Hitachi DZMV208EAU, DZMV230EUK, DZMV238EAU, DZMV200EUK User Manual

DZMV238EAU
DZMV230EUK
DZMV208EAU
DZMV200EUK
Instruction manual
To obtain the best performance and ensure years of trouble-free use, please read this instruction manual completely.
Important Information
For Y our Safety
The power switch turns the DVD video camera/recorder on and off, leaving the date/time feature unaffected. If the camera/recorder is to be left unattended for a long period of time, turn it off .
WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
WARNING : TO PREVENT FIRE OR SHOCK HAZARD, USE THE
RECOMMENDED ACCESSORIES ONL Y .
The DVD video camera/recorder and A C adapter have the following caution marks.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT OPEN.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
WARNING: Many television programmes and films are copyrighted. In certain circumstances, copy-right law may apply to private in-home videotaping of copyrighted materials.
This Class B digital apparatus complies with Canadian ICES-003.
The liquid crystal display (LCD) panel is made by highly precise technology. More than 99.99% of its picture elements (pixels) are effective, but some (less than 0.01%) may appear as coloured bright dots. This does not indicate a fault as the LCD panel stretches the limits of current technology.
This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is danger­ous to make any kind of contact with any inside part of this unit.
This symbol alerts the user that impor­tant literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully to avoid any problems.
WARNING: To prevent risk of injury or damage to your camera/recorder and the AC adaptor, use only the specified batteries and AC adaptor. Batteries; DZ-BP14(R), DZ-BP16 and DZ-
BP28. (The DZ-BP14(R) is supplied with this camera/ recorder.)
AC adapter;DZ-ACE1
CLASS 1 LASERPRODUCT
CAUTION This product contains a laser diode of higher class than 1. To ensure continued safety, do not remove any covers or at­tempt to gain access to the inside of the product. Refer all servicing to qualified per­sonnel.
2
IMPORTANT SAFEGUARDS
In addition to the careful attention devoted to quality standards in the manufacture of your video product, safety is a major factor in the design of every instrument. But, safety is your responsibility too. This page lists important information that will help to assure your enjoyment and proper use of DVD video camera/recorder and accessory equipment. Please read it carefully before operating your video product and keep it in a handy place for future reference.
INSTALLATION
Read and Follow Instructions — All the safety and op-
1
erating instructions should be read before the video product is operated. Follow all operating and use instructions.
Retain Instructions — The safety and operating instruc-
2
tions should be retained for future reference.
Heed Warnings — Comply with all warnings on the video
3
product and in the operating instructions.
Polarized Plug — This video product is equipped with a
4
polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the mains outlet only one way . This is safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. To prevent electric shock do not use this po­larized plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted without blade exposure. If you need an extension, use a polarized cord.
Power Sources — This video product should be operated
5
only from the type of power source indicated on the marking label. If you are not sure of the type of mains supply to your home, consult your video dealer or local power company. For video products intended to operate from battery power , or other sources, refer to the operating instructions.
Overloading — Do not overload wall outlets and extension
6
cords as this can result in a risk of fire or electric shock. Over­loaded AC outlets and extension cords are dangerous, and so are frayed mains cables, damaged or cracked wire insulation and broken plugs. They may result in a shock or fire hazard. Periodically examine the cord and have it replaced by your service technician if appearance indicates damage or deterio­rated insulation.
Mains-Lead Protection — Mains leads should be routed
7
so that they are not likely to be walked on or pinc hed by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
Ventilation — Slots and openings in the cabinet are pro-
8
vided for ventilation to ensure reliable operation of the video product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the video product on a bed, sof a, r ug, or other similar surface. This video product should ne ver be placed near or over a radiator or heat register. This video product should not be placed in a built-in installation such as a book­case or rack unless proper ventilation is provided or the video product manufacturer’s instructions have been followed.
3
Attachments Do not use attachments unless recom-
9
mended by the video product manufacturer as they may cause hazards.
Caution: Maintain electrical safety. Mains operated equipment or accessories connected to this unit should bear the UL listing mark or CSA certification mark on the accessory itself and should not have been modified so as to defeat the safety features. This will help avoid any potential hazard from electric shock or fire. If in doubt, contact qualified service personnel.
Water and Moistur e Do not use this video product near
10
water for example, near a bath, wash bowl, kitchen basin, or laundry tub, in a wet basement, or near a swimming pool, and the like.
Accessories Do not place this video product on an unsta-
11
ble cart, stand, tripod, bracket, or table. The video product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the video product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mount- ing accessory recommended by the manufacturer.
An appliance and cart combination
12
should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart com­bination to overturn.
Power Lines An outside antenna system should not be
13
located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching or ap­proaching such power lines or circuits as contact with them might be fatal. Installing an outdoor aerial can be hazardous and should be left to a professional aerial installer.
USE
Cleaning Unplug this video product from the wall outlet
14
before cleaning. Do not use liquid cleaners or aerosol clean­ers. Use a damp cloth for cleaning.
Object and Liquid Entry Never push objects of any
15
kind into this video product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the video product.
Lightning For added protection for this video product
16
during a lightning storm, or when it is left unattended and un­used for long periods of time, unplug it from the wall outlet and disconnect the aerial or cable-system. This will prevent damage to the video product due to lightning and power-line surges.
4
SERVICE
Servicing Do not attempt to service this video product
17
yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to quali­fied service personnel.
Conditions Requiring Service Unplug this video prod-
18
uct from the wall outlet and refer servicing to qualified service personnel under the following conditions. a. When the mains lead or plug is damaged. b. If liquid has been spilled, or objects have fallen into the
video product. c. If the video product has been exposed to rain or water. d. If the video product does not operate normally by follow-
ing the operating instructions. Adjust only those controls
that are covered by the operating instructions. Improper
adjustment of other controls may result in damage and
will often require extensive work by a qualified technician
to restore the video product to its normal operation. e. If the video product has been dropped or the cabinet has
been damaged. f. When the video product exhibits a distinct change in per-
formance this indicates a need for service.
Replacement Parts When replacement parts are re-
19
quired, have the service technician verify that the replacements he uses have the same safety characteristics as the original parts. Use of replacements specified by the video product manufacturer can prevent fire, electric shock or other hazards.
Safety Check Upon completion of any service or repairs
20
to this video product, ask the service technician to perform safety chec ks recommended by the manufact urer to determine that the video product is in safe operating condition.
Heat The product should be situated away from heat
21
sources such as radiators, heat registers, stoves, or other prod­ucts (including amplifiers) that produce heat.
