Hitachi CP-X885W, CP-X880W User Manual

Download

Liquid Crystal Projector

USER'S MANUAL, Vol. 2

TECHNICAL

REGULATORY NOTICES

CP-X880W / CP-X885W

USER'S MANUAL, Vol. 1

Please read this user's manual thoroughly to ensure correct usage through understanding.

ENGLISH

LCD Projector CP-X880/CP-X885

USER'S MANUAL Vol.1 (Basic)

USER'S MANUAL

Thank you for purchasing this projector.

WARNING • Please read the accompanying manual “SAFETY

INSTRUCTIONS” and this “USER'S MANUAL” thoroughly to ensure correct usage through understanding. After reading, store this instruction manual in a safe place for future reference.

NOTE

• The manufacturer assumes no responsibility for any errors that may appear in this manual

• The reproduction, transmission or use of this document or contents is not permitted without express written authority.

TRADEMARK ACKNOWLEDGEMENT :

• PS/2, VGA and XGA are registered trademarks of the International Business Machines Corporation.

• Apple, Mac and ADB are registered trademarks of Apple Computer, Inc.

• VESA and SVGA are trademarks of the Video Electronics Standard Association.

• Windows is a registered trademark of Microsoft Corporation.

• All other trademarks are the property of their respective owners.

• The information in this manual is subject to change without notice.

CONTENTS

Page

PROJECTOR FEATURES................2

PREPARATIONS ..............................2

PART NAMES...................................4

SETTING UP

THE PROJECTOR ............................6

CONNECTING

YOUR DEVICES................................8

USING THE REMOTE

CONTROL.......................................13

TURNING ON THE POWER ...........15

TURNING OFF THE POWER .........17

ADJUSTING THE VOLUME ...........18

TEMPORARILY MUTING

THE SOUND....................................18

ADJUSTING THE POSITION..........19

USING THE AUTOMATIC

ADJUSTMENT FEATURE ..............20

CORRECTING KEYSTONE

DISTORTIONS ................................21

USING THE MAGNIFY

FEATURE........................................22

FREEZING THE SCREEN ..............22

ADJUSTING SCREEN WITH

ONE-TOUCH...................................23

SELECTING THE ASPECT

RATIO..............................................24

TEMPORARILY BLANKING

THE SCREEN..................................24

DISPLAYING CHILD WINDOW

(P. IN. P: Picture in Picture) ..........24

USING THE MENU

FUNCTIONS....................................25

OPERATING THE PC SCREEN .....26

THE LAMP ......................................27

THE AIR FILTER.............................29

OTHER CARE.................................31

Page

PROJECTOR

FEATURES

This liquid crystal projector is used to project various computer signals as well as NTSC / PAL / SECAM video signals onto a screen. Little space is required for installation and large images can easily be realized.

Ultra High Brightness

●

Crisp, ultra-bright presentations is achieved by using a UHB (ultra high brightness) lamp and a highly efficient optical system

Partial Magnification Function

●

Interesting parts of images can be magnified for closer viewing

PREPARATIONS

Your projector should come with the items shown below. Check to make sure that all the items are included. Contact your dealer if anything is missing.

NOTE

• Keep the original packing material for future reshipment.

Power cord

(US Type)

Projector

(with Lens Cap)

Liquid Crystal Projector

CP-X880/CP-X885

ENGLISH

(CP-X880W/CP-X885W)

USER'S MANUALVol.1 Basic

DEUTSCH

Please read this user's manual thoroughly to ensure correct usage through understanding.

BEDIENUNGSANLEITUNG Teil 1 Grundlagen

Bitte lessen Sie diese Benutzerhandbuch zugunsten der korrekten Bedienung aufmerksam.

MANUEL D'UTILISATION Vol.1 Fondements

FRANÇAIS

Nous vous recommandons de lire attentivement ce manuel pour bien assimiler le fonctionnement de l'appareil.

MANUALE D'ISTRUZIONI Vol.1 Informazioni di base

Vi preghiamo voler leggere attentamente il manuale d'istruzioni in modo tale da poter comprendere

ITALIANO

quanto riportato ai fini di un corretto utilizzo del proiettore.

MANUAL DE USUARIO Vol.1 Básico

Lea cuidadosamente este manual del usuario para poder utilizar corretamente el producto.

ESPAÑOL

GEBRUIKSAANWIJZING Vol.1 Basis

Lees voor het qebruik alstublieft deze handleiding aandachtig door, om volledig profijt te hebben van de uitgebreide mogelijkheden.

BRUKERHÅNDBOK Vol.1 Grunnleggende

Vennligst les denne bruksanvisningen grundig for å være garantert driftssikker bruk.

NEDERLANDS

NSTRUÇÕES DO PROPRIETÁRIO Vol.1 Básico

Para assegurar o uso correto do equipamento, por favor leia atentamente este manual do utilizador.

NORSK

PORTGÊS

中中文文

REGULATORY NOTICES

RGB cable USB mouse

One Touch Function

●

Just press the ONE TOUCH button to automatically retrieve input signals, calibrate images, and correct keystone distortion

Whisper Mode Equipped

●

Special mode is available for reducing projector noise to achieve quieter operation

Power cord

(UK Type)

Power cord

(Europe Type)

Video/Audio cable

cable

User's Manuals

(Vol.1/Vol.2)

Safety Instructions

Soft carrying case

RS-232C

adapter

Two AA batteries

(for the remote

control)

LASER INDICATOR

VIDEO

RGB

STANDBY/ON

PAGE

ZOOM

FOCUS

DOWN

BLANK

LASER

ASPECT

PUSH

ENTER

ESC MENU RESET

POSITION

AUTO

PinP

MAGNIFY VOLUME

FREEZE

MUTE

OFF

WIRELESS KEYSTONE

ONE TOUCH

Remote control

WARNING Precautions to observe in regards to the power cord: Please use extra

caution when connecting the projector's power cord as incorrect or faulty connections may result in FIRE AND/OR ELECTRICAL SHOCK. Please adhere to the following safety guidelines to insure safe operation of the projector:

•

Only plug the power cord into outlets rated for use with the power cord's specified voltage range.

• Only use the power cord that came with the projector.

• NEVER ATTEMPT TO DEFEAT THE GROUND CONNECTION OF THE THREE-

PRONGED PLUG!

• Make sure that you firmly connect the power cord to the projector and wall outlet.

Connect your devices to the projector

Connect your computer, VCR and/or other devices you will be using to the projector.

Insert the batteries into the remote

control

Connect the power cord

(1)

Connect the connector of the electrical power cord to the AC inlet of the main unit.

(2) Firmly plug the power cord's plug into the outlet

8 12

〜

Power outlet

AC inlet

(1)

(2)

Power cord

PART NAMES

STANDBY/ON

INPUT

KEYSTONE

RESET

LANP

TENP

ONE TOUCH

RGB

BNC

DVI

VIDEO

S-VIDEO

COMPONENT

FOCUS ZOOM

RGB indicator

BNC indicator

DVI indicator

VIDEO indicator

S-VIDEO indicator

COMPONENT indicator

THE PROJECTOR

INPUT dial

KEYSTONE button

Indicates the corresponding reference page

ONE TOUCH button

RESET button

FOCUS button

ZOOM

MENU button

Vol.2

LAMP indicator

button

STANDBY/ON button

Elevator feet

Lens cap

COMPONENT VIDEO port

CONTROL port

WIRELESS & NETWORK

MODULE port Vol.2

RGB OUT port

DVI port

RGB port

Control Panel

Vol.2

Lens

REMOTE CONTROL port

Elevator button

VIDEO IN port

TEMP indicator

Elevator screw

Air filter

Remote sensor

S-VIDEO IN port

Remote sensor

AC power inlet

BNC port

AUDIO IN R/L port

AUDIO IN 1/2 port

Power switch

USB port

AUDIO OUT port

THE REMOTE CONTROL

LASER INDICATOR

VIDEO button

STANDBY/ON button

FOCUS buttons

BLANK button

Disk pad

Mouse cursor movement Left mouse click

ASPECT button

Left /Right

Key buttons

ESC button

MENU button

POSITION button

MAGNIFY buttons

WIRELESS button Vol.2

KEYSTONE button

LASER INDICATOR

VIDEO

ZOOM

AUTO

FREEZE

RGB

PAGE

DOWN

PinP

MUTE

ONE TOUCH

STANDBY/ON

FOCUS

BLANK

ASPECT

PUSH

ENTER

ESC MENU RESET

POSITION

MAGNIFY VOLUME

OFF

WIRELESS KEYSTONE

LASER

RGB button

ZOOM

buttons

PAGE buttons

LASER button

Right mouse button

Right mouse click

Lever switch (*)

RESET button

AUTO button

PinP button

VOLUME button

MUTE button

FREEZE button

ONE TOUCH button

REMOTE CONTROL port

* Using the lever switch

Flip toward disk pad : Up ( ) key

Flip toward MENU button

Press in center : ENTER button

: Down ( ) key

SETTING UP THE PROJECTOR

CAUTION •

of the accompanying manual “SAFETY INSTRUCTIONS” and this manual.

• If you press the elevator buttons without holding the projector, the projector might

crash down, overturn, smash your fingers and possibly result in malfunction. To prevent damaging the projector and injuring yourself, ALWAYS HOLD THE PROJECTOR whenever using the elevator buttons to adjust the elevator feet.

Install the projector in a suitable environment according to instructions

Adjusting the Projector's Elevator Feet

If the surface on which the projector is placed, or the screen is tilted, use the elevator feet and elevator screw to adjust the projection angle of the main unit. The adjustment range of the elevator feet is 0 to 9 degrees.

Press and hold in the elevator

buttons

Elevator button

Raise or lower the projector to the

desired height and then release the elevator buttons

When you release the elevator buttons, the elevator feet will lock into position.

Elevator feet

Turn the elevator screw to fine tune.

Elevator screw

Adjusting the Screen Size and Projection Distance

Refer to the illustrations and tables below to determine the screen size and projection distance.

The values shown in the table are calculated for a full size screen a:Distance from the projector to the screen (±10%) b:Distance from the lens center to the bottom of the screen (±10%) c:Distance from the lens center to the top of the screen (±10%)

The screen

Lens center

The screen

Top view

Side view

Top view

If 4:3 aspect ratio

Screen Size [inch (m)]

30 (0.8) 34 (0.9) 52 (1.3) 0 (0) 18 (46) 40 (1.0) 46 (1.2) 71 (1.8) 0 (0) 24 (61) 50 (1.3) 58 (1.5) 89 (2.3) 0 (0) 30 (76) 60 (1.5) 71 (1.8) 70 (1.8) 83 (2.1) 80 (2.0) 95 (2.4)

90 (2.3) 100 (2.5) 120 (3.0) 150 (3.8) 200 (5.0) 250 (6.3) 300 (7.5)

a [inch (m)]

Min. Max.

107 (2.7) 126 (3.2)

144 (3.7) 108 (2.7) 162 (4.1) 120 (3.0) 181 (4.6) 144 (3.7) 217 (5.5) 181 (4.6) 272 (6.9) 243 (6.2) 364 (9.2) 304 (7.7)

455 (11.6) 366 (9.3)

547 (13.9)

If 16:9 aspect ratio

[inch (cm)]c [inch (cm)]

0 (0) 36 (91) 0 (0) 42 (107) 0 (0) 48 (122) 0 (0) 54 (137) 0 (0) 60 (152) 0 (0) 72 (183) 0 (0) 90 (229) 0 (0)

120 (305)

0 (0)

150 (381)

0 (0)

180 (457)

Lens center

Side view

Screen Size [inch (m)]

30 (0.8) 37 (0.9) 57 (1.4) 2 (6.2) 17 (44) 40 (1.0) 50 (1.3) 77 (2.0) 13 (32) 27 (70) 50 (1.3) 64 (1.6) 97 (2.5) 16 (41) 31 (78) 60 (1.5) 77 (2.0) 70 (1.8) 90 (2.3) 80 (2.0)

90 (2.3) 100 (2.5) 120 (3.0) 150 (3.8) 200 (5.0) 250 (6.3) 300 (7.5)

a [inch (m)]

Min. Max.

117 (3.0)

137 (3.5) 104 (2.6) 157 (4.0) 117 (3.0) 177 (4.5) 131 (3.3) 197 (5.0) 157 (4.0) 237 (6.0) 198 (5.0) 296 (7.5) 265 (6.7)

396 (10.1) 332 (8.4)

496 (12.6)

399 (10.1)

596 (15.1)

[inch (cm)]c [inch (cm)]

19 (49) 34 (86) 22 (57) 37 (94) 26 (65) 40 (102) 29 (73) 43 (110) 32 (81) 47 (118)

38 (97) 53 (134) 48 (121) 63 (159) 64 (162) 78 (199) 80 (202) 94 (240) 96 (243)

110 (280)

CONNECTING YOUR DEVICES

Devices You Can Connect to the Projector (Refer to this section for planning your device configuration to use for your presentation.)

CAUTION • Incorrect connecting could result in fire or electrical shock. Please read this manual and the separate “SAFETY INSTRUCTIONS”.

ATTENTION

• Whenever attempting to connect other devices to the projector, please thoroughly read the manual of each device to be connected.

• TURN OFF ALL DEVICES prior to connecting them to the projector. Attempting to connect a live device to the projector may generate extremely loud noises or other abnormalities that may result in malfunction and/or damage to the device and/or projector. Refer to the “TECHNICAL” of the USER’S MANUAL (Vol.2) for the pin assignment of connectors and RS-232C communication data.

