:O 15 X monitors.

PREMIUM PR:O Manual 1.0
1 Aligning Cabinets with
DuoTilt™
The novel integrated DuoTilt™ pole mount allows
sound energy to be utilized far more efficiently.
With two angles of tilt to choose from, 7.5° and 15°,
the enclosure can be aimed directly at the audience.
The cabinet is stabilized at its center of gravity—no
wobbling, unwanted tilting, or unintentional turning.
Your choice of DuoTilt™ angle—7.5° or 15°—depends
on the required speaker height and the size of the
room. If you set mid/high units on fully extended
tripods or mounting poles, select 15° to minimize
ceiling reflections.
If you want to address an audience where more
listeners are farther away from the speakers, use
the HK Audio
®
DuoTilt™ at the 7.5° angle.
2 Connecting Components and
Speakers
HK Audio®speaker cords with a diameter of 2 x 2.5
sq. mm are recommended for connecting cabinets,
power amps or powered mixing consoles. Cords are
available in the following lengths:
1. LSC 3, item no.: 193283, 3 m
2. LSC 7, item no.: 193263, 7 m
3. LSC 15, item no.: 193323, 15 m
Recommended Amplifier Power Output
Connect amps rated from 600 W @ 4 W RMS to 800 W
RMS @ 4 W per amp channel to power the PREMIUM
PR:O cabinets. To have enough headroom available
for dynamic musical signals, the power amp should
deliver peak performance of at least 1,200 W @ 4 W
per channel.
Note:
An electrical connection between the cord and input
jack is not established until the Speakon connector
locks into place. Twist the Speakon connector clockwise until it engages.
2.1 PR:O 12, PR:O 15 and PR:O 15 X
in Full-range Mode
Connect the speaker output from the powered mixer
or power amp to the input (IN) of the PR:O 12 or
PR:O 15 (X) full-range speaker cabinet.
Figure 1: 7.5° and 15° angles of tilt
Figure 2.1: Powered mixer and/or mixer and a power amp

7
English
2.2 PR:O 12, PR:O 15 and PR:O 15 X in Satellite
Mode with the PR:O 18 S
First connect the speaker output of the powered mixer
or power amp to the PR:O 18 S subwoofer’s input,
and then connect the subwoofer’s SATELLITE OUT
to the PR:O 12 or PR:O 15 full-range cabinet’s input
(IN).
Note:
The nominal impedance of systems consisting of a
combination of PR:O 18 S and PR:O 12 or PR:O 15 X
cabinets is 4 ohms!
2.3 PR:O 12 M und PR:O 15 X
Connect the monitor power amp’s speaker output
to the PR:O 12 M or PR:O 15 X monitor’s input (IN).
Depending on the type of power amp or powered mixer
that you are using, several PR:O 12 M or PR:O 15 X
monitors can be connected in parallel to one power
amp channel.
Note:
• When two PR:O 12 M or PR:O 15 X monitors are
connected in parallel, overall impedance is 4 ohms.
• When three PR:O 12 M or PR:O 15 X monitors are
connected in parallel, overall impedance is 2.7 ohms.
• When four PR:O 12 M or PR:O 15 X monitors are
connected in parallel, overall impedance is 2 ohms.
Caution:
Do not allow the overall nominal impedance of the
connected monitors to fall below the power amp
channel’s minimum impedance! If it does, you risk
destroying the power amp!
3 Troubleshooting
All speaker cords are connected, but no sound
is audible!
1 Check if the power amp is switched on and the
mixing console is connected to the power amp.
2 Check if the Speakon connectors that are plugged
into the input jacks are locked into place.
Twist the connector clockwise until it engages.
You have set up a satellite system and the mid/high
units are working fine but no low-end signal is heard
from the subwoofers!
1 Check if the PR:O 12, PR:O 15 or PR:O 15 full-range
cabinets are connected to the PR:O 18 S subwoofer’s
SATELLITE OUT. Be sure to connect the cords in
the proper sequence! First connect the speaker
output of the powered mixer or power amp to the
PR:O 18 S subwoofer’s input, and then connect the
PR:O 18 S subwoofer’s SATELLITE OUT to the
PR:O 12, PR:O 15 or PR:O 15 X fullrange cabinet’s
input (IN). For more on this, see the chapter,
Connecting Components and Speakers.
Figure 2.2: Powered mixer and/or mixer and a power amp
(Fullrange)
Figure 2.3: PR:O 12 M and PR:O 15 X monitors in action

