Page 1
Instruction
Manual
Hitachi Air Purifi er
Model
EP-PZ30J
Contents
Before Use
Features / Name of Each Component / Operation
Buttons and Indicators / Accessories
Safety Precautions · · · · · · · · · · · · · · · · · · ·
Cautions on Use · · · · · · · · · · · · · · · · · · · · ·
Preparations for Operation · · · · · · · · · · · · ·
·
Setting Filter in Purifi er · · · · · · · · · · · · · · · · · ·
· Inserting Batteries into Remote Controller · · · · · ·
Installation · · · · · · · · · · · · · · · · · · · · · · · · · ·
· · · · · · · ·
E-2
E-4
E-6
E-7
E-7
E-7
E-7
Thank you for purchasing a Hitachi air
purifi er.
This air purifi er is for home use only. Do
not use it for any other purpose than air
purifying.
Please read this instruction manual
carefully before use to ensure proper
operation of the unit.
Keep this manual for future reference in
an easily accessible place.
Read the “Safety Precautions” P.E-4-E-5
to ensure proper use
.
Operating Air Purifi er
Using Remote Controller · · · · · · · · · · · · · · ·
· Starting Operation · · · · · · · · · · · · · · · · · · · · ·
· Selecting Auto Mode · · · · · · · · · · · · · · · · · · ·
·
Switching Airfl ow Rate · · · · · · · · · · · · · · · · · ·
Max Operation · · · · · · · · · · · · · · · · · · · · · · ·
·
· Using Timer · · · · · · · · · · · · · · · · · · · · · · · · ·
Using the Control on Purifi er · · · · · · · · · · · ·
Memory Function / Sensors / Auto Detection · · ·
·
Memory Function · Odor Sensor ·
Auto Detection · · ·
Cleaning and Maintenance
Cleaning · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Purifi er Body · Pre-fi lter · · · · · · · · · · · · · · · · ·
·
Filter Replacement · · · · · · · · · · · · · · · · · · ·
· Replacement Interval
· Replacing the Filter· · · · · · · · · · · · · · · · · · · · ·
Troubleshooting Guide · · · · · · · · · · · · · · · ·
Replacement Parts · · · · · · · · · · · · · · · · · · ·
Specifi cations · · · · · · · · · · · · · · · · · · · · · · ·
·
Precautions on Filter Handling· · · ·
E-8
E-8
E-9
E-9
E-10
E-10
E-11
E-11
E-11
E-12
E-12
E-13
E-13
E-13
E-14
E-14
E-15
EP-PZ30J_EN.indd 1EP-PZ30J_EN.indd 1 2018-08-24 16:57:352018-08-24 16:57:35
Page 2
Features / Name of Each Component /
Accessories
Filter assembly
Pre-filter
Removes large size dust.
Indicator section
P.E-3
Panel
(Allergen-free, catechin deodorizing filter)
White surface: Dust filter
Black surface: Deodorizing filter
Air inlet
Purifier
Remote controller pocket
Hand grip
Air outlet
Power plug
Power cord
E-2
EP-PZ30J_EN.indd 2EP-PZ30J_EN.indd 2 2018-08-24 16:57:492018-08-24 16:57:49
Page 3
Operation Buttons and Indicators /
P.E-OO shows a page with further description.
Operation Buttons and Indicators
Features / Name of Each Component / Operation Buttons and Indicators / Accessories
Auto Mode
The indicator is lit green when
the Auto Mode is running.
Timer
The indicator is lit green
when the 2-hour timer is set.
P.E-9
P.E-10
Airflow Level
Indicates airflow rate during operation.
Silent
(Green)
Med
(Green)
P.E-9
Max
(Green)
Infrared Remote Receiver
Direct the remote controller at this
location before pressing buttons.
Remote Controller
On/Off Button
Use this button to start and stop
operation, and to switch the
operation mode and airfl ow rate.
Odor Sensor
Detects air contamination
such as cigarette smell.
P.E-11
P.E-11
Point the remote controller at the infrared receiver on the purifi er when you operate.
The remote controllable distance is approx. 6m maximum when pointing the remote controller squarely to the receiver.
On/Off Button
Press this button to start or
stop operation.
Mode Button P.E-9
Press this button to switch the
mode in automatic operations.
P.E-8
Airflow Button
Press this button to switch
airflow rate.
Timer Button
Press this button to set Offtimer.
P.E-9
P.E-10
Max Button P.E-10
Press this button to start max
operation.
