Hitachi DV-DS163E, DV-DS253E User Manual

EnglishFrançaisEspañolItaliano

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.

Caution: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus.

Caution: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

Caution: Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings should be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a builtin installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

CAUTION: This product employs a Laser System.

To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference. Should the unit require maintenance, contact an authorized service center.

Use of controls, adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit;

That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.

Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

SERIAL NUMBER:

You can find the serial number on the back of the unit. This number is unique to this unit and not available to others. You should record requested information here and retain this guide as a permanent record of your purchase.

Model No. ______________________________ Serial No. ______________________________

Disposal of your old appliance

1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/ 96/EC.

2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.

3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.

4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.

WARNING: Do not install this equipment in a confined space such as a bookcase or similar unit.

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Symbol Used in this Manual . . . . . . . . . . . . . . . . . 5

Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Recordable and Playable Discs . . . . . . . . . . . . . . 6

Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

About the internal hard disk drive . . . . . . . . . . . . . 8

Remote Control Operation . . . . . . . . . . . . . . . . . . 8

Availability of copying or moving feature . . . . . . .8

Card useable on this unit . . . . . . . . . . . . . . . . . . . 9

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . 11

Hookup and Settings . . . . . . . . . . . . . . . . . . .12

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Connecting to the Aerial . . . . . . . . . . . . . . . . . . . 12

Connections to Your TV . . . . . . . . . . . . . . . . . . . 13

HDMI connection . . . . . . . . . . . . . . . . . . . . . . . . 14

Connecting to an Amplifier . . . . . . . . . . . . . . . . . 15

Accessory Audio/Video Connections . . . . . . . . . 16

Using the Home Menu . . . . . . . . . . . . . . . . . . . . 18

Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

General Settings . . . . . . . . . . . . . . . . . . . . . . . . . 18

Auto Programming . . . . . . . . . . . . . . . . . . . . 18

Program Edit . . . . . . . . . . . . . . . . . . . . . . . . . 19

AV1 Decoder . . . . . . . . . . . . . . . . . . . . . . . . . 19

Auto Clock Set . . . . . . . . . . . . . . . . . . . . . . . 20

Manual Clock Set . . . . . . . . . . . . . . . . . . . . .20

TV Aspect (Standard and Wide) . . . . . . . . . . 20

Display Mode . . . . . . . . . . . . . . . . . . . . . . . . 20

AV2 Connection . . . . . . . . . . . . . . . . . . . . . . 20

Power Save Mode . . . . . . . . . . . . . . . . . . . . . 20

Initialization (HDD Format) . . . . . . . . . . . . . . 21

Language Settings . . . . . . . . . . . . . . . . . . . . . . . 21

Display Menu . . . . . . . . . . . . . . . . . . . . . . . . 21

Disc Menu/Audio/Subtitle . . . . . . . . . . . . . . .21

Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . 21

Dolby Digital / DTS / MPEG . . . . . . . . . . . . . 22

Sampling Frequency . . . . . . . . . . . . . . . . . . . 22

DRC (Dynamic Range Control) . . . . . . . . . . . 22

Vocal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Lock (Parental Control) Settings . . . . . . . . . . . . . 22

Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Set Password . . . . . . . . . . . . . . . . . . . . . . . . 22

Area Code . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Registration Code . . . . . . . . . . . . . . . 23

DivX

Recording Settings . . . . . . . . . . . . . . . . . . . . . . . 23

Record Mode Set . . . . . . . . . . . . . . . . . . . . .23

Record Aspect . . . . . . . . . . . . . . . . . . . . . . . 23

DV Recording Audio . . . . . . . . . . . . . . . . . . . 23

TV Recording Audio . . . . . . . . . . . . . . . . . . . 23

Auto Chapter . . . . . . . . . . . . . . . . . . . . . . . . . 24

AV2 Recording . . . . . . . . . . . . . . . . . . . . . . . 24

Disc Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Disc Format . . . . . . . . . . . . . . . . . . . . . . . . . .24

Finalize . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Disc Label . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Disc Protect . . . . . . . . . . . . . . . . . . . . . . . . . .25

PBC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

General Explanation of On-Screen Display . . . .26

General Playback Features . . . . . . . . . . . . . .27

If a menu screen is displayed . . . . . . . . . . . .29

Moving to another TITLE . . . . . . . . . . . . . . . .29

Time Search . . . . . . . . . . . . . . . . . . . . . . . . .29

Marker Search . . . . . . . . . . . . . . . . . . . . . . . .29

Camera Angle . . . . . . . . . . . . . . . . . . . . . . . .29

3D Surround . . . . . . . . . . . . . . . . . . . . . . . . .30

Last Condition Memory . . . . . . . . . . . . . . . . .30

Playing a DivX

Notice for displaying the DivX

Movie List menu options . . . . . . . . . . . . . . . .31

Playing an Audio CD or MP3/WMA file . . . . . . . .32

Audio CD and Music menu options . . . . . . . .32

Random . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Program Playback with Audio CD/MP3/WMA . . .33