• Make sure that you connect devices to the correct port. Incorrect connection may result in malfunction and/or damage to the device and/or projector.

• Some other cables have to be used with core set. Use the accessory cable or a designated-type cable for the connection. For cables that have a core only at one end, connect the core to the projector.

• Secure the screws on the connectors and tighten.

Precautions to observe when connecting other devices to the projector

Indicates the corresponding reference page

Display monitors

DVD players

Laptop computers

VCRs

Desktop computers

Ports and Cables

Refer to the table below to find out which projector port and cable to use for connecting a given device. Use this table for determining which cables to prepare.

Function Projector Port Connection Cables

RGB

Analog RGB input

BNC(R/CR/PR)(G/Y)(B/CB/PB)(H)(V)

• When BNC (RGB) is selected (*)

Analog output RGB OUT

DVI input DVI

AUDIO IN 1

Linked to RGB or DVI port input

Audio input from computer

USB mouse control USB

PS/2 mouse control

ADB mouse control ADB mouse cable

Serial mouse control Serial mouse cable

RS-232C communications RS-232C adapter + RS-232C cable

S video input S-VIDEO IN S-video cable (mini DIN 4-pin jack)

Video input VIDEO IN Audio/video cable

Component video input

Audio input from video equipment

Audio output AUDIO OUT Audio cable (Stereo mini)

Wired remote control signal input

•

AUDIO IN 2

Linked to BNC (RGB) port input (*)

•

CONTROL

COMPONENT(CR/PR)(CB/PB)(Y)

BNC(R/CR/PR)(G/Y)(B/CB/PB)

• When BNC (COMPONENT) is selected (*)

AUDIO IN R,L

REMOTE CONTROL Audio cable (Stereo mini)

RGB cable (With D-sub 15-pin shrink jack and inch thread screws)

BNC cable

RGB cable (With D-sub 15-pin shrink jack and inch thread screws)

DVI cable

Audio/video cable (Stereo mini)

USB cable

PS/2 mouse cable

Component video cable

Audio/video cable or audio cable (RCA jack)

* Before using the BNC port, change RGB input to component video input on the BNC menu item of

the INPUT menu.

NOTE

•

This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by connecting

About Plug-and-Play Capability

this projector to computers that are VESA DDC (display data channel) compatible. Please take advantage of this function by connecting the accessory RGB cable to the RGB port (DDC 1/2B compatible). Plug-and-Play may not work properly if any other type of connection is attempted.

• Plug-and-Play is a system composed of the computer, its operating system and peripheral equipment (i.e. display devices).

• Please use the standard drivers as this projector is a Plug-and-Play monitor.

CONNECTING YOUR DEVICES (continued)

Connecting to a Computer

ATTENTION Whenever attempting to connect a laptop computer to the projector, be sure to activate the laptop's RGB external image output (set the laptop to CRT display or to simultaneous LCD and CRT display). For details on how this is done, please refer to the instruction manual of the corresponding laptop computer.

DVI

RGB

RGB OUT CONTROL

R/PR G/Y B/Ca/Pa H V

R/C

BNC AUDIO IN USBAUDIO OUT

RGB cable

Laptop computer

Analogue

RGB OUT

CR/PR

Ca/Pa

VIDEO INR-AUDIO IN-L

AUDIO OUT

REMOTE CONTROL

COMPONENT VIIDEO

S-VIDEO IN

AUDIO cable

(Stereo mini)

DVI

A B

RGB OUT CONTROL

RGB

R/PR G/Y B/Ca/Pa H V

R/C

BNC AUDIO IN USBAUDIO OUT

RGB cable

Analogue

RGB OUT

Desktop computer

CR/PR

Ca/Pa

MOUSE cable

CONTROL OUT

REMOTE CONTROL

COMPONENT VIIDEO

VIDEO INR-AUDIO IN-L

S-VIDEO IN

AUDIO cable

(Stereo mini)

AUDIO OUT

USB OUT

USB cable

If connecting to a USB port equipped computer

NOTE

• Some computers may have multiple display screen modes. Use of some of these modes will not be possible with this projector.

• For some RGB input modes, the optional Mac adapter is necessary.

Connecting to a Computer (continued)

BNC Input DVI Input

DVI

RGB

RGB OUT CONTROL

R/PR G/Y B/Ca/Pa H V

R/C

A A A A A

BNC AUDIO IN USBAUDIO OUT

BNC cable

BNC OUT

CR/PR

Ca/Pa

VIDEO INR-AUDIO IN-L

REMOTE CONTROL

COMPONENT VIIDEO

S-VIDEO IN

AUDIO cable

(Stereo mini)

AUDIO OUT

DVI

RGB

RGB OUT CONTROL

R/PR G/Y B/Ca/Pa H V

R/C

BNC AUDIO IN USBAUDIO OUT

DVI cable

DVI OUT

Desktop computer Desktop computer

CR/PR

Ca/Pa

VIDEO INR-AUDIO IN-L

REMOTE CONTROL

COMPONENT VIIDEO

S-VIDEO IN

AUDIO cable

(Stereo mini)

AUDIO OUT

CONNECTING YOUR DEVICES (continued)

VIDEO INR-AUDIO IN-L

S-VIDEO IN

RGB

BNC AUDIO IN USBAUDIO OUT

R/C

R/PR G/Y B/Ca/Pa H V

DVI

RGB OUT CONTROL

CR/PR

Ca/Pa

COMPONENT VIIDEO

REMOTE CONTROL

A A A

If using a S-video connection

AUDIO/VIDEO

OUT

S-VIDEOOUT

AUDIO/VIDEO cable

S-VIDEO cable

Connecting to a DVD Player

REMOTE

DVI

RGB OUT CONTROL

RGB

R/PR G/Y B/Ca/Pa H V

R/C

BNC AUDIO IN USBAUDIO OUT

CR/PR

Ca/Pa

A A A

B B B

VIDEO INR-AUDIO IN-L

CONTROL

COMPONENT VIIDEO

S-VIDEO IN

COMPONENT VIDEO cable

AUDIO/VIDEO cable

S-VIDEO cable

COMPONENT OUT

AUDIO/VIDEO OUT

If using a S-video connection

S-VIDEO OUT

Ifusingacomponent videoconnection

Ifusinganaudio/video connection

DVD player

Connecting to a Display Monitor

Connecting to a VCR

VCR

RGB

R/PR G/Y B/Ca/Pa H V

R/C

DVI

RGB OUT CONTROL

BNC AUDIO IN USBAUDIO OUT

RGB cable

Display monitor

REMOTE CONTROL

CR/PR

COMPONENT VIIDEO

Ca/Pa

VIDEO INR-AUDIO IN-L

S-VIDEO IN

RGBIN

USING THE REMOTE CONTROL

Putting batteries into the remote control unit

CAUTION

Always handle the batteries with care and use them only as directed. Improper use may result in

battery cracking or leakage, which could result in fire, injury and/or pollution of the surrounding environment.

• Keep the battery away from children and pets.

•

Be sure to use only the batteries specified for use with the remote control. Do not mix new batteries with used ones.

•

When inserting batteries, verify that the plus and minus terminals are aligned correctly (as indicated in the remote control).

• When you dispose the battery, you should obey the law in the relative area or country.

Remove the battery cover

Slide back and remove the battery cover in the direction of the arrow.

Insert the batteries

Align and insert the two AA batteries (that came with the projector) according to their plus and minus terminals (as indicated in the remote control).

Close the battery cover

Replace the battery cover in the direction of the arrow and snap it back into place.

Precautions to observe in regards to the batteries

USING THE REMOTE CONTROL (continued)

Operating the remote control

WARNING • The laser pointer of the remote control transmitter is used in place of a finger or rod. Never look directly into the laser beam outlet or point

the laser beam at other people. The laser beam can cause vision problems.

CAUTION other than those specified herein may result in hazardous radiation exposure.

•

The remote control works with both the projector's front and rear remote sensors.

•

The range of the remote sensor on the front is 3 meters with a 60-degree range (30 degrees to the left and right of the remote sensor), and back is 3 meters with a 40-degree range.

•

Since the remote control uses infrared light to send signals to the projector (Class 1 LED), be sure to use the remote control in an area free from obstacles that could block the remote control's output signal to the projector.

•

The wired remote control: You can use the remote control as a wired remote control, by connecting the REMOTE CONTROL ports of the main unit and remote control via an audio cable (3.5 dia. stereo mini cable with plugs).

• Use of controls or adjustments or performance of procedures

30 degrees

approximately 3 meters

30 degrees

approximately 3 meters

20 degrees

ATTENTION

Precautions to observe when using the remote control

• Do not disassemble the remote control.

• Do not drop or otherwise expose the remote control to physical impact.

•

Do not get the remote control wet or place it on wet objects. Doing so may result in malfunction.

• Do not place the remote control near the projector’s lens, fan, or vents.

• Remove the batteries from the remote control and store them in a safe place if you

won't be using the remote control for an extended period.

• Replace the batteries whenever the remote control starts to malfunction.

•

When strong light, such as direct sunlight or light from an extremely close range (such as from an inverter fluorescent lamp), hits the projector's remote sensor, the remote control may cease to function. Adjust the direction of the projector to keep light from directly hitting the projector's remote sensor.

STANDBY/ON

VIDEO

DOWN

BLANK

LASER INDICATOR

LASER

RGB

FOCUS ZOOM PAGE

TURNING ON THE POWER

STANDBY/ON

INPUT

KEYSTONE

RESET

LANP

TENP

ONE TOUCH

RGB

BNC

DVI

VIDEO

S-VIDEO

COMPONENT

FOCUS ZOOM

Precautions

Connect all devices to be used to the projector prior to turning on the power.

WARNING When the power is ON, a strong light is emitted. Do not look into the lens.

Make sure that the power cord is firmly and

correctly connected to the projector and outlet

Turn on the projector's power

Set the power switch to [ | ] (ON). The STANDBY/ON indicator will light to solid orange.

Control panel

STANDBY/ON indicator

power switch

〜

power on/off in right order.

• Power on the

• Power off the

NOTE

projector before the computer or video tape recorder.

projector after the computer or video tape recorder.

Turn the

Press the STANDBY/ON button (control

panel or remote control)

• The projector begins warming up and the STANDBY/ON indicator blinks green.

• The STANDBY/ON indicator stops blinking and lights to solid green once the projector's power is completely on.

Remove the lens cap

The picture is projected.

STANDBY/ON

TURNING ON THE POWER (continued)

Selecting an Input Signal

Using the remote control

If selecting RGB input Press the RGB button

Press this button to toggle between the devices connected to RGB IN 1 and 2. As illustrated below, each time you press the RGB button, the projector switches between RGB IN 1 and 2. Select the signal you wish to project.

•

When BNC (RGB) is selected:

RGB BNC(RGB) DVI

•

When BNC (COMPONENT) is selected:

RGB DVI

RGB

If selecting video input Press the VIDEO button

Press this button to toggle between the devices connected to VIDEO IN, S-VIDEO IN and COMPONENT VIDEO. As illustrated below, each time you press the VIDEO button, the projector switches between VIDEO IN, S-VIDEO IN and COMPONENT VIDEO. Select the signal you wish to project.

•

When BNC (RGB) is selected:

VIDEO IN S-VIDEO IN COMPONENT VIDEO

VIDEO

Using the projector's control panel

Turn the INPUT dial

Turning the dial cycles through the inputs as shown below. Select the terminal to which the signal you want to project is input.

•

When BNC (RGB) is selected:

RGB BNC(RGB) DVI

COMPONENT VIDEO

•

When BNC (COMPONENT) is selected:

RGB BNC(COMPONENT) DVI

COMPONENT VIDEO

S-VIDEO VIDE

NOTE

Turn the INPUT dial and set it at the click point, otherwise input signal selection may be incorrect.

INPUT

•

When BNC (COMPONENT) is selected:

VIDEO IN S-VIDEO IN COMPONENT VIDEO

BNC(COMPONENT)

Use the ZOOM / buttons to adjust

the screen size

Use the FOCUS / buttons to adjust

the focus

ZOOM

(Remote control)(Control panel)

FOCUS

(Remote control)(Control panel)

TURNING OFF THE POWER

STANDBY/ON

INPUT

KEYSTONE

RESET

LANP

TENP

ONE TOUCH

RGB

BNC

DVI

VIDEO

S-VIDEO

COMPONENT

FOCUS ZOOM

LASER INDICATOR

VIDEO

ZOOM

AUTO

FREEZE

RGB

PAG E

DOWN

LASER

PinP

MUTE

ONE TOUCH

STANDBY/ON

FOCUS

BLANK

ASPECT

PUSH

ENTER

ESC MENU RESET

POSITION

MAGNIFY VOLUME

OFF

WIRELESS KEYSTONE

Control panel

Press the STANDBY/ON button (control

panel or remote control)

The message "Power off?" will appear on the screen for

STANDBY/ON

approximately 5 seconds.

Press the STANDBY/ON button again

(control panel or remote control)

Press the STANDBY/ON button again while the "Power off?" message is visible. The projector lamp goes off and starts cooling down. While cooling, the STANDBY/ON indicator flashes orange. When in this state, pressing the STANDBY/ON button has no effect. When lamp cooling is complete, the STANDBY/ON indicator stops flashing, and turning solid orange.

