To obtain the best performance and ensure years of
trouble-free use, please read this instruction
manual completely.
Mode d’emploi
Des performances optimales et un fonctionnement
à long terme seront assurés en appliquant les
présentes instructions après avoir entièrement lu
ce mode d’emploi.
DZ-GX20E (UK)/DZ-MV780E (UK)
DZ-MV750E (UK)/DZ-MV730E (UK)
DISC
NAVIGATION
SELECT
STOP/EXIT
MENU
DISC
NAVIGATION
SELECT
STOP/EXIT
MENU
Bedienungsanleitung
Bitte lesen Sie diese Bedienungsanleitung
aufmerksam durch, um durch richtige Bedienung
jahrelangen und störungsfreien Betrieb zu
gewährleisten.
DVDCAM PC Software Support Centre
URL http://dvdcam-pc.support.hitachi.ca/
English
Important Information
For Your Safety
The power switch turns the DVD video camera/recorder on and off, leaving the date/time feature unaffected. If the
camera/recorder is to be left unattended for a long period of time, turn it off.
WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
WARNING : TO PREVENT FIRE OR SHOCK HAZARD, USE THE
RECOMMENDED ACCESSORIES ONLY.
The DVD video camera/recorder and AC
adapter/charger have the following caution
marks.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT OPEN.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Precautions
WARNING: Many television programmes and
films are copyrighted. In certain circumstances,
copy-right law may apply to private in-home
videotaping of copyrighted materials.
The liquid crystal display (LCD) panel is
made by highly precise technology. More than
99.99% of its picture elements (pixels) are
effective, but some (less than 0.01%) may
appear as coloured bright dots. This does not
indicate a fault as the LCD panel stretches the
limits of current technology.
Identifications of caution marks
This symbol warns the user that
uninsulated voltage within the unit
may have sufficient magnitude to cause
electric shock. Therefore, it is dangerous
to make any kind of contact with any
inside part of this unit.
This symbol alerts the user that
important literature concerning the
operation and maintenance of this unit
has been included. Therefore, it should
be read carefully to avoid any
problems.
WARNING: To prevent risk of injury or damage
to your DVD video camera/recorder and the AC
adapter/charger, use only the DZ-BP14S/DZBP7S/DZ-BP14SW/DZ-BP7SW battery and DZACS2 (E) AC adapter/charger.
CLASS 1
LASER PRODUCT
CAUTION
This product contains a laser diode of higher
class than 1. To ensure continued safety, do
not remove any covers or attempt to gain
access to the inside of the product. Refer all
servicing to qualified personnel.
2
Important for United Kingdom
(for DZ-GX20E (UK)/DZ-MV780E (UK)/DZ-MV750E (UK)/DZ-MV730E (UK))
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse, the value
of which is indicated on the pin face of the plug.
Should the fuse need to be replaced, an ASTA or BSI approved BS 1362 fuse must be used of the
same rating. If the fuse cover is detachable never use the plug with the cover omitted. If a
replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of
the plug. Fuse covers are available from your dealer.
DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power
points in your home or the cable is too short to reach a power point, then obtain an appropriate
safety approved extension lead or consult your dealer.
If there is no alternative to cutting off the mains plug, ensure that you dispose of it immediately,
having first removed the fuse, to avoid a possible shock hazard by inadvertent connection to the
mains supply.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
Blue= Neutral, Brown= Live
As these colours may not correspond with the coloured markings identifying the terminals in your
plug, proceed as follows:
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured
BLUE or BLACK.
The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured
BROWN or RED. On no account connect either of these wires to the terminal marked E or by the
earth symbol or coloured green or green and yellow.
English
3
English
IMPORTANT SAFETY INSTRUCTIONS
In addition to the careful attention devoted to quality standards in the manufacture of your video product, safety is a
major factor in the design of every instrument. But, safety is your responsibility too.
This page lists important information that will help to assure your enjoyment and proper use of DVD video camera/
recorder and accessory equipment.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9 Protect the mains lead from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
10 Only use attachments/accessories specified by the
manufacturer.
11 Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is
used, use caution when moving
the cart/apparatus combination to
avoid injury from tip-over.
12 Unplug this apparatus during lightning storms or
when unused for long periods of time.
13 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as mains lead or plug is
damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
14 The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
4
Cautions When Using
Handle the liquid crystal display (LCD) with care:
• The LCD is a very delicate display device: Do not press its surface with force, hit it or prick it with
a sharp object.
• If you push the LCD surface, unevenness in display may occur. If unevenness does not disappear
soon, turn the DVD video camera/recorder off, wait for a few moments, and then turn it on again.
• Do not place the DVD video camera/recorder with the open LCD screen down.
• Close the LCD monitor when not using the DVD video camera/recorder.