PREMIUM PR:O Manual 1.0
4 Technical Specifications
4.1 PR:O 12
Power handling nominal (RMS): 400 W
Power handling program: 800 W
Frequency response -10 dB: 60 Hz - 19 kHz
Frequency response +/- 3 dB: 68 Hz - 19 kHz
Axial sensitivity 1W/1m (half space): 104 dB
Maximum SPL @ 1m , 10% THD: 128 dB
Loudspeaker: 1x 12"
Impedance: 8 ohms
HF driver: 1"
HF protection: Dynamic protection circuitry
Horn characteristics: 60° x 40° CD horn
Crossover frequency, passive crossover: 2 kHz,
12 dB/octave
Connections: 1 Input Speakon
®
NL 4,
1 Parallel Out Speakon
®
NL 4,
Pin assignments: pin 1+ = +; pin 1– = –
Pole-mount cup: HK Audio
®
DuoTilt™
Angles of inclination: 7.5° and 15°
Rigging points: 3 M8 recessed threaded inserts
Weight: 18 kg/ 39.5 lbs.
Dimensions (W x H x D): 39 cm 57 cm x 36 cm
15 1/4" x 22 1/2" x 14 1/4"
4.2 PR:O 12 M
Power handling nominal (RMS): 400 W
Power handling program: 800 W
Frequency response -10 dB: 63 Hz – 19 kHz
Frequency response +/- 3 dB: 70 Hz – 19 kHz
Axial sensitivity 1W/1m (half space): 104 dB
Maximum SPL @ 1m , 10% THD: 128 dB
Loudspeaker: 1x 12"
Impedance: 8 ohms
HF driver: 1"
HF protection: Dynamic protection circuitry
Horn characteristics: 60° x 40° CD horn
Crossover frequency, passive crossover: 2 kHz,
12 dB/octave
Connections: 1 Input Speakon
®
NL 4,
1 Parallel Out Speakon
®
NL 4,
Pin assignments: pin1+ = +; pin 1– = –
Pole-mount cup: none
Setup angle: 30°
Weight: 16 kg/ 35.2 lbs.
Dimensions (W x H x D): 39 cm 55,5 cm x 38 cm
15 1/4" x 21 3/4" x 15"
This is to certify that
HK AUDIO®PREMIUM PR:O
products complies with the provisions of the Directive
of the Council of the European Communities on the
approximation of the laws of the Member States
relating to electromagnetic compatibility (EMC
Directive 89/336/EEC) and the low voltage Directive
(73/23/EEC). This declaration of conformity of the
European Communities is the result of an examination
carried out by the Quality Assurance Department of
STAMER GmbH in accordance with European
Standards EN 50081-1, EN 50082-1and EN 60065
for low voltage, as laid down in Article 10 of the
EMC Directive.
Stamer Musikanlagen
GmbH*
Magdeburger Str. 8
66606 St.Wendel
Lothar Stamer Dipl.Ing.
Managing Director
St.Wendel, 03/10/05
* Stamer Musikanlagen manufactures exclusively
for HK Audio
®
.