STANDBY/ON

Check that the STANDBY/ON indicator

stops blinking and lights to

power switch

solid orange. Switch the power switch to [O] (OFF).

NOTE

•

Except in cases of emergency, do not turn off the power switch while the STANDBY/ON indicator is solid or flashing green. Doing so could shorten the lamp lifetime.

STANDBY/ON indicator

Confirm that the STANDBY/ON indicator has

gone off and then attach the lens cap.

When the projector has completed powering down, the STANDBY/ON indicator will go off.

ADJUSTING THE VOLUME

DOWN

BLANK

ASPECT

PUSH

LASER

ENTER

OFF

ESC MENU RESET

POSITION

MAGNIFY VOLUME

MUTE

WIRELESS KEYSTONE

FREEZE

ONE TOUCH

AUTO

PinP

Press the VOLUME button

As illustrated on the right, a dialog will appear on the screen to aid you in adjusting the volume.

Use the lever switch / to adjust the

VOLUM E

volume

STANDBY/ON

FOCUS

BLANK

ASPECT

VIDEO

ZOOM

LASER INDICATOR

RGB

PAG E

DOWN

LASER

Press the VOLUME button again to close the dialog and

PUSH

ENTER

ESC MENU RESET

POSITION

AUTO

PinP

MAGNIFY VOLUME

FREEZE

OFF

WIRELESS KEYSTONE

MUTE

ONE TOUCH

complete this operation. (Even if you don't do anything, the dialog will automatically disappear after a few seconds.)

Press this to increase the volume

Press this to decrease the volume

TEMPORARILY MUTING THE SOUND

VOLUME

Press the MUTE button

As illustrated on the right, a dialog will appear on the screen indicating that you have muted the sound. Press the VOLUME button to close the dialog. (Even if you don't do anything, the dialog will automatically disappear after a few seconds.) Press the MUTE button again to restore the sound.

MUTE

VOLUME

ADJUSTING THE POSITION

LASER INDICATOR

VIDEO

STANDBY/ON

ZOOM

FOCUS

BLANK

ASPECT

PUSH

ENTER

ESC MENU RESET

POSITION

AUTO

MAGNIFY VOLUME

FREEZE

OFF

WIRELESS KEYSTONE

ONE TOUCH

RGB

PAG E

DOWN

PinP

MUTE

LASER

Press the POSITION button

As illustrated on the right, a dialog will appear on the screen to aid you in adjusting the position.

POSITION

Use the , , , buttons to adjust the

position

When you want to initialize the position, press the RESET button during adjustment. Press the POSITION button again to close the dialog and complete this operation. (Even if you don't do anything, the dialog will automatically disappear after a few seconds.) This function is only available for RGB/BNC (RGB) input.

POSITION

USING THE AUTOMATIC ADJUSTMENT FEATURE

BLANK

ASPECT

PUSH

LASER

ENTER

OFF

ESC MENU RESET

POSITION

MAGNIFY VOLUME

MUTE

WIRELESS KEYSTONE

FREEZE

ONE TOUCH

AUTO

PinP

Press the AUTO button

Automatic Adjustment for RGB Input

Horizontal position (H. POSIT), vertical position (V. POSIT), clock phase (H. PHASE) and horizontal size (H. SIZE) are automatically adjusted. Make sure that the application window is set to its maximum size prior to attempting to use this feature. Dark pictures may still be incorrectly adjusted. Use a bright screen when adjusting.

Automatic Adjustment for Video Input

The signal type best suited for the respective input signal is selected automatically. This feature is available only if VIDEO is set to AUTO in the INPUT menu.

AUTO

NOTE

The automatic adjustment operation requires approximately 10 seconds. Also, please note that it may not function correctly with some input signals.

CORRECTING KEYSTONE DISTORTIONS

ASPECT

PUSH

ENTER

ESC MENU RESET

POSITION

AUTO

MAGNIFY VOLUME

FREEZE

OFF

WIRELESS KEYSTONE

ONE TOUCH

PinP

MUTE

Press the KEYSTONE button

As illustrated on the right, a dialog will appear on the screen to aid you in correcting the distortion.

KEYSTONE

Use the , buttons to select the

direction of distortion to correct ( / )

Use the lever switch / to correct

distortion

Press the KEYSTONE button again to close the dialog and complete this operation. (Even if you don't do anything, the dialog will automatically disappear after a few seconds.)

KEYSTONE

NOTE

• This function may not be work well with some types of input signals.

• The adjustable range for correcting keystone distortions will vary with the type of

input signal.

USING THE MAGNIFY FEATURE

DOWN

BLANK

ASPECT

PUSH

LASER

ENTER

OFF

ESC MENU RESET

POSITION

MAGNIFY VOLUME

MUTE

WIRELESS KEYSTONE

FREEZE

ONE TOUCH

AUTO

PinP

PUSH

ENTER

OFF

ESC MENU RESET

POSITION

MAGNIFY VOLUME

MUTE

WIRELESS KEYSTONE

FREEZE

ONE TOUCH

AUTO

PinP

Press the MAGNIFY (ON) button

The projector enters MAGNIFY mode.

Press the POSITION button, then use the lever switch

/ , / to select the area to zoom. Press the

MAGNIFY

POSITION button again to finalize the zoom area.

POSITIONPOSITION

Use the lever switch / to adjust the

zoom level

Press the MAGNIFY (OFF) button to exit MAGNIFY mode and restore the screen to normal. (The projector will also automatically exit MAGNIFY mode if there is a change in the input signal's state.)

NOTE

The projector will automatically exit from MAGNIFY mode if either the INPUT SELECT,

AUTO, ASPECT or VIDEO feature is used, or, if there is a change in the input signal's state.

FREEZING THE SCREEN

Press the FREEZE button

The [II] icon appears and the screen will freeze at the current image. Press the FREEZE button again and the [ ] appears as the projector exits FREEZE

▲

FREEZE

mode.

NOTE

•

The projector will automatically exit from FREEZE mode if either the POSITION, VOLUME, MUTE, AUTO, BLANK ON/OFF or MENU ON/OFF feature is used, or, if there is a change in the input signal's state.

•

If the projector continues projecting the same image for a long time (i.e. you forget to exit FREEZE mode), the image might possibly remain as an afterimage. Do not leave the projector in FREEZE mode for too long.

ADJUSTING SCREEN WITH ONE-TOUCH

DOWN

BLANK

ASPECT

PUSH

LASER

FOCUS

ENTER

OFF

ESC MENU RESET

POSITION

MAGNIFY VOLUME

MUTE

WIRELESS KEYSTONE

FREEZE

ONE TOUCH

AUTO

PinP

ZOOM PAGE

Press the ONE TOUCH button

You can activate the following functions just by pressing the ONE TOUCH button:

(1) Signal search: Cycle through input signals, displaying

the images of retrieved signals. If no signal is found, returns to the signal that was selected before the search was begun.

•

When BNC (RGB) is selected:

RGB BNC(RGB) DVI

COMPONENT VIDEO

•

When BNC (COMPONENT) is selected:

S-VIDEO VIDE

RGB BNC(COMPONENT) DVI

COMPONENT VIDEO

S-VIDEO VIDE

(2) Automatic adjustment: In RGB mode, automatically

adjust the picture position and size; for VIDEO input, automatically select the signal mode. ( )

(3) Automatic keystone distortion correction:

This is only performed if ONE TOUCH of the AUTO menu is set to TURN ON. When performed, the unit automatically corrects vertical keystone distortion due to the (forward/backward) setup angle of the main unit. (Vol.2 )

ONE TOUCH

NOTES

• May not function properly with some input signals.

• This function takes about 10 seconds to display an image.

SELECTING THE ASPECT RATIO

ASPECT

DOWN

BLANK

PUSH

LASER

ENTER

ESC MENU RESET

POSITION AUTO

PinP

ASPECT

PUSH

ENTER

OFF

ESC MENU RESET

POSITION

MAGNIFY VOLUME

MUTE

WIRELESS KEYSTONE

FREEZE

ONE TOUCH

AUTO

PinP

Press the ASPECT button

RGB, DVI, COMPONENT VIDEO

(HDTV signals : 1125i (1035i/1080i), 750p)

4:3 16:9

VIDEO IN, S-VIDEO IN, COMPONENT VIDEO

(Non-HDTV signals : 525i, 525p,625i)

4:3 16:9 SMAL

TEMPORARILY BLANKING THE SCREEN

ASPECT

FOCUS

BLANK

ZOOM

PAG E

DOWN

LASER

Press the BLANK button

The input signal screen is shut off, and a blank screen appears. You can set the blank screen using the menu (from the SCREEN menu, select BLANK). Press the BLANK button again to remove the blank screen, and return to the input signal screen.

ASPECT

PUSH

ENTER

ESC MENU RESET

BLANK

DISPLAYING CHILD WINDOW (P. IN. P: Picture in Picture)

Press the P. in P. Button

You can display the video input in a child window while displaying RGB, BNC, or DVI input.

Display child window (small)

You can select the video input to display in the child window, and the position of the child window, from the INPUT menu. (Vol.2 )

Display child window (large)

No display

USING THE MENU FUNCTIONS

LASER INDICATOR

VIDEO

STANDBY/ON

ZOOM

FOCUS

BLANK

ASPECT

PUSH

ENTER

ESC MENU RESET

POSITION

AUTO

MAGNIFY VOLUME

FREEZE

OFF

WIRELESS KEYSTONE

ONE TOUCH

RGB

PAG E

DOWN

PinP

MUTE

LASER

Press the MENU button

The menu display appears on the screen. The projector

has the following menus: MAIN, PICTURE-1, PICTURE-2, INPUT, AUTO, SCREEN, and OPTION, WIRELESS. When you select a menu name using the lever switch / , the current settings of items that can be manipulated from that menu are displayed.

Use the lever switch / to select a menu, then

press the or ENTER button

The display of the selected menu appears.

[ex. Adjusting SHARPNESS]

Use the lever switch / to select PICTURE-1, then press the or ENTER button.

PUSH

ENTER

Use the lever switch / to select SHARPNESS,

MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION WIRELESS

: SELECT

COLOR BAL R COLOR BAL B SHARPNESS COLOR TINT

–1 +1 –1 +1 –1

then press the or ENTER button

The operation display of the selected item appears. To adjust a numerical value, press the or ENTER button again to switch to the single menu (small display showing only the operation display area).

[ex. Adjusting SHARPNESS]

Use the lever switch press the or ENTER button.

PUSH

ENTER

to select SHARPNESS, then

MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION WIRELESS

: SELECT

COLOR BAL R COLOR BAL B

SHARPNESS

COLOR

TINT

NOTE

•

For details about menu operations, see the separate "MULTI FUNCTIONAL SETTINGS" (Vol. 2).

Use the lever switch

to adjust the level

Press the MENU button to hide the menu and finish your operation. Alternatively, press the or ESC button to return to the previous display.

[ex. Adjusting SHARPNESS]

Use the lever switch

to adjust the sharpness.

OPERATING THE PC SCREEN

You can use the remote control as a simplified mouse or keyboard.

CAUTION

•

Only connect to a PC.

•

Before connecting, read the manuals of the device you will connect.

•

Do not unplug the connector cables while the computer is operating.

VIDEO

STANDBY/ON

ZOOM PAGE

FOCUS

BLANK

Caution: Mistaken use of the mouse/keyboard control could damage your equipment.

LASER INDICATOR

RGB

DOWN

LASER

PS/2, ADB, Serial Mouse Control

1. Turn off the projector and PC power, and connect the projector’s CONTROL terminal to the computer via the mouse cable. If a USB cable is connected, disconnect it. If a USB cable is connected, the USB control

2. function is given priority, and mouse control from the CONTROL terminal will not function.

3. Turn on the projector power, then the computer. The functions in the table below can be controlled. If you have difficulty with control, restart the computer (either from the software or by pressing the restart button).

Available Functions Remote Control Operation

ASPECT

PUSH

ENTER

ESC MENU RESET

POSITION

AUTO

MAGNIFY VOLUME

FREEZE

OFF

WIRELESS KEYSTONE

ONE TOUCH

PinP

MUTE

Move Pointer

Left click with mouse

Right click with mouse

USB Mouse/Keyboard Control

Connect the projector’s USB terminal to a PC using a USB cable. The functions in the table below can be controlled.

Available Functions Remote Control Operation

Move Pointer

Left click with mouse

Right click with mouse

Press the keyboard’s keys

Press the keyboard’s ENTER key Press the ENTER button

Press keyboard’s PAGE UP key Press PAGE UP button

Press keyboard’s PAGE DOWN key Press PAGE DOWN button

Press keyboard’s ESC key Press ESC button

Move using on the disk pad

Press the center of the disk pad

Press the right mouse button

Move using on the disk pad

Press the center of the disk pad

Press the right mouse button

Press

NOTES

•

It may not be possible to control notebook PCs, and other computers with built-in pointing devices (e.g. track balls), using this remote control. In this case, before connecting go into BIOS (system setup) and select external mouse, and disable the pointing devices. In addition, the mouse may not function if the computer does not have the needed utility program. See your computer’s hardware manual for details.

•

The USB control can be used with Windows 95 OSR 2.1 or higher. It may not be possible to use the remote control, depending on the computer’s configurations and mouse drivers.

•

The USB control can only be used for the functions listed above. You cannot do things like press two buttons at once (for instance, pressing two buttons at the same time to move the mouse pointer diagonally).

