How it Works
Hitachi
Loading...
VTFX6407AS
User Manual
77 pgs1.39 Mb0
Owner’s Manual
54 pgs2.84 Mb0

Hitachi VT-FX6407AS User Manual

FOR YOUR SAFETY - 1 -
VIDEO CASSETTE RECORDER
VT-FX6407AS
Owner's manual
Using these quality features:
• The VCR Plus+* programming system allows you to program the VCR for timer recording by simply entering a PlusCode* number. * VCR Plus+ and PlusCode are trademarks of Gemstar Development Corporation.
The VCR Plus+ system is manufactured under license from Gemstar Development Corporation.
• Auto Set Up system automatically tune in broadcast channels
• S-VHS Quasi Playback allows you to playback a tape that is recorded by S-VHS type.
• Super index allows you to quickly search for a program you want to view or the point from which you want to start recording on the tape.
• Super rewind and fast forward
• Multi-channel TV sound (MTS).
• 8-program/1 month preset recording.
• Auto tracking system automatically adjusts the tracking so the picture is optimized.
• Frequency synthesized tuner provides easy, preset tuning of up to 68 broadcast TV channels and 125 cable channels.
• VHS Hi-Fidelity sound in playback.
• On-screen programming guide.
• With display, VCR Plus+ can be programmed to record without turning power on.
• Easy cursor operation
• Illuminated remote control for use with your VCR
Auto Set Up System - simply plug in all leads and press the POWER button.
As an ENERGY STAR" Partner, HITACHI Home Electronics (America), Inc. has
determined that this product meets the ENERGY STAR' guidelines for energy efficiency.
HITACHI HOME ELECTRONICS (AMERICA), INC.
1855 Donroch Court San Diego, CA 92173 Tel. 619-661-3441
HITACHI (HSC) CANADA INC.
6740 Campobello Road Mississauga, Ontario L5N 2L8 CANADA Tel. 905-821-4545
FOR YOUR SAFETY - 2 -
TABLE OF CONTENT
FOR YOUR SAFETY..................................................................................................................3
IMPORTANT SAFEGUARDS.....................................................................................................4
USE ........................................................................................................................................6
SERVICE ................................................................................................................................6
CUSTOMER CONTROLS ..........................................................................................................7
REMOTE OPERATION ............................................................................................................10
Install batteries in the remote control ....................................................................................10
Operating in the remote control.............................................................................................11
CASSETTE TAPES..................................................................................................................12
Types ....................................................................................................................................12
Safety tabs prevent erasure..................................................................................................12
Insertion ................................................................................................................................12
Removal................................................................................................................................12
BASIC ANTENNA HOOKUP [A]...............................................................................................13
ADVANCED ANTENNA HOOKUP -AV HOOKUP [B] ..............................................................14
BASIC CABLE HOOKUP [C]....................................................................................................14
ADVANCED CABLE HOOKUP -AV HOOKUP [D] ...................................................................15
BASIC CABLE HOOKUP -WITH CABLE BOX [E]....................................................................16
ADVANCED CABLE HOOKUP -WITH CABLE BOX [F]...........................................................17
ADVANCED CABLE HOOKUP -WITH CABLE BOX AND SPLITTER [G] ...............................18
AUTO SET UP..........................................................................................................................19
Setting the channel automatically .........................................................................................19
SETTING THE CLOCK ............................................................................................................20
Tips .......................................................................................................................................20
To set the clock.....................................................................................................................20
PRE-TUNING THE VCR TUNER .............................................................................................23
Presetting the received channels without using a cable box (Hookups [A], [B], [C], or [D]) ..23
To add or erase channels .....................................................................................................25
Auto blue setting ...................................................................................................................27
PLAYBACK...............................................................................................................................28
To playback a recorded tape.................................................................................................28
Rewinding the tape ...............................................................................................................29
Rewinding or fast forwarding a tape at high speed ...............................................................30
To remove noise from the picture .........................................................................................31
SPECIAL PLAYBACK EFFECTS .............................................................................................32
Variable speed playback.......................................................................................................32
Still Playback (Pause) ...........................................................................................................32
Frame Advance.....................................................................................................................33
Slow motion ..........................................................................................................................33
Visual Search........................................................................................................................34
Choosing a mode for audio playback....................................................................................35
How to select playback audio................................................................................................35
SHUTTLE CONTROL...............................................................................................................36