9
English
4.3 PR:O 15/ PR:O 15 X
Power handling nominal (RMS): 400 W
Power handling program: 800 W
Frequency response -10 dB: 53 Hz – 19 kHz
Frequency response +/- 3 dB: 60 Hz – 19 kHz
Axial sensitivity 1W/1m (half space): 104 dB
Maximum SPL @ 1m , 10% THD: 128 dB
Loudspeaker: 1x 15"
Impedance: 8 ohms
HF driver: 1"
HF protection: Dynamic protection circuitry
Horn characteristics: 60° x 40° CD Horn
Crossover frequency, passive crossover: 2 kHz,
12 dB/octave
Connections: 1 Input Speakon
®
NL 4
1 Parallel Out Speakon
®
NL 4,
Pin assignments: pin 1+ = +; pin 1– = –
Pole mount: HK Audio
®
DuoTilt™
Angles of tilt: 7.5° and 15°
Rigging points: 3 M8 recessed threaded inserts
Weight:
22 kg/ 48.4 lbs. (PR:O 15)
21 kg/ 46.2 lbs. (PR:O 15 X)
Dimensions (W x H x D):
47 cm x 61,5 cm x 41 cm (PR:O 15)
18 1/2" x 24 1/4" x 16 1/4" (PR:O 15)
47 cm x 61,5 cm x 44,5 cm (PR:O 15 X)
18 1/2" x 24 1/4" x 17 1/2" (PR:O 15 X)
4.4 PR:O 18 S
Power handling nominal (RMS): 500 W
Power handling program: 1000 W
Frequency response -10 dB: 38 Hz – 150 Hz
(via internal crossover)
Frequency response +/- 3 dB: 48 Hz – 150 Hz
(via internal crossover)
Axial sensitivity 1W/1m (half space): 104 dB
Maximum SPL @ 1m (half space): 129 dB
Loudspeaker: 1x 18"
Impedance: 4 ohms
Crossover frequency, passive crossover: 150 Hz,
12dB/octave
Connections: 1 Input Speakon
®
NL 4,
Pin assignments: pin 1+ = +; pin 1– = –
1 Satellite Out Speakon
®
NL 4,
Pin assignments: pin 1+ = +; pin 1- = -
Pole mount: M20 thread base plate
Castors: 4x 100 mm (optional)
Weight: 39 kg/ 85.5 lbs.
Dimensions (W x H x D): 53 cm x 61 cm x 64 cm
20 3/4" x 24" x 25 1/4"

DRAWING-NUMBERS
EXAMPLE
HK0106-EX-R01-1A
PROJECT-NR.:
HK = HK AUDIO
HU = HUGHES&KETTNER
MP = MINDPRINT
CHARACTER:
BL = SHEET METAL / BLECH
EX = EXPLODED DRAWING / EXPLOSIONSZEICHNUNG
HZ = CABINET / HOLZGEHÄUSE
KU = PLASTIC / KUNSTSTOFF
LP = PCB / LEITERPLATTEN
SO = MISCELLANEOUS / SONSTIGES
SP = SCHEMATIC / SCHALTPLÄNE
TR = TRANSFORMER / TRANSFORMATOR
GK = WIRING DIAGRAM / GERÄTEVERKABELUNG
DEPARTMENT:
R = R&D
SERIAL NUMBER
VERSION
REVISION

Stand
Standard for single wire confection.
16 B 150 638 I - 485 W Z I 1015
style 1015 according UL specifications
I = completely insulated with black shrinktube or appropriate sleeve
IT = partly insulated; only crimp connection insulated.
no marking = without insulation
Z = with additional junction
no marking = without additional junction
W = angled faston
no marking = straight faston
17. Jun 04
Faston connector brass tin-plated DIN 46245
638 = 6,3 * 0,8 [mm]
488 = 4,8 * 0,8 [mm]
485 = 4,8 * 0,5 [mm]
288 = 2,8 * 0,8 [mm]
285 = 2,8 * 0,5 [mm]
abiso = 5mm bared and tin-plated (teilabzug)
text for special constructions, (for example. 4mm ringshaped faston)
the larger faston connector always mentioned at first. (Nathan drawing number controlling)
lenght in mm within a 50 mm raster
colour
B = black (phase conductor)
R = red
BR = brown
BL = blue (neutral conductor)
= white
G = yellow-green (ground bonding/ earthing connection)
if fully insulated (I) insulation with blue shrinktube
if partly insulated (IT) use IF 602 485 .
if fully insulated (I) insulation with blue shrinktube
if partly insulated (IT) use IF 602 485
cross section
16 = AWG 16 (prefered usage)
Q1.5 = H07VK 1,5mm² (prefered usage)
wire designation:
P + lfd Nr. = AWG single wire black, red, blue, brown or white
E + lfd Nr. = AWG single wire green- yellow
L + lfd N
FQL + lfd Nr. = crossover wiring H07VK
Regarding special wirings like wiring harness or similar, drawings will be prepared and appropriate
. = twisted AWG double wire, lenght specification always in twisted condition
drawing numbers will be stored in the article archive.