•

This function is not available while the lamp is warming up (the POWER indicator flashes green), while adjusting the volume and display, correcting for trapezoidal distortion, zooming in on the screen, using the BLANK function, or displaying the menu screen.

THE LAMP

HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE

To replace the lamp, check the model number of the replacement lamp (sold separately) and contact your local dealer. Replacement lamp model number: DT00531 If the projector is mounted on the ceiling, or if the lamp has broken, ask your dealer to replace the lamp. Lamp replacement is hazardous and should not be attempted by the user. Before replacing the lamp, make sure the power switch is off and the power cable is not plugged in, then wait at least 45 minutes for the lamp to cool sufficiently. Handling the lamp while hot can cause burns, as well as damaging the lamp.

WARNING

The LCD projector uses a glass lamp bulb. It is a mercury lamp with high

internal pressure. High-pressure mercury lamps can break with a loud bang, or burn out, if jolted or scratched, or through wear over time. Each lamp has a different lifetime, and some may burst or burn out soon after you start using them. In addition, when the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing mercury to escape from the projector’s vent holes.

•

Do not open the lamp cover while the projector is suspended from above. This is dangerous, since if the lamp’s bulb has broken, the shards will fall out when the cover is opened. In addition, working in high places is dangerous, so ask your local dealer to have the lamp replaced even if the bulb is not broken.

•

Handle with care: jolting or scratching could cause the lamp bulb to burst during use.

•

If the replace lamp indicator (see "Related Messages" (Vol.2 ) and "Regarding the indicator Lamps" (Vol.2 )) comes on, replace the lamp as soon as possible. Using the

lamp for long periods of time, or past the replacement date, could cause it to burst. Do not use old (used) lamps; this is a cause of breakage.

•

If the lamp breaks soon after the first time it is used, it is possible that there are electrical problems elsewhere besides the lamp. If this happens, contact your local dealer or a service representative.

•

If the lamp should break (it will make a loud bang when it does), ventilate the room well, and make sure not to breathe the gas that comes out of the projector vents, or get it in your eyes or mouth.

•

If the lamp should break (it will make a loud bang when it does), unplug the power cord from the outlet, and make sure to request a replacement lamp from your local dealer. Note that shards of glass could damage the projector’s internals, or cause injury during handling, so please do not try to clean the projector or replace the lamp yourself.

•

Obey local ordinances when disposing of used lamps. In most cases, it is possible to dispose of used bulbs in the same manner as used glass bottles, but in some cases, bulbs are sorted separately.

• Do not use the projector with the lamp cover removed.

THE LAMP (continued)

Replacing the lamp

All projector lamps will wear out eventually. If used for long periods of time, the image could become darkened, and the color contrast could be impacted as well. We recommend that you replace your lamps early. If the LAMP indicator turns red, or a message prompts you to replace the lamp when you power up the projector, the lamp needs to be replaced. (See "Related Messages" (Vol.2 ) and "Regarding the Indicator Lamps" (Vol.2 ) for details.)

Turn off the projector, and unplug the

power cord. Allow the lamp bulb to cool for at least 45 minutes, and prepare a new lamp (serial number: DT00531)

After making sure that the projector has

cooled adequately, slide the knob of a lamp cover lock as shown in the figure. Then, one side of the lamp cover is raised. Pull up the lamp cover and remove it, as shown in the figure

Knob of Lamp Cover Lock

Unscrew the 3 screws, and slowly pull

out the lamp by the handle

•

Be careful not to touch the inside of the lamp case.

P M A L

O C

M A L

O C

P M A

L O C

Insert the new lamp, and

tighten the 3 screws firmly to lock it in place

Interlocking the 2 tabs of the

lamp cover to the projector, put the lamp cover on the projector. Then push the point of the lamp cover to fix it, as shown in the figure. Make sure that the lamp cover does’t come up

Tabs

M A L O

Push

Turn on the projector power,

and reset the lamp timer

• To reset the lamp timer, from the OPTION menu, select the LAMP TIME. (Vol.2 )

ATTENTION •

Make sure that the screws are screwed in firmly. Loose screws could result in damage or injury.

• Do not use with lamp cover removed.

•

Do not reset the lamp timer without replacing the lamp. Reset the lamp timer always when replacing the lamp. The message functions will not operate properly if the lamp timer is not reset correctly.

• When the lamp has been replaced after the message of “CHANGE THE LAMP .....THE POWER

WILL TURN OFF AFTER 0 hr.” is displayed, or the LAMP indicator is red, complete the following operation within 10 minutes of switching power on.

NOTE

• The LAMP indicator is also red when the lamp unit reaches high temperature.

Before replacing the lamp, switch power off, wait approximately 20 minutes, and switch power on

again. If the LAMP indicator is still red, replace the lamp.

THE AIR FILTER

Caring for the air filter

The air filter should be cleaned about every 100 hours. If the LAMP indicator and TEMP indicator blink red simultaneously, or a message prompts you to clean the air filter when you turn on the unit, the filter needs to be cleaned. (See "Related Messages" (Vol.2 ) and "Regarding the Indicator Lamps" (Vol.2 ) for details.)

Turn off the projector, and unplug the power cord

Apply a vacuum cleaner to

the top of the air filter cover to clean the air filter

Turn on the projector, and use the menu to reset the filter

timer

• To reset the air filter timer, from the OPTION menu, select FILTER TIME.

8 9

Air Filter Cover

THE AIR FILTER (continued)

Replacing the air filter

If the soiling will not come off the air filter, or it becomes damaged, then it needs to be replaced. Please contact your local dealer, after confirming the model of your separately sold replacement air filter. Replacement air filter model: NJ07081

Turn off the projector, and unplug the power cord. Prepare a

new air filter (one specified for your projector)

Remove the air filter cover and air filter

Insert the new filter, and replace the

filter cover

Turn on the projector power, and using the menu, reset the

filter timer

• To reset the lamp timer, from the OPTION menu, select FILTER TIME.

ATTENTION • Make sure to turn off the power and unplug the power cord before caring for

the unit. Please carefully read "Safety Instructions", in order to care for your projector correctly.

• Do not use with air filter cover removed.

• If the air filter becomes clogged by dust or the like, internal temperature rises and could cause

malfunction. The power is automatically turned off in order to prevent the unit from overheating internally.

OTHER CARE

Caring for the inside of the projector :

In order to ensure the safe use of your projector, please have it cleaned and inspected by your local dealer about once every 2 years. Never try to care for the inside of the unit yourself. Doing so is dangerous.

Caring for the lens :

Lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the lens directly with your hand.

Caring for the cabinet and remote control transmitter :

Wipe lightly with gauze or a soft cloth. If soiling is severe, dip a soft cloth in water or a neutral cleanser diluted in water, and wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.

ATTENTION • Make sure to turn off the power and unplug the power cord before caring for

the unit. Please carefully read "Safety Instructions" in this manual, in order to care for your projector correctly.

• Do not use cleaners or chemicals other than those listed above, including benzene and paint thinner.

• Do not use aerosols or sprays.

• Do not polish or wipe with hard objects.

LCD Projector CP-X880/CP-X885

USER'S MANUAL Vol.2 (Extended)

USER'S MANUAL

Thank you for purchasing this projector.

WARNING • Please read the accompanying manual “SAFETY

INSTRUCTIONS” and this “USER'S MANUAL” thoroughly to ensure correct usage through understanding. After reading, store this instruction manual in a safe place for future reference.

NOTE

• The manufacturer assumes no responsibility for any errors that may appear in this manual

• The reproduction, transmission or use of this document or contents is not permitted without express written authority.

TRADEMARK ACKNOWLEDGEMENT :

• PS/2, VGA and XGA are registered trademarks of the International Business Machines Corporation.

• Apple, Mac and ADB are registered trademarks of Apple Computer, Inc.

• VESA and SVGA are trademarks of the Video Electronics Standard Association.

• Windows is a registered trademark of Microsoft Corporation.

• All other trademarks are the property of their respective owners.

• The information in this manual is subject to change without notice.

CONTENTS

Page

MULTIFUNCTIONAL SETTINGS ........................................................................2

WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED ......8

SPECIFICATIONS .............................................................................................11

WARRANTY AND AFTER-SERVICE................................................................12

.......................................................................................

For "TECHNICAL" see the end of this manual.

MULTIFUNCTIONAL SETTINGS

This device has 8 separate menus: MAIN, PICTURE-1, PICTURE-2, INPUT, AUTO, SCREEN, OPTION, WIRELESS. Each of these menus is operated using the same methods. The basic operations of these menus are as follows.

Menu screen display : Press the MENU button. Menu selection : Use the lever switch

or ENTER button.

Item selection : Use the lever switch

ENTER button.

Return menu to last previous screen

: Press the button or the ESC button.

Execution of settings and/or adjustments:Perform the operation using the lever switch

(For further details, read the explanation for each separate menu.)

nitialization of settings and/or adjustments

End menu operations: Press the MENU button, or do not perform any operation for

several seconds.

MAIN Menu

With the MAIN menu, the seven items shown in the Table below can be performed. Perform each operation in accordance with the instructions in the Table.

MAIN Menu

Item Description

BRIGHT

CONTRAST

ASPECT

PICT.POSIT.

GAMMA

MIRROR

LANGUAGE

Adjust Brightness: Light Dark

Adjust Contrast: Strong Weak

Select Aspect Ratio:

At RGB Input or Hi-Vision 1125i(1035i/1080i)/750p of COMPONENT VIDEO Input: 4:3 16:9 At VIDEO Input, S-VIDEO Input or 525i/525p/625i of COMPONENT VIDEO Input: 4:3 16:9 SMALL

• The SMALL picture may not be displayed correctly with certain input signals.

Select Picture Position (for 16:9/SMALL Picture):

TOP CENTER BOTTOM

Select Gamma Mode:

NORMAL CINEMA DYNAMIC

Select Mirror Status:

NORMAL H:INVERT V:INVERT H&V:INVERT

Select Menu Language:

ENGLISH ITALIANO

FRANÇAIS DEUTSCH ESPAÑOL

NORSK NEDERLANDS

POTUGUÊS

to select a menu name, then press the

to select an item, then press the or

: During operation, press the RESET button.

(Functions that are executed at the same time as a selection, including H PHASE, LANGUAGE selection, and ADJUST, will not be reset.)

MENU MAIN

BRIGHT

PICTURE-1

CONTRAST

PICTURE-2

ASPECT

INPUT

PICT. POSIT.

AUTO

GAMMA

SCREEN

MIRROR

OPTION

LANGUAGE

WIRELESS

: SELECT

Example : MAIN Menu

(BRIGHT)

PICTURE-1 Menu

: SELECT

MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION WIRELESS

COLOR BAL R COLOR BAL B SHARPNESS COLOR TINT

: SELECT

MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION WIRELESS

V POSITION H POSITION H PHASE H SIZE OVER SCAN

With the PICTURE-1 menu, the five items shown in the Table below can be performed. Perform each operation in accordance with the instructions in the Table.

PICTURE-1 Menu

Item Description

Example : PICTURE1 Menu

(COLOR BAL R)

COLOR BAL R

COLOR BAL B

SHARPNESS

COLOR

TINT

Adjust Red Color Balance: Dark Light

Adjust Blue Color Balance: Dark Light

Adjust Sharpness (for VIDEO/S-VIDEO): Clear Soft

Adjust COLOR (for VIDEO/S-VIDEO/COMPONENT VIDEO):

Dark Light

Adjust Tint (for VIDEO/S-VIDEO): Green Red

PICTURE-2 Menu

With the PICTURE-2 menu, the five items shown in the Table below can be performed. Perform each operation in accordance with the instructions in the Table.

PICTURE-2 Menu

Item Description

V POSITION

H POSITION

H PHASE

Adjust Vertical Position (for RGB): Up Down

Adjust Horizontal Position (for RGB): Left Right

Adjust Horizontal Phase (for RGB/COMPONENT VIDEO):

Right Left

• Adjust to eliminate flicker.

Example : PICTURE2 Menu

(V POSITION)

H SIZE

OVER SCAN

Adjust Horizontal Size (for RGB): Large Small

• If the horizontal size adjustment is excessive, the image may not be displayed correctly. In such a case, initialize H SIZE with the RESET button.

Select Over-scan Ratio (for VIDEO/S-VIDEO/COMPONENT VIDEO):

LARGE MIDDLE SMALL

• If you select LARGE, you may note streaking on the top and bottom of the screen, or flicker. If this is irritating, we suggest you select SMALL.

MULTIFUNCTIONAL SETTINGS (continued)

INPUT Menu

The three Input menu items listed in the table below can be manipulated. For RGB input, the reception signal’s horizontal and vertical frequency is displayed on the initial menu screen. Use the table below as a guide for operation.

INPUT Menu

Item Description

BNC Pin (R/CR/PR, G/Y, B/CB/PB, H, V) function selection:

BNC

VIDEO

BNC (RGB)

(R) (G) (B) (H) (V) (C

(Pins for RGB) (Pins for COMPONENT) Selecting BNC (RGB) allows the 5 RGB2 pins (R/CR/PR, G/Y, B/CB/PB, H, V) to be used as RGB signal BNC input as-is. Selecting BNC (COMPONENT) allows the 3 leftmost RGB2 pins (R/CR/PR, G/Y, B/CB/PB) to be used as the COMPONENT VIDEO input CR/PR, Y, and CB/PBpins.