Using the shuttle ring ............................................................................................................36
USING THE "SUPER INDEX" FEATURE.................................................................................37
What is SUPER INDEX?.......................................................................................................37
Locating the beginning of a recorded program (INDEX SEARCH) .......................................37
Locating the beginning of a blank section (BLANK SEARCH) ..............................................38
FOR YOUR SAFETY - 3 -
Switching rewind or fast forward to visual search (EASY VIEW) ..........................................40
Skipping unnecessary scenes (SKIP PLAYBACK) ...............................................................40
VIEWING THE ON-SCREEN DISPLAY ...................................................................................41
Switching between the clock, time counter and time of remaining tape................................41
INDEX WITH THE TIME COUNTER........................................................................................42
To find specific sections on a tape........................................................................................43
RECORDING A PROGRAM.....................................................................................................44
Basic recording steps............................................................................................................44
RECORDING A PROGRAM -RECORDING TIPS....................................................................47
To watch one program while recording another....................................................................47
To change the channel being recorded.................................................................................47
To record a Second Audio Program (SAP) ...........................................................................48
Stereo vs. mono sound.........................................................................................................50
INSTANT RECORDING TIMER ...............................................................................................50
Using the Instant Recording Timer (IRT) ..............................................................................50
DELAYED RECORDING..........................................................................................................51
Setting the VCR to record later .............................................................................................51
Delayed Recording Steps .....................................................................................................52
USING THE VCR PLUS+ SYSTEM FOR RECORDING..........................................................58
About the VCR Plus+ system................................................................................................58
Channel setup.......................................................................................................................58
EASY DELAYED RECORDING WITH THE VCR PLUS+ SYSTEM ........................................59
VCR Plus+ setup - Channel setup ........................................................................................59
Using the VCR Plus+ system to record a program (by using TV screen)..............................61
Using the VCR Plus+ system to record a program (by using VCR's display)........................64
PROGRAM REVIEW................................................................................................................67
Reviewing what you have programmed................................................................................67
USING THE VCR REMOTE TO CONTROL YOUR TV............................................................68
Using the VCR remote to control your Hitachi TV.................................................................68
INTEGRATING YOUR STEREO SYSTEM WITH YOUR VCR ................................................69
Hookup .................................................................................................................................69
To record from stereo ...........................................................................................................69
COPYING TAPES FROM A CAMCORDER.............................................................................70
Hook-up ................................................................................................................................71
To copy from a camcorder....................................................................................................71
COPYING FROM ONE VCR TO ANOTHER VCR (DUBBING)................................................72
Hookup .................................................................................................................................72
To copy from one VCR to another VCR................................................................................72
PROBLEM GUIDE / MAINTENANCE.......................................................................................74
Problem guide.......................................................................................................................74
Maintenance .........................................................................................................................74
Guide indications in VCR display and OSD screen...............................................................75
TECHNICAL SPECIFICATIONS ..............................................................................................76
FOR YOUR SAFETY
POWER SUPPLY: AC 120V, 60 Hz ONLY. The POWER button turns the VCR on and off, leaving the clock/timer unaffected. If the unit is to be left unattended for a long period, it is recommended that the unit be completely switched off and unplugged. Illustrated below is the label on the back of your unit.
IMPORTANT SAFEGUARDS - 4 -
This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any inside part of this unit.
This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: Many television programs and films are copyrighted. In certain circumstances, copyright law may
apply to private in-home videotaping of copyrighted materials.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
Caution to the user: Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
"Note to CATV system installer: This reminder is provided to call the CATV system installer's
attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical".
IMPORTANT SAFEGUARDS
In addition to the careful attention devoted to quality standards in the manufacture of your video product, safety is a major factor in the design of every instrument. But, safety is your responsibility too. This page lists important information that will help to assure your enjoyment and proper use of a Video Cassette Recorder and accessory equipment. Please read it carefully before operating your video product and keep it in a handy place for future reference.
INSTALLATION
1 Read and Follow Instructions -- All the safety and operating instructions should be read before the video
product is operated. Follow all operating and use instructions.