Program List menu options . . . . . . . . . . . . . .33

Repeat Programmed Tracks . . . . . . . . . . . . .33

Erasing a Track from the Program List . . . . .33

Changing Track Order in the Program List . .33

Save Your Program List (HDD) . . . . . . . . . . .33

Viewing a JPEG File . . . . . . . . . . . . . . . . . . . . . .34

Photo List menu options . . . . . . . . . . . . . . . .34

Skip Images . . . . . . . . . . . . . . . . . . . . . . . . . .35

Rotate Images . . . . . . . . . . . . . . . . . . . . . . . .35

View Slide Shows . . . . . . . . . . . . . . . . . . . . .35

Editing a MP3/WMA, JPEG, DivX

Erasing a file(s)/folder(s) . . . . . . . . . . . . . . . .36

Naming a file . . . . . . . . . . . . . . . . . . . . . . . . .36

Copying a file(s) to another media or folder .37

Moving a file(s) . . . . . . . . . . . . . . . . . . . . . . .37

Movie File . . . . . . . . . . . . . . . . .30

subtitle . . . . .30

file . . . . . . . .36

Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

About DVD recording . . . . . . . . . . . . . . . . . . . . .38

About HDD recording . . . . . . . . . . . . . . . . . . . . .38

Time Shift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Basic Recording from a TV . . . . . . . . . . . . . . . . .40

Changing TV Audio Channel . . . . . . . . . . . . . . .40

Instant Timer Recording . . . . . . . . . . . . . . . . . . .41

Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . .41

HOWVIEW

Checking Timer Recording Details . . . . . . . . . . .44

Recording from an External Input . . . . . . . . . . . .44

Recording from DV Input . . . . . . . . . . . . . . . . . .45

Simultaneous recording and playback . . . . . . . .46

System . . . . . . . . . . . . . . . . . . . . . .43

English

Title List and Editing . . . . . . . . . . . . . . . . . . .47

Title List and Chapter List Menu Overview . . . . . 47

Original and Playlist Editing (VR Mode) . . . . . . . 49

Adding Chapter Markers . . . . . . . . . . . . . . . . . . . 49

Changing Title Thumbnails . . . . . . . . . . . . . . . . . 49

Making a New Playlist . . . . . . . . . . . . . . . . . . . . 50

Adding Title/Chapters to the Playlist . . . . . . . . . . 50

Deleting an Original or Playlist Title/Chapter . . . 51

Deleting a Part . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Naming a Title . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Sort . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Undoing/Redoing . . . . . . . . . . . . . . . . . . . . . . . . 53

Combining Titles . . . . . . . . . . . . . . . . . . . . . . . . . 53

Divide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Combining Chapters . . . . . . . . . . . . . . . . . . . . . . 54

Moving a Playlist Chapter . . . . . . . . . . . . . . . . . . 55

Hide a Chapter/Title . . . . . . . . . . . . . . . . . . . . . . 55

Protect a Title . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Full Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Before Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . 56

What is ‘CPRM’? . . . . . . . . . . . . . . . . . . . . . . . . 56

Fast copying (Maximum 12×) . . . . . . . . . . . . . . . 56

Dubbing from HDD to DVD . . . . . . . . . . . . . . . . .57

Dubbing from DVD to HDD . . . . . . . . . . . . . . . . .57

One Touch Copy (HDD to DVD) . . . . . . . . . . . . . 58

One Touch Copy (DVD to HDD) . . . . . . . . . . . . . 58

Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Additional Information . . . . . . . . . . . . . . . . . . . . . 59

Overwriting Recording . . . . . . . . . . . . . . . . . 59

Display on other Recorders or Players . . . . .59

Playing on other Players (Finalized) . . . . . . . 59

Language Codes . . . . . . . . . . . . . . . . . . . . . . . . 60

Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Controlling TV with Remote Control . . . . . . . . . . 61

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . 64

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Introduction

To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference.

This manual provides information on the operation and maintenance of your recorder. Should the unit require service, contact an authorized service location.

Symbol Used in this Manual

The lightning flash symbol alerts you to the

presence of dangerous voltage within the

product enclosure that may constitute a risk of

electric shock.

The exclamation point alerts you to the

presence of important operating and

maintenance / servicing instructions.

Indicates hazards likely to cause harm to the

unit itself or other material damage.

Note:

Indicates special notes and operating features.

Tip:

Indicates tips and hints for making the task easier.

About the Symbol Display

“ ” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific DVD video disc.

English

Notes on Discs

Handling Discs

Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc.

Storing Discs

After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight.

Cleaning Discs

Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out.

A section whose title has one of the following symbols are applicable only to the disc represented by the symbol.

Titles recorded on the HDD

HDD

DVD ALL

RAM

-RWVR

-RWVideo

-R

+RW

DVD

VCD

ACD

DivX

MP3

WMA

JPEG

All DVD discs listed below.

DVD-RAM disc

DVD-RW with VR recording mode

DVD-RW with Video recording mode

DVD-R disc

DVD+RW disc

DVD+R disc

DVD-Video disc

Video CDs

Audio CDs

files

DivX

MP3 files

WMA files

JPEG files

Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records.

Moisture Condensation

Never operate this product immediately after moving it from a cold location to a warm location. Leave it for two or three hours without operating it. If you use this product in such a situation, it may damage discs and internal parts.

Accessories

Check for the supplied accessories below.

• Video Cable • Remote Control

• Audio Cable • SCART Cable

• RF Cable for TV • Instruction Manual

• Batteries for Remote Control (AAA Size)

Dispose of batteries according to local environmental regulations. Do not put them in the household rubbish.

Recordable and Playable Discs

DVD-RAM

• DVD-RAM discs can be formatted for VR mode recording.

• These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the same Disc.

• Playable on DVD-RAM compatible players.

• Recordings can be extensively edited.

• Only DVD-RAM standard Version 2.0, 2.1 and 2.2 discs can be used in this unit.

• You cannot use the cartridge-type DVD-RAM disc in this unit.

DVD-RW

• DVD-RW discs can be formatted for VR mode recording or Video mode recording.

• These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the same Disc.

