Hitachi HTS542525K9A300, HTE542525K9A300, HTS542516K9A300, HTE542516K9A300, HTS542512K9A300 Quick Installation Guide

Quick Installation Guide

Hitachi Travelstar 5K250 &
Travelstar E5K250

Models:

Handling precautions

HTS542525K9A300 HTE542525K9A300
HTS542516K9A300 HTE542516K9A300
HTS542512K9A300 HTE542512K9A300
HTS542580K9A300 HTE542580K9A300
HTS542525K9SA00
HTSS42516K9SA00
HTS542512K9SA00
HTS542580K9SA00



Set the drive down gently to prevent damage from impact or vibration.



Handle the drive carefully by the edges. Do not touch the exposed printed circuit board or any electronic components.



Do not press on the top or bottom of the drive.



Before handling the drive, discharge any static electricity from yourself and your clothing. With one hand touch an
unpainted metal surface, then touch the ESD bag with the other hand. Remain in contact with the chassis and the bag for a
minimum of two seconds.



Vibration, shock and static electricity to the drive will damage the precision parts. In particular, prevent vibration or shock
generated by dropping, knocking over or hitting the drive. Also, avoid touching the electrical components directly, which
can discharge electrostatic energy and damage the drive.

Page 1 version 1.0

Hitachi Global Storage Technologies

Mounting Recommendations

Page 2 version 1.0

Hitachi Global Storage Technologies

The drive will operate in all axes (six directions) and will stay within the specified error rates when tilted ±5
degrees from these positions. Performance and error rate will stay within specification limits if the drive is

operated in the other permissible orientations from which it was formatted. Thus a drive formatted in a horizontal
orientation will be able to run vertically and vice versa.

The recommended mounting screw torque is 0.3±0.05 Nm.
The recommended mounting screw depth is 3.0±0.3 mm for bottom and 3.5±0.5 mm for horizontal
mounting.
The user is responsible for using the appropriate screws or equivalent mounting hardware to mount
the drive securely enough to prevent excessive motion or vibration of the drive at seek operation or
spindle rotation.

Page 3 version 1.0

Hitachi Global Storage Technologies

Interface connector

Mounting Solution Company: E-A-R

Page 4 version 1.0

Hitachi Global Storage Technologies

© Copyright Hitachi Global Storage Technologies
Hitachi Global Storage Technologies

Produced in the United States
6/07
All rights reserved

Hitachi Global Storage Technologies.
Microsoft, Windows XP, and Windows are

trademarks of Microsoft Corporation in the United
States, other countries, or both.

Other product names are trademarks or regist ered
trademarks of their respective companies.

References in this publication to Hitachi Global
Storage Technologies products, programs or services
do not imply that Hitachi Global Storage
Technologies intends to make these available in all
countries in which Hitachi Global Storage
Technologies operates.

Product information is provided for information
purposes only and does not constitute a warranty.

Information is true as of the date of publication and is
subject to change. Actual results may vary.

This publication is for general guidance only.
Photographs may show design models.

05 June 2007

TravelstarTM is a trademark of

Page 5 version 1.0