Hitachi CG1426T User Manual
CG1426T
Instructions for use GB
Contents
Remote Control Buttons..................................................2
Control Panel Buttons.....................................................3
Connect Peripheral Equipment.......................................3
Connect Peripheral Equipment.......................................4
Via the Euroconnector...................................................4
Via Aerial Input...............................................................4
Decoder.........................................................................4
TV and Video Recorder.................................................4
Search for and store the test signal of the video
recorder.........................................................................4
Camera and Camcorder...............................................4
Connect the decoder to the video recorder...................4
Connecting Headphones..............................................4
Preparation......................................................................5
Features........................................................................5
Safety Precautions..........................................................5
Before Switching on your TV..........................................7
Power connection..........................................................7
Connections to the RF input socket..............................7
How to connect other devices.......................................7
Inserting batteries in the remote control handset.........7
Switching the TV ON/OFF.................................................7
To switch the TV on.......................................................7
To switch the TV off........................................................7
Operating the TV..............................................................7
A.P.S. (Automatic Programming System)......................7
Operating with the buttons on the TV set......................8
Operating with Remote Control....................................8
Menu System...................................................................8
Sound Menu..................................................................8
Picture Menu..................................................................9
Feature Menu..............................................................10
Install Menu.................................................................10
Programme Menu.......................................................11
Autostore.....................................................................11
Other Features...............................................................12
TV Status......................................................................12
Programme Swap (P<P).............................................12
Double-digit (- -)..........................................................12
Personal Preferences (PP).........................................12
Picture Mode................................................................12
Sleep Timer Last Minute Indicator..............................12
Mute Indicator..............................................................12
No-Signal....................................................................12
Blue Background During No-Signal............................12
Volume Bar..................................................................12
AV Modes.....................................................................12
Teletext...........................................................................13
To operate Teletext......................................................13
To select a page of Teletext.........................................13
To Select Index Page...................................................13
To Select Teletext with a TV Programme.....................13
Searching for a page while watching TV.....................13
To Select Double Height Text......................................13
To Reveal “concealed” Information.............................13
To Stop Automatic Page Change.................................13
To Select a Subcode Page..........................................13
Fastext.........................................................................13
To exit Teletext..............................................................14
To Display the Time.....................................................14
Tips.................................................................................14
Care of the Screen......................................................14
Poor Picture.................................................................14
No Picture....................................................................14
Sound..........................................................................14
Remote Control...........................................................14
No solution..................................................................14
Specifications................................................................14
GB - 1 -
Remote Control Buttons
= Stand By
I-II = No Function
0 - 9 = Direct Program
=Previous Programme
- - = Double Digit
= Info (Program Menu)
= Programme Up (Cursor Up)
= Cursor Right
-VOL / VOL + = Volume - / Volume +
Yellow (FEATURE) = Feature Menu
Blue (INSTALL) = Installation Menu
= External Source (AV-1, F-AV, RGB)
Teletext Buttons
= Teletext
= Update / Picture Mode Change (Auto / 4:3 / 16:9)
= Hold
= Index Page
= Reveal
= Expand
= Time
= Mix
= TV / Quit Menu
Red (SOUND) = Sound Menu
Green (PICTURE) = Picture Menu
= Programme Down (Cursor Down)
= Cursor Left
= Menu
= Change Picture Preset
= Mute
GB - 2 -
Control Panel Buttons
Aerial
External 1
Decoder
For Satellite Receiver
POWER = Power On / Off
- V + = Volume - / Volume +
- P + = Program - / Program +
Front AV input
AUDIO = Audio left (white)
VIDEO = VCR (yellow)
Headphone
Connect Peripheral Equipment
There is a wide range of audio and video equipment that can be connected to your TV.
The connection diagrams show the back of the TV where the different equipment should be connected.
REAR PANEL
ANT.IN
SCART 1
Camcorder
Audio
Headphone
Video
GB - 3 -
Connect Peripheral Equipment
There is a wide range of audio and video equipment that can
be connected to your TV.
The following connection diagrams show you where the different equipment should be connected at the rear side of the
TV.
Via the Euroconnector
Your TV set has a Euroconnector socket. If you want to connect
peripherals (e.g. video, decoder, etc.) which have Euroconnectors, to your TV, use SCART 1 input.
If an external device is connected via Euroconnector sockets
TV is switched to AV mode automatically. If the signal is RGB
then the RGB OSD indicator is displayed on the screen.
In AV mode if you press the “
displayed on the screen.
Via Aerial Input
If the equipment you want to connect to your TV e.g. video recorder or satellite receiver does not have a SCART socket, you
should connect it to the aerial (ANT) socket on your TV.
Decoder
Cable TV offers you a wide choice of programs. Most of them
are free, others are to be paid for by the viewer. This means
that you will need to subscribe to the broadcasting organization whose programmes you wish to receive. This organization will supply you with a corresponding decoder unit to allow
the programmes to be unscrambled.
For further information ask your dealer. See also the booklet
supplied with your decoder.
Connecting a decoder with an aerial socket to the TV
• Connect the aerial cable.
Connecting a decoder without an aerial socket to the
TV
• Connect the decoder to your TV with a SCART lead to
SCART 1. When your decoder has a SCART connector you
can obtain better picture quality if you connect a SCART lead
to EXTERNAL.
• Then select the appropriate AV mode by pressing the “
button.
” button the TV status OSD is
AV
Search for and store the test signal of the
video recorder
• Unplug the aerial cable from the aerial socket “ANT” of your
video recorder.
• Switch on your TV and put the video recorder on the test signal. (See the handbook for your video recorder.)
• Enter the Tuning menu via the Install menu.
• Search for the test signal of your video recorder in the same
way as you searched for and stored the TV signals. See
Tuning, Search and Store TV channels. Store the test signal
under programme number 0.
• Replace the aerial cable in the aerial socket “ANT” of your
video recorder once you have stored the test signal.
Camera and Camcorder
To connect to Front-AV input
Connect your camcorder to the front of your TV.
• Connect your equipment to the TV via VIDEO (yellow) and
AUDIO (white) inputs. You should connect the jacks to the in-
put of the same colour.
Connect the decoder to the video recorder
Some video recorders have a special SCART connector for decoder.
• Connect a SCART lead to the SCART connector of your decoder and to the special SCART connector of your video recorder. See also the handbook of your video recorder.
• To connect your video recorder to the TV, see TV and Video
Recorder section.
If you want to connect more equipment to your TV, consult your
dealer.
Connecting Headphones
Use the headphone socket of your TV, to connect headphones.
”
TV and Video Recorder
• If your video recorder has a SCART socket please connect
it to the TV using a SCART lead. Your TV should also be
connected to your video recorder using the aerial RF output
socket.
Please note using a SCART lead will produce better qualitiy
pictures.
GB - 4 -
Loading...