[VR mode]

• Recordings can be extensively edited

• Playable only on VR mode compatible players (after finalization)

[Video mode]

• Playable on regular DVD players (after finalization)

• Limited editing features

DVD-R

• These Discs can be recorded only once. After you finalize a DVD-R, you cannot record on it or edit it.

• DVD-R discs can be only formatted to Video mode.

• Playable on regular DVD players (after finalization).

• Limited editing features

DVD+RW

• These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the same Disc.

• Playable on DVD+RW compatible players (automatically finalization)

• The edited contents are playable on DVD+RW compatible players only after finalization

• Recordings can be edited the title/chapter

DVD+R

• These Discs can be recorded only once. After you finalize a DVD+R, you cannot record on it or edit it any more.

• Playable on DVD+R compatible players (after finalization)

• Any edited contents are not be compatible on DVD+R compatible players. (Hide, chapter combine, added chapter mark, etc.)

• Limited title/chapter editing features.

DVD+R DL

• These Discs can be recorded only once. After you finalize a DVD+R DL, you cannot record on it or edit it any more.

• Storage space is nearly doubled with double layer DVD+R media, allowing consumers to record up to

8.5GB of video on a single DVD+R DL disc.

• Playable on DVD+R compatible players (after finalization)

• Any edited contents are not be compatible on DVD+R DL compatible players. (Hide, chapter combine, added chapter mark, etc.)

• Limited title/chapter editing features.

The recordable DVD discs (Example)

DVD-RAM DVD-RW DVD-R DVD+RW DVD+R DVD+R (DL)

Maxell (2×, 3×, 5×) Maxell (1×, 2×, 4×) Maxell (4×, 8×, 16×) Maxell (2.4×, 4×) Maxell (4×, 8×, 16×) Maxell (2.4×)

Mitsubishi (2×, 3×) V ictor (1×, 4×) Verbatim (4×, 8×) SONY (4×) Mitsubishi (4×, 8×, 16×) Mitsubishi (2.4×, 8×)

Fujifilm (2×, 3×) Verbatim (4×) That’s (8×, 16×) Mitsubishi (4×) Ricoh (2×, 4×, 8×, 16×) —

— Mitsubishi (2×, 4×) — Ricoh (2.4×, 4×) Verbatim (8×) —

———— — —

Note:

If a DVD-RW/DVD+RW disc is recorded using a personal computer or other DVD recorder, you cannot format the disc using this recorder. So if you want to use the disc on this recorder, you must format the disc using the original recorder. The above discs were checked for usability in 2006. Disc specifications may be changed without notice.

Playable Discs

DVD (8 cm / 12 cm disc)

• Discs such as movies that can be purchased or rented

Video CD (VCD) (8 cm / 12 cm disc)

• VIDEO CDs or CD-Rs/CD-RWs in VIDEO CD/Super VIDEO CD format

Audio CD (8 cm / 12 cm disc)

• Music CDs or CD-Rs/CD-RWs in music CD format that can be purchased

English

CD-R/CD-RW (8 cm / 12 cm disc)

• CD-R/CD-RW discs that contain audio titles, DivX

, MP3, WMA, or JPEG files.

Notes:

• Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit.

• Images taken with a Hitachi DVD video camera on 8 cm DVD-R discs that have not been finalized can be played on the unit. Additional recording and finalization cannot be performed.

• Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.

• Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing so may result in malfunctions.

• Depending on the recording software & the finalization, some recorded discs (CD-R/RW or DVD±R/RW) may not be playable.

• DVD-R/RW, DVD+R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the Recorder’s lens.

• If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.)

Notes on DVDs and Video CDs

Some playback operations of DVDs and Video CDs may be intentionally fixed by software manufacturers. As this unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some playback features of the unit may not be available or other functions may be added. Refer also to the instructions supplied with the DVDs and Video CDs. Some DVDs made for business purposes may not be played on the unit.

About the internal hard disk



drive

The internal hard disk drive (HDD) is a fragile piece of equipment. Please use the recorder following the guidelines below to protect against possible HDD failure.

We recommend that you back up your important recordings onto DVD discs in order to protect against accidental loss.

• Do not move the recorder while it is on.

• Install and use the recorder on a stable, level surface.

• Do not block the rear vent/cooling fan.

• Do not use the recorder in excessively hot or humid places, or in places that may be subject to sudden changes in temperature. Sudden changes in temperature can cause condensation to form inside the recorder. This can be a cause of HDD failure.

• While the recorder is switched on, do not unplug from the wall socket or switch the electricity off from the breaker switch.

• Do not move the recorder immediately after switching it off. If you need to move the recorder, please follow the steps below:

1. After the message POWER OFF is shown in

the display, wait at least two minutes.

2. Unplug from the wall socket.

3. Move the recorder.

• If there’s a power failure while the recorder is on there is a chance that some data on the HDD will be lost.

• The HDD is very delicate. If used improperly or in an unsuitable environment, it is possible that the HDD will fail after a few years of use. Signs of problems include playback unexpectedly freezing and noticeable block noise (mosaic) in the picture. However, sometimes there will be no warning signs of HDD failure. If the HDD fails, no playback of recorded material will be possible. In this case it will be necessary to replace the HDD unit.

Exemption of liability concerning compensation of recorded contents

If the recorder fails to record or play back because of a fault, Hitachi will not accept any responsibility for compensation for HDD contents (recorded program data, etc.) or loss of them, or any direct or indirect damage. This also applies if you repair the recorder yourself (including repair of any components other than HDD).

Remote Control Operation

Point the Remote Control at the remote sensor and press the buttons.