Select Mode of Signal Type (for VIDEO/S-VIDEO):

AUTO NTSC PAL SECAM NTSC4.43 M-PAL N-PAL When AUTO is selected, the video/ S-video input function under ADJUST ( are enabled, and is executed simultaneously so that the optimum signal mode is selected from among the modes listed above. Use this function if the image becomes unstable with VIDEO/S-VIDEO. (e.g. The image becomes irregular, or lacks color.)

•

AUTO mode may not function correctly with a PAL60 signal and certain other signals.

• The AUTO mode operation requires approximately 10 seconds.

• For COMPONENT VIDEO, the signal type is identified automatically even if

this function is inactive. For a HDTV signal, refer to the item HDTV below.

BNC (COMPONENT)

) (Y) (CB/PB) ( - ) ( - )

R/PR

MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION WIRELESS

: SELECT

Example : INPUT Menu

BNC VIDEO HDTV SYNC ON G P. IN P. INPUT P. IN P. POSIT

(BNC)

RGB COMPONENT

HDTV

Select HDTV Signal Mode: 1080i 1035i

•

If the selected HDTV mode is incompatible with the input signal, the picture may be distorted.

On/Off SYNC ON G Mode: TURN ON TURN OFF Selecting TURN ON turns on the SYNC ON G mode. The SYNC ON G mode

SYNC ON G

allows reception of SYNC on G.

• In the SYNC ON G mode, the picture may be distorted with certain input

signals. In such a case, remove the signal connector so that no signal is received and turn SYNC ON G off, and then reconnect the signal.

P. IN P. INPUT

P. IN P. screen (*) input signal selection: VIDEO S-VIDEO

Selects the signal displayed on the P. IN P. subscreen.

P. IN P. screen (*) display position selection:

P. IN P. POSIT

Selects the position at which the P. IN P. subscreen is displayed.

(*) The P. IN P. (picture-in-picture) function displays the video signal image in a subscreen (P. IN P. screen) on top of the screen on which the RGB signal image is being displayed. (See “Displaying Child Window” Vol.1

AUTO Menu

With the AUTO menu, the four items shown in the Table below can be performed. Please perform each operation in accordance with the instructions in the Table.

AUTO Menu

Item Description

Auto Adjust (for RGB): Automatically adjusts H POSITION, V POSITION, H

PHASE, and H SIZE. Use this function with the maximum window size. Auto Adjust (for VIDEO/S-VIDEO): This function automatically selects the appropriate signal mode depending on input signals. This is only performed if

ADJUST

KEYSTONE

POWER OFF

AUTO is selected on the VIDEO menu item ( ) of the INPUT menu.

• This function may not be available with a PAL60 signal and certain other

signals.

• The AUTO mode operation requires approximately 10 seconds.

•

For COMPONENT VIDEO, the signal type is identified automatically even if this function is inactive. For more information on HDTV signals, see HDTV. ( )

Automatic keystone distortion correction:

You can automatically correct vertical keystone distortion corresponding to the angle (forward/backward tilt) at which the unit is set up.

• If the projection screen is inclined, or if the projector is angled downwards, it

may not be possible to make the correct adjustment when V: INVERT or H&V: INVERT is selected under the MIRROR item of the MAIN menu.

• When the zoom adjustment is set to the TELE side, automatic correction may

be excessive. The automatic correction function should be used with zoom set to WIDE whenever possible.

Adjust POWER OFF Time:

Long (MAX. 99 min.) Short (Min. 1 min.) (DISABLE: 0 min.) If the time set here passes without valid signal input (there is no signal input, or signal input is out of specifications), the standby mode is set (see "TURNING ON THE POWER" Vol.1 ). This function is inactive when DISABLE (0 min.) is

selected.

MENU MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION WIRELESS

: SELECT

ADJUST KEYSTONE POWER OFF ONE TOUCH

EXECUTE

Example : AUTO Menu

(ADJUST)

ONE TOUCH

Enabling/disabling the KEYSTONE function using the ONE TOUCH button:

TURN ON

TURN OFF Pressing the ONE TOUCH button will automatically retrieve pictures and automatically adjust the screen (see “ADJUSTING SCREEN WITH ONETOUCH”

Vol.1

), and you can also set the function to execute KEYSTONE

(see above in this table) simultaneously when pressed. KEYSTONE will be

executed if TURN ON is selected.

MULTIFUNCTIONAL SETTINGS (continued)

MENU MAIN

SCREEN Menu

With the SCREEN menu, the five items shown in the Table below can be performed. Please perform each operation in accordance with the instructions in the Table.

SCREEN Menu

Item Description

BLANK

START UP

MyScreen

MyScreen Size

MyScreen Lock

Selection of BLANK Screen:

MyScreen ORIGINAL

.. . .

The BLANK Screen may be voluntarily selected. The BLANK Screen is displayed when the screen has been erased (i.e., made to vanish) by manipulating the BLANK button (please refer to the “Temporarily Blanking the Screen” section of the separate booklet, Vol. 1 (Basic)).

MyScreen:

Using the MyScreen category (see this Table, below), one can register a desired screen

(or screens). At the time of factory shipment, this is set as a non-patterned (plain) blue color screen.

ORIGINAL: Option screens:

•

The MyScreen and the ORIGINAL Screen will each change to a non-patterned (plain) black color

Existing standard screens. Please make confirmation using the actual screen(s).

Various colored non-patterned (plain) screens displayed within the Menus.

screen several minutes after being displayed.

Selection of START UP Screen:

MyScreen ORIGINAL The START UP Screen may be voluntarily selected. The START UP Screen is displayed when no signal has been inputted, or when spec signals are being inputted.

MyScreen:

Using the MyScreen category (see this Table, below), one can register a desired screen

(or screens). At the time of factory shipment, this is set as a non-patterned (plain) blue color screen.

ORIGINAL: TURN OFF:

•

The MyScreen and ORIGINAL screens will switch to the BLANK screen (see above in this

Existing standard screens. Please make confirmation using the actual screen(s).

A non-patterned (plain) blue color screen.

table) a few minutes after being displayed. If the BLANK screen is the MyScreen or ORIGINAL screen, it will turn immediately to a solid black screen.

Registration of MyScreen:

When this item is executed, the MyScreen Menu for registration of MyScreen for the BLANK Screen and the START UP Screen is displayed. When operations are performed in accordance with this Menu, one can “cut” and register desired screens from among the received images within the display.

After the “Do you start capturing this picture?” message has been displayed, pressing the ESC (or RESET) button interrupts execution of the MyScreen. When the ENTER button is pressed, the picture becomes static (no longer moves), and a frame for picture cutting, as well as the message that follows below, appear. Please press the button when the screen you want to register is currently being displayed.

When the “Move the capture area as you want.” message has been displayed, pressing the ESC (or RESET)

button will eliminate the static state of the picture, and operations can be performed again from operation 1. The frame can be moved using the buttons. After designating the screen you want to register, pressing the ENTER button will initiate screen registration. The registration process takes approximately 1 minute to complete.

3. When the registration has been completed, the screen of the registered MyScreen, plus the message, “MyScreen registration is finished,” will be displayed for several seconds, after which the operation is terminated.

Selection of MyScreen display size:

x1 FULL

Invalidation of MyScreen registration function:

When TURN ON is selected, the MyScreen category (see this Table, above) cannot be executed; in this way, one can prohibit rewrites (“writeovers”) of the MyScreen.

Example : SCREEN Menu

TURN ON TURN OFF

PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION WIRELESS

: SELECT

BLANK START UP MyScreen MyScreen Size MyScreen Lock

(BLANK)

TURN OFF

MyScreen ORIGINAL

OPTION Menu

: SELECT

MAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION WIRELESS

VOLUME WHISPER IR REMOTE LAMP TIME FILTER TIME

With the OPTION menu, the five items shown in the Table below can be performed. Please perform each operation in accordance with the instructions in the Table.

OPTION Menu

Item Description

VOLUME

WHISPER

IR REMOTE

LAMP TIME

FILTER TIME

Adjust Volume: High Low

Select WHISPER Mode:

NORMAL WHISPER When WHISPER is selected the WHISPER mode is activated. In the WHISPER mode, acoustic noise and screen brightness are reduced.

Selecting the remote control receiver:

The unit has 3 remote control receivers, as shown in the figure to the right (1, 2, and 3). You can select which of them to activate (“v” in the figure), and which to disable.

• The ambient lighting and other factors may prevent the remote control operation from functioning properly. If this happens, use this function to disable receivers being impacted by unneeded light.

Refer to LAMP TIME: When set, this function displays the total time the projector lamp has been used since new.

Reset LAMP TIME [Use this function only when the lamp has been replaced!]:

Depress the RESET button for at least 3 seconds while lamp time is being displayed. The reset menu will then appear. After you replace the lamp with a new lamp, select RESET on the menu with the button.

• Do not reset the lamp time unless you have replaced the lamp. And, always reset the lamp time when replacing the lamp. The message functions will not operate properly if the lamp time is not reset correctly.

•

Before replacing the lamp, carefully read the descriptions headed "THE LAMP".

Refer to FILTER TIME: This function displays the total time the air-filter has been used since new.

Reset FILTER TIME [Use this function only when the filter is cleaned or replaced!]:

Depress the RESET button for at least 3 seconds while lamp time is being displayed. The reset menu will then appear. After you replace the filter, select RESET on the menu with the button.

RESET CANCEL

• Do not reset the filter time unless you have cleaned or replaced the filter. And, always reset the filter time when cleaning or replacing the filter. The message functions will not operate properly if the filter time is not reset correctly.

•

Before cleaning or replacing the filter, carefully read the descriptions headed "THE AIR FILTER".

Example : OPTION Menu

(VOLUME)

112 12 3 12 3 12 3 12 3 12 3 12 3

WIRELESS Menu

The WIRELESS menu is only enabled if the wireless function is enabled. Using the wireless function requires a Wireless & Network Module Terminal (sold separately). See the Wireless & Network Module Terminal user’s manual for more information about the WIRELESS menu. Contact your local dealer for more information about the wireless function and Wireless & Network Module Terminal.

WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED

Related Messages

When the unit's power is ON, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below.

Message Description

CHANGE THE LAMP

AFTER REPLACING LAMP,

RESET THE LAMP TIMER.

CHANGE THE LAMP

AFTER REPLACING LAMP,

RESET THE LAMP TIMER.

THE POWER WILL TURN OFF

AFTER

CHANGE THE LAMP

AFTER REPLACING LAMP,

RESET THE LAMP TIMER.

THE POWER WILL TURN OFF

AFTER CLEANING AIR FILTER,

AFTER 0 hr.

CLEAN THE AIR FILTER

RESET THE FILTER TIMER.

NO INPUT IS DETECTED

SYNC IS OUT OF RANGE

CHECK THE AIR FLOW

(Note 1)

hr.

(Note 1)

kHz Hz

Lamp usage time is approaching 2,000 hours. (Note 2) Preparation of a new lamp, and an early lamp change, is recommended. After you have changed the lamp, please be sure to reset the lamp timer.

Lamp usage time is approaching 2,000 hours. A lamp change within hours is recommended. (Note 2) When lamp usage reaches 2,000 hours, the power will automatically be turned OFF. Please change the lamp by referring to “THE LAMP” (Vol.1 ). After you have changed the lamp, please be sure to reset the lamp timer.

As lamp use has reached 2,000 hours, the power will soon be automatically turned OFF. (Note 2) Please immediately turn the power OFF, and follow the instructions in the “THE LAMP” (Vol.1 ). After you have changed the lamp, please be sure to reset the lamp timer. ( )

A note of precaution when cleaning the air filter. After cleaning the filter, operate FILTER TIME of the OPTION Menu ( ), and perform reset of the filter timer.

There is no input signal. Please confirm the signal input connection, and the status of the signal source.

The horizontal or vertical wavelength of the inputted signal is outside of the response parameters of this unit. Please confirm the specs for this unit or the signal source specs.

The internal portion temperature is rising. Please turn the power OFF, and allow the unit to cool down for approximately 20 minutes. After having confirmed the following items, then please resent the power to ON.

•

Is there blockage of the air passage aperture?

•

Is the air filter dirty?

•

Does the peripheral temperature exceed 35°C?

NOTES

Note 1: Although this message will be automatically disappeared after around 3 minutes, it will be

reappeared every time the power is turned ON.

Note 2: Lamps have a finite product life. Lamps are characterized by the fact that, after long hours of

usage, a lamp will no longer light up, or the lamp will break or burst, etc. This unit is equipped with an automatic shut-down function, such that the power will automatically be turned OFF when lamp usage time has reached 2,000 hours. Please be aware, however, that among lamp types, there are major differences in product lifetimes; a lamp may thus fail to light even prior to the functioning of the automatic shut-down function of this unit.

Regarding the Indicator Lamps

Lighting and flashing of the POWER indicator, the LAMP indicator, and the TEMP indicator have the meanings as described in the Table below. Please respond in accordance with the instructions within the Table.