2 Retain Instruction -- The safety and operating instructions should be retained for future reference. 3 Heed Warnings -- Comply with all warnings on the video product and in the operating instructions. 4 Polarized Plug -- This video product is equipped with a polarized alternating current line plug (a plug having
IMPORTANT SAFEGUARDS - 5 -
one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. To prevent electric shock do not use this polarized plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted without blade exposure. If you need an extension, use a polarized cord.
5 Power Sources -- This video product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply to your home, consult your video dealer or local power company. For video products intended to operate from battery power, or other sources, refer to the operating instructions.
6 Overloading -- Do not overload wall outlets and extension cords as this can result in a risk of fire or electric
shock. Overloaded AC outlets and extension cords are dangerous, and so are frayed power cords, damaged or cracked wire insulation and broken plugs. They may result in a shock or fire hazard. Periodically examine the cord and have it replaced by your service technician if appearance indicates damage or deteriorated insulation.
7 Power Cord Protection -- Power supply cords should be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
8 Ventilation -- Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the
video product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the video product on a bed, sofa, rug or other similar surface. This video product should never be placed near or over a radiator or heat register. This video product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the video product manufacturer's instructions have been followed.
9 Attachments -- Do not use attachments unless recommended by the video product manufacturer as they may
cause hazards.
Caution: Maintain electrical safety. Powerline operated equipment or accessories connected to this unit should
bear the UL listing mark or CSA certification mark on the accessory itself and should not have been modified so as to defeat the safety features. This will help avoid any potential hazard from electric shock or fire. If in doubt, contact qualified service personnel.
10 Water and Moisture -- Do not use this video product near water - for example, near a bath tub, wash bowl,
kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.
11 Accessories -- Do not place this video product on an unstable card, stand, tripod, bracket or table. The video
product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket or table recommended by the manufacturer, or sold with the video product. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer.
11A An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart combination to overturn.
IMPORTANT SAFEGUARDS - 6 -
12 Outdoor Antenna Grounding -- If an outside antenna or cable system is connected to the video product, be
sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built­up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See example below.
EXAMPLE OF ANTENNA GROUNDING
13 Power Lines -- An outside antenna system should not be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching or approaching such power lines or circuits as contact with them might be fatal. Installing an outdoor antenna can be hazardous and should be left to a professional antenna installer.
USE
14 Cleaning -- Unplug this video product from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
15 Object and Liquid Entry -- Never push objects of any kind into this video product through openings as they
may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the video product.
16 Lightning -- For added protection for this video product during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable-system. This will prevent damage to the video product due to lightning and power-line surges.
SERVICE
17 Servicing -- Do not attempt to service this video product yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
18 Conditions Requiring Service -- Unplug this video product from the wall outlet and refer servicing to
CUSTOMER CONTROLS - 7 -
qualified service personnel under the following conditions. a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the video product. c. If the video product has been exposed to rain or water. d. If the video product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its normal operation. e. If the video product has been dropped or the cabinet has been damaged. f. When the video product exhibits a distinct change in performance - this indicates a need for service.
19 Replacement Parts -- When replacement parts are required, have the service technician verify that the
replacements he uses have the same safety characteristics as the original parts. Use of replacements specified by the video product manufacturer can prevent fire, electric shock or other hazards.
20 Safety Check -- Upon completion of any service or repairs to this video product, ask the service technician to
perform safety checks recommended by the manufacturer to determine that the video product is in safe operating condition.
CUSTOMER CONTROLS
VCR Customer Controls
Item No. Function
1 2 3 4 5 6
7 8
POWER button Infrared receiver Cassette compartment STOP/EJECT button PLAY/STILL button CHANNEL (channel up/down)/ TRACKING buttons Shuttle Ring REC/IRT button
CUSTOMER CONTROLS - 8 -
VCR Display 9
10
11 12 13 14
15 16
17
AM/PM indicators Time, Time counter, Tape remaining or VCR mode indicator "-" appears  PLAY -- playbackduring reverse  SRCH -- double-speed  direction  play, visual viewing  search and skip playback SLOW -- slow play REW -- rewind S:REW -- high speed rewind FF -- fast forward S:FF -- high speed fast forward STILL -- play pause and frame advance REM (tape remaining time) indicator VCR, operate mode Audio indicators
REC -- record (flashes during
record pause Tape-in indicator TV channel or Auxiliary (L1/L2)
Delayed recording indicator
Accessories supplied Check and identify the accessories supplied.