Remote Control Battery Installation

Remove the battery cover on the rear of the Remote Control, and insert two R03 (size AAA) batteries with and matched correctly.

Caution

Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.).

Caution

Do not block vent holes:

• If the vent holes on this recorder are blocked, heat will accumulate inside, which could cause a fire. Also touching the hot recorder could cause burns. Do not push the recorder into an ill-ventilated, narrow space, such as a bookcase or closet, or cover it with table cloth, or place it on a carpet or rug.

Caution

Do not place any heavy object on this recorder:

• Do not place any heavy object or TV on it: The object may fall, which could cause an injury.

Availability of copying or moving feature

From To MP3/WMA JPEG DivX Audio CD Video CD Title

HDD DISC No No No No No Yes

HDD Memory Card No Yes No No No No DISC HDD Yes Yes Yes No No Yes DISC Memory Card No Yes No No No No

Memory Card DISC No No No No No No Memory Card HDD Yes Yes No No No No

Card useable on this unit

• Compact Flash Card (CF)

• Micro Drive (MD), ST1 MD

• Secure Digital Card (SD), Mini SD

• Multi Media Card (MMC), MMC Plus, RS MMC, MMC Mobile

• xD-Picture Card (xD)

• Compatible with: FAT 12, FAT 16, or FAT 32

• Only use the memory cards recommended above.

Regarding Write Protect

For cards that have a write protect switch, if the switch is on it will not be possible to write, erase or format the card.

Inserting/Removing the Memory Card

Slot 1 Slot 2

English

Insert CF, MD, or ST1 MD

Inserting the card

Insert straight-in until it fits into place.

Removing the card

Slot 1: Withdraw the card carefully. Slot 2: Press on the center of the card then withdraw the card carefully.

Insert SD, Mini SD, MMC, MMC Plus, RS MMC, MMC Mobile, or xD card

Notes:

• Keep the memory card out of reach of children. If swallowed, seek medical advice immediately.

• A memory card may not be used for this recorder.

• Do not extract the memory card in operating

(play, copy, move, etc.).

Using Memory Card

1. Insert a memory card.

2. Press HOME on the remote control.

3. Select [MUSIC] or [PHOTO] option.

4. Select [Memory Card 1] or [Memory Card 2] then

press ENTER.

Details for the options are on page 18.

Front Panel



W X

POWER button

Switches the recorder ON or OFF. (As to the indication of the Operate switch, “ I ” shows ON and “ ” shows electrical power stand-by.)

(OPEN/CLOSE)

Opens or closes the disc tray.

HDD/DVD

Set the recorder’s mode to HDD or DVD.

(STOP)

Stops playback or recording.

/ (PLAY/PAUSE)

Starts playback. Pause playback or recording temporarily, press again to exit pause mode.

(REC)

Starts recording. Press repeatedly to set the recording time.

PROG. (

Scans up or down through memorized channels.

RESO LUTION (page 14)

Sets the output resolution for HDMI and COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks. – HDMI: 576i, 576p, 720p, 1080i – COMPONENT: 576i, 576p

Disc Tray

Insert a disc here.

/ S)

Display window

Shows the current status of the recorder.

T/S: Indicates the timeshifting mode. REC: The recorder is recording. HDD: The recorder is HDD mode.

DVD: The recorder is DVD mode. HDD TV: Indicates when the recorder is in TV tuner

mode.

recording or a timer recording is programmed.

time, elapsed time, title number, chapter/track number, channel, etc.

Remote Sensor

Point the recorder remote control here.

MEMORY CARD Slot 1

Insert a memory card (CF/MD/ST1 MD).

MEMORY CARD Slot 2 (page 9, 32, 34)

Insert a memory card (SD/Mini SD/MMC/ MMC Plus/RS MMC/MMC Mobile/xD).

DV IN (page 17, 45)

Connect the DV output of a digital camcorder.

INPUT 4 (S-VIDEO IN)

Connect the S-Video output of an external source (TV/ Monitor, VCR, Camcorder, etc.).

INPUT4 (VIDEO IN/AUDIO IN (Left/Right))

Connect the audio/video output of an external source (Audio system, TV/ Monitor, VCR, Camcorder, etc.).

DVD: The recorder is dubbing.

: Indicates when the recorder is in timer

: Indicates clock, total playing

Note:

The (OPEN/CLOSE) button will not operate with this recorder turned off. After turning the recorder on to display the clock in the Display window, press the

(OPEN/CLOSE) button.

Remote Control



0-9 numerical buttons: (page 27,

52) Selects numbered options in a

menu.

/ X / S / T (left/right/up/down):

Selects an option in the menu.

/ T (up/down): Scans up or

down through memorized channels.

A-B: (page 28) Repeat sequence.

ANGLE: (page 29) Selects a DVD

camera angle, if available.

AUDIO: (page 28) Selects an audio language (DVD) or TV audio channel (CD).

CHP ADD: (page 49) Inserts a chapter marker when playing/ recording.

CLEAR: (page 29, 36) Removes a track number on the Program List or a mark on the Marker Search menu.

DISC MENU/LIST: (page 28, 47)

Accesses menu on a DVD disc. Switches between Title List-Original and Title List-Playlist menu.

DISPLAY: (page 26, 47) Accesses On-Screen Display.

DUBBING: (page 58) Copies DVD to HDD (or HDD to DVD).

DVD: (page 18) Select the Recorder’s function mode to DVD.

ENTER

• Acknowledges menu selection.

• Displays information while viewing a TV program.

HDD: (page 18) Select the Recorder’s function mode to HDD.

HOME: (page 18) Accesses or removes the HOME menu.

INPUT: (page 19, 45) Changes the input to use for recording (Tuner, AV1-4 or DV IN).

MANUAL SKIP: (page 28)

Pressing this button during playback will skip to a scene 15 seconds forward.

MARKER: (page 29, 39) Marks any point during playback.

(OPEN/CLOSE): (page 27)

Opens and closes the disc tray. Operate this button only after turning the recorder on.

(PAUSE/STEP): (page 27)

Pause playback or recording temporarily, press again to exit pause mode.

(PLAY): (page 27) Starts

playback.

/I POWER: (page 27) Switches

the recorder ON or OFF.

RANDOM: (page 32) Plays tracks in random order.

(REC): (page 38, 39, 40) Starts

recording. Press repeatedly to set the recording time.

REC MODE: (page 38, 40) Selects the recording mode (XP, SP, LP or EP).

REPEAT: (page 28) Repeat chapter, track, title, all.

RESOLUTION: (page 14) Sets the output resolution for HDMI.

RETURN ( ) (page 19, 29)

• Removes the menu.

• Display the menu of a video CD with PBC.

/ (SCAN): (page 27, 39)

Search backward or forward.

SEARCH: (page 29, 39) Displays Marker Search menu.

SETUP: (page 18, 20) Accesses or removes the Setup menu.

HOWVIEW: (page 43) To display

the program menu for S System programming.

/ (SKIP): (page 27, 35)

Go to next chapter or track. Returns to beginning of current chapter or track or go to previous chapter or track.

(STOP): (page 27) Stops

playback or recording.

SUBTITLE: (page 28) Selects a subtitle language.

THUMBNAIL: (page 49) Selects a thumbnail picture for the current title and chapter for use in the Original and Playlist menu.

TIMER REC: (page 41, 44)

Displays Timer Record menu.

TIMESHIFT: (page 39) Activates pause live TV/playback (timeshift) for a live TV program.

TITLE MENU: (page 28, 29)

Displays the disc’s Title menu, if available.

TV/DVD: (page 40) To view channels selected by the recorder tuner or by the TV tuner.

TV Control Buttons (page 61)

• POWER: Turns the TV on or off.

• INPUT: Selects the TV’s source.

• PROG +/–: Selects TV’s channel.

• VOL +/–: Adjusts TV’s volume.

• MUTE: Temporarily turns TV sound OFF, press again to restore.

ZOOM: (page 27) Enlarges DVD video image.

HOWVIEW

English

Hookup and Settings

Rear Panel

AERIAL

Connect the aerial to this terminal.

HDMI Connector (Type A)

HDMI output providing a high quality interface for digital audio and video (page 14).

EURO AV 2 DECODER

Connect the audio/video output of an external source (Pay-TV decoder, Set Top Box, VCR, etc.).

AV 3 (VIDEO) OUT

Connect to a TV with video inputs.

AV 3 (VIDEO) IN

Connect the video output of an external source (Audio system, TV/Monitor, VCR, Camcorder).

AV 3 (AUDIO) IN (Left/Right)

Connect the audio output of an external source (Audio system, TV/Monitor, VCR, Camcorder).

AV 3 (AUDIO) OUT (Left/Right)

Connect to a TV with audio inputs.

COAXIAL (Digital audio out jack)

Connect to digital (coaxial) audio equipment.

Connecting to the Aerial

Remove the aerial cable plug from your TV set and insert it into the aerial socket at the back of the recorder. Plug one end of the aerial cable into the TV socket on the recorder and the other end into the aerial input socket on your TV set.

RF coaxial connection

Connect the RF. OUT jack on the recorder to the aerial input jack on the TV using the 75-ohm Coaxial Cable supplied (R). The RF. OUT jack passes the signal through from the AERIAL jack.

OPTICAL (Digital audio out jack)

Connect to digital (optical) audio equipment.

Cooling fan

AC Power Cord

Plug into the power source.

RF. OUT

Passes the signal from the AERIAL to your TV/ monitor

EURO AV 1 AUDIO/VIDEO

Connect to a TV with SCART jack.

VIDEO OUT SELECT Switch

Select either COMPONENT VIDEO OUT or RGB signal of EURO AV1 AUDIO/VIDEO terminal depending on how you connect the recorder to the TV.

COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr)

Connect to a TV with Y Pb Pr inputs.

Aerial

Rear of TV

Rear of the recorder

Connections to Your TV

• Make one of the following connections, depending on the capabilities of your existing equipment.

• When using the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks, set the VIDEO OUT SELECT switch to COMPONENT. When using the SCART jack, set the VIDEO OUT SELECT switch to RGB.

Tips:

• Depending on your TV and other equipment you wish to connect, there are various ways you could connect the recorder. Use only one of the connections described below.

• Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections.

Caution

• Make sure the recorder is connected directly to the TV. Tune the TV to the correct video input channel.

• Do not connect the recorder’s AUDIO OUT jack to the phono in jack (record deck) of your audio system.

• Do not connect your recorder via your VCR. The DVD image could be distorted by the copy protection system.

Rear of TV

SCART connection

Connect the EURO AV1 AUDIO/VIDEO scart jack on the recorder to the corresponding in jacks on the TV using the scart cable (T).

Video connection

Connect the VIDEO OUT jack on the recorder to the video in jack on the TV using the video cable (V).

Component Video connection

Connect the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the recorder to the corresponding input jacks on the TV using an Y Pb Pr cable (C).