Liquid crystal display (LCD) and viewfinder:
• The LCD screen and viewfinder are the products of highly precise technology. Among the total
number of pixels (approx. 120,000 pixels for LCD monitor and equivalent to approx. 200,000 pixels
for viewfinder), 0.01% or less pixels may be missing (black dots) or may remain lit as coloured dots
(red, blue, green). This shows the limitations of the current technology, and does not indicate a
fault that will interfere with recording.
• The LCD screen and viewfinder will be slightly dimmer than usual when the DVD video camera/
recorder is at low temperature, as in cold areas, or immediately after power is turned on. Normal
brightness will be restored when the temperature inside the DVD video camera/recorder rises.
Hold the DVD video camera/recorder correctly:
• Do not hold the viewfinder or LCD monitor when lifting the DVD video camera/recorder: The
viewfinder or LCD monitor could detach and the DVD video camera/recorder may fall.
Do not subject the DVD video camera/recorder to impact:
• This DVD video camera/recorder is a precision machine. Take great care that you do not strike it
against a hard object or let it fall.
• When using a tripod, firmly secure the DVD video camera/recorder on it. Do not use the DVD
video camera/recorder with a tripod in a place where it is subject to severe vibrations or impact.
No sand or dust!
• Fine sand or dust entering the DVD video camera/recorder or AC adapter/charger could cause
malfunctions or defects.
No water or oil!
• Water or oil entering the DVD video camera/recorder or AC adapter/charger could cause electric
shock, malfunctions or defects.
English
5
Heat on surface of product:
English
• The surfaces of the DVD video camera/recorder, AC adapter/charger and battery will be slightly
warm, but this does not indicate a fault.
Screen on connected TV:
• Never leave the disc navigation screen, still image or camera image displayed on your TV to which
the DVD video camera/recorder is connected: Doing so could result in displayed image retention
or phosphor degradation of TV screen.
Be careful of ambient temperature:
• Using the DVD video camera/recorder in a place where the temperature is over 40ºC or under 0ºC
will result in abnormal recording/playback.
• Take care that the temperature of this DVD video camera/recorder, when connected to PC does
not rise excessively (reference for usage: approx. 30 minutes at about 30ºC).
• Do not leave the DVD video camera/recorder on beach sand or in a closed vehicle where the
temperature is very high for a long time: This could cause malfunctions.
Do not point directly at the sun:
• If direct sunlight strikes the lens or viewfinder, the DVD video camera/recorder could malfunction
or a fire could occur.
• Do not leave the DVD video camera/recorder with the LCD screen exposed to direct sunlight: This
could cause malfunctions.
Do not use the DVD video camera/recorder near TV or radio:
• This could cause noise to appear on the TV screen or in radio broadcasts.
Do not use the DVD video camera/recorder near strong radio waves or magnetism:
• If the DVD video camera/recorder is used near strong radio waves or magnetism, such as near a
radio wave tower or electric appliances, noise could enter video and audio that are being recorded.
During playback of normally recorded video and audio, noise may also be present in picture and
sound.
At worst the DVD video camera/recorder could malfunction.
Do not expose the DVD video camera/recorder to soot or steam:
• Thick soot or steam could damage the DVD video camera/recorder case or cause malfunctions.
Do not use the DVD video camera/recorder near corrosive gas:
• If the DVD video camera/recorder is used in a place where there is dense exhaust gas generated
by petrol or diesel engine, corrosive gas such as hydrogen sulfide, or sulfur such as in a hot spring
area, the external or internal terminals could corrode, which would disable normal operation, or
the battery connecting terminals could corrode, so power will not turn on.
Do not use the DVD video camera/recorder near ultrasonic humidifier:
• With some water in humidifier, calcium and other chemicals dissolved in water could scatter in the
air, and white particles could adhere to the optical head of the DVD video camera/recorder, which
could cause it to operate abnormally.
Do not expose the DVD video camera/recorder to insecticide:
• Insecticide entering the DVD video camera/recorder could dirty the lens in laser pickup block,
and in such a case the DVD video camera/recorder might not operate normally. Turn the DVD
video camera/recorder off and cover it with vinyl sheet, etc. before using insecticide.
Do not use a generally available 8 cm CD lens cleaner:
• Cleaning the lens is not necessary when using this DVD video camera/recorder in the usual way.
• Using 8 cm CD lens cleaner could cause this DVD video camera/recorder to be faulty.
• If you have to clean the lens, use a Hitachi Maxell cleaner that is exclusively for 8 cm DVD discs.
6
Be careful of moisture condensation:
• When you move the DVD video camera/recorder between places where the difference in
temperatures is great – such as entering a lodge from a ski slope or going out of a cooled room or
vehicle – condensation (vapour in air warmed or cooled to water droplets) could occur on the lens
and/or inside the DVD video camera/recorder. If condensation occurs, do not open the cover of
disc or card insertion block if possible. If condensation occurs on the lens, wipe it off with a soft,
dry cloth. Even if the external surface of DVD video camera/recorder has dried, condensation may
remain inside: Turn the DVD video camera/recorder off and leave it in a dry place for at least 1 – 2
hours before using it again.