5
Important for United Kingdom (for DZ-MV230E(UK)/DZ-MV200E(UK))
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA or BSI approved BS 1362 fuse must be used of the same rating. If the fuse cover is detachable nev er use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug. Fuse covers are available from your dealer. DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. If there is no alternative to cutting off the mains plug, ensure that you dis pose of it immediately, having first removed the fuse, to a void a possible
shock hazard by inadvertent connection to the mains supply.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
Blue= Neutral, Brown=Live As these colours may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED. On no account connect either of these wires to the terminal marked E or by the earth symbol yellow.
or coloured green or green and
Microsoft, MS, MS-DOS, Windows and Windows NT are registered trademarks of Microsoft Corporation. Manufactured under license from Dolby Laboratories. “Dolby” and double-D symbol are trademarks of Dolby Laboratories. Other company names and product names listed are trademarks or brand names belonging to each company.
6
Read This First
To guide you, we’ve included following six chapters.
The section on Setups explains how to set up the DVD video camera/recorder, battery pack, and set the date/time.
The section on Basic Techniques explains the basic operation of this DVD video camera/re­corder – r ecording of movies and still images and playback of recorded images.
The section on Advanced T echniques explains settings on this DVD video camera/recorder for more advanced usage.
The section on Using Disc Navigation explains editing with Disc Navigation: Refer to this sec­tion when finalising DVD-R disc and initialising DVD-RAM disc.
The section on Connecting to Other Devices explains how to connect to TV, another AV de­vice and PC, and how to operate after connec­tions.
•“Subsidiary Information includes an introduc- tion to products sold separately, proper clean­ing, and troubleshooting.
Type of difference
DZ-MV238E(AU) Movie recording mode CCD (Number of total pixels) Number of still image pixels (JPEG) Input Selection External still input
XTRA*/FINE/STD
1,160,000
1,280 × 960
Yes Yes
We want this m anual to be as helpful as possible, so it includes two easy ways to find the informa­tion you need:
A quick index for the information you use most often (this page).
A detailed table of contents directing you to spe­cific information quickly (page 8~9).
Get to know your D VD video camer a/recorder by using this manual, and get to know Hitachi. We appreciate your business.
Quick Index
Charging Battery Recording Movie Immediately Checking Recorded Scene Functions A vailable with Disc Navigation Connecting to a TV and Viewing Connecting to Your PC
DZ-MV208E(AU)
FINE/STD
800,000
1,024 × 768
Yes Yes
...........................................
..........................................
.................................
DZ-MV230E(UK)
XTRA*/FINE/STD
1,160,000
1,280 × 960
No No
* On DVD-RAM disc only
DZ-MV200E(UK)
FINE/STD
1,024 × 768
...
....
................
800,000
No No
31
42
44 68 91 95
With this DVD video camera/recorder you can view the picture being recorded or the playback picture whether on the LCD monitor or in the viewfinder. Opening or closing the LCD monitor switches the picture to appear on the LCD monitor or in the viewfinder. The following text de­scribes the operation assuming that the viewfinder is used as a major monitor device.
7
Table of Contents
Important Information ..................................... 2
For Y our Safety.................................................. 2
IMPORTANT SAFEGUARDS ............................ 3
Read This First................................................... 7
About This Manual ......................................... 10
Checking Provided Accessories......................11
Names of Parts ............................................... 12
Viewing Demonstration ................................. 16
Features of DVD video camera/recorder ...... 17
Versatile Functions Available...................... 17
Recording on Disc...................................... 18
Recording Movie and Still .......................... 18
Immediate Reviewing of Recorded
Image......................................................... 18
Editing in Various Ways on DVD video
camera/recorder Alone .............................. 18
Using with Various Devices ....................... 18
Cautions When Using .................................... 19
Cautions When Storing .................................. 22
Suggestions and Restrictions........................ 22
Discs ................................................................ 23
Removing and Replacing Disc from/
in Cartridge or Caddy ................................. 24
Disc Storage Capacity................................ 26
Setups
Setting Up the DVD video camera/
recorder........................................................... 27
Holding DVD video camera/recorder ......... 27
Attaching Shoulder Strap ........................... 27
Attaching Lens Cap.................................... 28
Attaching Ferrite Cores .............................. 28
Inserting Batteries into Remote Control .... 29
Setting Up the Battery.................................... 30
Attaching Battery to DVD video camera/
recorder ..................................................... 30
Removing Battery ...................................... 30
Charging Battery ........................................ 31
Battery Remaining Level Indicator ............. 33
Using DVD video camera/recorder
with AC Adapter ............................................. 34
Setting Date and Time.................................... 35
Changing Display Format of Date
and Time .................................................... 36
Inserting and Ejecting Disc ............................ 37
Inserting Disc............................................. 37
Removing Disc........................................... 39
Basic Techniques
Basic Handling of DVD video camera/
recorder........................................................... 40
Turning DVD Video Camera/
Recorder On .............................................. 40
Opening LCD Monitor ............................... 40
LCD Screen Brightness Adjustment.......... 41
Closing LCD Monitor ................................. 41
Viewing Subject through Viewfinder .......... 41
Recording Movie ............................................ 42
Using External Microphone ....................... 42
Recording Stills .............................................. 43
Playing Back.................................................... 44
Immediately Checking Recorded Scene.... 44
Skip Playback ............................................. 44
Search Playback ......................................... 45
Frame Adv ance/Frame Back/
Slow Playback ............................................ 45
Searching for Point You Wish to View by
Specifying It (Go To) ................................... 46
Zooming.......................................................... 47
Focusing When Recording Movie .............. 48
Macro Recording ....................................... 48
Manually Focusing Subject during Movie
Recording........................................................ 49
Adjusting Exposure Manually ....................... 50
On-Screen Information .................................. 51
Information Display During Recording ....... 51
Information Display During Playback.......... 53
Advanced T echniques
Setting Up Camera Functions ....................... 54
Selecting Shooting Mode to Match the Subject
(Switching P rogramme AE Mode) ................. 54
White Balance (Auto/Hold)......................... 55
Using the Electronic Image Stabilizer
(EIS) ........................................................... 56
Switching Digital Zoom Off ........................ 57
Switching to 16:9 Mode ............................. 58