Progressive Scan connection

If your television is a high-definition or “digital ready” television, you may take advantage of the recorder’s progressive scan output for the highest video resolution possible. If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the recorder.

Set the resolution to 576p using RESOLUTION button for progressive signal.

Note:

Progressive scan does not work with the analog video connections (yellow VIDEO OUT jack).

Caution

If the resolution is set to 720p or 1080i, the VIDEO OUT, S-VIDEO OUT and COMPONENT VIDEO OUT connections are not available.

English

Rear of the recorder

Audio (Left/Right) Connection

Connect the left and right AUDIO OUT jacks of the recorder to the audio left and right IN jacks on the TV using the audio cables (A). Do not connect the recorder’s AUDIO OUT jack to the phono in jack (record deck) of your audio system.

HDMI connection

If you have a HDMI TV or monitor, you can connect it to this recorder using a HDMI cable. Be sure to use an HDMI cable with HDMI logo ().

1. Connect the HDMI jack on the recorder to the HDMI

jack on a HDMI compatible TV or monitor (H).

2. Set the TV’s source to HDMI (refer to TV’s Owner’s

manual).

Tip:

When you use HDMI connection, you can change the resolution (576i, 576p, 720p, or 1080i) for the HDMI output using RESOLUTION button. (See pages 10, 11) Press the RESOLUTION button once to show the current setting in the display window on the front of the unit. Pressing the RESOLUTION button again within about 2 seconds switches the resolution setting in the following order: 576i→576p→720p→1080i.

• When the resolution is set to 720p or 1080i, the TV Aspect setting on the Setup menu is fixed at “16:9”.

Caution

• Some TVs with HDMI interface do not support “Progressive Scan OFF mode: 576i”. If no image appears when the HDMI connectors on recorder and the TV are joined, connect the analog VIDEO OUT jack to the video input on TV, in order to display the image through the recorder. Then press the RESOLUTION button on the front of the unit repeatedly until the image appears.

• Changing the resolution when the recorder is connected with HDMI connector may result in malfunctions. To solve the problem, turn off the recorder and then turn it on again.

Notes:

• If your TV is NOT capable of handling 96 kHz sampling frequency, set the [Sampling Freq.] option to [48 kHz] on the setup menu (See page 22). When this choice is made, this unit will automatically convert any 96 kHz signals to 48 kHz so your system can decode them.

• If your TV is not equipped with Dolby Digital and MPEG decoder, set the [Dolby Digital] and [MPEG] options to [PCM] on the setup menu (See page 22).

• If your TV is not equipped with DTS decoder, set the [DTS] options to [OFF] on the setup menu (See page 22). To enjoy DTS multi channel surround, you must connect this recorder to a DTS compatible receiver via one of this recorder’s digital audio outputs.

• The arrow on the cable connector body should face up for correct alignment with the connector on the recorder.

• If there is noise or lines on the screen, please check the HDMI cable.

HDMI compatible TV

Rear of the recorder

About HDMI

HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD Players, Set-Top Boxes, and other AV devices. HDMI was developed to provide the technologies of HDCP (High-bandwidth Digital Content Protection). HDCP is used to protect digital content transmitted and received.

HDMI has the capability to support standard, enhanced, or high-definition video plus standard to multi-channel surround-sound audio, HDMI features include uncompressed digital video, a bandwidth of up to 5 gigabytes per second, one connector (instead of several cables and connectors), and communication between the AV source and AV devices such as DTVs.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.

Additional Information for HDMI

• When you connect a HDMI or DVI compatible device make sure of the followings: – Try switching off the HDMI/DVI device and this

recorder. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this recorder.

– The connected device’s video input is set correctly

for this unit.

– The connected device is compatible with

720(1440)×576i, 720×576p, 1280×720p, or 1920×1080i video input.

• Not all HDCP-compatible DVI devices will work with this recorder. – It’s impossible copy protected-DVD title’s playback

in non-HDCP devices.

Connecting to an Amplifier

Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/ Pro Logic

Connect the Left and Right AUDIO OUT jacks on the recorder to the audio left and right in jacks on your amplifier, receiver, or stereo system, using the audio cables (A).

Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS)

1. Connect one of the recorder’s DIGITAL AUDIO OUT jacks (OPTICAL O or COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (optical O or coaxial X) audio cable.

2. You will need to activate the recorder’s digital output. (See “Audio Settings” on page 21).

Digital Multi-channel sound

A digital multi-channel connection provides the best sound quality. For this you need a multi-channel Audio/ Video receiver that supports one or more of the audio formats supported by your recorder (MPEG 2, Dolby Digital and DTS). Check the receiver manual and the logos on the front of the receiver.

Caution

Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected.

Rear of the recorder

English

Amplifier (Receiver)

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Out” are trademarks of DTS, Inc.

Notes:

• Six Channel Digital Surround Sound via digital

connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder.

• To see the audio format of the current DVD in the on-

screen display, press AUDIO.

• This recorder does not perform internal (2 channel)

decoding of a DTS sound track. To enjoy DTS multi channel surround, you must connect this recorder to a DTS compatible receiver via one of this recorder’s digital audio outputs.

Accessory Audio/Video Connections

Connecting a PAY-TV/Canal Plus Decoder

You can watch or record PAY-TV/Canal Plus programmes if you connect a decoder (not supplied) to the recorder. Disconnect the recorder’s mains lead from the mains when connecting the decoder. To watch or record PAY-TV/Canal Plus programmes, set [AV2 Connection] option to [Decoder] (see page 20) and set the program’s [Decoder On/Off] option to [On] on the Setup menu (page 19).