Note
The remote control may not work in a room where inverter lighting apparatus or electronic quick start
lighting apparatus is used, or when the infrared receiver is exposed to direct sunlight.
If you operate the remote controller not pointing straight to the front face of the purifi er, the sensitivity
will be reduced. Operate the controller from the place in front of the purifi er whenever possible.
Provided Accessories
Filter
Housed inside the purifi er.
Be sure to remove this
fi lter from plastic bag
before operating the
purifi er.
EP-PZ30J_EN.indd 3EP-PZ30J_EN.indd 3 2018-08-24 16:57:492018-08-24 16:57:49
(x1) (x1) (x2)
Remote controller “AAA” R03
batteries for remote controller
E-3
Page 4
Safety Precautions
Please read the following safety precautions carefully before using the air purifi er.
To prevent injury to the user or other people and property damage, the following instructions must
be followed. Also read the precautions appearing in the text carefully to ensure proper use.
Definition of each indication
Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is
classifi ed by the following indications.
This symbol indicates the
WARNING
CAUTION
possibility of death or serious
injury.
This symbol indicates the
possibility of injury or damage
to property.
Meanings of Symbols
Indicates “warning or caution”.
Indicates “prohibition”.
Indicates a “must”.
WARNING
To Prevent Fire, Electric Shock and Injury
AC Outlet, Power Plug and Power Cord
Before cleaning and other maintenance, be sure to
unplug the power cord from the AC outlet. Never pull it
out or insert it with wet hands.
Securely insert the power plug into AC outlet.
Remove dust of the power plug
periodically using a dry cloth.
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent or
similarly qualifi ed persons in order
to avoid a hazard.
Clean
Panel
Purifier
Power cord
Power plug
Do not use with a voltage other than
220-240V AC.
Do not damage the power cord.
(Do not break, modify, forcibly bend,
pull or twist it. Also do not place any
heavy object on it or pinch it.)
Do not use damaged power cord or
power plug, or loose socket.
220-240V
Miscellaneous
Never attempt to disassemble, modify or repair by yourself.
Do not put your fi ngers or wires into air outlet and inlet.
E-4
EP-PZ30J_EN.indd 4EP-PZ30J_EN.indd 4 2018-08-24 16:57:502018-08-24 16:57:50
Page 5
CAUTION
To Prevent Fire, Short-Circuit, Electric Shock, Injury and Failure
AC Outlet, Power Plug and Power Cord
Be sure to hold the plug, not the power cord, when unplugging it from AC outlet.
Unplug the power plug from the wall outlet when you do not use the air
purifi er for a long time.
Place of Use
Do not use in a humid place such as in bathroom.
Do not place air purifi er near a hot object such as a heater.
Do not use in a place where soot of oil, such as machine oil, is
fl oating in the air.
Do not use air purifi er in a kitchen as a substitute of ventilating fan.
Do not use in a place where any organic solvent or chemicals are used.
Do not use the air purifi er in a place where a machine tool
such as a grinder and welder that produces sparks such as
fl ammable dust is installed.
Purifier Body and Panel
Safety Precautions
Do not use benzene or thinner when wiping or spray
fl ammable gas such as insecticides.
Do not let air purifi er intake infl ammables, lit cigarettes or incense.
Do not put your fi nger or any other object into air outlet and
inlet on the panel.
Miscellaneous
Firmly hold the grip when carrying the air purifi er.
Ventilate a room frequently if any heating appliance is simultaneously used with air purifi er.
Otherwise, it may cause carbon monoxide poisoning.
Use dry cell batteries properly after reading the precautions on them.
Use a genuine fi lter for the Hitachi Air Purifi er.
Other fi lters may cause unit failure.
The appliance is not to be used by children or persons with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction.
Children should be supervised to ensure that they do not play with the appliance.
Do not operate the unit when using fumigating (smoking) type insecticide.
Using such insecticide will cause chemicals to accumulate in the unit and to be emitted by subsequent operation,
which can be harmful to heath. After using insecticide, ventilate the room well before running the purifi er.
To Prevent Floor Scratches or Wall Stains
During Cleaning / Place of Use
During cleaning, lay a soft cloth on
the fl oor and place the purifi er and
detached components (panel and
the like) on it.
Otherwise, it may cause scratches on the fl oor.
EP-PZ30J_EN.indd 5EP-PZ30J_EN.indd 5 2018-08-24 16:57:502018-08-24 16:57:50
Do not use the air purifi er near the
wall that cannot be scrubbed such
as cloth-covered white wall.