Confidential, for authorized service technicians only! Do not disclose
this information to or share these documents with third parties.
TECHNICAL SERVICE:
Stamer Musikanlagen GmbH • Magdeburger Str. 8 • 66606 St.Wendel • Germany
Music & Sales P.E. GmbH • Leipziger Str. 3 • 66606 St.Wendel • Germany
Service Documents

Schwingspule als Ersatzteil:
E 994190-SICA Membrana CD 83.26
24E 994172
16E 974491
20E 976159
2E 400196
HK0205-HZ-R01-1B
17E 974499
11E 974314
13 E 974322
25E 994173
3 E 520113
17
14 E 974419
4E 972008
8E 974108
10E 974233
15E 974475
19E 976072
20
5E 972047
6E 974011
18 E 976009
9 E 974145
26E 994175
12E 974315
INDEX
1B-160707 update for service manual C. Loris
ÄNDERUNG
ZEICHNER
1 E 1028
HK0205-EX-R01-1B
21 E 976174
7 E 974013
66606 St. Wendel / Germany
ZEICHNUNGS-NR.:
HK0205-EX-R02-1B
ERSTELLT VON:
C. LORIS
GEPRÜFT/
FREIGEGEBEN VON:
WERKSTOFF:
DATEINAME:
HK0205-EX-R02-1B-GESAMT
TITEL:
PR:O 15
EXPLODED DRAWING
COMPLETE
OBERFLÄCHE:
VERSION:
AM:
16.07.07
AM:
REVISION:
1
BLATT:
B
1
BLÄTTER
2

pos. no. part-no. 1 description Beschreibung quantity
1 1028 front grille assembly Frontgitterbaugruppe 1
2 400196 wooden cabinet PR:O15 Holzgehäuse PR:O15 1
3 520113 passive crossover PR:O 15 Freqw. PR:O 15 1
4 972008 damping wool Dämmwolle Hochbauschvlies 1
5 972047 PE-foam tube PE-Schaumstoff-Röhrchen 14
6 974011 hexagon socket head cap screw, M6x25, black Inbusschraube M6*25 sw 3
7 974013 hexagon socket countersunk head screw, M6x20, black Inbussenkschraube M6x20 sw 6
8 974108 plastic PCB spacer, 6.2x10x15, Polyamid black Dist.Hülse PE 6,2*10*15 [mm] 1
9 974145 ABC-Spax-S chipboard screw, panhead Z, 5x25, black Pan Head-Z ABC-Spax sw 5*25 4
10 974233 washer, form A, D=6.4mm, zinc plated Unterleg-Scheibe 6,4 vz 3
11 974314 ABC-Spax-S screws for backwall, 4x40, black Rückwandschraube, 4*40 sw 4
12 974315 ABC-Spax-S screws for backwall, 4x50, black Rückwandschraube, 4*50 sw 2
13 974322 ABC-Spax-S screws for backwall, 4x20, black Rückwandschraube, 4*20 sw 6
14 974419 ABC-Spax-S screws for backwall, 4x30, black Rückwandschraube, 4*30 sw 4
15 974475 hexagon socket head cap screw, M6x50, black Inbusschraube M6*50 sw 1
16 974491 Furniture grasp scr. M4*20 black Möbelgriffschraube M4*20 sw 4
17 974499 hexagon socket countersunk head screw, M8x20, black Inbussenkschraube M8x20 sw 3
18 976009 rubber foot D38*H11 [mm] Gummifuss D38*H11 [mm] 4
19 976072 rubber bumper D=15/13 H=10 Gummi Bumper D=15/13 H=10 1
20 976159 plastic dish Premium One Griffinnenschale Premium One 2
21 976174 flange for speaker stand, plastic, DuoTilt MKII Ständerflansch zweifach MKII, Kunststoff, schwarz 1
22* 982037 sealing tape 2x6mm Iso-Zell-Band fadenvers. 2*6mm 3,19 lfdm
23* 988165 1k polyurethane glue, 310mltrs. tube Polyurethan 1-K Kleber, 310ml Kartusche xxx
24 994172 SICA Horn 1" Tromba 200x160 SICA Horn 1" Tromba 200x160 1
25 994173 SICA CD 83.26/380TW-8Ohms Z009480 HE 1" Compr. Driver SICA CD 83.26/380TW-8Ohms Z009480 HE 1" Compr.
1
Driver
26 994175 Celestion Truvox 1525 8Ohms Celestion Truvox 1525 8Ohms 1
INDEX
1B-160707 update for service manual C. Loris
ÄNDERUNG
ZEICHNER
66606 St. Wendel / Germany
ZEICHNUNGS-NR.:
HK0205-EX-R02-1B
ERSTELLT VON:
C. LORIS
GEPRÜFT/
FREIGEGEBEN VON:
WERKSTOFF:
DATEINAME:
HK0205-EX-R02-1B-GESAMT
TITEL:
PR:O 15
EXPLODED DRAWING
COMPLETE
OBERFLÄCHE:
VERSION:
AM:
16.07.07
AM:
REVISION:
1
BLATT:
B
2
BLÄTTER
2