POWER

indicator

The orange

lamp is lighted

Flashing of the green lamp

The green lamp is lighted

Flashing of the orange lamp

Blinking of the

red lamp

The red lamp

is lighted, or

blinks

The red lamp

is lighted, or

blinks

The red lamp

is lighted, or

blinks

The red lamp is

lighted, or

blinks

The green lamp

is lighted

The green

lamp is lighted

LAMP

indicator

Turned OFF

(Not lighted)

Turned OFF Turned OFF Turned OFF Turned OFF Turned OFF Turned OFF

- -

The red lamp

is lighted

Blinking of the

red lamp

Turned

OFF

Turned

OFF

Alternative blinking

with the red lamp

Simultaneous blinking

with the red lamp

TEMP

indicator

Turned OFF (Not lighted)

Turned

OFF

Turned

OFF

Blinking of the

red lamp

The red lamp is

lighted

Description

The STANDBY mode is set

The unit is warming up. Please wait. The unit is in an ON state. Ordinary operations may be performed. The unit is cooling down. Please wait.

The unit is cooling down. Please wait. A certain error has been detected. Wait until the POWER indicator lamp has finished flashing, and then perform the proper response measure using the item descriptions below as reference.

The lamp does not light. There is a possibility that the interior portion has become heated. Turn the power OFF and wait approximately 20 minutes. After the main unit has cooled down, please confirm whether or not there is blockage of the air passage aperture, whether or not the filter is dirty, and/or whether or not the peripheral temperature exceeds 35°C, etc. After performing any needed maintenance, turn the power ON again; if the same display is displayed, then please change the lamp.

Either there is no lamp and/or lamp cover, or either of these has not been properly fixed (attached). Turn the power OFF and wait approximately 45 minutes. After the main unit has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover. After performing any needed maintenance, turn the power ON again; if the same display is displayed, then please contact a sales store or a service company.

The cooling fan is not operating. Turn the power OFF and wait approximately 20 minutes. After the main unit has cooled down, please make confirmation that no foreign matter has become caught in the fan, etc. After performing any needed maintenance, turn the power ON again; if the same display is displayed, then please contact a sales store or a service company.

There is a possibility that the interior portion has become heated. Turn the power OFF and wait approximately 20 minutes. After the main unit has cooled down, please confirm whether or not there is blockage of the air passage aperture, whether or not the filter is dirty, and/or whether or not the peripheral temperature exceeds 35°C, etc. After performing any needed maintenance, turn the power ON again; if the same display is displayed, then please contact a sales store or a service company.

There is a possibility that the interior portion has become overcooled. Please use the unit within the usage temperature parameters (0°C to 35°C). After performing any needed maintenance, turn the power ON again; if the same display is displayed, then please contact a sales store or a service company.

This is a notification that it is time to clean the filter. After cleaning the filter, operate the FILTER TIME portion of the OPTION Menu, and perform reset of the FILTER TIME.

NOTE

When the interior portion has become overheated, for safety purposes, the power source is automatically turned OFF, and the indicator lamps may also be turned OFF. Press the “ for approximately 20 minutes. Please then use the unit only after having first confirmed that the unit has sufficiently

cooled down.

” (power OFF) side of the main power switch, and wait

WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED (continued)

Phenomena That May Easily Be Mistaken for Machine Defects

Before requesting repair, check in accordance with the following chart. If the situation cannot be corrected, then contact your dealer.

Phenomenon

Power does not come ON

No sound or pictures are outputted

Pictures are displayed, but no sounds are heard

Sounds are heard, but no pictures are displayed

Cases not involving a machine defect

The main power source is not ON. The electrical power cord is not plugged in. Correctly connect the power cord.

The main power source has been interrupted during operation, such as by a power outage (blackout), etc.

The input changeover settings are mismatched.

No signal is being inputted.

The electrical wiring to this unit is not correctly connected.

The volume setting has been set at (or adjusted to) an extremely low level.

The MUTE mode is the current setting.

The electrical wiring to this unit is not correctly connected.

The brightness setting has been set at (or adjusted to) an extremely low level.

The lens cap has not been removed.

Items to be confirmed

Turn on the main power.

Be sure to press the “O” (power OFF) side of the main power switch, and leave this OFF for approximately 20 minutes. After the unit has sufficiently cooled down, turn ON the power source.

Select the input signal, and correct the settings.

Correctly connect the connection cord.

Adjust the VOLUME setting to a higher level.

Press the MUTE button to release (change) the MUTE mode setting.

Correctly connect the connection cord.

Adjust the BRIGHT setting to a brighter level.

Remove the lens cap.

Reference

Page(s)

Vol.1-3, 15

Vol.1-15

Vol.1-16

Vol.1-8-12

Vol.1-18

Vol.1-8-12

Vol.2-2

Vol.1-15

Colors have a fadedout appearance Color tone is poor

Pictures appear dark

Pictures appear blurry

Input signal changes with no-operation.

INPUT dial is set between the click points.

Color depth setting or color tone setting

The brightness setting and/or contrast setting has not been properly adjusted.

The WHISPER mode is the current setting.

Lamp is approaching the end of its product lifetime.

Either the FOCUS setting or the H PHASE is not properly adjusted.

Perform picture adjustments by changing the COLOR BAL R, the COLOR BAL B, and/or the TINT settings, etc.

Perform picture adjustments by changing the BRIGHT and/or CONTRAST settings, etc.

Change (by releasing) from the WHISPER mode.

Exchange the old lamp with a new lamp.

Adjust the FOCUS and H PHASE settings.

Turn the INPUT dial and set it at the click point.

Vol.2-3

Vol.2-2

Vol.2-7

Vol.1-27, 28

Vol.1-16 Vol.2-3

Vol.1-16

NOTE

Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and such do not constitute or imply a machine defect.

380

117

130

10 303

290

120

SPECIFICATIONS

NOTE

• This specifications are subject to change without notice.

Item Specification

Product name Liquid crystal projector

Liquid crystal panel

Lens Zoom lens F=1.7 ~ 2.4 f=30.5 ~ 45.8 mm Lamp 275 W UHB Speaker 1.0W+1.0W (Stereo) Power supply AC100 ~ 120V, 4.7A / AC220 ~ 240V, 2.0A Power consumption 430W Temperature range 0 ~ 35°C (Operating) Size 380 (W) x 120 (H) x 290 (D) mm (Not including protruding parts) Weight (mass) 5.7 kg

Ports

Optional Parts

Panel size 2.5 cm (0.99 type) Drive system TFT active matrix Pixels 786,432 pixels (1024 horizontal x 768 vertical)

RGB Input Ports

RGB ................................1

BNC (when RGB selected)

– (R.G.B.H.V) ..................1

DVI..................................1

VIDEO Input Ports

VIDEO IN ........................1

S-VIDEO IN ....................1

COMPONENT VIDEO – (C

R/PR, CB/PB, Y) ........1

BNC

(when COMPONENT selected)

– (CR/PR, Y, CB/PB) ........1

AUDIO Ports

AUDIO IN 1 ....................1

AUDIO IN 2 ....................1

AUDIO IN (R, L)..............1

RGB Output Port

RGB OUT........................1

AUDIO Output Port

AUDIO OUT....................1

CONTROL Ports

CONTROL ......................1

USB ................................1

Other Ports

WIRELESS & NETWORK MODULE

REMOTE CONTROL ......1

Lamp: DT00531 Air Filter: NJ07081 * For others, consult your dealer.

....1

Dimension Diagram

Unit : mm

WARRANTY AND AFTER-SERVICE

If a problem occurs with the equipment, first refer to the “WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED” section and run through the suggested checks. If this does not resolve the problem contact your dealer or service company. They will tell you what warranty condition is applied.

TECHNICAL

SIGNAL CONNECTOR PIN ASSIGNMENT

RGB IN [1]/[2] RGB OUT

D-sub 15-pin Shrink Mini Din 4-pin

Pin No Signal Pin No Signal

1 Video input Red 9 2 Video input Green 10 Ground

3 Video input Blue 11 -

4 -

5 Ground RGB IN [2]: -

6 Ground Red RGB OUT : -

7 Ground Green 13 8 Ground Blue 14 Vertical sync

RGB IN [1]: SDA (DDC)

H. sync./ Composite sync.

RGB IN [1]: SCL (DDC) RGB IN [2]: -

RGB OUT : -

signal Terminal Specification

Video: RGB separate, Analog, 0.7Vp-p, 75Ω terminator (positive) H/V. sync.: TTL level (positive/negative) Composite sync.: TTL level D-sub 15-pin shrink jack

Video: RGB separate, Analog 0.7Vp-p, 75Ω terminator (positive) H/V. sync.: TTL level (positive/negative) Composite sync.: TTL level BNC connector x 5

TMDS, DC 150-1200 mV/AC 1.56 Vp-p, TTL Level (Positive/Negative) DVI connector

200mVrms, 57Ω (max. 3.0Vp-p) Stereo mini jack

Brightness signal: 1.0Vp-p, 75Ω terminator Color signal: 0.286Vp-p (NTSC, burst signal),75Ω terminator Color signal: 0.300Vp-p (PAL/SECAM, burst signal),75Ω terminator Mini DIN 4-pin jack

Y signal: 1.0 Vp-p, 75 Ω terminator C

R/PR signal: 0.7 Vp-p, 75 Ω terminator

B/PB signal: 0.7 Vp-p, 75 Ω terminator

RCA jack x 3 (BNC connector x 5)

200mVrms, 50 kΩ (max. 3.0Vp-p) RCA jack

Video: RGB separate, Analog 0.7Vp-p, 75Ω (positive) Sync.: H,V separate, TTL level (positive/negative) Composite sync.: TTL level D-sub 15-pin shrink jack

200mV(rms), output impedance 1kΩ (max. 3.0Vp-p) Stereo mini jack

RGB signal input

Video signal input

Signal output

Control functions

RGB

BNC (RGB) (R,G,B,H,V)

DVI

AUDIO IN 1 AUDIO IN 2 VIDEO IN 1.0Vp-p, 75Ω terminator, RCA jack

S-VIDEO IN

COMPONENT VIDEO (C

R/PR, CB/PB, Y)

BNC (COMPONENT) (C

R/PR, CB/PB, Y)

AUDIO IN R L

RGB OUT

AUDIO OUT

CONTROL D-sub 15pin shrink plug USB USB jack (B type)

S-VIDEO

Pin No

Signal Color:

0.286Vp-p (NTSC, burst signal),

75Ω terminator

0.3Vp-p (PAL/SECAM, burst signal), 75Ω terminator

Brightness:

1.0Vp-p, 75Ω terminator

3 Ground

4 Ground

Mini Din 4-pin

EXAMPLE OF COMPUTER SIGNAL

Resolution

H ××V

720 × 400

640 × 480

800 × 600

832 × 624

1024 × 768

1152 × 864

1280 × 960

1280 × 1024

1600 × 1200

fH (kHz) fV (Hz) Rating Signal mode

37.9 85.0 VESA TEXT Zoom in Zoom in

31.5 59.9 VESA VGA (60Hz) Zoom in Zoom in

35.0 66.7 Mac13"mode Zoom in Zoom in

37.9 72.8 VESA VGA (72Hz) Zoom in Zoom in

37.5 75.0 VESA VGA (75Hz) Zoom in Zoom in

43.3 85.0 VESA VGA (85Hz) Zoom in Zoom in

35.2 56.3 VESA SVGA (56Hz) Zoom in

37.9 60.3 VESA SVGA (60Hz) Zoom in

48.1 72.2 VESA SVGA (72Hz) Zoom in

46.9 75.0 VESA SVGA (75Hz) Zoom in

53.7 85.1 VESA SVGA (85Hz) Zoom in

49.7 74.5 Mac16"mode Zoom out Zoom in

48.4 60.0 VESA XGA (60Hz) Zoom out

56.5 70.1 VESA XGA (70Hz) Zoom out

60.0 75.0 VESA XGA (75Hz) Zoom out

68.7 85.0 VESA XGA (85Hz) Zoom out

67.5 75.0 VESA SXGA (75Hz) Zoom out Zoom out

60.0 60.0 VESA SXGA (60Hz) Zoom out Zoom out

64.0 60.0 VESA SXGA (60Hz) Zoom out Zoom out

80.0 75.0 VESA SXGA (75Hz) Zoom out Zoom out

91.2 85.0 VESA SXGA (85Hz) Zoom out Zoom out

75.0 60.0 VESA UXGA (60Hz) Zoom out Zoom out

Display mode

CP-X880 CP-X885

NOTE

• Some computers may have multiple display screen modes. Use of some

of these modes will not be possible with this projector.

• Be sure to check jack type, signal level, timing and resolution before connecting this projector to a computer.

• Depending on the input signal, full-size display may not be possible in some cases. Refer to the number of display pixels above.

• Although the projector can display signals (except DVI input) with resolution up to UXGA (1,600 x 1,200), the signal will be converted to the projector’s panel resolution before being displayed. The best display performance will be achieved if the resolutions of the input signal and projector panel are identical.

• The image may not be displayed correctly when the input sync. signal is “Composite Sync.” or “Sync. on G”.

• UXGA (1,600 x 1,200) signals cannot be displayed with DVI input.

DATA

HSYNC

DATA

VSYNC

INITIAL SET SIGNALS

The following signals are used for the initial settings. The signal timing of some computer models may be different. In such case, refer to adjust the V.POSIT and H.POSIT of the menu.