Tip:

You do not need to turn on the recorder to view the signals from the connected tuner on your TV.

Note:

If you disconnect the recorder’s mains lead, you will not be able to view the signals from the connected decoder.

PAY-TV/Canal Plus Decorder

Connecting to the EURO AV2 DECODER jack

Connect a VCR or similar recording device to the EURO AV2 DECODER jack of this recorder. To watch or record the source from EURO AV2 DECODER jack, set [AV2 Connection] option to [Others] (see page 20) and set [AV2 Record] option to [Auto], [CVBS] or [RGB] as required (see page 24).

VCR, Cable Box, or Satellite Tuner, etc.

Rear of the recorder

Tip:

You do not need to turn on the recorder to view the signals from the connected tuner on your TV.

Rear of the recorder

Notes:

• Pictures containing copy protection signals that prohibit any copying cannot be recorded.

• If you pass the recorder signals via the VCR, you may not receive a clear image on your TV screen. Be sure to connect your VCR to the recorder and your TV in the order shown below. To watch video tapes, watch the tapes through a second line input on your TV.

Line input 1

VCR RECORDER

• When you record to a VCR from this recorder, do not switch the input source to TV by pressing the TV/ DVD button on the remote.

• If you are using a B Sky B tuner, be sure to connect the tuner’s VCR SCART jack to the EURO AV2 DECODER jack.

• If you disconnect the recorder’s mains lead, you will not be able to view the signals from the connected VCR or tuner.

Line input 2

Connecting to the INPUT 3 or INPUT 4 Jacks

Connect the input jacks (AV3, AV4) on the recorder to the audio/video out jacks on your accessory component, using audio/video cables.

Note:

If you use the S-VIDEO IN jack on the front panel, the VIDEO IN jack on the front panel is not available.

Jack panel of Accessory Component

(VCR, Camcorder, etc.)

Connecting a Digital Camcorder

Using the front panel DV IN jack, it is possible to connect a DV digital camcorder and digitally transfer DV tapes to DVD.

Use a DV cable (not supplied) to connect the DV in/out jack of your DV camcorder to the front panel DV IN jack of this recorder. (See page 45 for operating input switch.)

Notes:

• This jack is for connection to DV digital camcorder only. It is not compatible with digital satellite tuners or D-VHS video decks.

• The DV IN jack cannot be used to connect some devices.

• No copy-guarded signal can be recorded.

• When you turn the recorder on after connecting the DV cable, the recorder may not recognize the DV digital camcorder.

DV Digital Camcorder

IN/OUT

English

Rear of the recorder

Front of

the recorder

Front of the recorder

Using the Home Menu

Initial Settings

From the Home Menu screen you can access all the Media (HDD, DISC, MEMORY CARD) for playback and recording of the recorder.

1. Press HOME to display the Home Menu screen.

2. Use the W / X buttons to select a main option you

want. Sub options appearss.

3. Use the S / T and ENTER buttons to select the

sub option you want.

4. To exit the HOME menu, press HOME.

• TV HDD: Returns to live TV viewing for HDD recording. Pressing the HDD button on the remote control will also allow you to directly choose this option.

• TV DVD: Returns to live TV viewing for DVD recording. Pressing the DVD button on the remote control will also allow you to directly choose this option.

MOVIE

• HDD: Displays the Title List menu for HDD. (page 47)

• HDD DivX: Displays the [Movie List] menu for HDD. (page 30)

•DISC:

– Displays Title List menu for recordable disc.

(page 47) – Displays [Movie List] menu for DivX disc. (page 30) – Plays back Video CD or DVD-Video disc.

(page 27-30)

PHOTO (See page 34)

• HDD: Displays [Photo List] menu for HDD.

• DISC: Displays [Photo List] menu for disc.

• Memory Card 1/2: Displays [Photo List] menu for memory card.

MUSIC (See page 32)

• HDD: Displays [Music List] menu for HDD.

• DISC: Displays [Music List] (or Audio CD) menu for disc.

• Memory Card 1/2: Displays [Music List] menu for memory card.

SETUP (See page 18)

• Start: Displays Setup menu.

In this menu system, there are several ways to customize the settings provided. Most menus consist of three levels to set up the options, but some require greater depth for the variety of settings.

General Operation

1. Press SETUP and the Setup menu appears.

2. Use S / T to select the desired option.

3. While the desired item is selected, press X to move

to the second level.

4. Use S / T to select the second desired option.

5. Press X to move to the third level.

6. Use S / T to select the desired setting then press

ENTER to confirm your selection. Some items require additional steps.

7. Press SETUP to exit the Setup menu.

Note:

Press W to go back to the previous level.

General Settings

Auto Programming

This recorder is equipped with a frequency synthesized tuner capable of receiving up to 88 TV channels.

Preparation:

• Connect the recorder to the desired type of aerial, as shown in Connecting to the Aerial on page 12.

1. Select the [Auto Programming] option.

2. Press X to move to the third level.

[Country] option is highlighted.

3. Use S / T to select a country then press X.

[Start] icon is highlighted. If your country is not listed, select [Others].

4. Press ENTER to begin the channel search.

The tuner will automatically cycle through all available channels in the area and place them in the tuner’s memory.

Note:

After you have connected your recorder for the very first time. If you press SETUP for initial setting, you can only set the [Auto Programming] option. Then you can set the other options.

Program Edit

You can perform a search to select and store TV channels manually. When you select [Program Edit] in step 4 above, the display for setting channels appears.

Program Edit

You can edit a channel manually (add, delete, name, move, etc.).

