
Quick Start Essential
Parameters
WJ200
Quick Start
b037 – Unlocks parameters (default 04)
A001 – Frequency (Speed) Source (default 02)
A002 – Run Command Source (default 02)
b012 – Motor nameplate current (default varies)
b091 – Stop Mode (default 00)
H004 – Motor nameplate poles (default 4 poles)
F001 – Keypad Speed setting (default 00.00)
F002 – Acceleration time (default 10 seconds)
F003 – Deceleration time (default 10 seconds)

To Unlock All the Parameters To Set the Motor Current
1
Press ESC to enter programming mode
2
Press ESC until parameter b001 is on the
display of your drive
3
Press the UP key until b037 is reached
4
Then press the SET key to enter the b037
parameter
5
Now you can change the 04 to 00 using the
down key
6
Press the SET key to save the data
Now you have unleashed your WJ200 drive!
1
Press ESC to enter programming mode
2
Press ESC until parameter b001 is on the
display of your drive
3
Press the UP key until b012 is reached
4
Then press the SET key to enter the b012
parameter
5
Now you can set your motor nameplate
current using the UP and Down keys
6
Press the SET key to save the data