The air purifi er will take in the surrounding
air and may produce local stains.
E-5
Page 6
Cautions on Use
Do not install the air purifier in an
unstable place, near any obstacles or
on a floor.
Such installation may cause the air purifier to topple
over or fall.
Do not run with filter detached.
No cleaning effect is obtainable without filter.
Running without filter may also cause unit failure.
Do not block the air inlet or air outlet.
Blocking them may cause unit failure.
Do not place the purifier in a place
exposed to direct sunlight.
Direct sunlight may cause deformation, discoloration or
malfunction.
Do not block or touch the infrared
receiver, odor sensor.
Infrared receiver may be stained or damaged to
reduce its sensitivity.
Ventilate closed room occasionally.
The air purifier does not have a ventilation effect.
The air purifier cannot remove hazardous
substance in cigarettes (carbon monoxide, etc.).
Do not subject remote controller to impact.
Do not drop the remote controller or step on it,
and do not place any object on it. Doing so may
cause unit failure.
Do not use near television or radio.
Broadcast may be interfered.
Install the air purifier 2m or more away from such
devices.
E-6
EP-PZ30J_EN.indd 6EP-PZ30J_EN.indd 6 2018-08-24 16:57:512018-08-24 16:57:51
Page 7
Preparations for Operation
Note
Lay a soft cloth or the like beneath the purifi er to protect the fl oor against scratch.
No cleaning effect is obtainable if the fi lter is installed with plastic bag. It may also be a cause of malfunction.
Setting Filter in Purifier
Remove the panel.
Lay the air purifier unit with the
front upward on a stable and
horizontal surface.
Put your fingers under the panel
(two locations), lift the panel
slowly and slide it slightly to the
top side to remove.
Hold the prefilter by the
lugs to remove.
Note
Reinstall the panel on the unit.
Insert the four tabs of the prefilter securely into
the holes on the unit.
Install the filter so that the marking “ 手前側 ” on the
filter side face will face the panel.
Do not open the panel forcibly. Parts may break.
(Perform the same procedure when replacing filter.)
Install the filter.
Face the white
surface of the
filter to your side.
Indication
Lugs
Take the filter out
of the plastic bag
and install it in the
unit.
Install the filter so that
the arrow “ ↓ FRONT”
on the filter side face
faces the panel.
Tabs (4 locations)
Holes
Preparations for Operation InstallationCautions on Use
Insert the two tabs on the inside of the panel
upper side securely into the two cylindrical
notches on the top of the unit.
Insert one tab into a cylindrical notch and then do
the other tab in the same manner.
Gently push bottom of the panel until it clicks to
close it securely.
Tabs
Cylindrical notches
Inserting Batteries into Remote Controller
Remove the battery
compartment cover.
Cover
Insert the provided two “AAA” R03 batteries
Since the batteries are provided when shipped
Batteries are consumable
When replacing batteries, replace the two batteries simultaneously.
Insert batteries and close the cover.
with the correct polarities as instructed.
from the factory, their lives may be shorter than
brand-new ones because of self-discharge.
Only use two manganese batteries or two alkali batteries. Do not mix them.
−
＋
＋
−
Installation
Avoid any place close to heating appliance, and select a well-ventilated place.
Note
EP-PZ30J_EN.indd 7EP-PZ30J_EN.indd 7 2018-08-24 16:57:512018-08-24 16:57:51
Do not place the purifi er on unstable pedestals or the like.
Falling or dropping of the purifi er may cause damage
or failure.
E-7
Page 8
Using Remote Controller
Here we describe how to operate the air purifier using the remote controller. For the operation using the
control on the purifier, please refer to
Starting Operation
Remote Controller Air Purifier Indicator Section
P.E-11
.
Securely insert the power plug into
AC outlet.
Press
button.
Operation starts and the indicators are lit.
Pressing
button during
operation will stop the operation.
In the first 3 minutes after the power cord is plugged
in, the unit checks the room air condition and saves it
in memory. During the checking period, the “Air Purify”
indicator blinks green. After 3 minutes pass, the blinking
stops and the indicator goes out.
You may start the operation within 3 minutes of plugging
in the unit. In this case too, the “Air Purify” indicator
continuously blinks and, after 3 minutes have passed,
the indicator stops blinking and lights up solidly.