If any are missing or appear damaged, consult your dealer.
 Remote Control Cable for connecting Batteries for remote this VCR to a TV control handset (R6)
VCR Customer Controls
Item No. Function
CUSTOMER CONTROLS - 9 -
18
19
20
21
22
23
AUDIO IN L, R jacks
VIDEO IN jack
IN FROM ANT. - signal input
OUT TO TV - signal out to TV
VIDEO OUT jack
AUDIO OUT L, R jacks
Remote Control Customer Controls
Item No. Function
1 2 3 4
5 6 7 8
9 10 11 12 13 14
15
16 17
REW button - fast rewind or search
DISPLAY- to recall on-screen display
TAPE SPEED button - select the recording speed
you set the remote to control one of the
SUPER INDEX buttons - to use the
Transmission window
POWER button
CH (channel up/down) button
VOL button - increase or decrease
the audio volume
Cursor buttons
REC - record button
GUIDE - to recall OSD menu
PROGRAM (programming) button
CLEAR - clears time counter
100/ENT button
VCR/TV mode select button
SP or EP
VCR, TV - Device buttons let
two devices.
EJECT button
SUPER INDEX function
REMOTE OPERATION - 10 -
18 19 20 21 22
23 24 25
26
When you press any of illumination buttons, the illumination will turn on. The illumination goes off 5 seconds later automatically, if you do not press the buttons.
F.FWD button - fast forward or search SLOW button - for slow motion picture
LAST CH button - Switches to the TV
channel you watched previously during
PLAY button - playback
PAUSE/ENTER buttons
STOP button - stops play/record
function
Number buttons
AVX button - select LINE
the current viewing session.
F.ADV button
REMOTE OPERATION
Install batteries in the remote control
The remote control requires two "AA" batteries.
1 Insert your fingertip into the notch and push the battery compartment lid to remove it.
Note: When replacing the batteries, remove the old batteries and keep the POWER button depressed for 10
seconds before inserting fresh batteries.
REMOTE OPERATION - 11 -
Hold for 10 Seconds
2 Install batteries.
• Align the positive (+) and negative (-) polarity marks on the batteries with those indicated on the remote control.
3 Replace the lid.
Operating in the remote control
Operating the VCR: 1 Make sure there is no obstacle between the remote control and VCR's infrared receiver.
Note: You cannot operate the VCR if there is an obstacle (for example, coffee table, sofa, etc) between the VCR
and remote control.
2 Point the remote control at the VCR's infrared receiver and press the required button on the remote control.
Note: If the remote does not work even at close range, try replacing the batteries with two fresh "AA" batteries.
CASSETTE TAPES - 12 -
CASSETTE TAPES
Types
Only use video cassettes with the mark in this VCR.
The table shows the recording time of different cassettes.
• To get the best quality picture record at standard recording speed (SP)
• This VCR does not record at the LP speed, but it can play cassette that were recorded at the LP speed.
Safety tabs prevent erasure
The VCR automatically enters the playback mode when a cassette without its safety tab is inserted. The VCR won't record on a tape without a safety tab and the cassette will be ejected if the REC or REC/IRT button is pressed. Be sure to check the safety tab before inserting a cassette.
Insertion
Push the video cassette gently into the slot on the front of the VCR.
• The VCR automatically turns on and the "Tape-In" indicator
turns on when the cassette is in place..
Removal
Press the STOP/EJECT button on the VCR.
The cassette will come partially out of the compartment so you can pull it out.
• The "Tape-In" indicator
• The cassette can be ejected with the power on or off.
turns off.
BASIC ANTENNA HOOKUP [A] - 13 -
BASIC ANTENNA HOOKUP [A]
WITH THIS HOOKUP
YOU CAN...
• WATCH AVAILABLE TV CHANNELS
• RECORD AND WATCH THE SAME CHANNEL
• RECORD ONE CHANNEL AND WATCH ANOTHER
Caution: Do not connect to the mains supply socket before connecting all leads (ss page 17).