Back porch b

Front porch d

Display interval c

Sync a

Computer /

Signal

Horizontal signal timing (µs)

a b c d

TEXT 2.0 3.0 20.3 1.0

VGA (60Hz) 3.8 1.9 25.4 0.6

Mac 13"mode 2.1 3.2 21.2 2.1

VGA (72Hz) 1.3 3.8 20.3 1.0

VGA (75Hz) 2.0 3.8 20.3 0.5

VGA (85Hz) 1.6 2.2 17.8 1.6

SVGA (56Hz) 2.0 3.6 22.2 0.7

SVGA (60Hz) 3.2 2.2 20.0 1.0

SVGA (72Hz) 2.4 1.3 16.0 1.1

SVGA (75Hz) 1.6 3.2 16.2 0.3

SVGA (85Hz) 1.1 2.7 14.2 0.6

Mac 16"mode 1.1 3.9 14.5 0.6

XGA (60Hz) 2.1 2.5 15.8 0.4

XGA (70Hz) 1.8 1.9 13.7 0.3

XGA (75Hz) 1.2 2.2 13.0 0.2

XGA (85Hz) 1.0 2.2 10.8 0.5

1152×864 (75Hz)

1280×960 (60Hz)

1280×1024 (60Hz)

1280×1024 (75Hz)

1280×1024 (85Hz)

1600×1200 (60Hz)

1.2 2.4 10.7 0.6

1.0 2.9 11.9 0.9

1.0 2.3 11.9 0.4

1.1 1.8 9.5 0.2

1.0 1.4 8.1 0.4

1.2 1.9 9.9 0.4

Back porch b

Front porch d

Display interval c

Sync a

Computer /

Signal

Vertical signal timimg (lines)

a b c d

TEXT 3 42 400 1

VGA (60Hz) 2 33 480 10

Mac 13"mode 3 39 480 3

VGA (72Hz) 3 28 480 9

VGA (75Hz) 3 16 480 1

VGA (85Hz) 3 25 480 1

SVGA (56Hz) 2 22 600 1

SVGA (60Hz) 4 23 600 1

SVGA (72Hz) 6 23 600 37

SVGA (75Hz) 3 21 600 1

SVGA (85Hz) 3 27 600 1

Mac 16"mode 3 39 624 1

XGA (60Hz) 6 29 768 3

XGA (70Hz) 6 29 768 3

XGA (75Hz) 3 28 768 1

XGA (85Hz) 3 36 768 1

1152×864 (75Hz)

1280×960 (60Hz)

1280×1024 (60Hz)

1280×1024 (75Hz)

1280×1024 (85Hz)

1600×1200 (60Hz)

3 32 864 1

3 36 960 1

3 38 1024 1

3 37 1024 2

3 44 1024 1

3 46 1200 1

678

11 12

CONNECTION TO THE MOUSE CONTROL

RTS

GND

+5V

ADB

GND

+5V

(

POWER ON

)

DATA

678

11 12 13

CLK

DATA

SEL0

RTS

GND

+5V

DATA

GND +5V

CLK

678

11 12 13

ADB Mouse

CONTROL Terminal

D-sub 15-pin shrink jack

Serial Mouse

CONTROL Terminal

D-sub 15-pin shrink jack

USB Mouse

Projector

SEL0

RTS

GND

Computer

Mouse jack

Mini DIN 4-pin

Computer

1 2 3 4 5 6 7 8

9 10 11 12 13 14 15

1 2

DTR

GND

DSR

RTS

CTS

Mouse jack D-sub 9-pin

USB jack

(B type)

PS/2 Mouse

CONTROL Terminal

D-sub 15-pin shrink jack

Projector

—

DATA

GND

Projector

USB cable

Computer

—

DATA

GND

Computer

USB jack

(A type)

234

Mouse jack

Mini DIN 6-pin

1 2 3 4 5 6 7 8

9 10 11 12 13 14 15

GND

SELO

RTS

1 2 3 4 5 6 7 8 9

CD RD TD DTR GND DSR RTS DTS RI

2345

RS-232C COMMUNICATION

(1)

Turn off the projector and computer power supplies, and connect with the RS-232C adapter via the RS-232C cable.

(2) Turn on the computer power supply and after the computer has started up, turn on the

projector power supply.

Projector Computer

Control jack

D-sub 15-pin shrink jack

RS-232C adapter

Communications setting

19200bps, 8N1

1 Protocol

Consist of header (7 bytes) + command data (6 bytes).

2 Header

BE + EF + 03 + 06 + 00 + CRC_low + CRC_high CRC_low : Lower byte of CRC flag for command data. CRC_high : Upper byte of CRC flag for command data.

3 Command data

RS-232C jack

D-sub 9-pin

Command data chart

byte_0 byte_1 byte_2 byte_3 byte_4 byte_5

Action Type Setting code

low high low high low high

Action (byte_0 - 1)

Action Classification Content

1 SET Change setting to desired value.

2 GET Read projector internal setup value.

4 INCREMENT Increment setup value by 1.

5 DECREMENT Decrement setup value by 1.

6 EXECUTE Run a command.

RS-232C COMMUNICATION (continued)

Requesting projector status (Get command)

(1) Send the request code Header + Command data (‘02H’+‘00H’+ type (2 bytes)

+‘00H’+‘00H’) from the computer to the projector.

(2) The projector returns the response code ‘1DH’+ data (2 bytes) to the computer.

Changing the projector settings (Set command)

(1) Send the setting code Header + Command data (‘01H’+‘00H’+ type (2 bytes) +

setting code (2 bytes)) from the computer to the projector. (2) The projector changes the setting based on the above setting code. (3) The projector returns the response code ‘06H’ to the computer.

Using the projector default settings (Reset Command)

(1) The computer sends the default setting code Header + Command data (‘06H’+‘00H’+

type (2 bytes) +‘00H’+‘00H’) to the projector. (2) The projector changes the specified setting to the default value. (3) The projector returns the response code ‘06H’ to the computer.

Increasing the projector setting value (Increment command)

(1) The computer sends the increment code Header + Command data (‘04H’+‘00H’+

type (2 bytes) +‘00H’+‘00H’) to the projector. (2) The projector in creases the setting value on the above setting code. (3) The projector returns the response code ‘06H’ to the computer.

Decreasing the projector setting value (Decrement command)

(1) The computer sends the decrement code Header + Command data (‘05H’+‘00H’+

type (2 bytes) +‘00H’ + ‘00H’) to the projector. (2) The projector decreases the setting value on the above setting code. (3) The projector returns the response code ‘06H’ to the computer.

When a command sent by the projector cannot be understood by the computer

When the command sent by the projector cannot be understood, the error command ‘15H’ is returned by the computer. Some times, the projector ignores RS-232C commands during other works. If the error command ‘15H’ is returned, please send the same command again.

When data sent by the projector cannot be practice

When the command sent by the projector cannot be practiced, the the error code ‘1cH’ +‘xxxxH’ is returned. When the data length is greater than indicated by the data length code, the projector will ignore the excess data code. Conversely, when the data length is shorter than indicated by the data length code, an error code will be returned to the projector.

NOTE

undefined command or data.

•

Provide an interval of at least 40ms between the response code and any other code.

• The projector outputs test data when the power supply is switched ON, and when the lamp is lit. Ignore this data.

• Commands are not accepted during warm-up.

• Operation cannot be guaranteed when the projector receives an

Command data chart

Names Operation type Header

Blue BE EF 03 06 00 CB D3 01 00 00 30 03 00

White BE EF 03 06 00 6B D0 01 00 00 30 05 00

Blank Color

Mirror

Freeze

Startup

Language

Magnify

Auto off

Set

Black BE EF 03 06 00 9B D0 01 00 00 30 06 00

MyScreen BE EF 03 06 00 FB CA 01 00 00 30 20 00

ORIGNAL BE EF 03 06 00 FB E2 01 00 00 30 40 00

Get BE EF 03 06 00 08 D3 02 00 00 30 00 00

Normal BE EF 03 06 00 C7 D2 01 00 01 30 00 00

H Inverse BE EF 03 06 00 57 D3 01 00 01 30 01 00

V lnverse BE EF 03 06 00 A7 D3 01 00 01 30 02 00

H&V Inverse BE EF 03 06 00 37 D2 01 00 01 30 03 00

Get BE EF 03 06 00 F4 D2 02 00 01 30 00 00

Normal BE EF 03 06 00 83 D2 01 00 02 30 00 00

Freeze BE EF 03 06 00 13 D3 01 00 02 30 01 00

Get BE EF 03 06 00 B0 D2 02 00 02 30 00 00

ORIGNAL BE EF 03 06 00 0B D2 01 00 04 30 00 00

OFF BE EF 03 06 00 9B D3 01 00 04 30 01 00

MyScreen BE EF 03 06 00 CB CB 01 00 04 30 20 00

Get BE EF 03 06 00 38 D2 02 00 04 30 00 00

English BE EF 03 06 00 F7 D3 01 00 05 30 00 00

Français BE EF 03 06 00 67 D2 01 00 05 30 01 00

Deutsch BE EF 03 06 00 97 D2 01 00 05 30 02 00

Español BE EF 03 06 00 07 D3 01 00 05 30 03 00

Italiano BE EF 03 06 00 37 D1 01 00 05 30 04 00

Norsk BE EF 03 06 00 A7 D0 01 00 05 30 05 00

Nederlands BE EF 03 06 00 57 D0 01 00 05 30 06 00

Português BE EF 03 06 00 C7 D1 01 00 05 30 07 00

BE EF 03 06 00 37 D4 01 00 05 30 08 00

BE EF 03 06 00 A7 D5 01 00 05 30 09 00

BE EF 03 06 00 57 D5 01 00 05 30 0A 00

Get BE EF 03 06 00 C4 D3 02 00 05 30 00 00

Get BE EF 03 06 00 7C D2 02 00 07 30 00 00

Increment BE EF 03 06 00 1A D2 04 00 07 30 00 00

Decrement BE EF 03 06 00 CB D3 05 00 07 30 00 00

Get BE EF 03 06 00 08 86 02 00 10 31 00 00

Increment BE EF 03 06 00 6E 86 04 00 10 31 00 00

Decrement BE EF 03 06 00 BF 87 05 00 10 31 00 00

Command data

CRC Action Type Setting code

Brightness Reset

Contrast Reset Execute BE EF 03 06 00 A4 D2 06 00 01 70 00 00

V.Position Reset

Execute BE EF 03 06 00 58 D3 06 00 00 70 00 00

Execute BE EF 03 06 00 E0 D2 06 00 02 70 00 00

Command data chart

(continued)

Names Operation type Header

H.Position Reset Execute BE EF 03 06 00 IC D3 06 00 03 70 00 00

H.Size Reset Execute BE EF 03 06 00 68 D2 06 00 04 70 00 00

Color Balance

R Reset

Color Balance

B Reset

Sharpness Reset Execute BE EF 03 06 00 C4 D0 06 00 09 70 00 00

Color Reset Execute BE EF 03 06 00 80 D0 06 00 0A 70 00 00

Tint Reset Execute BE EF 03 06 00 7C D1 06 00 0B 70 00 00

Keystone_V Reset Execute BE EF 03 06 00 08 D0 06 00 0C 70 00 00

Keystone_H Reset Execute BE EF 03 06 00 98 D8 06 00 20 70 00 00

Auto Adjust Execute BE EF 03 06 00 91 D0 06 00 0A 20 00 00

Auto Keystone_V

Lamp Time Reset Execute BE EF 03 06 00 58 DC 06 00 30 70 00 00

Filter Time Reset Execute BE EF 03 06 00 98 C6 06 00 40 70 00 00

Blank on/off

Execute BE EF 03 06 00 94 D3 06 00 05 70 00 00

Execute BE EF 03 06 00 D0 D3 06 00 06 70 00 00

Execute BE EF 03 06 00 E5 D1 06 00 0D 20 00 00

Set

off BE EF 03 06 00 FB D8 01 00 20 30 00 00

on BE EF 03 06 00 6B D9 01 00 20 30 01 00

Get BE EF 03 06 00 C8 D8 02 00 20 30 00 00

BE EF 03 06 00 D9 D8 02 00 20 60 00 00

CRC Action Type Setting code

Command data

(Example of Return)

Error Status Get

Power

Set

Get

OFF

00 00 01 00 02 00 03 00 (Normal) (Cover-error) (Fan-error) (Lamp-error)

04 00 05 00 06 00 07 00 08 00 (Temp-error) (Air flow-error) (Lamp-Time-over) (Cool-error) (Filter-Error)

BE EF 03 06 00 2A D3 01 00 00 60 00 00

BE EF 03 06 00 BA D2 01 00 00 60 01 00 BE EF 03 06 00 19 D3 02 00 00 60 00 00

RGB BE EF 03 06 00 FE D2 01 00 00 20 00 00

BE EF 03 06 00 3E D0 01 00 00 20 04 00

RGB)

Video BE EF 03 06 00 6E D3 01 00 00 20 01 00

Set

Input Source

S-Video BE EF 03 06 00 9E D3 01 00 00 20 02 00

Component

BE EF 03 06 00 AE D1 01 00 00 20 05 00

DVI BE EF 03 06 00 0E D2 01 00 00 20 03 00

BNC (Component)

BE EF 03 06 00 5E D1 01 00 00 20 06 00

Get BE EF 03 06 00 CD D2 02 00 00 20 00 00

Get BE EF 03 06 00 31 D3 02 00 01 20 00 00

Volume

Increment BE EF 03 06 00 57 D3 04 00 01 20 00 00

Decrement BE EF 03 06 00 86 D2 05 00 01 20 00 00

Normal BE EF 03 06 00 46 D3 01 00 02 20 00 00

Mute

Set

Mute BE EF 03 06 00 D6 D2 01 00 02 20 01 00 Get BE EF 03 06 00 75 D3 02 00 02 20 00 00 Get BE EF 03 06 00 89 D2 02 00 03 20 00 00