Blinks
The “Auto Mode” and “Airflow Level” indicators
light up. (The “Air Purify” indicator in the Auto
Mode blinks for 3 minutes and then lights up
solidly.)
Lit Lit
The factory setting is “Air Purify” in the Auto Mode.
From the second time onward, the memory function enables the operation with memorized conditions.
P.E-11
Stand-by Power Consumption
So long as the power plug is left inserted in AC outlet, approx. 0.7W power will be consumed even if the unit
is not used. (Unplug the power cord when the unit is left unused for an extended period of time.)
E-8
EP-PZ30J_EN.indd 8EP-PZ30J_EN.indd 8 2018-08-24 16:57:512018-08-24 16:57:51
Page 9
Selecting Auto Mode (Basics)
3 Auto modes are available for your choice.
The fan will not stop during operation in the Auto Mode.
Auto Modes and Tips for Selection
Mode Tips for Selection
Air Purify
Odor
Pollen
This is a normal operation mode.
The odor sensor detects the degree of air contamination, and airflow rate is switched automatically.
This mode is recommended when you have concerns about room odor.
The odor sensor detects the degree of air contamination and switches to “MAX” operation quicker than when
the unit operates in the “Air Purify” mode.
This mode is recommended when you have concerns about pollen contamination.
The operation with Medium airflow is continued for 20 minutes. Then, the odor sensor detects the degree of air
contamination and automatic operation (at “Silent” or “Med” airflow rate) is continued for another 20 minutes.
After that, these operations are repeated.
The selected mode indicator lights up (green).
Press
button.
Lit
Operation mode switches
every time you press this
Operation mode switches every time you
press Mode button.
Air Purify Odor Pollen
button.
Using Remote Controller
The airflow indicators automatically switch and light while the unit runs in the Auto Mode, but when
Note
the air in the room is clean, the last lit airflow indicator goes out. In this case, the fan is still rotating to
detect the degree of air contamination.
Switching Airflow Rate
You can select a desired airflow rate from the three different levels.
Press
Airflow rate switches every
time you press this button.
button.
The indicator of the set airflow rate lights up.
Lit
Airflow rate changes in the following sequence.
(Silent) (Medium) (Max)
Green Green Green
E-9
EP-PZ30J_EN.indd 9EP-PZ30J_EN.indd 9 2018-08-24 16:57:522018-08-24 16:57:52
Page 10
Using Remote Controller
(Continued)
Max Operation
This operation is useful when many people smoke or when you want quick cleaning of room air.
The airflow indicator blinks for 5 minutes.
Press
button.
The operation with Max airflow will
continue for about 5 minutes.
After Max operation, the status
before Max operation is resumed.
Press button or button during
operation.
Using Timer
Press
button.
Blinking green
How to cancel
The timer indicator is lit on.
Lit green
Off-timer (2 hours) is set.
Operation will stop approx.
2 hours after timer setting.
How to set/cancel
Every time you press
and “Cancel” will alternate.
button, “Set”
E-10
EP-PZ30J_EN.indd 10EP-PZ30J_EN.indd 10 2018-08-24 16:57:522018-08-24 16:57:52
Page 11
Using the Control on Purifier
Press
button.
Operation starts.
Every time you press the
unit, the lit indicator switches in the order shown
below until stopping the unit.
Air
Purify
Odor
Pollen
button to stop the
Off
Memory Function / Sensors / Auto Detection
Memory Function (Only with the remote controller)
When you stop the operation and then restart, the purifier will resume the operation status before shutdown.
If you operate the purifier for approx. 5 seconds or longer, the operation status will be stored in memory. (If you stop the
operation within less than 5 seconds, the operation status will not be stored in memory.)
The timer setting is not saved in memory.
The saved memory is cleared and the factory settings are restored by unplugging the power plug.
Odor Sensor
The sensor detects odor in air such as cigarette smoke or odor of pet animals. Even when you
feel the air is clean, the purifier may continue the operation if the odor sensor finds any gas
component not removed by the filter.
Any of the following may also be detected by the odor sensor.
Combustible gas when a combustion appliance is running, alcohol, odor of cosmetics, sprays,
vapors, abrupt temperature changes, etc.
P.E-14
Auto Detection
The air purifier unit detects the degree of air contamination in the room with the odor sensor and then starts
automatic operation.
In the first 3 minutes after the power cord is plugged in, the unit will check room air condition and save it in memory.
During the time, the "Air Purify" indicator will blink. After 3 minutes, the "Air Purify" indicator will go off and the purifier
is now ready to operate.