Basic Hookup with Antenna: RF Hookup
* PURCHASED SEPARATELY
TABLE A
FUNCTION CHANNEL SELECTION VCR indicator
(Press the VCR/TV mode
select button to turn the VCR indicator on or off.)
TV VCR
Select and Watch Channels
using TV
Select and Watch Channels
using VCR Record and Watch the Same Channel
Record One Channel
Watch Another
Watch Playback of a Tape 3 or 4 ON
Switch the RF Channel
When the VCR is on, its video signal can come into your TV on either channel 3 or channel 4. You need to select the appropriate channel.
Select Channel
to Watch
3 or 4 Select Channel to Watch ON
3 or 4 Select Channel to Record ON
Select Channel
to Watch
Select Channel to Record OFF
OFF
(TV mode)
(VCR mode)
(VCR mode)
(TV mode)
(VCR mode)
ADVANCED ANTENNA HOOKUP -AV HOOKUP [B] - 14 -
• When the power is turned on, press the POWER button to turn it off. Press the PLAY button on front of the VCR. Pressing the CHANNEL
the VCR's display. Display the channel which is not used by a commercial channel in your area.
button alternates between RFCH-03 (channel 3) and RFCH-04 (channel 4) in
ADVANCED ANTENNA HOOKUP -AV HOOKUP [B]
WITH THIS HOOKUP
YOU CAN...
• WATCH AVAILABLE TV CHANNELS
• RECORD AND WATCH THE SAME CHANNEL
• RECORD ONE CHANNEL AND WATCH ANOTHER
Caution: Do not connect to the mains supply socket before connecting all leads (ss page 17).
* PURCHASED SEPARATELY
TABLE B
FUNCTION CHANNEL SELECTION VCR indicator
(Press the VCR/TV mode
select button to turn the VCR indicator on or off.)
TV VCR
Select and Watch Channels
using TV
Select and Watch Channels
using VCR Record and Watch the Same Channel
Record One Channel
Watch Another
Watch Playback of a Tape AUX or VIDEO
Select Channel
to Watch
AUX or VIDEO Select Channel to Watch
AUX or VIDEO Select Channel to Record
Select Channel
to Watch
Select Channel to Record OFF
OFF
(TV mode)
(TV mode)
BASIC CABLE HOOKUP [C]
ADVANCED CABLE HOOKUP -AV HOOKUP [D] - 15 -
WITH THIS HOOKUP
YOU CAN...
• WATCH AVAILABLE CABLE CHANNELS
• RECORD AND WATCH THE SAME CHANNEL
• RECORD ONE CHANNEL AND WATCH ANOTHER
Caution: Do not connect to the mains supply socket before connecting all leads (ss page 17).
TABLE C
FUNCTION CHANNEL SELECTION VCR indicator
(Press the VCR/TV mode
select button to turn the VCR indicator on or off.)
TV VCR
Select and Watch Channels
using TV
Select and Watch Channels
using VCR Record and Watch the Same Channel
Record One Channel
Watch Another
Watch Playback of a Tape 3 or 4 ON
Switch the RF Channel
When the VCR is on, its video signal can come into your TV on either channel 3 or channel 4. You need to select the appropriate channel.
• When the power is turned on, press the POWER button to turn it off. Press the PLAY button on front of the VCR. Pressing the CHANNEL
the VCR's display. Display the channel which is not used by a commercial channel in your area.
Select Channel
to Watch
3 or 4 Select Channel to Watch ON
3 or 4 Select Channel to Record ON
Select Channel
to Watch
button alternates between RFCH-03 (channel 3) and RFCH-04 (channel 4) in
Select Channel to Record OFF
OFF
(TV mode)
(VCR mode)
(VCR mode)
(TV mode)
(VCR mode)
ADVANCED CABLE HOOKUP -AV HOOKUP [D]
WITH THIS HOOKUP
YOU CAN...
• WATCH AVAILABLE CABLE CHANNELS
BASIC CABLE HOOKUP -WITH CABLE BOX [E] - 16 -
• RECORD AND WATCH THE SAME CHANNEL
• RECORD ONE CHANNEL AND WATCH ANOTHER
Caution: Do not connect to the mains supply socket before connecting all leads (ss page 17).
* PURCHASED SEPARATELY
TABLE D
FUNCTION CHANNEL SELECTION VCR indicator
(Press the VCR/TV mode
select button to turn the VCR indicator on or off.)
TV VCR
Select and Watch Channels
using TV
Select and Watch Channels
using VCR Record and Watch the Same Channel
Record One Channel
Watch Another
Watch Playback of a Tape AUX or VIDEO
Select Channel
to Watch
AUX or VIDEO Select Channel to Watch
AUX or VIDEO Select Channel to Record
Select Channel
to Watch
Select Channel to Record OFF
OFF
(TV mode)
(TV mode)
BASIC CABLE HOOKUP -WITH CABLE BOX [E]
WITH THIS HOOKUP
YOU CAN...
• WATCH AVAILABLE CABLE CHANNELS
• RECORD AND WATCH THE SAME CHANNEL
YOU CAN'T...
• RECORD ONE CHANNEL AND WATCH ANOTHER
ALL CHANNEL SELECTIONS MUST BE MADE AT THE CABLE BOX. BE SURE TO CONSULT YOUR CABLE BOX MANUAL FOR THE CABLE BOX OUTPUT CHANNEL.
ADVANCED CABLE HOOKUP -WITH CABLE BOX [F] - 17 -
Caution: Do not connect to the mains supply socket before connecting all leads (ss page 17).
TABLE E
FUNCTION CHANNEL SELECTION VCR indicator
(Press the VCR/TV mode
select button to turn the VCR indicator on or off.)
TV VCR CABLE BOX
Select and Watch Channels
using TV
Select and Watch Channels
using VCR Record and Watch the Same Channel
Record One Channel
Watch Another
Watch Playback of a Tape 3 or 4 ON
Switch the RF Channel
When the VCR is on, its video signal can come into your TV on either channel 3 or channel 4. You need to select the appropriate channel.
• When the power is turned on, press the POWER button to turn it off. Press the PLAY button on front of the VCR. Pressing the CHANNEL
the VCR's display. Display the channel which is not used by a commercial channel in your area.
Select Cable Box
Output Channel
3 or 4 Select Cable Box
Output Channel
3 or 4 Select Cable Box
Output Channel
button alternates between RFCH-03 (channel 3) and RFCH-04 (channel 4) in
Select Channel
to Watch
Select Channel
to Watch
Select Channel
to Watch
OFF
(TV mode)
ON
(VCR mode)
ON
(VCR mode)
(VCR mode)
ADVANCED CABLE HOOKUP -WITH CABLE BOX [F]
WITH THIS HOOKUP
YOU CAN...
• WATCH AVAILABLE CABLE CHANNELS
• RECORD AND WATCH THE SAME CHANNEL
YOU CAN'T...
• RECORD ONE CHANNEL AND WATCH ANOTHER
ALL CHANNEL SELECTIONS MUST BE MADE AT THE CABLE BOX. BE SURE TO CONSULT YOUR CABLE BOX MANUAL FOR THE CABLE BOX OUTPUT CHANNEL.
Caution: Do not connect to the mains supply socket before connecting all leads (ss page 17).
ADVANCED CABLE HOOKUP -WITH CABLE BOX AND SPLITTER [G] - 18 -
Advanced Hookup with Cable Box: AV Hookup
* PURCHASED SEPARATELY
TAB LE F
FUNCTION CHANNEL SELECTION VCR indicator
(Press the VCR/TV mode
select button to turn the VCR indicator on or off.)
TV VCR CABLE BOX
Select and Watch Channels
using TV
Select and Watch Channels
using VCR Record and Watch the Same Channel
Record One Channel
Watch Another
Watch Playback of a Tape AUX or VIDEO
Select Cable Box
Output Channel
AUX or VIDEO Select Cable Box
Output Channel
AUX or VIDEO Select Cable Box
Output Channel
Select Channel
to Watch
Select Channel
to Watch
Select Channel
to Watch
(TV mode)
ADVANCED CABLE HOOKUP -WITH CABLE BOX AND SPLITTER [G]
WITH THIS HOOKUP
YOU CAN...
• WATCH AVAILABLE CABLE CHANNELS
• RECORD AND WATCH THE SAME CHANNEL
• RECORD ONE CHANNEL AND WATCH ANOTHER
OFF
TO RECORD, ALL CHANNEL SELECTIONS MUST BE MADE AT THE CABLE BOX. BE SURE TO CONSULT YOUR CABLE BOX MANUAL FOR THE CABLE BOX OUTPUT CHANNEL.