Do not use the DVD video camera/recorder for a long uninterrupted period of time:
• This DVD video camera/recorder cannot be used for a long time continuously as a surveillance
camera/monitor. If you use it for a long continuous period of time, the temperature of DVD video
camera/recorder could exceed the limit and the recording/playback operation may slow down or
other faults could occur. If this happens, turn it off and wait for a while before using it again.
Do not turn the DVD video camera/recorder off while the ACCESS/PC indicator or
CARD ACCESS indicator is lit or blinking:
• The ACCESS/PC or CARD ACCESS indicator is lit or
blinking to show that data is being written to disc or card,
or being read from it. At this time, do not do any of the
following, so as not to damage the data:
− Remove battery
− Disconnect AC adapter/charger
− Plug or unplug PC connection cable
− Remove disc or card
− Subject DVD video camera/recorder to severe
vibrations or impact.
− Violently open or close the LCD monitor
If you turn the DVD video camera/recorder off while the
ACCESS/PC or CARD ACCESS indicator is lit or blinking,
turn it on again with the disc or card loaded in it: Repair of
the disc or card will be executed automatically (see
page 157).
CARD ACCESS indicator
ACCESS/PC
indicator
English
7
Do not wipe the DVD video camera/recorder case with benzene or thinner:
English
• The coating of case could peel off or the case surface could deteriorate.
• When using a chemical cleaning cloth, follow the instructions.
Also read the instructions attached with optional accessories:
• For optional accessories, observe the cautions and follow instruction manuals attached.
The battery provided has not been charged at time of purchase:
• Charge it before using the DVD video camera/recorder (see page 42).
• The battery will discharge as time passes. (The battery is produced so that it discharges on its own
in order to protect its characteristics.)
Disc cannot be inserted or removed unless a charged battery or AC adapter/
charger is connected to the DVD video camera/recorder.
Be sure to set the power switch to “OFF” when turning the DVD video camera/
recorder off:
• Disconnecting the battery or AC adapter/charger while the DVD video camera/recorder is being
powered could cause a fault.
8
Cautions When Storing
Do not leave the DVD video camera/recorder in a place where the temperature is
very high for a long period of time:
• The temperature inside a closed vehicle or trunk can become very high in a hot season. If you leave
the DVD video camera/recorder in such a place, it could malfunction or the case could be
damaged. Also, do not expose the DVD video camera/recorder to direct sunlight or place it near a
heater.
Do not store the DVD video camera/recorder in a place where the humidity is high
or in a dusty place:
• Dust entering the DVD video camera/recorder could cause malfunctions. If the humidity is high,
the lens could be moldy, and the DVD video camera/recorder could become inoperable. It is
recommended that you put the DVD video camera/recorder with desiccant in a box when storing
it in a closet, etc.
Do not store the DVD video camera/recorder in a place subject to strong
magnetism or intense vibrations:
• This could cause malfunctions.
Detach the battery from the DVD video camera/recorder and store it in a cool place:
• Leaving the battery attached or storing it at high temperature could shorten its life.
English
9
English
Suggestions and Restrictions
Make a trial recording:
• Always make a trial recording before doing actual recording to make sure that recording is normal.
The data that have not been stored normally because of a defect in the DVD video camera/
recorder cannot be restored.
It is recommended that you use DVD-RAM disc from which recorded contents can be deleted for
trial recording.
Do not use the DVD video camera/recorder for professional applications:
• This DVD video camera/recorder is designed and produced for home-use recording and playback.
The recorded contents cannot be compensated for:
• Hitachi cannot compensate for any damages caused when recording is not made normally or
recorded contents cannot be played back because of a defect in the DVD video camera/recorder,
disc or card. Also, Hitachi cannot be responsible for your recorded video and audio.
• If you or a third party make a mistake when handling this DVD video camera/recorder, disc, card,
etc., the recorded contents may be lost. We cannot be responsible for compensation for damage due
to loss of recorded contents.
Copyright:
• Data recorded on the disc or card in this DVD video camera/recorder using other digital/analog
media or devices are protected by the copyright act and cannot be used without permission of the
owner of copyright, except for personal enjoyment. Be aware that recording is restricted for some
demonstrations, performances and exhibitions, even for personal enjoyment.
10
Read This First
To guide you, we have included following six chapters.
• The section on “Setups” explains how to set
up the DVD video camera/recorder, battery,
and set the date/time.
• The section on “Basic Techniques” explains the
basic operation of this DVD video camera/
recorder – recording of movies, still images
and playback of recorded images.
• The section on “Advanced Techniques”
explains settings on this DVD video camera/
recorder for more advanced usage.
• The section on “Disc Navigation” explains
editing with Disc Navigation: Refer to this
section when finalising DVD-R disc and
initialising DVD-RAM disc.
• The section on “Connecting to PC” explains
the contents of provided CD-ROM and how to
install the software included.