You may start the operation in less than 3 minutes after plugging the power cord.
In this case too, the “Air Purify” indicator will continue to blink, meaning the unit is checking the room air condition.
After 3 minutes, the indicator will light solidly if the unit is running air purification operations in the Auto Mode.
If you plug in the power cord under contaminated air condition, the sensor sensitivity may be reduced.
Using Remote Controller Using the Control on Purifier Memory Function / Sensors / Auto Detection
E-11
EP-PZ30J_EN.indd 11EP-PZ30J_EN.indd 11 2018-08-24 16:57:522018-08-24 16:57:52
Page 12
Cleaning
(Guide for cleaning: Once a month)
Note
Note
Do not splash water on the purifier body. Water splash can be a cause of failure.
Do not use a volatile solvent, such as gasoline, thinner, benzene, wax, kerosene, alcohol, etc. or
polishing powder, or alkaline cleaner.
Such chemicals could cause deformation, discoloration, damage or removal of prints.
When using a chemically treated cloth, follow its instructions.
Never use dryer or heater to dry the purifier case. Heating could cause deformation.
Lay a soft cloth or the like beneath the purifier to protect the floor against scratch.
Purifier Body
Remove dirt on the unit or panel with a soft cloth moistened with water or neutral detergent,
and wrung. After removing dirt, wipe the unit or panel carefully so that there is no detergent
on it.
Pre-filter
To clean the pre-filter, follow the steps below.
Remove the panel.
Lay the air purifier unit with the
front upward on a stable and
horizontal surface.
Put your fingers under the
panel (two locations), lift
the panel slowly and slide
it slightly to the top side to
remove.
Remove the pre-filter.
● Hold the lugs to remove the prefilter.
Holes
Lugs
Holes
Note
Do not open the panel forcibly. Parts may break.
Clean the pre-filter.
Use a vacuum cleaner or the like to remove dust. If the dust cannot be removed, wash
it off with water. After washing, fully drain the prefilter and then dry it in well-ventilated
place where not exposed to sunlight.
When you wash the prefilter, use a soft brush such as an old toothbrush.
If you want to remove dust from the filter, use a vacuum cleaner or the like.
Reattach the pre-filter.
Insert the prefilter securely into the holes on the unit in the reverse order of step and
lock it in place.
Install the filter so that the marking “ 手前側 ”on the filter side face will face the panel.
Reattach the panel.
Insert the two tabs on the inside of the panel
upper side securely into the two cylindrical
notches on the top of the unit.
Insert one tab into a cylindrical notch and then
do the other tab in the same manner.
Gently push bottom of the panel until it clicks to close it
securely.
Tabs
Cylindrical
notches
The pre-filter is a consumable part.
E-12
EP-PZ30J_EN.indd 12EP-PZ30J_EN.indd 12 2018-08-24 16:57:532018-08-24 16:57:53
When damaged pre-filter needs to be replaced, purchase the replacement part (Part No. EP-BX40-002).
Page 13
Filter Replacement
Replacement Interval
The filter is a consumable part.
For the filter replacement interval, use approx. 2 years as a guide when the air purifier processes
the smoke generated by 5 cigarettes smoking a day.
The dust filter should be replaced early if its color shows the resemblance to the color on the
dirtiness label attached to the purifier body.
The colors on the dirtiness label are shown as a guide only. Depending on the place of installation, actual
color of contaminated filter may differ from the color shown on this label.
For a room with
not much cigarette
smoking
For a room with
much cigarette
smoking
The filter may need to be replaced earlier depending on the place of installation and conditions of use.
When dirt or odor becomes harder to remove, replace the filter earlier than suggested. Otherwise, the
filter may generate odor.
The filter should be replaced earlier in the following cases.
When purifier intakes oily smoke, carbon substance (soot), etc. or when the smell of new building materials
remains after a new house is built or the house is remodeled.
When used in stores, such as in coffee shops, game parlors, barber shops, beauty parlors, or in offices or hotels.
When purifier intakes large amounts of cigarette smoke.
When purifier intakes combustion gas generated by heating appliances.
When purifier intakes solvent content of paint, adhesive, etc.
When used in dusty place near a road where the traffic is heavy.
Dirtiness label
Filter Replacement Guide
Replace the filter
early if its color
becomes similar to
either color.
Precautions on Filter Handling
Be sure to take the filter out of a plastic bag before use.