1. Select [Program Edit] option then press X.

2. Press ENTER while [Edit] is selected. The Program List menu appears.

3. Use S / T to select a PR number then press ENTER.

4. Use S / T to select the program option then press ENTER.

• [Program Edit] Sets the channel manually. See

“Program Edit” on the right.

• [Station Rename] Changes the station name. The

display for entering characters appears. To enter characters, see page 52. Names can be up to 5 characters long.

• [Move] Sorts the programme positions on the

Program List. Press S / T to move the selected programme position to a new location.

• [Delete] Disables a programme position you do

not need.

• [Decoder On/Off] Sets the channels for the

decoder. You need this setting to watch or record PAY-TV/Canal Plus programmes. Press ENTER so [Decoder] appears on the display. Press ENTER again to turn off the setting.

• [NICAM Auto/off] Sets the channels for the

NICAM broadcast. Normally, [NICAM] is lit on the display. If the sound from NICAM broadcast is not clear, press ENTER so [NICAM] disappears.

5. Press RETURN ( ) repeatedly to exit Program List menu.

1. Use W / X to select the item and press S / T to

change the setting.

English

• [PR] indicates the selected programme position.

• [Seek] Searches for a channel automatically. Searching stops when the recorder tunes in a channel.

• [Ch.] Changes the channel number.

• [MFT] Fine tunes the channel to obtain a clearer picture.

• [PAL/SECAM] Changes TV signal system (PAL or SECAM).

2. Choose OK then press ENTER to confirm the setting and returns to the Program List menu.

AV1 Decoder

Sets the EURO AV1 AUDIO/VIDEO jack for inputting encoded video signals.

1. Press INPUT while the Program List menu appears.

2. Press ENTER so [Canal+] appears on the display. Press ENTER again to turn off the setting.

• Off: Inputs the signals from the EURO AV1

AUDIO/VIDEO jack. Normally select this.

• On: The encoded video signal input from the

EURO AV1 AUDIO/VIDEO jack is output to the EURO AV2 DECODER jack for decoding. The decoded signal is then input back through the EURO AV2 DECODER jack so you can record or view PAY-TV/Canal Plus programmes. In this case, select [AV1] by pressing INPUT button.

Auto Clock Set

Display Mode

When Channel auto search is completed the actual Time and Date are also set automatically. If the time in the recorder display is not correct, the clock must be set manually.

1. Select [Clock set] option then press X.

2. Use S / T to select [Auto] option then press

ENTER.

Note:

There are cases where the TV station does not send, or sends wrong date and/or time information and the recorder sets the incorrect time. If this happens, we recommend that you set the clock manually.

Manual Clock Set

1. Select [Clock set] option then press X.

2. Use S / T to select [Manual] option then press

ENTER.

3. Enter the necessary information for date and time.

W / X (left/right): Moves the cursor to the previous or next column. S / T (up/down): Changes the setting at the current cursor position.

4. Press ENTER to confirm your setting, then press SETUP to exit the Setup menu.

Selects how to display a wide picture on the screen when [4:3] is selected in [TV Aspect].

• [Letter Box] Displays a wide picture with bands on the upper and lower portions of the screen.

• [Pan Scan] Automatically displays a wide picture on the entire screen and cuts off the portions that do not fit.

AV2 Connection

You can connect a decoder or other device to the EURO AV2 DECODER socket on the back.

• [Decoder] Select [Decoder] if you connect the recorder’s EURO AV2 DECODER jack to a PAY-TV or Canal Plus decoder.

• [Others] Select [Others] if you connect the recorder’s EURO AV2 DECODER jack to a VCR or similar recording device.

Power Save Mode

You can set up the unit into an economic power save mode. Nothing is displayed in the display window when the unit is turned off.

• [OFF] Power Save Mode is not active.

• [ON] Power Save Mode is active.

Notes:

• The encoded television signals (CANAL+ or PREMIERE) are not decoded in the Power Save Mode.

• The Power Save Mode is not available in the standby mode for the timer recording and when power off of the unit after receiving the encoded television signals (CANAL+ or PREMIERE).

TV Aspect (Standard and Wide)

Selects the aspect ratio of the connected TV (4:3 standard or wide).

• [4:3] Select this when connecting to a 4:3 screen TV. When you select [4:3], set [Display Mode] below.

• [16:9] Select this when connecting to a wide-screen TV or TV with a wide mode function.

Initialization (HDD Format)

You can reset the recorder to its original factory settings and initialize the HDD or Memory Card.

• [Factory Set] If you need to, you can reset the recorder to all its factory settings. Some options cannot be reset. (Rating, Password, and Area Code)

• [HDD format] Initializes the HDD (Hard Disk Drive): everything recorded on the HDD will be erased.

• [M/C format] Initializes the M/C (Memory Card): everything recorded on the Memory Card will be erased.

1. Select [Initialize] option then press X.

2. Press S / T to select the desired option then press

ENTER. The confirm message will appear.

3. Use W / X to select [Yes] or [No] then press

ENTER.

Language Settings

English

Display Menu

Select a language for the Setup menu and on-screen display.

Disc Menu/Audio/Subtitle

• [Original] Refers to the original language in which the disc was recorded.

• [Other] To select another language, press number buttons then ENTER to enter the corresponding 4-digit number according to the language code list in the reference chapter (see page 60). If you enter the wrong language code, press CLEAR.

• [Off] (for Disc Subtitle): Turn off Subtitle.

Audio Settings

Each DVD disc has a variety of audio output options. Set the recorder’s Audio Output according to the type of audio system you use.

+ 46 hidden pages