• “Subsidiary Information” includes an
introduction to products sold separately,
proper cleaning, and troubleshooting.
With this DVD video camera/recorder you can view the picture being recorded or the playback
picture whether on the LCD monitor or in the viewfinder. Opening or closing the LCD monitor
switches the picture to appear on the LCD monitor or in the viewfinder. The following text
describes the operation assuming that the viewfinder is used as a major monitor device.
It is possible to switch the language in the on-screen display of this DVD video camera/recorder
(see page 98).
We want this manual to be as helpful as
possible, so it includes two easy ways to find the
information you need:
• A quick index for the information you use
most often (this page).
• A detailed table of contents directing you to
specific information quickly (see pages 14 –
16).
Get to know your DVD video camera/recorder by
using this manual, and get to know Hitachi. We
appreciate your business.
Quick Index
Available Discs ................................................ 27
Recording Movie ............................................. 52
Playing Back.................................................... 61
Connecting to a TV.......................................... 79
Functions Available with Disc Navigation ...... 104
Connecting to PC .......................................... 135
English
®
Microsoft
2000 Professional, and Windows
Intel
IBM
Manufactured under licence from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Other company names and product names listed are trademarks or brand names belonging to each
individual company.
SD logo is a trademark.
, Pentium® Processor, and Celeron® Processor are registered trademarks of Intel Corporation.
®
and PC/AT® are registered trademarks of International Business Machines Corporation.
®
XP are registered trademarks of Microsoft Corporation.
11
English
Introduction
●You can start recording immediately after stopping playback (p. 52, 61)
Unlike tape devices, you do not need to search for the recording start position or locate the
beginning of blank portion.
You can stop playback and immediately start recording: New recording will not overwrite any
previously recorded data.
Recorded scenes
If you stop playback midway and start recording, overwrite will not occur.
●You can immediately play back desired recorded scenes (p. 102)
You do not need to rewind, unlike recorders using tape.
You can select any scene you want and immediately play it back (using Disc Navigation function).
●Use Disc Navigation to create your original movie (p. 121)
You can delete unnecessary scenes, move any scenes, etc., and create your original movie work (Play
List).
Before editing
After editing
12
●You can easily edit scenes, which
is quite difficult with tape (p. 82)
Using this DVD video camera/recorder, you can
collect scenes of your child, for example, on play
list of Disc Navigation function and create an
original movie: Then simply play back the play
list and dub it on VCR or DVD recorder.
Up to now, you had to
repeatedly press
buttons
With a DVD, you can
simply play it back on this
DVD video camera/
recorder: Press the record
button on VCR or DVD
recorder.
●Create original DVDs on PC
(p. 144)
You can create an original DVD, using the
provided software CD-ROM.
The created DVD disc can be played back on
DVD player/recorder, DVD-ROM drive, etc.
Original DVD being
created
Playback of DVD
English
13
English
Table of Contents
Important Information......................................... 2
For Your Safety.................................................. 2
Understand that the displays are different from those you will actually see in the viewfinder or on
the LCD screen.
●Notation of cancel button
Press the stop/cancel button to stop your operation midway, or return the menu screen to the
preceding one. The expression “press the C button” will be used in this text.
●1, 2 and 3 marks beside headings
Some functions of this DVD video camera/recorder are unavailable with disc or card used. Refer to
the marks at right above each function to identify whether the disc or card is compatible with the
function. Refer to these marks and identify the functions and operation to match the disc or card you
use.
●Illustrations in this manual
Although the external appearances of DZ-GX20E, DZ-MV780E, DZ-MV750E, and DZ-MV730E are
different, the method of operating these models is identical.
The illustrations of DZ-GX20E are used for the explanation in this text.
This instruction manual shows eight DVD video camera/recorder models - DZ-GX20E, DZ-
●
MV780E, DZ-MV750E, DZ-MV730E, DZ-GX20E (UK), DZ-MV780E (UK), DZ-MV750E (UK), and
DZ-MV730E (UK).
The DZ-GX20E and DZ-GX20E (UK) functions and specifications are referred to as “DZ-GX20E”.
The DZ-MV780E and DZ-MV780E (UK) functions and specifications are referred to as “DZMV780E”.
The DZ-MV750E and DZ-MV750E (UK) functions and specifications are referred to as “DZMV750E”.
The DZ-MV730E and DZ-MV730E (UK) functions and specifications are referred to as “DZMV730E”.
No model names are mentioned for functions and specifications common to all models; if there are
any differences between models, the model names are specified.
English
17
English
Checking Provided Accessories
Make sure that you have all the following accessories in package:
Battery (model DZ-BP14S):
For DZ-GX20E only.
Portable power supply for this DVD video
camera/recorder. Charge it before use.
DC power cord:
When powering the DVD video camera/
recorder from household AC outlet, use
this cord to connect the DVD video
camera/recorder and AC adapter/charger.
Infrared remote control
(model DZ-RM4W):
Use to control the DVD video camera/
recorder from a distance. For DZ-GX20E,
DZ-MV780E or DZ-MV750E only.
Shoulder strap:
Attach to the DVD video camera/recorder
to hang it from shoulder.
Battery (model DZ-BP7S):
For DZ-MV780E, DZ-MV750E or DZMV730E only. Portable power supply for
this DVD video camera/recorder. Charge it
before use.
Mains lead:
Connect between household AC outlet and AC adapter/charger.
for DZ-GX20E,
DZ-MV780E,
DZ-MV750E,
and DZ-MV730E
Lithium battery (model CR2032):
To power the remote control.
For DZ-GX20E, DZ-MV780E or DZMV750E only.
WARNING: Keep
this battery away
from children. If
swallowed, consult
a physician
immediately for
emergency
treatment.
Lens cap and lens cap string:
Attach the lens cap when not recording, to
protect the lens.
AC adapter/charger
(model DZ-ACS2 (E)):
Used to power the DVD video camera/
recorder from AC outlet, or charge battery.
for DZ-GX20E (UK),
DZ-MV780E (UK),
DZ-MV750E (UK),
and DZ-MV730E (UK)
AV/S output cable:
Used when viewing the picture played back
on the DVD video camera/recorder on TV
screen, or output video to another video
device.
Single-sided 8 cm DVD-R disc:
To record videos (movies) on this DVD
video camera/recorder.
For DZ-GX20E, DZ-MV780E or DZMV750E only.
Software CD-ROM:
Use this CD-ROM when connecting the
DVD video camera/recorder to PC. For DZGX20E, DZ-MV780E or DZ-MV750E only.
18
PC connection cable:
Use this cable when connecting the DVD
video camera/recorder to PC. For DZGX20E, DZ-MV780E or DZ-MV750E only.
Disc cleaning cloth:
Always use this to clean discs.
Names of Parts
789
SELECT
MENU
10
NAVIGATION
STOP/EXIT
English
DISC
23451
6
11
(Inside the cover)
1312
1 Light receiving sensor
(for DZ-GX20E only)
This sensor controls the amount of light to be
emitted from the built-in flash. Take care not
to block with hand, etc. during recording.
2 Flash (for DZ-GX20E only) (p. 78)
3 Lens cap string attachment hole (p. 35)
4 Stereo microphone (p. 53)
5 Recording indicator (p. 98)
The red indicator will light during recording.
6 Infrared receiver (p. 37)
When the remote control is used to operate
the DVD video camera/recorder, this
receiver will receive the infrared signal.
7 Optical 10× zoom lens
(for DZ-GX20E or DZ-MV780E only)
Optical 16× zoom lens
(for DZ-MV750E or DZ-MV730E only)
(p. 59)
8 Lens hood (p. 60)
Always remove this lens hood when using
generally available tele-conversion or wideconversion lens.
14
9 Zoom lever (p. 59)
Push the lever to the T side for telephoto, or
to the W side for wide-angle.
10 Accessory shoe (p. 78)
For DZ-GX20E, DZ-MV780E only:
The optional video flash can be attached
here. (See the instruction manual of device to
be attached for details.)
11 PC connection terminal (TO PC) (p. 146)
[for DZ-GX20E, DZ-MV780E or DZ-MV750E
only]
12 AV output jack (p. 79)
13 External microphone jack (p. 77)
14 2.5" type liquid crystal display (inside)
(p. 38)
Although the external appearances of DZGX20E, DZ-MV780E, DZ-MV750E and DZMV730E are different, the method of
operating both models is identical. DZGX20E illustrations are used in this manual.
19
English
1516172118
PHOTO
ACCESS/PC
DISC EJECT
19
20
22232526
24
15 Viewfinder (p. 39)
16 Dioptre control (p. 39)
To adjust the focus of image appearing in the
viewfinder. (Pull out the viewfinder.)
Will blink or light when the disc in DVD
video camera/recorder is accessed (write or
read is executed) or the DVD video camera/
recorder is connected to PC.
18 PHOTO button (p. 54)
19 DISC EJECT button (p. 48)
Press down and release this button to open
the disc guide.
20 Disc insertion block (p. 48)
21 BATTERY EJECT button (p. 43)
Press this button when removing the battery.
22 Battery attachment platform (p. 43)
23 Record button (REC) (p. 52)
24 LOCK switch (p. 53)
It is recommended that you set the LOCK
switch to L (to the upper position) to prevent
the power switch in the “O” position from
accidentally moving to “N”.
25 Power switch (p. 47)
26 Hand strap (p. 34)
20
27
282930 31 32 33
DISC
NAVIGATION
SELECT
STOP/EXIT
MENU
QUICK
FOCUS
EXPOSURE
VOL.
BLC
MENU
DISPLAY
English
34403637 383935
27 QUICK MENU button (p. 66)
To display only the functions that you
frequently use (simple menus).