Setticng Up Record Functions....................... 59
Switchisng Movie Quality Mode ................ 59
Input Selection (for DZ-MV238E(AU) and
DZ-MV208E(AU)) ....................................... 60
Changing Method for Recording Stills (for DZ-MV238E(AU) and
DZ-MV208E(AU)) ....................................... 61
Self-Timer .................................................. 62
Switching On-Screen Display Output On
or Off ......................................................... 63
Initial Settings................................................. 64
Switching Operating Sound On or Off ....... 64
Setting or Releasing Power Save ............... 64
8
Turning Record LED On or Off ................... 65
Changing Display Language....................... 65
Initialising All Settings to Defaults................ 66
Finalising Disc ............................................ 90
Playing Back Scenes Repeatedly
(Repeat Play).............................................. 90
Disc Navigation
Before Using Disc Navigation ....................... 67
Structure of Data Recorded On This DVD
Video Camera/Recorder............................. 67
Using Disc Navigation ................................... 68
Functions Available with
Disc Navigation .......................................... 68
Starting Disc Navigation and Interpreting
Navigation Screen...................................... 70
Playing Back Scenes .................................. 71
Selecting Random Scenes......................... 71
Selecting Consecutive Scenes Together.... 71
Understanding Flow of Disc Navigation
Menu ............................................................... 72
Programme ..................................................... 73
Switching to Thumbnail Display of Specific
Date (Selecting Programme)...................... 73
Playing Back Programme ........................... 73
Changing Title of Programme .....................74
Play List ........................................................... 75
Creating New Play List .............................. 75
Switching Play List
(Switching to Display of Each Play List) ..... 76
Playing Back A Play List ............................. 76
Adding Scenes to Play List ........................ 77
Deleting Scenes from Play List.................. 78
Editing Play List
(Adding Scenes Using Menu) .................... 78
Editing Play List
(Deleting Scenes Using Menu) .................. 79
Editing Play List
(Selecting Scenes Using Menu) ................ 79
Changing Title of Play List .......................... 80
Deleting Play List ....................................... 80
Scene............................................................... 81
Deleting Scenes ........................................ 81
Adding Special Effects (Fade) .................... 82
Combining Multiple Scenes....................... 84
Dividing Movies ......................................... 84
Arranging Order of Scenes (Move) ............ 85
Playing Back by Skipping Scenes (Skip) ..... 86
Selecting Scenes Using Menu Screen ...... 86
Displaying Information Using Menu
Screen ....................................................... 87
Disc Management .......................................... 88
Verifying Remaining Free Space on Disc
(Capacity) ................................................... 88
Initialising DVD-RAM Disc ......................... 88
Updating Control Information .................... 89
Connecting to Other Devices
Viewing on TV Screen .................................... 91
Connecting to a TV ..................................... 91
Viewing on TV Screen ................................ 92
Recording Image from Other AV Devices (for DZ-MV238E(AU)
and DZ-MV208E(AU))..................................... 93
Connecting to Other AV Device ................. 93
Recording Image from Other Camcorder
or AV Device .............................................. 94
Cautions when connecting DVD video
camera/recorder to PC ................................... 95
Capturing Data for PC .................................... 96
Using DZ-WINPC3(W) PC kit ..................... 96
Using Disc on PC ....................................... 98
Subsidiary Information
Cleaning .......................................................... 99
If dust adheres to viewfinder lens ............. 99
Trouble Messages ........................................ 100
Trouble shooting .......................................... 105
System Reset ................................................. 110
Major Specifications ..................................... 1 11
Introduction to Optional Accessories ..........112
Camera Accessories ................................. 112
Power Supplies .........................................112
Miscellaneous...........................................112
Index............................................................... 113
9
About This Manual
Photographs in this manual:
Photographs taken using digital still camera are used for explanation of images that appear in the view­finder or on the LCD screen in this manual. Understand that they look different from those you will actually view in the viewfinder or on the LCD screen.
Note: The DZ-MV238E(AU) displays are used for the following explanation. Some items do not appear, depending on the model.
About joystick:
Y ou can tilt it up, down, to left or right, or pr ess its centre: The way you move it will determine the results. Normally, move the joystick up, down to left or right to select a menu item or scene, and then press the centre to enter the selection.
Operation Notation in this manual
button
Notation of cancel button:
Press the stop/cancel button to stop your operation midway, or return the menu screen to the preceding one. The expression press the
button will be used in this text.
and marks beside headings:
This DVD video camera/recorder has some functions available only with DVD-RAM disc, or operation only necessary for DVD-R disc. Refer to these marks and identify the functions and operation to match the disc you use.
10
Checking Provided Accessories
Make sure that you have all the following accessories in package:
Battery (model DZ-BP14(R)):
Portable power supply for this DVD video camera/recorder. Charge it before use.
Infrared remote control (model DZ-RM2W):
Use to control the DVD video camera/recorder from a distance.
Shoulder strap:
Attach to the DVD video camera/ recorder to hang it from shoulder.
Ac adapter (model DZ-ACE1):
Connect this device to the DVD video camera/recorder to power it from AC outlet.
2 “AA” batteries:
To power the remote control.
Lens cap and lens cap string:
Attach the lens cap when not recording, to protect the lens.
Power cable:
Connect between household AC outlet and AC adapter. for DZ-MV238E(AU) and DZ-MV208E(AU)
for DZ-MV230E(UK) and DZ-MV200E(UK)
AV input/output cable
Used when viewing the picture played back on the DVD video camera/recorder on TV screen, or input or output video from/to another video device.
2 Ferrite cores:
Attach these to the S-VIDEO cable, and the external microphone cable if you are using one.
8 cm DVD-R disc:
8 cm DVD-RAM disc (sample):
(for DZ-MV238E(AU), DZ-MV208E(AU) and DZ-MV230E(UK))
11
Names of Parts
qwe r ty
uio !0 !1 !2 !3 !4
q Optical 12x zoom lens (p. 47) w Lens hood (p. 48) e Accessory shoe (p. 43)
Slide the cover to remove it, and then attach the optional video flash, etc., here. (See the instruction manual of device to be attached for details.)
r Disc guide (p. 37) t SELECT button (p. 71) y MENU button (p. 54, 72)
Press this button to display the menu for setting camera functions and Disc Navigation. The camera menu will appear even if disc is not loaded.
u Recording indicator (p. 65)
The red indicator will light during recording.
i Infrared receiver (p. 29)
When the remote control is used to operate the DVD video camera/ recorder, this receiver will receive the infrared signal.
12
o Stereo microphone (p. 42) !0 2.5" type liquid cr ystal display
(inside) (p. 40)
!1 OPEN button (p. 40)
Press this button and hold it while opening the liquid crystal display (LCD).