Caution: Do not connect to the mains supply socket before connecting all leads (ss page 17).
AUTO SET UP - 19 -
Advanced Hookup with Cable Box and Splitter: AV and RF Hookup
* PURCHASED SEPARATELY
TAB LE G
FUNCTION CHANNEL SELECTION VCR indicator
(Press the VCR/TV mode
select button to turn the VCR indicator on or off.)
TV VCR CABLE BOX
Select and Watch Channels
using TV
Select and Watch Channels
using VCR Record and Watch the Same Channel
Record One Channel
Watch Another
Watch Playback of a Tape AUX or VIDEO
Select Cable Box
Output Channel
AUX or VIDEO Select Cable Box
Output Channel
AUX or VIDEO Select Cable Box
Output Channel
Select Channel
to Watch
Select Cable Box
Output Channel
Select Channel
to Watch
Select Channel
to Watch
Select Channel
to Record
AUTO SET UP
Setting the channel automatically
1 Plug in at the power supply outlet after completely connecting all cables. Please refer to page 10 to 16 on "HOOKUP" sections. The VCR will be in the standby mode at this stage.
2 Press the POWER button on the VCR to start the auto set up.
SETTING THE CLOCK - 20 -
This screen appears to show that the channel is being set.
The dash " - " puts out lights one by one as shown on the VCR's display.
• The VCR will automatically store channels received in your area.
• It takes about 2 - 3 minutes.
When the auto install is complete, the channel with the lowest number appears in the VCR's display.
Notes
• If you press the POWER button inadvertently before connecting all leads, follow the steps on page 20 for further tuning function.
• If you press the POWER button during auto install mode, the VCR automatically switches to the STOP mode.
SETTING THE CLOCK
Note: An antenna or cable must be connected to the VCR before you begin this operation.
Tips
1 You'll need to set the clock when first hooking up your VCR, and any time the power goes out for more than 1
hour. When you first plug in the VCR or after a power outage, the clock display will read "--:--" on the TV display.
To set the clock
SETTING THE CLOCK - 21 -
Note: Turn on the TV and select the video channel (3 or 4). Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.
1 Press the GUIDE button.
The main on-screen menu will appear on the TV screen.
You may view all the on-screen instructions in English, French, or Spanish. When you first set up your VCR, it will be set to English. Press the cursor button to select
LANGUAGE option, and then press the cursor button for French or for Spanish.
2 Press the cursor button to select the SETUP option, and then press the ENTER button.
3 Press the
cursor button to select the CLOCK, and then press the ENTER button.
4 Press the
• The "AM" or "PM" can be select when you change the hour.
or cursor button to change the hour.
SETTING THE CLOCK - 22 -
5 Press the minutes.
6 Press the month.
cursor button to select the minutes, and then press or cursor button to change the
cursor button to select MONTH, and then press the or cursor button to change the
7 Press the day.
cursor button to select DAY, and then press the or cursor button to change the
PRE-TUNING THE VCR TUNER - 23 -
The correct day of the week will appear by itself.
8 Press the year.
9 Press the GUIDE button.
The VCR clock is now set, and should show the correct time of day on the TV screen.
cursor button to select YEAR, and then press the or cursor button to change the
Notes:
• The clock uses the 12-hour system. You set it for AM or PM.
• You can correct any item entered as you go by pressing cursor button
to select and press or cursor to change.
• If you press or cursor button continuously, the time or date is kept
changing.
PRE-TUNING THE VCR TUNER
Note: An antenna or cable must be connected to the VCR before you begin this operation.
Presetting the received channels without using a cable box (Hookups [A], [B], [C], or [D])
Press the POWER button to turn on the VCR.
1 Turn on the TV and select the video channel (3 or 4).
PRE-TUNING THE VCR TUNER - 24 -
Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.
2 Press the GUIDE button.
The main on-screen menu will appear on the TV screen.
3 Press the
4 Press the
cursor button to select the SETUP option, and press the ENTER button.
cursor button to select the CHANNEL, and then press the ENTER button.
Loading...
+ 53 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use