28 FOCUS button (p. 74)
To switch between manual focus and autofocus.
29 MENU button (p. 40, 83, 108)
Press this button to display the menu for
setting camera functions and Disc
Navigation.
30 SELECT button (p. 103)
31 DISC NAVIGATION button (p. 100)
32 Stop/cancel button (p. 17, 61, 67)
To end playback or cancel setting of menu.
33 EXPOSURE button (p. 76)
Press this button to adjust the exposure.
34 Speaker (p. 61)
35 RESET button (p. 170)
To reset all settings to defaults (status when
the DVD video camera/recorder was
shipped from the factory)
41
42
36 DISPLAY (Screen display) button (p. 65)
Press this button to display the details of
image being played back or camera setting
status, or switch the display off.
37 CARD ACCESS indicator (p. 7, 54)
38 Volume control buttons (VOL)/
SR buttons (p. 61, 74, 76)
To adjust the volume of sound from speaker,
etc.
39 Card insertion block (p. 51)
40 BLC (backlight compensation) button
(p. 76)
Press this button when subject is being
lighted from rear.
41 f / e / d / c / A buttons
(p. 40, 61, 67, 83)
Use these buttons to select a scene or menu
item, and then press the centre (A) to play
back the scene, or designate an option from
the menu.
42 Tripod threaded hole
Used to attach the DVD video camera/
recorder to a tripod.
21
English
43
44
45
46
47
48
49
43 PHOTO button (p. 54)
44 REC button (p. 52)
45 MENU button (p. 40, 83, 108)
REC
MENU
SELECT
DELETE
DISC
NAVIGATION
DISPLAY
PHOTO
50
DIGITAL
ZOOM
ZOOM
51
52
53
54
55
56
57
58
51 ZOOM T button (p. 59)
52 DIGITAL ZOOM button (p. 59)
53 ZOOM W button (p. 59)
46 SELECT button (p. 103)
47 Reverse search button (p. 62)
48 DELETE button (p. 107)
49 DISC NAVIGATION button (p. 100)
50 DISPLAY button (p. 65)
54 Reverse skip button (p. 63)
55 Forward search button (p. 62)
56 Play/pause button (p. 61)
57 Stop button (p. 17, 61, 67)
58 Forward skip button (p. 63)
* The buttons on remote control will function the same as those on DVD video camera/recorder.
22
12
Try Recording and Playing Back using Disc
(Video and Photo)
Before You Begin
You can record both videos and photos on DVD-RAM disc; only videos on DVD-R disc.
• It is recommended that you use a DVD-RAM disc for trial recording,
since you can delete the recorded contents (p. 27).
1 Connect a power supply (p. 46).
Mains lead
1
2
4
3
DC power cord
AC adapter/charger
To AC o u t le t
* The shape of plug
varies depending
on the model.
2 Insert a disc (p. 48).
1 Press down the DISC EJECT button once
and release it.
3 Push the disc against the turntable at the
centre of disc insertion block to lock it
until a click is heard, and then close the
cover of disc insertion block: Do not touch
the disc recording surface or pickup lens
at this time.
English
DISC EJECT
2 Gently open the cover until it stops.
Tu r nt a b le
Disc cover
23
English
3 Start recording (p. 52).
1 Open the LCD monitor (p. 38), or pull out
the viewfinder (p. 39).
2 While holding down the button on the
right of power switch, set the switch to
“O” or “N” (only “O” for DVD-R disc).
OFF
Note:
• When using an unformatted disc, format (initialise) it on this DVD video camera/recorder.
If unformatted disc is inserted into this DVD video camera/recorder, a message will appear: Format the disc
following the instructions on screen (p. 49, 129). Initialising the DVD-RAM disc will erase all the recorded
contents: Make sure the contents on disc are not valuable before initialising the disc.
• See Check 1 on p. 155 if recording is not possible with “
• See Check 2 on p. 155 if recording is not possible with “N”.
OFF
3 When recording a video, press the REC
button.
Recording will start.
Pressing the REC button again will stop
recording (O).
When recording a photo, press the
PHOTO button.
Pressing PHOTO half way (half press)
allows you to focus the subject, and the
“m” indicator will turn purple. Press
PHOTO all the way down to record.
O”.
OFF
4 View the playback of recorded content on LCD monitor screen (p. 38).
1 After recording is finished, press the A
button.
The recorded scene will be played back.
2 Press the C button to stop playback.
STOP/EXIT
24
12
3
Try Recording and Playing Back using Card
(Photo)
Photos can only be recorded on card sold separately.
1 Connect a power supply (p. 46).
Mains lead
1
2
4
3
DC power cord
AC adapter/charger
To AC o u t le t
* The shape of plug
varies depending
on the model.
2 Insert a card (p. 51).
1 Open the LCD monitor (p. 38).
3 Put in a card.
English
2 Open the cover of card insertion block
with power turned off.