pos. no. part-no. 1 description Beschreibung quantity
1 970335 front grille Streckgitter 1
2 972085 acoustic foam anthracite 15mm Akustikschaum Anthrazit 15mm 1
3 974158 snapon retaining ring (for logo) Schnellbefestiger f. Logo 1
4 980105 logo ´HK Audio´ 55x55 mm Logo ´HK Audio´ 55x55 mm 1
1 E 970335
HK0205-BL-R01-1A
INDEX
ÄNDERUNG
1B-280607 update for service manual
HK0205-SO-R02-1A
ZEICHNER
C. Loris
3 E 974158
2E 972085
TITEL:
PR:O 15
4E 980105
66606 St. Wendel / Germany
ZEICHNUNGS-NR.:
ERSTELLT VON:
GEPRÜFT/
FREIGEGEBEN VON:
WERKSTOFF:
HK0205-EX-R01-1B 1
C. LORIS
EXPLODED DRAWING
FRONT GRILLE
VERSION:
AM:
AM:
OBERFLÄCHE:
28.06.07
REVISION:
BLATT:
1
B
1
BLÄTTER
DATEINAME:
HK0205-EX-R01-1B-FRONTGITTER

4321
D
R1
C1
+
JP1
FASTON-4.8-ST
MKP-2.7u/250V
INPUT HIGH OUT
L1
–
JP2
C
B
FASTON-4.8-ST
0.68mH/1.00mm_LU
6R8/20W_AX
C2
MKP-3.3u/250V
L3
1.80mH/0.80mm_LI
C3
MKP-18u/250V
R2
27R/10W_AX
Z1
24V/18W_15/41
–
JS3
+
JS4
+
JS5
MID/LOW OUT
Sica CD83.26
E994173
HK 15" Custom
E994xxx
D
C
B
A
All rights reserved. No part of this schematic may be reproduced, stored in a retrieval system, transmitted in any form or
by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior permission of the author.
1 2 3 4
–
JS6
NA = not assembled part ----- EX = exclusive part, no alternative allowed
HT = high temperature part, assemble with distance from PCB
Title:
HK0205 -- PR:O15
66606 St. Wendel / Germany
Number: Version: Revision:
Drawn by: Date:
Michael Bohlender
Thorsten Bender
PCB No.:
Filename: HK0205-SP-R01-1B-DTP-Schaltplan.sch
HK0105-LP-R01 (always use latest revision)
Crossover Circuit
1HK0205-SP-R01-1B B
18.07.2005
Date:
18.07.2005
Page:
1Checked by:
1
Pages
A

TITEL:
HK0205- PR:O Serie
INDEX
ÄNDERUNG
ZEICHNER
66606 St. Wendel / Germany
ZEICHNUNGS-NR.:
ERSTELLT VON:
GEPRÜFT/
FREIGEGEBEN VON:
WERKSTOFF:
DATEINAME:
HK0205-LP-R01-1C 1 C
Michael Bohlender
Michael Bohlender
FR4, einseitig, 1.6mm HAL, Lötstop einseitig
HK0205-LP-R01-1C-Bestueckung
Bestückungsplan Frequenzweiche
OBERFLÄCHE:
VERSION:
AM:
18.07.2005
AM:
18.07.200511
REVISION:
BLATT:
BLÄTTER