Do not set the filter when it is still in a plastic bag. Otherwise, malfunction may result.
Avoid rough handling.
Do not squeeze, knead, roll up or pull the filter.
Once the filter is broken, the cleaning effect will be lost.
Do not wash the filter.
The filter is not washable for reuse. Purchase a new filter for replacement.
Replacing the Filter
Use the filter No. EP-PZ30J-902 separately available.
Before replacing the filter, be sure to stop the purifier and unplug the power cord from AC outlet.
The filter contains synthetic resins inside. When you dispose of the filter, follow relevant local regulations
on disposal.
Take the filter out.
Remove the panel and take the filter
P.E-
out.
7
Install the filter.
Take a new filter from the plastic bag
and install it.
For installation procedures, refer to
“Preparations for Operation”.
P.E-
Cleaning
Cleaning
Filter Replacement
Filter Replacement
7
Note
Do not open the panel forcibly. Parts may break.
E-13
EP-PZ30J_EN.indd 13EP-PZ30J_EN.indd 13 2018-08-24 16:57:532018-08-24 16:57:53
Page 14
Troubleshooting Guide
Before asking for repair
Symptom Solution
No air blows out
or power does not
turn on
Is power plug securely inserted into
AC outlet?
Is breaker switched off?
Smoke or smell
is not efficiently
Is the filter dirty?
removed, or there
is an odor
Are polarities of batteries correct?
No remote
operation
The airflow rate
will not decrease
though the Auto
Mode is selected
and air in the room
Are batteries dead?
Is the infrared remote receiver
dirty?
Is there anything nearby that the
odor sensor might sense?
For example,
is clean.
Is the odor sensor blocked by any
The airflow rate will not
increase though the Auto
Mode is selected and air in
the room is contaminated.
obstacle?
Was the ambient air clean when
the purifier power cord was
plugged into AC outlet?
Check to see
Any appliance generating
combustion gas
Alcohol, cosmetics, sprays, etc.
check the following once again
Securely insert the power plug into AC
outlet.
Switch on breaker.
Replace the filter, referring to the “Filter
Replacement”. The filter may need to be
replaced sooner depending on the place
of installation and
conditions of use.
Insert the batteries with correct
polarities.
Replace the batteries.
Clean the infrared remote receiver.
Purifier may sense invisible gas
component that cannot be cleaned by
filter and continue operation. Ventilate the
room by opening window, etc.
Refer to “Odor Sensor” and check if
there is anything is detected by the
sensor.
Remove the obstacle.
Change the airflow rate. Or open a
window and plug the power cord into
AC outlet when ambient
air is clean.
P.E-
P.E-
P.E-
P.E-
P.E-
13
7
7
11
9
Following Conditions Are Normal
Symptom Cause
The fan is rotating though the Auto Mode is
selected and the airflow indicator is out.
Snapping noise when plugging power cord into
AC outlet
Purifier body vibration during the “Max” operation
The unit is running in the Auto Mode
and operation is on standby.
This is normal.
Electric current flows to electric
components such as the odor sensor
at the same time power is turned ON.
This is normal.
Vibration is caused by fan rotation. This
is normal.
Replacement Parts (Separately Available)
Filter
Designate the replacement part
No. EP-PZ30J-902 when ordering.
Pre-filter
Designate the replacement part
No. EP-BX40-002 when ordering.
E-14
EP-PZ30J_EN.indd 14EP-PZ30J_EN.indd 14 2018-08-24 16:57:532018-08-24 16:57:53
Page 15
Specifications
Model EP-PZ30J
Power supply AC220 50/60Hz AC240 50/60Hz
Airfl ow switching Max Medium Silent Max Medium Silent
Power consumption (W) 37/43 21/20 18/16 37/43 25/24 22/20
3
Airfl ow rate (m
Applicable fl oor space 22/25m
External dimensions 424(H) x 400(W) x 133(D) mm
Weight 4.0 kg
Length of power cord Approx. 1.8m
/min) 2.8/3.2 1.4/1.1 0.9/0.6 2.8/3.2 1.7/1.4 1.2/0.8
2
Troubleshooting Guide Replacement Parts
Specifications
E-15
EP-PZ30J_EN.indd 15EP-PZ30J_EN.indd 15 2018-08-24 16:57:532018-08-24 16:57:53
Page 16
EP-PZ30J_EN.indd 16EP-PZ30J_EN.indd 16 2018-08-24 16:57:532018-08-24 16:57:53
Loading...