4 Insert the card all the way until it locks,
and then close the cover of card insertion
block.
25
English
3 Start recording (p. 54).
1 Open the LCD monitor (p. 38).
2 While holding down the button on the
right of power switch, set the switch to
“P”.
OFF
Note:
• With the DZ-GX20E only, the built-in flash may emit light in a dark area (see page 78).
• See page 27 for the cards that can be used on this DVD video camera/recorder.
• See Check 2 on p. 155 if recording is not possible with “P”.
OFF
3 Press the PHOTO button half way (half
press): When a subject image is focused,
the “m” indicator will turn purple.
4 Press the PHOTO button all the way (full
press).
4 View the playback of recorded content on LCD monitor screen (p. 38).
1 Press the A button in recording pause
status: The recorded scene will be played
back.
2 Press the C button to stop playback.
STOP/EXIT
26
12
Discs and Cards
The following table lists the storage media (discs and cards) that can be used on this DVD video
camera/recorder and the functions which are available with them:
Media
FunctionDVD-RAM discDVD-R discSD memory card
Deleting and editing images∴×∴
Playing back on other DVD
1: Can be played back on DVD players with a logo , or DVD recorders with a logo . Not playable on those
machines, however, if they are not compatible with 8 cm DVD-RAM discs.
*
2: Must be finalised (see “Terminology”, p. 152) on this DVD video camera/recorder before DVD-R disc can be
played back on DVD player or DVD recorder (see page 132). May not be playable on some DVD players or DVD
recorders.
*
3: When using media sold on market as labelled “formatted”. The media whose initialisation format is different can
be used only after they are formatted on this DVD video camera/recorder.
*
4: Some DVD devices can play SD memory cards.
AVAILABLE DISCS
Available Discs
Possible on
compatible machine
*3
DVD-RAM Ver. 2.1 (8 cm)
*2
*1
∴
NecessaryUnnecessary
Usable discs and logos
*4
×
*3
∴: Functions available; ×: Not available
English
DVD-R [for General Ver. 2.0 (8 cm)]
This DVD video camera/recorder can use only
the 8-cm bare discs not packed in a square
cartridge, square caddy case or round DVD
holder. The discs in a square cartridge, square
caddy case or round DVD holder can be used if
they are removed from the package, but take
great care not to dirty or scratch the bare disc
(see pages 149 and 150).
Note:
• It is recommended that you use Hitachi Maxell HG
type single-sided discs, since their compatibility with
this DVD video camera/recorder has been confirmed.
When using an HG type double-sided disc, take great
care with handling it. Using a disc other than these
discs may not allow the DVD video camera/recorder
to deliver optimum performance.
• See page 28 for information on DVD-R disc.
27
INFORMATION ON DVD-R DISC
English
You cannot record a still on DVD-R disc, or
delete any recorded images or data.
For optimum recording on DVD-R disc, this
DVD video camera/recorder writes control data
to the disc in order to automatically make
adjustments when it is inserted and ejected
accompanying recording. If the disc has no area
to be written for adjustment, recording may not
be possible. To prevent this, do not insert or eject
a DVD-R disc accompanying recording more
than 100 times.
Although some models are compatible with the
VR mode using DVD-R disc, this DVD video
camera/recorder is not compatible with that
mode.
●Finalising DVD-R disc
Before using the 8 cm DVD-R disc provided on
this DVD video camera/recorder on a DVD
player or DVD video recorder that is compatible
with 8 cm DVD-R disc, the disc must be
finalised on this DVD video camera/recorder.
For the finalising procedure of 8 cm DVD-R disc,
refer to “FINALISING DVD-R DISC (FINALIZE
DISC)” (p. 132).
Note:
• When using an unformatted DVD-R disc, it is
necessary to format it on this DVD video camera/
recorder (see page 49).
• Do not insert a DVD-R disc recorded on this DVD
video camera/recorder but not finalised, into a
recordable device, such as a DVD recorder: The
recorded data may be damaged (except for devices
that allow playback of a DVD-R disc not finalised on
this DVD video camera/recorder).
• Use only DZ-GX20E, DZ-MV780E, DZ-MV750E or
DZ-MV730E to record on or finalize a DVD-R disc
recorded on this DVD video camera/recorder but not
finalized: Using any other device could damage the
data recorded on the disc.
• DVD-R discs edited and finalised on PC or those
finalised on another DVD recorder may not be
playable on this DVD video camera/recorder,
depending on the editing software used or recorded
status of DVD-R disc.
• If you insert a DVD-R disc recorded on a DVD video
camera/recorder other than DZ-GX20E, DZ-MV780E,
DZ-MV750E or DZ-MV730E and not finalised, the
Disc Navigation screen will automatically start, and no
recording can be done on the disc nor can it be
finalised.
EXAMPLES OF DISCS THAT CANNOT BE USED ON THIS DVD VIDEO
CAMERA/RECORDER:
• DVD-RAM (2.6 GB) Ver. 1.0
• CD-RW
• DVD-R (3.9 GB) Ver. 1.0
• CD
• DVD-R (4.7 GB) for Authoring Ver. 2.0
• LD
• DVD-RW
• MO
• DVD+RW
• MD
• DVD+R
• iD
• DVD-ROM
• Floppy disk
• DVD-Video
• Discs other than those with diameter of 8 cm
• CD-R
• CD-ROM
• DVD-R (double-layered)
Note:
Discs recorded on PC or DVD recorder may not be
playable on this DVD video camera/recorder: If so,
message “This disc cannot be used.” will appear. Also,
blue thumbnails will appear (Fig. 1* on page 29), or
normal playback will not be possible.
28
HANDLING DISCS
●Using discs
DVD-RAM and DVD-R discs are very delicate
recording media. Carefully read the following
cautions and observe them:
• Always use a brand new disc when recording
important material.
• Be sure not to touch the recording surface of
disc, or dirty or scratch it.
• If there is dust, scratch, dirt on disc or if it is
warped, the following phenomena may occur:
− Block noise in playback
image
− Momentary stop of
playback image
− Sound interrupted during
playback, or abnormal
sound
− Blue thumbnail
display* (Fig. 1)
− Disc cannot correctly
be recognised
− Disc cannot be
initialised
− Delay between video
and audio
Even if disc is normal, the above phenomena
may occasionally occur. While the ACCESS/
PC indicator is lit, do not subject disc to
vibrations or impact, and avoid using DVD
video camera/recorder at extremely high or
low temperatures, or in environment where
condensation is likely to occur.
PLAY
*
Block noise
001/ 006All Programs
RAM
Fig. 1
• When recording images,
the DVD video camera/
001 / 002All Programs
recorder may avoid the
portions of disc where
recording is not possible,
due to dust, scratches,
etc. [It will pause m at
such a portion and
automatically restart
PLAY
(Recording one scene
may produce multiple
thumbnails.)
RAM
recording (n).]
This will cause recording to be interrupted for
several seconds to several minutes, and
multiple thumbnails will be created by one
recording session as shown above. In this case,
the recordable time on disc will decrease.
• Be careful when removing the disc since the
metal of removal slot of DVD video camera/
recorder, and disc itself, may be hot.
●Storing discs
• When storing disc, replace it in the plastic case
in which it was purchased.
• Be careful that no condensation occurs on disc.
• Do not place disc in following places:
− Direct sunlight for a long time
− Where humidity is high or in dusty place
− While there is heat from a heater, etc.
English
DISC CLEANING
Use the disc cleaning cloth provided to lightly
wipe off any dirt adhering to the disc as shown
in the figure. Do not wipe the disc with force:
Doing so could cause scratches.
Never use solvent (thinner, water, antistat or
detergent) for cleaning.
Lightly wash the dirty cleaning cloth with
detergent: The dirt removal capacity of the cloth
will improve (rinse the cloth well with water so
that no detergent remains).
Use the disc cleaning
cloth to clean from inner
to outer edges in axial
direction.
29
AVAILABLE CARDS
English
SD memory card can be used on this DVD video
camera/recorder.
When using an exclusive adapter, a miniSD
memory card can be used in the same way as an
SD memory card.
●Handling card
• Do not use cards other than
the designated ones.
• Be sure to use a brand new
card when recording vital
images.
• Do not touch the card
terminal or allow it to touch
metal.
• Do not paste anything other
than exclusive label on label pasting portion.
• Do not subject card to impact, bend or drop it.
• Do not disassemble card or modify it.
• Do not expose card to water.
• Do not use or store card in the following
places:
− Where the temperature is high, such as in
vehicle at high temperatures, under burning
sun or near a heater.
− Where humidity is high, or in dusty place
• When the erasure prevention switch is locked,
no recording, deletion or editing will be
possible on the card: Only playback will be
possible.
Terminal
●
Common cautions for disc and card
• It is recommended that you create a backup
file for valuable data on hard disk of PC.
• Do not do the following, or the data on disc or
card may be damaged or lost:
− Do not remove the disc or card or turn DVD
video camera/recorder off during reading or
writing of data
− Do not use DVD video camera/recorder in a
place subject to static electricity or electrical
noise
− Do not have printing done at a print lab or
DPE service.
Note:
• This DVD video camera/recorder can play back image
data recorded on other digital cameras conforming to
the DCF (Design rule for Camera File system)
standard. The range of image data playable on this
DVD video camera/recorder is that with pixels from 80
horizontal × 60 vertical to 4000 horizontal × 3000
vertical.
• DCF is an integrated image file format of digital
cameras: Image files can be used on all digital
devices conforming to DCF.
• Image data edited on PC and certain types of image
data may not be visible on this DVD video camera/
recorder.
• The image data recorded on another device may not
be playable on this DVD video camera/recorder.
Erasure prevention
switch
30
Locked status
Loading...
+ 149 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.