!2 Stop/cancel button (p. 16, 44)
To end playback or set menu.
!3 Joystick (p. 10)
Move the joystick to select a scene or menu item, and play back scenes.
!4 DISC NAVIGA TION button (p. 70)
!5 !6 !7 !8 !9 @1
TO PC
/
V
A
(Inside the cover)
@0
@6 @8
@7@2 @3 @4 @5
!5 AV input/output jack (p. 91) !6 PC connection terminal (TO PC)
(p. 97)
!7 External microphone jack (p. 42) !8 Viewfinder (p. 41) !9 DISC EJECT button (p. 37)
Press down this button to open the disc guide.
@0 CHARGE/ACCESS indicator
(p. 21, 31) Will blink or light during char ging, or while the DVD video camera/ recorder is operating.
@1 Zoom lever (p. 47)
Push the lever to the T side for tel­ephoto, or to the W side for wide­angle.
@2
Battery attachment platform (p. 30)
@3 DC cord connection terminal
(DC IN 8.4V) (p. 31)
@4 S-VIDEO output jack (p. 91)
@5 Record button (REC) (p. 42) @6 Power switch (p. 42, 43)
PHOTO : To r ecord still
images
VIDEO : To record a movie
POWER OFF: T o turn of f the DVD
video camera/re-
corder Press the red button at the centre of power switch and turn it only when turning power on: It is not necessary to press the button when setting the switch to “POWER OFF”. The power switch cannot be changed over during recording. For playback, set the power switch to either “
PHOTO” or “ VIDEO”.
@7 LOCK switch (p. 42)
T o lock the r ecor ding mode, so that the VIDEO mode is not switched to the PHOTO mode by mistake.
@8 Hand strap (p. 27)
13
@9 #0 #2
SELECT
DISC
NAVIGATION
DISPLAY
LCD
BRIGHT
RESET
EXPOSURE FOCUS
VOL.
#1
MENU
#6#3#4#5
@9 Speaker (p. 44)
The sound accompanying a movie being played back will be heard from here.
#0 Screen display button (DISPLAY)
(p. 52) Press this button to display the de­tails of image being played back or camera setting status, or switch the display off.
#1 Eyecup (p. 41, 99) #2 Dioptre control (p. 41)
To adjust the focus of image ap­pearing in the viewfinder.
#3 RESET button (p. 110)
To reset all settings to defaults.
#7
#8
#4 LCD BRIGHT button (p. 41)
Press this button to start LCD screen brightness adjustment.
#5 EXPOSURE button (p. 50)
Press this button to adjust the ex­posure.
#6 FOCUS button (p. 49)
To switch between manual focus and auto-focus.
#7 Volume control buttons (VOL)/
buttons (p. 41, 44)
T o adjust the volume of sound from speaker, etc.
#8 BATTERY EJECT button (p. 30)
To release the battery.
14
#9 $0
$1 $2 $3 $4
DISPLAY REC
DIGITAL
ZOOM
DISC
NAVIGATION
DZ-RM2W
ZOOM
SELECT
MENU
DELETE
$5 $6 $7
$8 $9 %0
%1 %2 %3
#9 DISPLAY button (p. 52) $0 DIG. ZOOM button (p. 57) $1 DISC NAVIGATION button (p. 70) $2 REVERSE SEARCH button (p. 45) $3 STOP button (p. 16, 44) $4 FORWARD SKIP button (p. 44) $5 REC button (p. 42)
$6 ZOOM T button (p. 47) $7 ZOOM W button (p. 47) $8 SELECT button (p. 71) $9 REVERSE SKIP button (p. 44) %0 MENU button (p. 54, 72) %1 PLAY/PAUSE button (p. 44) %2 FORWARD SEARCH button (p. 45) %3 DELETE button (p. 78)
* The buttons on remote control will
function the same as those on DVD video camera/recorder.
15
Viewing Demonstration
This DVD video camera/recorder has versatile functions, including special effects. Before using the DVD video camera/recorder, view the demonstration to see what it can do. Referring to step 2 on page 31, connect the DVD video camera/recorder, AC adapter and power cable to power the DVD video camera/recorder from AC outlet.
Press the MENU button.
1
Choose Initial Setup, Demo Mode, and
2
then press the The options will appear on the right of Demo Mode: The currently selected option.
Joystick
MENU button
button.
mark will be attached to the
Use the joystick to choose “Start”, and then
3
press the The demonstration will start: View it in the viewfinder or on the LCD screen. To stop the demonstration midway, press the
button.
The demo mode will end when the DVD video camera/recorder is turned off or the DISC EJECT button is pressed down.
Note: If you choose “Auto” in step 3, the demon­stration will automatically start approximately three minutes after the DVD video camera/recorder is turned on. Note: If a disc is loaded in the DVD video cam­era/recorder , the demonstration will not start even if “Auto” has been set. Note: When connecting the power cable to the DVD video camera/recorder, the pin of power cable cannot be completely inserted into the DC IN 8.4V jack, but this does not indicate a malfunc­tion. Do not insert the power cable with undue force: Doing so could result in malfunction. Note: The demonstration function will not work when the DVD video camera/recorder is con­nected to PC. Note: While the demonstration is being given, the recording indicator will blink.
button.
16
Features of DVD video camera/recorder
Versatile Functions Available
This DVD video camera/recorder has numerous useful functions. However, the functions that can be used will vary depending on whether DVD-RAM or DVD-R disc is used. Use the functions, following the table below:
Camera Functions:
Function
Program AE White Bal. EIS
Setup
Dig.Zoom 16:9
Camera Functions
VIDEO Mode* Input Source** PHOTO Input**
Setup
Self Timer OSD Output
Record Functions
Date Mode
Date
Date Set
Setup
Beep Power Save Record LED Language Demo Mode
Initial Setup
Reset
(* Except for XTRA mode, which can be set
on DZ-MV238E(AU) and DZ-MV230E(UK) only)
(** for DZ-MV238E(AU) and DZ-MV208E(AU))
Disc used
DVD-RAM
: Available; X: Unavailable
DVD-R
X X
Reference
page
54 55 56 57 58 59 60 61 62 63 36 35 64 64 65 65 16
110
Disc Navigation Functions:
Function
Switch Play Create Edit
Play List
Title Delete Switch Play Title
Program
Delete Edit Skip
Scene
Select Detail Capacity Format Disc Update
Disc
Control Info. Finalize Disc
Repeat Play
Others
Disc used
DVD-RAM
X
DVD-R
X X X X X X
X X X X
X X
Reference
page
76 76 75 78 80 80 73 73 74 81 82 86 86 87 88 88
89 90 90
17
Recording on Disc
Y ou can use both 8 cm DVD-RAM and DVD-R discs on this DVD video camera/recorder for recording. The recorded video and audio will be stored on an 8 cm DVD-RAM disc or 8 cm DVD-R disc. Using disc allows you to record without overwriting previous recordings, and also to store your valuable recordings for as long as need be while retaining clarity. With disc you can immediately access recording and playback, in contrast to videotape, which must be fast-forwarded or rewound.
In addition, simply loading a DVD-RAM disc into a PC equipped with DVD-RAM drive and DVD video recording software compatible with 8 cm DVD-RAM allows you to easily view the recorded disc. You can finalise a recorded DVD-R disc on this DVD video camera/recorder so that you can play it back on a DVD player or DVD recorder that is compatible with 8 cm DVD-R disc (however, the finalised DVD-R disc may not be usable on some DVD players).
Recording Movie and Still
The DVD video camera/recorder can record mov­ies of events and sports, in the same way as with conventional camcorders. It can also record stills on a DVD-RAM disc, as with a digital still camera. With CCD of 1,160,000 pixels (800,000 pixels for DZ-MV208E(AU) and DZ­MV200E(UK)), high-quality movies and stills (on DVD-RAM disc only) can be recorded. In both recordings of movie and still (on DVD-RAM disc
only), zooming up to 240 times is possible using the 12 power optical zoom multiplied by the 20 power digital zoom. Movies and stills can be recorded on the same disc, by simply switching the recording mode (power switch). However, if you use a DVD-R disc, a still image cannot be recorded. (If the DVD video camera/recorder is connected to PC, the DVD video camera/recorder can cap­ture still images, such as JPEG data.)
Immediate Reviewing of Recorded Image
You can check the movie or still recorded in the viewfinder or on the LCD screen.
Editing in Various Ways on DVD video camera/recorder Alone
This DVD video camera/recorder is provided with a useful editing/playback tool. Disc Navigation allows you to easily attach a title or special video effect to the recorded movie or still. W ith Disc Navi­gation, you can arrange the playback order and edit
multiple images to play them back continuously. You can create an entire movie on this DVD video camera/recorder alone, without inputting video to a PC for editing.
Using with Various Devices
Connect this DVD video camera/recorder to your TV and you can enjoy the playback picture with your family and friends on the large TV screen; or connect it to a video printer (generally available)
to print the recorded image. You can also transfer recorded movies and stills (for DVD-RAM disc only) to PC, using the optional PC kit (DZ­WINPC3(W)).
18
Cautions When Using
Handle the liquid crystal display (LCD) with care:
The LCD is a very delicate display device: Do not press its surface with any force, hit it, or puncture it with a sharp object.
If you push the LCD surface, unevenness in the display may occur. If unevenness does not dis­appear soon, turn the DVD video camera/re­corder off, wait for a while, and then turn it on again.
Do not place the DVD video camera/recorder with the open LCD screen down.
Close the LCD monitor when not using the DVD video camera/recorder.
Do not hold by the LCD monitor as this could cause a malfunction.
Open the LCD monitor by 90° before changing its direction. If you attempt to invert its direc­tion before opening it completely, it could cause a malfunction.
Do not disassemble the LCD monitor as this might cause a malfunction.
When opening the LCD monitor, be car eful that no water droplets adhere to the monitor screen and that no water or dust enters the DVD video camera/recorder as it could cause a malfunction.
Liquid Crystal Display and viewfinder:
The LCD screen and viewfinder will be slightly dimmer than usual when the DVD video cam­era/recorder is at low temperature, as in cold areas, or immediately after power is turned on. The normal brightness will be restored when the temperature inside the DVD video camera/re­corder rises.
Hold the DVD video camera/recorder correctly:
Do not hold the viewfinder or LCD monitor when lifting the DVD video camera/recorder: The viewfinder or LCD monitor may become detached and the DVD video camera/recorder could fall.
Do not subject the DVD video camera/ recorder to impact:
This DVD video camera/recorder is a precision machine: Take great care that you do not strike it against a hard object or allow it to fall.
Do not use the DVD video camera/recorder on a tripod in a place where it is subject to severe vibrations or impact.
No sand or dust!
Fine sand or dust entering the DVD video cam­era/recorder or AC adapter could cause it to malfunction.
No water or oil!
Water or oil entering the DVD video camera/ recorder or AC adapter could cause a short-cir­cuit or other malfunctions.
Heat on surface of product:
The surface of the DVD video camera/recorder will be slightly warm, but this does not indicate a fault. Be careful when touching the bottom of the DVD video camera/recorder, since it will be hot.
Be careful of ambient temperature:
Using the DVD video camera/recorder in a place where the temperature is over 40 °C or under 0 °C will not allow it to make normal recording/ playback.
When using the DVD video camera/recorder connected to PC, operate it at room temperature. If you use the DVD video camera/recorder where the temperature is high for an extended period of time, it will overheat and may not op­erate normally.
Do not leave the DVD video camera/recorder in a closed vehicle where the temperature is very high for a long time: This could cause malfunc­tions.
Do not point directly at the sun:
If direct sunlight strikes the lens or viewfinder, the DVD video camera/recorder could malfunc­tion or burn in CCD or viewfinder.
Do not leave the DVD video camera/recorder with the LCD screen exposed to direct sunlight: This could cause malfunctions.
19
Do not use the DVD video camera/ recorder near TV or radio:
This could cause noise to appear on the TV screen, or interference could enter radio broad­casts.
Do not use the DVD video camera/ recorder near strong radio waves or magnetism:
If the DVD video camera/recorder is used near strong radio waves or magnetism, such as near radio wave tower or electric appliances contain­ing motors, noise could enter video and audio that are being recorded. During playback of nor­mally recorded video and audio, noise could also enter the picture and sound. At worst the DVD video camera/recorder could malfunction.
Do not expose the DVD video camera/ recorder to soot or steam:
Heavy soot or steam could damage the DVD video camera/recorder case or cause malfunc­tions.
Do not use the DVD video camera/ recorder near corrosive gas:
Using it in a place where there is dense exhaust gas generated by gasoline and diesel engines, or corrosive gas such as hydrogen sulfide, could corrode the battery connecting terminals, which could result in loss of power.
Do not use the DVD video camera/ recorder near ultrasonic humidifier:
With some water in humidifier, calcium and oth­ers dissolved in water could scatter in the air, and white particles could adhere to the optical head of the DVD video camera/recorder, which could cause it to operate abnormally.
Be careful of moisture condensation:
When you move the DVD video camera/re­corder between places where the difference in temperatures is great, such as entering a lodge from a ski slope, or going out of a cooled room or vehicle, condensation (vapour in air warmed or cooled to water droplets) could occur on the lens and/or inside the DVD video camera/re­corder. If condensation occurs, do not open the cover of disc insertion block if possible. If con­densation occurs on the lens, wipe it off with a soft, dry cloth. Even if the external surface of the DVD video camera/recorder has dried, con­densation may remain inside. Turn the DVD video camera/recorder off and leave it in a dry place for at least 1-2 hours before using it again.
Do not use the DVD video camera/ recorder for a long uninterrupted period of time:
This DVD video camera/recorder is designed and produced for home-use recording and play­back. Do not use it for an extended time con­tinuously, e.g., as a surveillance camera/moni­tor.
If you use the DVD video camera/recorder for a long uninterrupted period of time, the tem­perature of DVD video camera/recorder may exceed the limit and the recording/playback operation could be slowed down. If this occurs, turn it off and wait for a while before using it again.
Be careful when removing the disc:
When the DVD video camera/recorder is used for a long period of time, the temperature of disc will be high: Wait for a few moments before re­moving the disc after the DVD video camera/ recorder is turned off.
Do not expose the DVD video camera/ recorder to insecticide:
Insecticide entering the DVD video camera/re­corder could dirty the optical head, and the DVD video camera/recorder may not operate nor­mally . Turn the DVD video camera/recorder off and cover it with vinyl sheet, etc. before using insecticide.
20
Do not turn the DVD video camera/ recorder off while the CHARGE/ACCESS indicator is blinking:
The CHARGE/ACCESS indicator is blinking to show that data is being written to disc, or being read from it. Do not do any of the following so as not to damage the data:
Disconnect AC adapter.
Plug or unplug PC connection cable.
Remove disc.
Subject disc to severe vibrations or impact.
If the DVD video camera/recorder is turned off while the CHARGE/ACCESS indicator is blink­ing, turn it on again with the disc cartridge or caddy loaded in it: Repair of the disc will be ex­ecuted.
CHARGE/ACCESS indicator
Note: The CHARGE/ACCESS indicator will blink in red while the disc is being accessed, and it will blink or light in red during charging.
Do not wipe the DVD video camera/ recorder case with benzene or thinner:
The coating of case could peel off or the case could deteriorate.
When using chemical cleaning cloth, follow the instructions.
Also read the instructions attached with optional accessories:
For optional accessories, follow the cautions and instruction manuals attached.
Use the AC adapter only in a well-ventilated, open space:
Do not use the AC adapter in a narrow space where flow of air is blocked, or where it is very near any object or inside any object: Ignoring this will increase heat inside the AC adapter which could cause fire, burns, electric shock or fault.
21
Cautions When Storing
Do not leave the DVD video camera/ recorder in a place where the tempera­ture is very high for a long period of time:
The temperature inside a closed vehicle or trunk becomes very high in the hot season. If you leave the DVD video camera/recorder in such a place, it could malfunction or the case could be dam­aged. Also, do not expose the DVD video cam­era/recorder to direct sunlight or place near a heater.
Do not store the DVD video camera/ recorder in a place where the humidity is high or in a dusty place:
Dust entering the DVD video camera/recorder could cause malfunctions. If the humidity is high, the lens could become mouldy, and the DVD video camera/recorder could be unusable. It is recommended that you put the DVD video camera/recorder with desiccant in a box when storing it in a closet, etc.
Suggestions and Restrictions
Make a trial recording:
Be sure to make a trial recording before an ac­tual take to make sure that recording is normal. Data that was not stored normally because of a defect in the DVD video camera/recorder can­not be restored.
It is recommended that you use DVD-RAM disc for trial recording, since a recording stor ed on it can be deleted.
Do not store the DVD video camera/ recorder in a place subject to strong magnetism or intense vibrations:
This could cause malfunctions.
Detach the battery from DVD video camera/recorder and store it in a cool place:
Leaving the battery attached or storing it at high temperature could shorten its life.
Copyright:
The data recorded on the disc in your DVD video camera/recorder through other digital/analog media or devices are protected by the copyright act and cannot be used without permission of the owner of copyright, except for personal enjoyment. Note that, even for personal enjoyment, recording is prohibited for some demonstrations, performances and exhibitions.
The recorded contents cannot be com­pensated for:
Hitachi will not compensate for any damages caused when a recording is not made normally or the recorded contents cannot be played back because of a defect in the DVD video camera/ recorder or disc. Also, Hitachi will not be r espon­sible for your recorded video and audio.
22
Discs
Available Discs
Usable discs and logos
DVD-RAM Ver. 2.1 (8 cm)
DVD-R [for General Ver. 2.0 (8 cm)]
This DVD video camera/recorder can use 8 cm DVD-RAM discs and 8 cm DVD-R discs for camcorder use. An uncovered disc cannot be used on this DVD video camera/recorder: It must be left in a cartridge or caddy for 8 cm disc.
Note: It is recommended that you use Hitachi Maxell discs because their compatibility with this DVD video camera/recorder has been conf irmed. Using a disc other than that made by Hitachi Maxell may not allow the DVD video camera/recorder to deliver optimum performance.
Information on DVD-R disc
For optimum recording on DVD-R disc, the DVD video camera/recorder writes control data to the disc in order to make adjustment when it is inserted and ejected accompanying recording. However, repeating this adjustment many times may cause the disc to become unrecordable: Do not insert or eject the disc accompanying recording more than 50 times.
Examples of discs that cannot be used on this DVD video camera/recorder:
Discs other than those with diameter of 8 cm, DVD­RAM (2.6 G) Ver. 1.0, DVD-R (3.9 G) Ver. 1.0, DVD­R (4.7 G) for Authoring Ver. 2.0, DVD-RW, DVD+RW, DVD+R, DVD-Video, DVD-ROM, CD­R, CD-RW, CD, CD-ROM, MO, MD, iD, LD, floppy disk, etc.
Initialising (formatting) DVD-RAM Discs
This DVD video camera/recorder can use DVD­RAM discs for AV formatted in accordance with the UDF 2.01 file system : No recording can be made on an unformatted disc. See Initialising DVD-RAM Disc on page 88 for the initialising procedure.
Finalising DVD-R Disc
Before using the 8 cm DVD-R disc recorded on this DVD video camera/recorder on a DVD player or
DVD recorder that is compatible with 8 cm DVD­R disc, the disc must be finalised on this DVD video camera/recorder. For the finalising procedure of 8 cm DVD-R disc, refer to Finalising Disc (p. 90).
When using DVD-R disc
If you finalise a recorded DVD-R disc, you can play it back on devices that are compatible with 8 cm DVD-R disc, or (on) computers* with DVD-ROM drive, DVD-R drive or DVD-RAM drive.
Although most DVD-R discs recorded on this DVD video camera/recorder are compatible for playback on other DVD players, playback of all DVD-R discs cannot be guaranteed.
Depending on the DVD player, DVD-R disc, or recording conditions, playback may not be possible. In such cases, use this DVD video camera/recorder to play back the DVD-R disc. * To play back the finalised DVD-R disc on PC,
you will need DVD playback software. The DVD playback software Power DVD XP is supplied with the optional DZ-WINPC3(W).
Handling Disc
If you use a DVD-RAM disc or DVD-R disc to which dirt or dust adheres, recognition of the disc may not be possible when it is inserted into this DVD video camera/recorder . Also, the DVD video camera/recorder may stop during recording or playback, or noise/disturbance of image may occur during playback. The same phenomenon may appear if condensation occurs because of abrupt change in temperature.
If an error message appears on the LCD screen while this DVD video camera/recorder is being used, turn off the DVD video camera/recorder once, and then turn it on again (P.101).
If an error message appears when the DVD video camera/recorder is being used in an environment where the temperature is high or it is used continuously, turn off the DVD video camera/ recorder , and after a while turn it on again.
If an error message appears when the DVD video camera/recorder is being used in an environment where the temperature is low, leave it powered for several minutes, turn it off, and then on again.
When the disc is used for an extended period of time, the temperature will increase because of the heat inside the DVD video camera/recorder: Be careful when removing the disc.
Normally, do not remove the disc from the car­tridge or caddy, and do not open the shutter of cartridge or caddy.
23
Note: Most generally available 8 cm discs can be removed from cartridges or caddies if they are for video cameras; However, before removing disc from cartridge or caddy, read the instruction sheet provided with the disc or consult the disc maker. Take care with the following when handling the removed disc:
Be sure not to touch disc surfaces.
Be careful not to drop the disc removed from
cartridge or caddy.
Be sure not to bend the disc.
Do not leave the disc outside the cartridge or
caddy.
Do not subject the disc to heat.
Do not write on disc with a ball-point pen or pen-
cil. (With one-side recordable disc, writing on the label surface is possible with a pen that does not scratch the surface. No writing of any kind is pos­sible on both-side recordable disc.)
Be sure not to wipe disc surfaces with thinner, water or anti-static agent. Use dry, soft cloth to lightly wipe off dust or dirt that adheres to the disc. Never use solvents to clean the disc.
Note: If the disc is removed from cartridge or caddy and the data stored by this DVD video camera/recorder is rewritten on devices other than this DVD video camera/recorder , recording or play­back may not be normal, or Disc Navigation may not operate normally, when the disc replaced in cartridge or caddy is used on this DVD video camera/recorder again.
Note: The cartridge or caddy protects the sur­faces of disc on which high-density recording is possible. Once removed from cartridge or caddy, the disc can be replaced in the cartridge or caddy and used with this DVD video camera/recorder, but be sure to observe the following:
Before replacing the disc in cartridge or caddy, make sure that disc surfaces are not scratched, and that no dirt or fingerprint adheres to them.
Do not record, edit or delete on the disc when scratches, dirt or fingerprints cannot be remov ed even if disc surface is cleaned.
When replacing the DVD-RAM disc in cartridge, insert it until a click is heard.
Be careful not to allow condensation.
To store disc cartridge or caddy, insert in plastic
case provided.
Do not place the disc cartridge or caddy in the fol­lowing places:
Where exposed to direct sunlight for a long
time.
Where the humidity is high, or in dusty place.
Where exposed to heat from heater, etc.
Where there may be condensation.
About Stored Data
If you handle or use the disc incorrectly, the re­corded data may be lost. Hitachi cannot be respon­sible for damages from loss of recorded data.
Removing and Replacing Disc from/in Cartridge or Caddy
The DVD-RAM disc used with this DVD video camera/recorder can be removed from the cartridge or caddy and used with DVD-RAM drives, DVD players and DVD recorders that are compatible with 8 cm DVD-RAM discs. The finalised DVD-R disc can also be removed from the cartridge or caddy and used with DVD players and DVD recorders that are compatible for 8 cm DVD-R discs. Refer to the disc in­struction sheet for details on how to remove disc from cartridge or caddy. Perform the following to remove the disc:
With disc packed in cartridge
Removing the disc
Release the lock pins of cartridge. The two lock pins
1
are at the bottom left corners of sides A and B.
Lock pins
While pushing the release levers from both sides
2
inward, hold the centre of disc tray and pull it out to the front.
Use a fine tipped pen to slide the lock pin in the direction of arrow q, and then turn it in the di­rection of arrow w to release it.
24
With disc packed in caddy
Removing the disc
Insert your finger
1
into the hole in the centre of disc and lightly lift it up (in the direction of ar­row q).
Hold the disc at its edge and centre hole, and
2
remove it in the direction of arrow w.
Replacing the disc in caddy
Hold the disc at its
1
edge and centre hole with the recording surface down.
Insert the disc under
2
the claws at the disc hold portion from
claws
the direction of ar­row e. Gently push the disc in until it is com­pletely stored.
Replacing the disc in cartridge
Insert the disc into cartridge.
1
S
I
D
E
A
Indication of side
mark facing up
Write-protect tabs
The cartridge has write-protect tabs to prevent overwriting on recorded data. Make sure that the write-protect tab is set to the side where recording is possible.
PROTECT A
Tab for side B
Recording possible
Recording not possible
Note: When recording special events, be sure to use a new disc which has never been removed from cartridge or caddy. Note: Writing similar to recording is performed even with simple editing or deletion. Make sure that editing or deletion has been securely performed with the disc removed from cartridge or caddy. Note: If there are dust, scr atches or dirt on the sur ­face of disc, block noise may appear in image or sound may be interrupted. Take great care when handling discs so that no dirt or fingerprints adheres to them. Note: This DVD video camera/recorder has a function that allows recording, avoiding portions of the disc with dust, scratches or dirt [The DVD video camera/recorder sets to pause ( and automatically restarts recording ( will interrupt recording for several seconds to sev­eral minutes, and multiple thumbnails will be cre­ated (see p. 67) in one recording as shown in the figure. In this case, the recordable time will de­crease.
Tab for side A
PROTECT A
PROTECT A
) status
)]. This
Fit in the disc tray until a click is heard.
2
25
Disc Storage Capacity
The movies and stills that can be recorded on an 8 cm disc used in this DVD video camera/recorder ar e as follows: Prepare discs according to the scheduled recording time and conditions.
DVD-RAM disc storage capacity Recordable time of movies on
DVD-RAM disc
Movie quality mode
1
XTRA (VBR*
)
FINE (MPEG2,
approx. 6 Mbps)
STD (MPEG2,
approx. 3 Mbps)
*
When recording only movies (containing video and audio)
*
The total recordable time is half on each side of disc.
1
*
VBR stands for Variable Bit Rate.
Recordable time
approx. 36-120
minutes(varies depend-
ing on the subject)
approx. 60minutes
approx. 120 minutes
Number of recordable stills on DVD-RAM disc
Up to 999 stills per side (when recording only stills)
If the disc still has free space after recording 999 stills, movie can be recorded.
Recordable time on DVD-R disc
Movie quality mode
FINE (MPEG2,
approx. 6 Mbps)
STD (MPEG2,
approx. 3 Mbps)
When using DVD-R disc, no still image can be recorded on this DVD video camera/recorder.
When using DVD-R disc, the recording quality mode first used for recording on that disc is a fixed mode: It cannot be changed on that disc.
Recordable time
approx. 30 minutes/side
approx. 60 minutes/side
26
Setups
This section explains preparations for recording - setting up the D VD video camera/recorder and battery pack.
Setting Up the DVD video camera/recorder
Holding DVD video camera/recorder
Insert your right hand from the bottom of DVD video camera/recorder up to the base of your thumb.
Put your hand in a po­sition where you can easily operate the REC button and the Zoom lever. Adjust the length of hand strap so that the DVD video camera/re­corder is stable when you press the REC but­ton with your thumb.
Note: Do not adjust the hand strap while holding the DVD video camera/recorder: Doing this could cause the DVD video camera/recorder to f all and be damaged.
Attaching Shoulder Strap
Caution: Do not lift the DVD video camera/re-
corder by holding the viewfinder or LCD moni­tor: If the viewfinder or LCD monitor comes off, the DVD video camera/recorder will fall.
Be sure to pass through the 2 slots.
Pass the shoulder strap through the shoulder strap attachments.
Be sure to pass through the 2 slots.
27
Attaching Lens Cap
Pass the provided string through the hole in the lens cap and attach it to the hand strap of DVD video camera/recorder.
Use the string to attach the cap to the DVD video
1
camera/recorder.
Push the both sides of cap inward and attach it
2
over the lens.
Note: Always keep the lens cap on when not us­ing the DVD video camera/recorder , to protect the lens. Note: When recording, attach the lens cap to the hand strap by hooking the tab inside the cap onto strap for comfortable shooting.
Attaching Ferrite Cores
Although the cores are not attached in the illustrations of the cables in text, be sure to attach the ferrite core (provided) to the S-VIDEO cable (for DZ-MV238E(A U) and DZ-MV208E(A U)) using the follo wing procedure (the ferrite core was attached to the AV input/output cable at the factory): (Ferrite cores reduce radio interference with your radio and TV.)
Open the cover of ferrite core.
1
Attach the core to the S-VIDEO cable at a posi-
2
tion approximately 5 cm from its end.
Close the cover of core, taking care that it does
3
not catch the S-VIDEO cable.
Note: If you use an external microphone when recording, attach the ferrite core (pro vided) to the cable at a position approximately 5 cm from its end: Wind the microphone cable round the core once in the same way as for the S-VIDEO cable. Using external microphone in modes other than camera recording is not recommended.
28
5cm
Inserting Batteries into Remote Control
Insert two AA (LR06) batteries (provided) into the remote control to power it.
Open the battery compartment lid on the back
1
of remote control and insert the batteries.
Close the lid.
2
Note: If the batteries are discharged, pressing any button on remote control cannot operate the D VD video camera/recorder: Replace the batteries.
Using Remote Control
Point the remote control to the infrared receiver on the DVD video camera/recorder. The remote con­trollable distance is up to 5 m.
10
15
10
15
Approx. 5 m
Note: When using the remote control, make sure that the infrared receiver on DVD video camera/ recorder is not exposed to direct sunlight or any intense light. If the infrared receiver is subject to light stronger than the infrared light from remote control, the DVD video camera/recorder cannot be operated by remote control. Note: If there is an obstacle between the remote control and infrared receiver on DVD video cam­era/recorder , remote control may not be possible. Note: The DVD video camera/recorder uses the VCR2 remote control code of Hitachi VCRs. If you use a Hitachi VCR, etc. with remote control code set to “VCR2”, a VCR placed near the DVD video camera/recorder will also be operated by the remote control: T o pre vent this, change the remote control code of the VCR.
29
Setting Up the Battery
The DZ-BP14(R) battery pack provided with this DVD video camer a/recor der has not been charged at purchase time: Charge it before using the DVD video camera/recorder.
Note: Be sure to use the specified battery DZ-BP14(R)/DZ-BP16 (sold separately) or DZ-BP28 (sold sepa­rately) for the DVD video camera/recorder: Using other batteries could cause the DVD video camera/ recorder to malfunction, or result in fire.
Attaching Battery to DVD video camera/recorder
Raise the view-
1
finder.
Align the top of bat-
2
tery with the top surface of battery at­tachment platform of DVD video cam­era/recorder.
Removing Battery
After using the DVD video camera/recorder, remove the battery from it.
Set the power switch
1
to “POWER OFF” to turn the DVD video camera/recorder off.
Raise the view-
2
finder.
While fitting the battery onto the DVD video
3
camera/recorder , slide it downward until a click is heard.
Note: Make sure that the battery is securely at­tached: Incomplete attachment could cause the battery to fall, resulting in damage.
While holding the BATTERY EJECT button
3
above the battery attachment platform, sllide the battery upward to remove it.
Note: For safety, be sure to turn the DVD video camera/recorder off before attaching or remov­ing the battery. Note: If the battery remains attached, minute level current will flow even if the DVD video cam­era/recorder is off, and the battery will discharge.
30
Loading...
+ 89 hidden pages