Brightness

Increment BE EF 03 06 00 EF D2 04 00 03 20 00 00

Decrement BE EF 03 06 00 3E D3 05 00 03 20 00 00

Get BE EF 03 06 00 FD D3 02 00 04 20 00 00

Contrast

Increment BE EF 03 06 00 9B D3 04 00 04 20 00 00

Decrement BE EF 03 06 00 4A D2 05 00 04 20 00 00

Get BE EF 03 06 00 01 D2 02 00 05 20 00 00

Color Balance R

Increment BE EF 03 06 00 67 D2 04 00 05 20 00 00

Decrement BE EF 03 06 00 B6 D3 05 00 05 20 00 00

Names Operation type Header

Color Balance B

Keystone_V

Keystone_H

Aspect

Picture

Position at

16 : 9 or Small

V.Position

H.Position

H.Size

H.Phase

Sharpness

Color

Tint

BNC

Video Format

HDTV

Get BE EF 03 06 00 45 D2 02 00 06 20 00 00

Increment BE EF 03 06 00 23 D2 04 00 06 20 00 00

Decrement BE EF 03 06 00 F2 D3 05 00 06 20 00 00

Get BE EF 03 06 00 B9 D3 02 00 07 20 00 00

Increment BE EF 03 06 00 DF D3 04 00 07 20 00 00

Decrement BE EF 03 06 00 0E D2 05 00 07 20 00 00

Get BE EF 03 06 00 E9 D0 02 00 0B 20 00 00

Increment BE EF 03 06 00 8F D0 04 00 0B 20 00 00

Decrement BE EF 03 06 00 5E D1 05 00 0B 20 00 00

Set

4:3 BE EF 03 06 00 9E D0 01 00 08 20 00 00

16:9 BE EF 03 06 00 0E D1 01 00 08 20 01 00

Small BE EF 03 06 00 FE D1 01 00 08 20 02 00

Get BE EF 03 06 00 AD D0 02 00 08 20 00 00

Default BE EF 03 06 00 62 D1 01 00 09 20 00 00 Bottom BE EF 03 06 00 F2 D0 01 00 09 20 01 00

Top BE EF 03 06 00 02 D0 01 00 09 20 02 00

Get BE EF 03 06 00 51 D1 02 00 09 20 00 00

Get BE EF 03 06 00 0D 83 02 00 00 21 00 00

Increment BE EF 03 06 00 6B 83 04 00 00 21 00 00

Decrement BE EF 03 06 00 BA 82 05 00 00 21 00 00

Get BE EF 03 06 00 F1 82 02 00 01 21 00 00

Increment BE EF 03 06 00 97 82 04 00 01 21 00 00

Decrement BE EF 03 06 00 46 83 05 00 01 21 00 00

Get BE EF 03 06 00 B5 82 02 00 02 21 00 00

Increment BE EF 03 06 00 D3 82 04 00 02 21 00 00

Decrement BE EF 03 06 00 02 83 05 00 02 21 00 00

Get BE EF 03 06 00 49 83 02 00 03 21 00 00

Increment BE EF 03 06 00 2F 83 04 00 03 21 00 00

Decrement BE EF 03 06 00 FE 82 05 00 03 21 00 00

Get BE EF 03 06 00 F1 72 02 00 01 22 00 00

Increment BE EF 03 06 00 97 72 04 00 01 22 00 00

Decrement BE EF 03 06 00 46 73 05 00 01 22 00 00

Get BE EF 03 06 00 B5 72 02 00 02 22 00 00

Increment BE EF 03 06 00 D3 72 04 00 02 22 00 00

Decrement BE EF 03 06 00 02 73 05 00 02 22 00 00

Get BE EF 03 06 00 49 73 02 00 03 22 00 00

Increment BE EF 03 06 00 2F 73 04 00 03 22 00 00

Decrement BE EF 03 06 00 FE 72 05 00 03 22 00 00

RGB BE EF 03 06 00 C2 D7 01 00 11 20 00 00

Component BE EF 03 06 00 52 D6 01 00 11 20 01 00

Get BE EF 03 06 00 F1 D7 02 00 11 20 00 00

Auto BE EF 03 06 00 9E 75 01 00 00 22 0A 00

NTSC BE EF 03 06 00 FE 71 01 00 00 22 04 00

PAL BE EF 03 06 00 6E 70 01 00 00 22 05 00

SECAM BE EF 03 06 00 6E 75 01 00 00 22 09 00

NTSC 4.43 BE EF 03 06 00 5E 72 01 00 00 22 02 00

M-PAL BE EF 03 06 00 FE 74 01 00 00 22 08 00

N-PAL BE EF 03 06 00 0E 71 01 00 00 22 07 00

Get BE EF 03 06 00 0D 73 02 00 00 22 00 00

1080i BE EF 03 06 00 F2 73 01 00 05 22 00 00

1035i BE EF 03 06 00 62 72 01 00 05 22 01 00

Get BE EF 03 06 00 C1 73 02 00 05 22 00 00

Command data

CRC Action Type Setting code

Command data chart

(continued)

Names Operation type Header

Sync on G

PinP Size

PinP Position

PinP Audio ch

PinP Input

WHISPER

GAMMA

Over Scan

MyScreen Size

MyScreen Lock

Lamp Time Get BE EF 03 06 00 C2 FF 02 00 90 10 00 00

Filter Time Get BE EF 03 06 00 C2 F0 02 00 A0 10 00 00

IR Remote Front

IR Remote Rear

IR Remote Top

Set

off BE EF 03 06 00 CB D0 01 00 08 30 01 00

on BE EF 03 06 00 5B D1 01 00 08 30 00 00

Get BE EF 03 06 00 68 D1 02 00 08 30 00 00

off BE EF 03 06 00 FE 22 01 00 00 23 00 00

Large BE EF 03 06 00 6E 23 01 00 00 23 01 00 Small BE EF 03 06 00 9E 23 01 00 00 23 02 00

Get BE EF 03 06 00 CD 22 02 00 00 23 00 00

Upper left BE EF 03 06 00 02 23 01 00 01 23 00 00

Upper right BE EF 03 06 00 92 22 01 00 01 23 01 00

Bottom left BE EF 03 06 00 62 22 01 00 01 23 02 00

Bottom right BE EF 03 06 00 F2 23 01 00 01 23 03 00

Get BE EF 03 06 00 31 23 02 00 01 23 00 00

RGB BE EF 03 06 00 BA 22 01 00 03 23 00 00

Video BE EF 03 06 00 2A 23 01 00 03 23 01 00

Get BE EF 03 06 00 89 22 02 00 03 23 00 00

Video BE EF 03 06 00 D6 22 01 00 02 23 01 00

S-Video BE EF 03 06 00 26 22 01 00 02 23 02 00

Get BE EF 03 06 00 75 23 02 00 02 23 00 00

NORMAL BE EF 03 06 00 3B 23 01 00 00 33 00 00

WHISPER BE EF 03 06 00 AB 22 01 00 00 33 01 00

Get BE EF 03 06 00 08 23 02 00 00 33 00 00

NORMAL BE EF 03 06 00 C7 F0 01 00 A1 30 00 00

CINEMA BE EF 03 06 00 57 F1 01 00 A1 30 01 00

DYNAMIC BE EF 03 06 00 A7 F1 01 00 A1 30 02 00

Get BE EF 03 06 00 F4 F0 02 00 A1 30 00 00

Large BE EF 03 06 00 C2 71 01 00 09 22 02 00

Middle BE EF 03 06 00 32 71 01 00 09 22 01 00

Small BE EF 03 06 00 A2 70 01 00 09 22 00 00

Get BE EF 03 06 00 91 70 02 00 09 22 00 00

Full BE EF 03 06 00 43 D6 01 00 12 30 00 00

X1 BE EF 03 06 00 D3 D7 01 00 12 30 01 00

Get BE EF 03 06 00 70 D6 02 00 12 30 00 00

off BE EF 03 06 00 3B EF 01 00 C0 30 00 00

on BE EF 03 06 00 AB EE 01 00 C0 30 01 00

Get BE EF 03 06 00 08 EF 02 00 C0 30 00 00

off BE EF 03 06 00 FF 32 01 00 00 26 00 00

on BE EF 03 06 00 6F 33 01 00 00 26 01 00

Get BE EF 03 06 00 CC 32 02 00 00 26 00 00

off BE EF 03 06 00 03 33 01 00 01 26 00 00

on BE EF 03 06 00 93 32 01 00 01 26 01 00

Get BE EF 03 06 00 30 33 02 00 01 26 00 00

off BE EF 03 06 00 47 33 01 00 02 26 00 00

on BE EF 03 06 00 D7 32 01 00 02 26 01 00

Get BE EF 03 06 00 74 33 02 00 02 26 00 00

CRC Action Type Setting code

Command data

REGULATORY NOTICES

FCC Statement Warning

WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

INSTRUCTIONS TO USERS: This equipment complies with the requirements of FCC (Federal Communication Commission) equipment provided that the following conditions are met. The cables may have to be used with the core set to the projector side. Use the cables which are included with the projector or specified.

Core

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

For the Customers in CANADA

NOTICE: This Class B digital apparatus complies with Canadian ICES-003.

Pour les utilisateurs au Canada

AVIS: Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.

Hitachi America, Ltd.

Computer Division 2000 Sierra Point Parkway, MS760 Brisbane, CA 94005-1835 Tel: +1-800-225-1741 Fax: +1-650-244-7776 www.hitachi.com/lcd.

Hitachi Canada, Ltd.

6740 Campobello Road, Mississauga, Ontario L5N2L8, Canada Tel: +1-905-821-4545 Fax: +1-905-821-1101

Hitachi Home Electronics (Europe), Ltd.

Dukes Meadow, Millboard Road, Bourne End , Buckinghamshire SL8 5XF UK Tel: +44-162-864-3000 Fax: +44-162-864-3400

Hitachi Home Electronics Europe Ltd

426 Bergensesteenweg, 1500 Halle, Belgium Tel: +32-2-363-9901 Fax: +34-2-363-9900

Hitachi Home Electronics Europe Ltd

Gewerbepark, Hintermattlistr, Postfach, 5506 Magenwil, Switzerland Tel: +41-62-889-8011 Fax: +41-62-896-4771

Hitachi Europe GmbH

Business Systems Division Via T. Gulli. 39, 20147 Milano, Italy Tel: +39-2-487861 Fax: +39-2-48786322

Hitachi Sales Europe GmbH

Business Systems Division Am Seestern 18, 40547 Dusseldorf, Germany Tel: +49-211-529-1551 Fax: +49-211-529-1594

Hitachi Business Systems (Nordic)

Brugata 14, N-0184 Oslo, Norway Tel: +47-2205-9060 Fax: +47-2205-9061

Hitachi Business Systems (Nordic)

Domnarvsgatan 29, Lunda, Box 62, S-163 91 Spanga, Sweden Tel: +46-8-621-8260 Fax: +46-8-761-6250

Hitachi Business Systems (Nordic)

Kuldyssen 13, DK-2630 Tåstrup, Denmark Tel: +45-43-99-9200 Fax: +45-43-99-9392

Hitachi Business Systems (Nordic)

Tapiolan Keskustorni 11 Krs. Fin-02100 Espoo, Finland Tel: +358-9-3487-1188 Fax: +358-9-455-2152

Hitachi France

Immeuble, 'Ariane', 18 Rue Grange Dame Rose, B.P. 134, 78148 Velizy, Cedex, France Tel: +33-1-34630542 Fax: +33-1-34650761

Hitachi Sales Iberica S A

Gran Via Carlos 111, 101, 1-1, 08028 Barcelona, Spain Tel: +34-3-330-8652 Fax: +34-3-339-7839

Hitachi Home Electronics Asia, (S) Pte Ltd.

16 Collyer Quay #20-00 Hitachi Tower Singapore 049318, Singapore Tel: +65-536-2520 Fax: +65-536-2521

Hitachi Sales (Malaysia) Sdn. Bhd.

Wisma Hitachi, No.2, Lorong 13/6A, 46200 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: +60-3-7573455 Fax: +60-3-7556090

Hitachi Sales (Thailand), Ltd.

994,996 Soi Thonglor, Sukhumvit 55 Road, Klongton, Klongtoey, Bangkok 10110, Thailand Tel: +66-2-381-8381 Fax: +66-2-381-9520

Hitachi (Hong Kong), Ltd.

8th Floor Park-in Commercial Centre, No.56, Dundas Street, Kowloon Bay, Kowloon, Hong Kong Tel: +852-2-7804351 Fax: +852-2-7804915

Hitachi Sales Corp. of Taiwan.

2nd Floor, No.65, Nanking East Road, Section 3, Taipei, Taiwan Tel: +886-2-516-0500 Fax: +886-2-516-1501

Hitachi Australia Ltd.

13-15 Lyonpark Road, North Ryde NSW 2113, Australia Tel: +61-2-9888-4100 Fax: +61-2-9888-4144

Hitachi, Ltd.

15-12, Nishi Simbashi 2-chome, Minato-ku, Tokyo, 105 Japan Tel: +81-3-3502-2111 Fax: +81-3-3506-1440

*QR55131*

Printed in Japan

Hitachi CP-X885W, CP-X880W User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual