HITACHI 42PD7200(PW2), 42PD7A10(PW2), 42PD7200A(PW2), 42PD7A10A(PW2) Service Manual

SERVICE MANUAL
SM006
42PD7200(PW2)
42PD7A10(PW2)
42PD7200A(PW2) 42PD7A10A(PW2)
MANUEL D'ENTRETIEN WARTUNGSHANDBUCH
CAUTION:
Before servicing this chassis, it is important that the service technician read the “Safety Precautions” and “Product Safety Notices” in this service manual.
ATTENTION:
Avant d’effectuer l’entretien du châassis, le technicien doit lire les «Précautions de sécurité» et les «Notices de sécurité du produit» présentés dans le présent manuel.
VORSICHT:
Vor Öffnen des Gehäuses hat der Service-Ingenieur die „Sicherheitshinweise“ und „Hinweise zur Produktsicherheit“ in diesem Wartungshandbuch zu lesen.
Data contained within this Service manual is subject to alteration for improvement.
Les données fournies dans le présent manuel d’entretien peuvent faire l’objet de modifications en vue de perfectionner le produit.
Die in diesem Wartungshandbuch enthaltenen Spezifikationen können sich zwecks Verbesserungen ändern.
SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT
Plasma Television
March 2005
42PD7200 (PW2)
CAUTION FOR SAFETY
Please read this page before repair the monitor. This page explains to following items for keep the safety of set and prevent to accident during repair work.
We explain by symbol at happen the damage or injury when took wrong repair.
Warning
Caution
We made the symbol as below, which are kind of following items.
This symbol means "CAUTION"
This symbol means "POSSIBLE to
ELECTRIC SHOCK"
This symbol means "possible to die or heavy damage"
This symbol means "possible to damage or something will break"
This symbol means "MUST"
This symbol means "DO NOT"
WARNING
Should be follows to instructions.
We indicates to cabinet, chassis and parts
by label, which are special attention part.
Please follow to note and [Safety Instructions]
of User’s Manual.
Prevent the electric shock.
Please take care during working because
monitor has high voltage part and power
supply part.
Possible to die if you tough to these place
by miss take.
Please disconnect power plug during
overhaul, reassemble or change parts.
You will die or take damage by electric
shock if you touch to live part.
Use recommended components.
Please use to same characteristic compo-
nent, which is same as previous for your
safety and keep reliability especially marked
in parts list and circuit diagram.
by
It is reason of electric shock or fire if you
use non-recommended component.
Should be kept same style of wiring or component.
Monitor uses tubes or tapes, which made
by insulator, and some components are
keep distance from surface of PWB for
safety.
Internal leads kept from hot part or high voltage
part by clamper or styling, so please return to
original condition for prevent to electric shock
or fire.
Should be done safety check after finished.
Every part (removed screws, component
and wiring) should be returned to previous
condition.
Check around repair position for make
damage by miss take and measure the
insulated impedance by meg-ohm meter.
Confirm the value of impedance, that
value is more than 4M ohm.
It is reason for electric shock or fire if that
value is less than 4M ohm.
Nobody can check and repair to the code and combination circuit of HDCP.
Never remove the shield case, which is
assembled to the code and combination
circuit of HDCP.
1
42PD7200 (PW2)
PRECAUTIONS
How to clean the plasma screen panel of the monitor
Before cleaning the monitor, turn off the monitor and disconnect the power plug from the power outlet. To prevent scratching or damaging the plasma screen face, do not knock or rub the surface with sharp or hard objects. Clean the screen with a soft cloth moistened with warm water and dry with a soft cloth. If it is not enough, then use a cloth with mild detergent. Do not use harsh or abrasive cleaners.
How to clean the cabinet of the monitor
Use a soft cloth to clean the cabinet and control panel of the monitor. When excessively soiled dilute a neutral detergent in water, wet and wring out the soft cloth and afterward wipe with a dry soft cloth. Never use acid/alkaline detergent, alcoholic detergent, abrasive cleaner, powder soap, OA cleaner, car wax, glass cleaner, etc. especially because they would cause discoloration, scratches or cracks.
1. Features
Large-screen, high-definition plasma display panel
The 42-inch color plasma display panel, with a resolution of 1024 (H) x 1024 (V) pixels, creates a high-definition, large-screen(aspect ratio : 16:9) and low-profile flat display. Free from electromagnetic interferences from geomag­netic sources and ambient power lines, the panel produces high-quality display images free from color misconver­gence and display distortion.
High Performance Digital Processor
A wide range of input signals can be handed,including composite, component,and HDMI.High Definition Digital Pro­cessor creates the fine-textured image with dynamic contrast. In addition, it corresponds to a broad array of per­sonal computer signals, from 640 x 400 and 640 x 480 VGA to 1600 x 1200 UXGA.(Analog Input)
Easy-to-use remote control and on screen display system
The remote control included eases the work of setting display controls. Further, the on-screen display system, displays the status of signal reception and display control settings in an easy-to-view fashion.
Power saving system
When connected to a VESA DPMS-compliant PC, the monitor cuts its power consumption while it is idle.
Connecting to an Audio Visual Device
1
• Three SCART terminals, a composite/S Terminal*
added. A composite video output terminal is also provided as a monitoring output.
*1
A composite/S terminal = A side input
• A wide range of devices other than personal computers can also be connected.
• A RGB input is possible to switch to component signal from the Menu screen.
Power Swivel Feature
It allows to turn the plasma display left or right within ± 30 degree using the remote control.
, a component terminal*2, a HDMI terminal and have been
2
2. Specifications
42PD7200 (PW2)
Display
Panel
Net dimensions (excluding Speakers/Stand)
Net weight (excluding Speakers/Stand)
Ambient conditions
Power supply
Power consumption/at standby
Audio output
(RGB input)
Input terminals
Input signals
Sync signals
(Video input)
Input terminals
Input signals
Output Signal
(RF input)
Input terminals
dimensions Resolution
Temperature
Relative humidity
Approx. 42 inches (922 (H) x 522 (V) mm,
1024(H) x 1024 (V) pixels
1050 (W) x 676 (H) x 110 (D) mm
37.0kg
Operating : 5˚C to 35˚C, Storage : 0˚C to 40˚C
Operating : 20% to 80%, Storage : 20% to 90% (non-condensing)
AC100 - 240V, 50/60Hz
380W / <3W
speaker 12W + 12W (6Ω)
RGB1 DVI input terminal (DVI-D) RGB1 audio input terminal (3.5mm Stereo Mini Jack) RGB2 analog RGB input terminal (D-sub 15-pin) RGB2 audio input terminal (3.5mm Stereo Mini Jack)
0.7 V/1.0 Vp-p, analog RGB (Recommended Signal) 480i, 576i, 480p, 576p, 1080i/50, 1080i/60, 720p/50*
H/V separate, TTL level [2KΩ] H/V composite, TTL level [2KΩ] Sync on green, 0.3 Vp-p [75 Ω]
AV1: composite video/S video/L/R audio input terminal (SCART) AV2: composite video/RGB/L/R audio input terminal (SCART) AV3: composite video/RGB/L/R audio input terminal (SCART) AV4: composite video/Y/P AV5: composite video/S video/L/R audio input terminal (RCA) AV6: HDMI input terminal
AV1: PAL, SECAM, NTSC3.58, NTSC4.43 AV2: PAL, SECAM, NTSC3.58, NTSC4.43, RGB AV3: PAL, SECAM, NTSC3.58, NTSC4.43, RGB AV4: PAL, SECAM, NTSC3.58, NTSC4.43 AV4: 480i, 576i, 480p, 576p, 720p/50, 720p/60, 1080i/50, 1080i/60, AV5: PAL, SECAM, NTSC3.58, NTSC4.43 AV6: HDMI input signal
OUTPUT (MONITOR): composite video monitor-output terminal (RCA) OUTPUT (MONITOR): L/R audio monitor- output terminal (RCA) OUTPUT (HEADPHONE): L/R audio monitor- output terminal (
ANT : 75Ω Unbalanced
B/PR video/L/R audio input terminal (RCA)
diagonal 1059mm)
1
, 720p/60
3.5mm Stereo Mini Jack)
RF Video System
1
*
720/50 is supported by RGB1(DVI-STB)
2
The SECAM D,K system might not be normally received, depending on the model.
*
PAL B, G, H / I / D, K SECAM B, G / K1 / L, L’ / (D, K)*
Applicable video signals for each input terminal
Terminal RCA/S-video/SCART DVI D-sub
Signal CVBS S-video Component SCART (RGB) PC STB RGB Component
AV1
AV2
AV3
AV4
AV5
AV6
RGB1
RGB2
3
2
HDMI
( :Available)
42PD7200 (PW2)
3. Service points
Lead free solder
This product uses lead free solder (unleaded) to help preserve the environment. Please read these instructions before attempting any soldering work.
Caution: Always wear safety glasses to prevent fumes or molten solder from getting into the eyes. Lead free
solder can splatter at high temperatures (600˚C).
Lead free solder indicator
Printed circuit boards using lead free solder are engraved with an "F."
Properties of lead free solder
The melting point of lead free solder is 40-50˚C higher than leaded solder.
Servicing solder
Solder with an alloy composition of Sn-3.0Ag-0.5Cu or Sn-0.7Cu is recommended. Although servicing with leaded solder is possible, there are a few precautions that have to be taken. (Not taking these precautions may cause the solder to not harden properly, and lead to consequent malfunctions.)
Precautions when using leaded solder
Remove all lead free solder from soldered joints when replacing components.
If leaded solder should be added to existing lead free joints, mix in the leaded solder thoroughly after the lead
free solder has been completely melted (do not apply the soldering iron without solder).
Servicing soldering iron
A soldering iron with a temperature setting capability (temperature control function) is recommended. The melting point of lead free solder is higher than leaded solder. Use a soldering iron that maintains a high stable temperature (large heat capacity), and that allows temperature adjustment according to the part being serviced, to avoid poor servicing performance.
Recommended soldering iron:
Soldering iron with temperature control function (temperature range: 320-450˚C)
Recommended temperature range per part:
Part Soldering iron temperature
Mounting (chips) on mounted PCB 320˚C±30˚C
Mounting (chips) on empty PCB 380˚C±30˚C
Chassis, metallic shield, etc. 420˚C±30˚C
The PWB assembly which has used lead free solder
FILTER PWB, SW PWB, LED/RECEIVER PWB, SP TERMINAL(L/R) PWB
AUDIO PWB, JOINT PWB, Swievel PWB, HDMI PWB, control PWB
VIDEO PWB
TUNER PWB
Readjustment Power supply voltage When a PANEL or a Power Unit is exchanged, power supply voltage needs to be adjusted. Please adjust to
make the values of Va and Vs of as should on the label currently stuck on the panel back upper parts.Adjust­ment is performed by VR in the power supply unit. Please refer to the procedures of “Va” and “Vs” adjustments on 23page.
4
4. Component names
[Main unit]
Control panel
• Adjustment buttons are located on the bottom.
• The back cover is provided with indications to distinguish the adjustment buttons.
+
-
VOLUME UP/DOWN buttons ( ADJUST buttons)
SUB-POWER button
• ( ) indicates the function while the MENU is displayed on the screen.
SELECT button
SELECT button
42PD7200 (PW2)
MENU button
INPUT SELECT button
(OK button)
Remote-control receiver
Indicating lamp
• The main power switch is located at the back, on the lower surface.
Main power switch
[Remote control]
POWER button
INPUT SELECT buttons
MENU button
OK button
SOUND MODE button
VOLUME UP/DOWN button
PROGRAM SELECT buttons
(TV)
MULTI MODE button
T/TEXT button
(TV)
RECALL button
FUNCTION SELECT button
DVD CONTROL buttons
FREEZE/RETURN button
SELECT/ADJUST button
PICTURE MODE button CH I/CH II button (TV)
CHANNEL UP/DOWN button (TV) MUTE button
MULTI PICTURE button
SWIVEL button
CLE-960
5
42PD7200 (PW2)
5. New adoption technology
[System control micom I001(M30627)]
Pin function table
No. PIN MANE I/O
1
2
3
4
5
6
7
8 DATA_OUT(FC)
9 DATA_IN(FC)
10 CLK(FC)
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
VREF (+5.0V) I
+5.0V I
NC I/O
OSD_DATA I/O
OSD_CLK I/O
HP_VOL
FE.AGC_O(M) I/O
EDID_PROTECT I/O
TRAP_MAIN I/O
GND I
CNVSS(FLASH) I
DSUB COMP I/O
RGBSW I/O
RESET I
16MHz oscillation O
GND I
16MHz oscillation I
+5.0V I
NMI(+5.0V) I
RMCON(AVC) I/O
V.FREQ_2(VIDEO) I/O
V.FREQ_1/3 I/O
SCV.SYNC I/O
IRQPM-IRQ) I/O
MCV.SYNC I/O
POWER_LED I/O
H.FREQ_2(VIDEO) I/O
PDP_WVGA_LCD_SW_2 I/O
H.FREQ_1/_3 I/O
PDWN
RXD2 I/O
TXD2 I/O
TXD1(RS232C/FLASH) I/O
RXD1(RS232C/FLASH) I/O
SCLK(FLASH) I/O
BUSY(FLASH) I/O
TXD0(PDP) I/O
RXD0(PDP) I/O
SDA4(panel) I/O
SCL4(panel) I/O
M_ENABLE I/O
M_SCLK I/O
M_SDA I/O
M_WAKEUP I/O
PDPGO(PM_ON) I/O
5V
5V
NC
OSD DATA
OSD CLK
Head Phone Volume
I/O
AGC Voltage(F/E) FC DATA
I/O
FC DATA
I/O
FC CLOCK
I/O
Memory Protect
TRAP-MAIN GND
CNVSS(FLASH)
SYNC-SW
SYNC-SW
RESET
OSC-OUT
GND
OSC-IN
5V
5V PULL UP
IR Signal
TA1370(LA7213), COMPONENT2
TA1370(LA7213), COMPONENT(Main)/ DSUB COMPONENT
CVBS for SYNC Detection(Sub Picture)
PANEL MODULE Condition(L:Normal,H:Erroe)
CVBS for SYNC Detection(Main Picture) LLED ON(Power Save)
TA1370(LA7213), COMPONENT2
PDP/42WVGA/LCD detection
TA1370(LA7213), COMPONENT1(Main), D-SUB
I/O
RESERVE(LVDS Power Down mode(PANEL)) DTT
DTT
DATA(RS-232C)
5V
I
DATA(RS-232C)
GND
I
CLOCK(FRASH MEMORY Writing)
BUSY(FRASH MEMORY Writing)
Ether Net
Ether Net
2
I
C-BUS Contorol DATA
2
I
C-BUS Contorol CLOCK
Media Enable
Media Clock
Media Data
Media Wakeup
PDP PALEL Contorol
FUNCTION
6
42PD7200 (PW2)
No. PIN MANE I/O FUNCTION
CPUGO(PM_CPU) I/O
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
EPM (FLASH) I/O
VIDEO.DET_1 I/O
SCL1 I/O
SDA1 I/O
HDMI-RESET I/O
HDMI-HPD_RESET I/O
VIDEO.DET_2 I/O
VIDEO.DET_3 I/O
TUNER.DET_1 I/O
CE (FLASH) I/O
STAND.CIR_DET I/O
SW_L_OUT I/O
SW_R_OUT I/O
M_SW I/O
INITIALIZE I/O
D.RESET(DARST) I/O
DVI-PD I/O
SCDT I/O
HS-DJTR I/O
DVI-SW I/O
CUR_PRTCT I/O
SPRLY I/O
MUTE I/O
ASEL1 I/O AUDIO Signal SW
ASEL2 I/O AUDIO Signal SW
SDA2 I/O
SCL2 I/O
D-SUB COMP_SYNC.SW I/O
BM_SW I/O
RGB_BLK_2 I/O NC
RGB_BLK_3 I/O NC
AUD RST I/O
PDP_WVGA_LCD_SW_1 I/O
+5.0V I
RGB1_DET I/O NC
GND I
WSS_1 I/O NC
WSS_2 I/O NC
WSS_3 I/O NC
TV.AFC(S) I/O AFC Voltage(Sub TUNER)
TV.AFC(M) I/O
FE_AGC_I(M) I/O AGC Voltage(Main TUNER)
FE_AGC_I(S) I/O
HP_DETECT I/O
HDMI_DET I/O
INT_HDMI I/O
NC I/O NC
COMP_SW I/O
DEMP_OUT I/O
PDP PALEL Contorol
FRASH MEMORY Writing
Detecting VIDEO PWB I2C䋨to PWB TUNER side䋩 FE/MSP3455or MSP3415G/SAA5361/TB1274(Sub)/M306V7/M62320P I2C䋨to PWB TUNER side䋩 FE/MSP3455or MSP3415G/SAA5361/TB1274(Sub)/M306V7/M62320P
HDMI-Reset
Hot Plug Detect Reset
Detecting VIDEO PWB
Detecting VIDEO PWB
Detecting TUNER PWB FRASH MEMORY Writing
Detecting SWIVEL PWB
SWIVEL(L-output)
SWIVEL(R-output) Discriminate terminal of bridge media circuit connecting.
Initializing EEPROM
RESET(DVI)
DVI Contorol
DVI Contorol
DVI Contorol
DVI Contorol
Detecting Powre-SWIVEL SP ON/OFF Relay Control
MUTE
I2C(NJW1163,AD7414,TA1370)
I2C(NJW1163,AD7414,TA1370)
SYNC-SW BM switch
RESET for LIPSYNC IC
PDP/42WVGA/LCD detection
GND
AFC Voltage(Main TUNER)
AFC Voltage(Sub TUNER)
HEAD PHONE DETECT
HDMI 5V DET
INT(HDMI)
Component SW Main DSUB
deemphasis control output for HDMI
7
42PD7200 (PW2)
No. PIN MANE I/O FUNCTION
101
102
103
104
105
106
107
108
109
110
111
CONTROL I/O
SCL0 I/O
SDA0 I/O
SCL3(EEPROM) I/O
SDA3(EEPROM) I/O
HDMI_CIR_DET I/O
EXT_RESET I/O
OSD_CS I/O
FC_ENABLE I/O
NC I/O
NC I/O
112 IRQ_DTT
113 DTT_POWER
114 DISPEN
115
116
117
HDMI_A_SW I/O
SCL5 I/O
SDA5 I/O
118 FUNC_1
119 FUNC_2
120 NC
121
122
123
124
125
126
127
128
AD_KEY3 I/O
AD_KEY2 I/O
AD_KEY1 I/O
TV.POWER I/O
DIP.DET I/O
POWER_SAVE I/O
GND I
FAN_ALARM *1 I/O
LCD PANEL
2
C-BUS Contorol CLOCK
I
2
I
C-BUS Contorol DATA
I2C-BUS Contorol CLOCK
I2C-BUS Contorol DATA
Detecting HDMI circuit connection
EXTERNAL RESET
OSD CS
FC ENABLE
NC
NC
DTT IRQ
I/O
DTT POWER
I/O
DISPEN
I/O
HDMI AUDIO SW
2
I
C-BUS Contorol CLOCK
2
I
C-BUS Contorol DATA
I/O
Function 1
I/O
Function 2
I/O NC
AD KEY3**
AD KEY2*
AD KEY1(INPUT) POWRE ON/OFF(H:ON䇮L:STANDBY)
DIP DET POWRE ON/OFF(L䋺ON(STANDBY䍃POWRE SAVE), H䋺OFF)
GND
FAN ALARM
8
Block diagram
42PD7200 (PW2)
9
42PD7200 (PW2)
6. Adjustment
● How to get to Adjustment mode
Using the front control buttons with the set turned off (standby) can activate it.
Press the SUB-POWER( ) button, INPUT SELECT( ) button and button at the same time, and hold for
more than 5 seconds.
The set turns on in adjustment mode with OSD.
● Changing data and Selecting Adjustment code
When the set is in adjustment mode, the cursor , , , and OK buttons of the remote control or front panel
may be used as the adjustment keys.
, buttons are used for selecting adjustment code.
, buttons are used for changing data values.
OK button is used for confirming the data.
After finishing the necessary adjustment press MENU button. Adjustment mode is released and the set returns to
normal condition.
● Memory Initialize operation
NOTE: The execution of this function returns the adjustment codes to the preset values, therefore, adjustment
data will be lost.
Procedure
(1) Enter Adjustment Mode.
(2) Select MEMORY INIT adjustment code (No.658) and change the data value from 0 to 1.
(3) Activate MEMORY INIT by pressing OK button for more than 3 seconds.
(4) Select No.525 and change data value from 1 to 0.
(5) Check that the receiving channel goes to P1. Unit is set to preset values.
10
42PD7200 (PW2)
_
)
_
)
e
_
)
e
_
)
e
_
)
e
_
)
e
_
)
r
r
)
)
)
)
p
)
p
)
p
)
e
play
l
play
l
(
)
e
(
)
e
(
)
g
e
g
)
g
)
y
o
(
t
(
)
(
)
(
)
(
)
p
p
p
)
p
p
p
p
p
p
A
p
p
p
e
p
e
)
p
e
p
e
p
p
e
p
p
A
p
p
p
e
p
e
p
p
e
p
[
]
e
[
]
[
]
)
[
]
[
]
[
]
[
]
[
]
[
]
)
[
]
[
]
p
[
]
p
(
)[
]
/
p
(
)[
]
p
[
]
/
p
[
]
p
g
]
/
p
g
]
p
(
]
/
p
(
]
p
q
]
/
p
q
]
p
[
]
[
]
p
[
]
/
p
[
]
p
g
]
/
p
g
]
p
p
]
p
]
p
p
t
p
p
t
p
p
t
0
p
t
0
p
t
p
p
t
p
p
]
A
p
]
A
p
]
0
p
]
0
p
]
p
p
]
p
p
)
Service adjustment items by I
ADJ Function Max. Default
No value FORMATTER VIDEO TUNER PDP
CONTRAST(RF
0SUB 1SUB
CONTRAST(AV1
2SUB
CONTRAST(AV2
3SUB
CONTRAST(AV3 CONTRAST(AV4
4SUB 5SUB
CONTRAST(AV5
6SUB
CONTRAST(RF 7 Sub Colo 8 Sub Colo 9 TINTRF
10 TINT㧔VIDEO 11 TINTRF 12 TINT㧔VIDEO 13 Free 14 Free 15 Free 16 Free 17 Reference Am 18 Reference Am 19 Reference Am 20 Dis 21 Dis 22 Offset Value 23 Offset Value 24 Offset Value 25 Ter 26 Ter 27 Set Blue Gamma 28 Contrast mode<D 29 Select for WIDE Mode 11 30 PinP Function 31 Black Level 32 Black Level 33 Black Level 34 Black Level 35 YNR In 36 YNR In 37 YNR In 38 YNR In 39 YNR In 40 YNR In 41 YNR In 42 YNR In 43 CNR In 44 CNR In 45 CNR In 46 CNR In 47 CNR In 48 CNR In 49 CNR In 50 CNR In 51 CNR In 52 CNR In 53 main/sub YFRNR level 54 main/sub YFRNR level 55 main/sub YFRNR level 56 main/sub YFRNR level 57 main/sub YFRNR level 58 main/sub YFRNR level 59 main/sub CFRNR level 60 main/sub CFRNR level 61 main/sub CFRNR level 62 main/sub CFRNR level 63 main/sub CFRNR level 64 main/sub CFRNR level 65 B-Y/BޔR-Y/R 66 B-Y/BޔR-Y/R 67 DSB Gain of Vertical for B-Y/BޔR-Y/R 68 DSB Gain of Vertical for B-Y/BޔR-Y/R 69 DSB corin 70 DSB corin 71 B-Y/BޔR-Y/R 72 B-Y/BޔR-Y/R 73 Horizontal HPF Peek Fre 74 Horizontal HPF Peek Fre 75 Horizontal Enhancer Gain for B-Y/B,R-Y/R 76 Horizontal Enhancer Gain for B-Y/B,R-Y/R 77 Horizontal DSB Gain for B-Y/B,R-Y/R 78 Horizontal DSB Gain for B-Y/B,R-Y/R 79 Horizontal DSB Corin 80 Horizontal DSB Corin 81 Horizontal Enhancer Cli 82 Horizontal Enhancer Cli 83 B-Y Clam 84 R-Y Clam 85 B-Y Clam 86 R-Y Clam 87 B-Y Clam 88 R-Y Clam 89 B-Y Clam 90 R-Y Clam 91 B-Y Clam 92 R-Y Clam 93 B-Y Clam 94 R-Y Clam 95 P/N ID Main 1 0 96 P/N ID Sub 1 0 97 Shar 98 Free 99 Free
litude(RGB_AMP litude(RGB_AMP
litude(RGB_AMP for Max. Amplitude Leve for Max. Amplitude Leve
+/-) of Upper Limit (for FC :RGB-AMP +/-) of Upper Limit (for TB1274:SUB-CONT
+/-) of Upper Limit (for TB1274:Sub Color et value of White peak Adj. Single Picture mod et value of Color Level Adj.(for TB1274:Sub Color
ness Gain(RF/NR
ain On/Off 0:Off, 1:On(For 55V
namic> SW (TV) 0:Dynamic, 1:Dynamic+Aut
for PC) 0:PinP, 1:Infomation1, 2:Infomaiton Spli RGB_AMP RGB_AMP RGB_AMP RGB_AMP
ut Level for AV1-5 Mode RF 7 7 ut Level for AV1-5 Mode VIDEO 7 7 ut Level for AV1-5 Mode Scart-RGB(50/60Hz ut Level for AV1-5 Mode 480i/576i 7 7 ut Level for AV1-5 Mode 480p/576 ut Level for AV1-5 Mode 1080i-50/60/720 ut Level for DVI-STV Mode 480i/480p/576i/576p/VG ut Level for DVI-STV Mode 1080i-50/60/720 ut Level at Low level for AV1-5 Mod ut Level at Low level for AV1-5 Mod ut Level at Low level for AV1-5 Mod ut Level at Low level for AV1-5 Mod ut Level at Low level for AV1-5 Mod ut Level at Low level for DVI-STV Mode 480i/480p/576i/576p/VG ut Level at Low level for DVI-STV Mode 1080i-50/60/720 ut Level at Low level for Dsub Comp. Mod ut Level at Low level for Dsub Comp. Mod ut Level at Low level for Dsub Comp. Mod
VER. Enhancer Gain
VER. Enhancer Gain
of Vertical for B-Y/BޔR-Y/R[CVDSBC0 of Vertical for B-Y/BޔR-Y/R[CVDSBC1
VRE. Enhancer) CLIP 0:CTI[CVECLP0
VRE. Enhancer) CLIP 0:CTI[CVECLP1
offse offse offse offse offse offse offset[DVI-STB offset[DVI-STB offset[DVI-STB offset[DVI-STB offset[DVI-STB offset[DVI-STB
ADJ. Items Mode PWB PWB PWB PANEL
MYNRP0 MYNRP5 MYNRP6' MYNRP6 MYNRP7 MYNRP8 MCNRP0 MCNRP5 MCNRP6' MCNRP6 MCNRP7 MCNRP8
. SW for B-Y/B,R-Y/R[CHHPF0 . SW for B-Y/B,R-Y/R[CHHPF1
for B-Y/B,R-Y/R[CHDSBC0 for B-Y/B,R-Y/R[CHDSBC1
for B-Y/B,R-Y/G 0:CTI[CHECLP0 for B-Y/B,R-Y/G 0:CTI[CHECLP1
CVEG0
CVEG1 CVDSBG0 CVDSBG1
CHEG0
CHEG1 CHDSBG0 CHDSBG1
2
C-bus control (MAIN Part)
Main 15 8 Main/Sub Composite mod Main/Sub Composite mod Main/Sub Composite mod Main/Sub Composite mod Main/Sub Composite mod Sub 15 8 Main 15 8 Sub 15 8 Main 63 33 Main 63 33 Sub 63 33 Sub 63 33
RF/VIDEO 254 127 PC 254 127 Multi Picture mod Main - ­Sub - ­Multi Picture mod Single Picture mod
For 55V 1 1 RF 1 1
RF/VIDEO 254 127 PC 254 127 HDMI 254 127 For USA NTSC/480i 254 127
RF/VIDEO 7 4 Scart-RGB(50/60Hz 480i/576i 7 4 480p/576 1080i-50/60/720
480i/576i 7 2 480p/576 1080i-50/60/720 NTSC/PAL/ޓMultipictur NTSC/PAL-VIDEO 7 0 Scart-RGB(50/60Hz 480i/576i(Except HDMI) 480p/576p(Except HDMI) 1080i-50/60/720p(Except HDMI) NTSC/PAL/ 7 0
Multi NTSC/PAL-VIDEO 7 0 Scart-RGB(50/60Hz 480i/576i 7 0 480p/576 1080i-50/60/720 NTSC/PAL/480i/576i 480p/576p/1080i-50/60/720 NTSC/PAL/480i/576i 480p/576p/1080i-50/60/720 NTSC/PAL/480i/576i 480p/576p/1080i-50/60/720 NTSC/PAL/480i/576i 480p/576p/1080i-50/60/720 NTSC/PAL/480i/576i 480p/576p/1080i-50/60/720 NTSC/PAL/480i/576i/ޓMultipicture15 15 480p/576p/1080i-50/60/720 NTSC/PAL/480i/576i 480p/576p/1080i-50/60/720 NTSC/PAL/480i/576i 480p/576p/1080i-50/60/720 NTSC/PAL/480i/576i/ޓMultipicture10 480p/576p/1080i-50/60/720 NTSC/PAL/480i/576i/480p/576 NTSC/PAL/480i/576i/480p/576 1080i-50/6 1080i-50/6 720 720 480i/576i/480p/576p/VG 480i/576i/480p/576p/VG 1080i-50/6 1080i-50/6 720 720
Main/Sub 15 2
ޓMulti
icture15 15
ޓMulti
icture30
Multi
icture70
ޓ
ޓMulti
icture10
ޓMulti
icture32
ޓMulti
icture30
ޓMulti
icture70
15 8 15 8 15 8 15 8 15 8
254 130
18 2 18 2
18 2 237 235 237 235
20
77
77 77 77 77
74
74 74 72 72
72 72 71
70 70 70 70
70
70 70
15 9
30
70
10
32
15 9
30
70
10 255 128 255 128 255 128 255 128 255 128 255 128 255 128 255 128 255 128 255 128 255 128 255 128
 : shoule be adjusted should be followed previous data
Changed Component
11
42PD7200 (PW2)
p
p
p
p
p
p
p
p
p
p
p
)
p
p
p
p
p
p
p
p
p
p
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
_Q(
)
_f0(
)
_
)
p
(RF)
_DL(
)
_DL(
)
_DL(
)
_DL(
)
_DL(
)
_DL(
)
_DL(
)
_DL(L)
_DL(L')
_DL(
)
_DL(
)
_DL(
)
_DL(
)
_DL(
)
_DL(
)
_DL(
)
_DL(
)
_DL(
)
_DL(
)
_DL(L)
_DL(L')
_DL(
)
_DL(
)
_DL(
)
(
)
 : shoule be adjusted
ADJ Function Max. Default
No value FORMATTER VIDEO TUNER PDP
100 Free 101 Free 102 Free 103 Free 104 Free 105 Free 106 Free 107 Free 108 Free 109 Free 110 Shar
ness Gain(RF) BG/DK/I Sub 15 8 ness Gain(RF) M Sub 15 8
111 Shar 112 Shar
ness Gain(RF) L Sub 15 8 ness Gain(RF) L' Sub 15 8
113 Shar 114 Shar
ness Gain(VIDEO) PAL Sub 15 8
115 Shar
ness Gain(VIDEO) NTSC3.58 Sub 15 8 ness Gain(VIDEO) SECAM,B/W Sub 15 8
116 Shar
ness Gain(VIDEO) NTSC4.43 Sub 15 8
117 Shar 118 Shar
ness Gain(VIDEO) N-PAL Sub 15 8
119 Shar
ness Gain(VIDEO) M-PAL Sub 15 8
120 Shar
ness Gain(S.VIDEO
121 Free
ness f0(RF) BG/DK/I Main/Sub 3 2
122 Shar 123 Shar
ness f0(RF) M Main/Sub 3 2 ness f0(RF) L Main/Sub 3 2
124 Shar
ness f0(RF) L' Main/Sub 3 2
125 Shar 126 Shar
ness f0(VIDEO) PAL Main/Sub 3 2 ness f0(VIDEO) NTSC3.58 Main/Sub 3 2
127 Shar 128 Shar
ness f0(VIDEO) SECAM,B/W Main/Sub 3 2 ness f0(VIDEO) NTSC4.43 Main/Sub 3 2
129 Shar 130 Shar
ness f0(VIDEO) N-PAL Main/Sub 3 2 ness f0(VIDEO) M-PAL Main/Sub 3 2
131 Shar 132 Free 133 Y Out Level M 134 Y Out Level B/G 135 Y Out Level D/K 136 Y Out Level I 137 Y Out Level L 138 Y Out Level L' 139 Y Out Level 140 Y Out Level 141 Free 142 Y Out Level M 143 Y Out Level B/G 144 Y Out Level D/K 145 Y Out Level I 146 Y Out Level L 147 Y Out Level L' 148 Y Out Level 149 Y Out Level 150 Free 151 C Out Level M 152 C Out Level B/G 153 C Out Level D/K 154 C Out Level I 155 C Out Level L 156 C Out Level L' 157 C Out Level 158 C Out Level 159 Free 160 C Out Level M 161 C Out Level B/G 162 C Out Level D/K 163 C Out Level I 164 C Out Level L 165 C Out Level L' 166 C Out Level 167 C Out Level 168 Free 169 BPF 170 BPF
TRAP_SW(COMB=OFF-PAL/NTSC4.43/NTSC3.58
171 C 172 LPF Main/Sub 1 0 173 SECAM D-Tra 174 FILTER SW 175 Y 176 Y 177 Y 178 Y 179 Y 180 Y 181 Y 182 Y 183 Y 184 Y 185 Y 186 Y 187 Y 188 Y 189 Y 190 Y 191 Y 192 Y 193 Y 194 Y 195 Y 196 Y 197 Y 198 Y 199 NTSC Comb
4.5
5.5
6.5
6.0
6.5
6.5 VIDEO TEXT
4.5
5.5
6.5
6.0
6.5
6.5 VIDEO TEXT
4.5
5.5
6.5
6.0
6.5
6.5 VIDEO TEXT
4.5
5.5
6.5
6.0
6.5
6.5 VIDEO TEXT
4.43MHz
4.43MHz
4.5MHz
5.5MHz PAL/NTSC4.43
5.5MHz SECAM
6.0PAL/NTSC4.43
6.0SECAM
6.5PAL/NTSC4.43
6.5SECAM
VIDEOޓPAL/NTSC4.43 VIDEOޓSECAM VIDEOޓNTSC
4.5MHz
5.5MHz PAL/NTSC4.43
5.5MHz SECAM
6.0PAL/NTSC4.43
6.0SECAM
6.5PAL/NTSC4.43
6.5SECAM
VIDEOޓPAL/NTSC4.43 VIDEOޓSECAM VIDEOޓNTSC
Comb off
ADJ. Items Mode PWB PWB PWB PANEL
Sub 15 10
Main 63 15 Main 63 13 Main 63 16 Main 63 14 Main 63 13 Main 63 16 Main 63 15 Main 63 0
Sub 63 19 Sub 63 13 Sub 63 12 Sub 63 13 Sub 63 12 Sub 63 15 Sub 63 13 Sub 63 4
Main 63 7 Main 63 7 Main 63 7 Main 63 7 Main 63 8 Main 63 8 Main 63 15 Main 63 6
Sub 63 3 Sub 63 8 Sub 63 8 Sub 63 7 Sub 63 7 Sub 63 7 Sub 63 10 Sub 63 8
Main/Sub 3 3 Main/Sub 3 1 Main/Sub 1 0
Main/Sub 1 1 Main/Sub 1 0 Main 10 6 Main 10 4 Main 10 0 Main 10 8 Main 10 9 Main 10 6 Main 10 10 Main 10 5 Main 10 5 Main 10 6 Main 10 8 Main 10 6 Sub 10 5 Sub 10 2 Sub 10 0 Sub 10 7 Sub 10 5 Sub 10 5 Sub 10 5 Sub 10 5 Sub 10 5 Sub 10 5 Sub 10 5 Sub 10 5 Sub 1 1
should be followed previous data
Changed Component
12
42PD7200 (PW2)
)
AFC_
)
AFC_
)
AFC_
)
AFC_
)
AFC_
)
AFC_
)
AFC_
)
_
_
_
_
_
_
_
_
_V_
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
_
_
_
p
_
0
_
p
_
_
_
p
_
0
_
p
_
_
_
p
_
0
_
p
_
_
_
p
_
0
_
p
A
A
A
A
_
_
_
_
p
p
_50
_
p
p
p
_50
_
p
A
k
m
m
k
n
 : shoule be adjusted
ADJ Function Max. Default
No value FORMATTER VIDEO TUNER PDP
200 Cb offset1 Main 15 8 201 Free 202 Cr offset1 Main 15 8 203 Free 204 Cb offset1 Sub 15 8 205 Free 206 Cr offset1 Sub 15 8 207 Free 208 MVMVIDEO 209
GAIN(AV00
210
GAIN(AV1
211
GAIN(AV2
212
GAIN(AV3 GAIN(AV4
213
GAIN(AV5
214 215
GAIN(Except AV00
B-Y_ADJ Main 15 8
216 S
R-Y_ADJ Main 15 8
217 S 218 S
B-Y_ADJ Sub 15 8
219 S
R-Y_ADJ Sub 15 8
220 BELL
f0 Main/Sub 1 0
INHBT 10
221 S
ID 10
222 S 223 S
GP 30
ID 10
224 S 225 BELL/HPF 33 226 HS Phase Main 1 0 227 HS Phase Sub 1 0 228 Bandwidth 1 NTSC/PAL/480i/576i 3 2 229 Bandwidth 1 480 230 Bandwidth 1 1080i-50/60/720 231 Bandwidth 2 NTSC/PAL/480i/576i 3 2 232 Bandwidth 2 480 233 Bandwidth 2 1080i-50/60/720 234 Sub Contrast 1 Exce 235 Sub Contrast 1 HDMI 15 0 236 Sub Contrast 2 Exce 237 Sub Contrast 2 HDMI 15 0 238 Sub Color 1 Exce 239 Sub Color 1 HDMI 15 0 240 Sub Color 2 Exce 241 Sub Color 2 HDMI 15 0 242 HV THRU 1 NTSC/PAL/480i/576i/480 243 HV THRU 1 1080i-50/60/720 244 HV THRU 2 NTSC/PAL/480i/576i/480 245 HV THRU 2 1080i-50/60/720 246 H
SEP 1 RF/VIDEO 1 0 SEP 1 480i/576i 1 0
247 H 248 H
SEP 1 480p/576 SEP 1 1080i_5
249 H 250 H
SEP 1 1080i_60/720
251 H
SEP 2 RF/VIDEO 1 0 SEP 2 480i/576i 1 0
252 H
SEP 2 480p/576
253 H 254 H
SEP 2 1080i_5 SEP 2 1080i_60/720
255 H 256 V
SEP 1 RF/VIDEO 1 0 SEP 1 480i/576i 1 0
257 V 258 V
SEP 1 480p/576 SEP 1 1080i_5
259 V
SEP 1 1080i_60/720
260 V 261 V
SEP 2 RF/VIDEO 1 0 SEP 2 480i/576i 1 0
262 V
SEP 2 480p/576
263 V 264 V
SEP 2 1080i_5 SEP 2 1080i_60/720
265 V
FC MODE 1 RF 3 0
266 267
FC MODE 1 VIDEO 3 0 FC MODE 2 RF 3 0
268
FC MODE 2 VIDEO 3 0
269 270 N
LVL 1 RF 1 0 LVL 1 VIDEO 1 0
271 N
LVL 2 RF 1 0
272 N 273 N
LVL 2 VIDEO 1 0 274 Free 275 HD POSITION 1 480i/576i 15 0 276 HD POSITION 1 480 277 HD POSITION 1 1080i 278 HD POSITION 1 1080i 279 Free 280 HD POSITION 2 480i/576i 15 0 281 HD POSITION 2 480 282 HD POSITION 2 1080i 283 HD POSITION 2 1080i 284 Y LPF 1 RF 1 1 285 Y LPF 1 VIDEO 1 1 286 Y LPF 2 RF 1 1 287 Y LPF 2 VIDEO 1 1 288 Gain 1 11 289 Gain 2 11 290 YCS MODE NTSC3.58 3 0 291 3D DET 77
FC Gain NTSC3.58 3 0
292 293 2D-CNR 294 2D-CNR Li 295 GMCON 10 296 Y-NC 10 297 Y-NC Li 298 2D-YNR 299 2D-YNR Gai
ADJ. Items Mode PWB PWB PWB PANEL
㧙 㧙 㧙 㧙 㧙 30 30
/576
/576
t HDMI 15 0
t HDMI 15 0
t HDMI 15 0
t HDMI 15 0
/576
/576
/576
60/720
/576
60/720
10 30 30 30
30 30
32 30
32 30
10 10 10 10
10 10 10
10 10 10
10 10 10
10 10 10
15 0 15 0 15 0
15 0 15 0 15 0
30 30
30 30 30
should be followed previous data
Changed Component
13
42PD7200 (PW2)
m
p
p
p
o
p
A
X
S
t
p
S
p
S
p
S
p
S
p
y
y
y
p
V
p
p
A
A
A
A
A
A
A
A
A
A
A
A
_
p
p
p
S
S
S
S
p
A
p
p
y
y
y
p
p
V
p
p
p
p
A
A
A
A
A
A
 : shoule be adjusted
ADJ Function Max. Default
No value FORMATTER VIDEO TUNER PDP
300 2D-YNR Li 301 BLK EXP 30 302 CKILL 10
ut Clam
303 Out
ut Clamp aut
304 In 305 Int Clam 306 C-ENH 307 YC-MI 308 Video2 RGB Mode ON 309 HSWINV 10 310 Free 311 V-ENHA Gain NTSC3.58 3 2 312 V-ENHA NL NTSC3.58 3 2 313 H-ENHA Gain NTSC3.58 3 1 314 3DNR Corr for 3DYC 315 Burst ON for 2DYCS???? 10 316 MDMPL 317 MDMBL ޓ 10 318 H-MaskOu 319 V-MaskOut 320 In 321 In 322 Out 323 Out 324 V-ENHA Core NTSC3.58 3 0 325 In 326 Burst Gate Ke 327 S 328 H-WST NTSC3.58 7 3 329 HD Am 330 HD Gain 331 HD Am 332 HD Gain 1 NTSC3.58 31 8 333 HD Am 334 HD Gain 2 NTSC3.58 31 4 335 336 337 338 339 340 341 342 343 344 345 346 347 BCMSLP NTSC3.58 3 3 348 BCSSLP NTSC3.58 3 3 349 BYMSLP NTSC3.58 3 3 350 BYSSLP NTSC3.58 3 2 351 BCMESET NTSC3.58 3 2 352 BCMFSET NTSC3.58 3 2 353 BCSESET NTSC3.58 3 2 354 BCSFSET NTSC3.58 3 2 355 BYMESET NTSC3.58 3 3 356 BYMFSET NTSC3.58 3 3 357 BYSESET NTSC3.58 3 3 358 BYSFSET NTSC3.58 3 3 359 BCMUP NTSC3.58 1 1 360 CECMP NTSC3.58 7 4 361 CSCMP NTSC3.58 15 0 362 F1HE 363 F1VER NTSC3.58 3 1 364 MREF NTSC3.58 15 2 365 CDEYE NTSC3.58 3 2 366 YDEYE NTSC3.58 3 2 367 MDS NTSC3.58 1 0 368 F-TBC OFF MDMPL NTSC3.58 1 0 369 REC:C 370 V-ENHA Gain Exce 371 V-ENHA NL Exce 372 H-ENHA Gain Exce 373 3D-CNR Lim for 2DYC 374 3D-CNR k for 2DYCS 30 375 3D-CNR Gain for 2DYC 376 3D-YNR Lim for 2DYC 377 3D-YNR k for 2DYCS 30 378 3D-YNR Gain for 2DYC 379 YCS MODE Exce 380 381 Free 382 Free 383 V-ENHA Core Exce 384 In 385 Burst Gate Ke 386 S 387 H-WST Exce 388 HD Am 389 HD Gain 390 HD Am 391 HD Gain 1 Exce 392 HD Am 393 HD Gain 2 Exce 394 395 396 397 398 399
Manual 10
ut Y-Delay(Main RF mode) for 3DYC
ut Y-Delay(Main Video mode) for 3DYC
ut-Y-Delay(Main RF Mode) for 3DYC ut-Y-Delay(Main Video Mode) for 3DYC
ut Clamp Ke
nc sep LPF NTSC3.58 1 0
1 NTSC3.58 7 6
2 NTSC3.58 7 1
3 NTSC3.58 7 5
CMSLP NTSC3.58 3 1 CSSLP NTSC3.58 3 2 YMSLP NTSC3.58 3 2 YSSLP NTSC3.58 3 2 CMESET NTSC3.58 3 3 CMFSET NTSC3.58 3 3 CSESET NTSC3.58 3 2 CSFSET NTSC3.58 3 2 YMESET NTSC3.58 3 3 YMFSET NTSC3.58 3 3 YSESET NTSC3.58 3 1 YSFSET NTSC3.58 3 3
R NTSC3.58 3 1
DEC Except NTSC3.58 1 0
FC Gain Except NTSC3.58 3 0
ut Clamp Ke
nc sep LPF Except NTSC3.58 1 0
1 Except NTSC3.58 7 6
2 Except NTSC3.58 7 1
3 Except NTSC3.58 7 5
CMSLP Except NTSC3.58 3 2 CSSLP Except NTSC3.58 3 2 YMSLP Except NTSC3.58 3 0 YSSLP Except NTSC3.58 3 0 CMESET Except NTSC3.58 3 3 CMFSET Except NTSC3.58 3 3
ADJ. Items Mode PWB PWB PWB PANEL
ޓ
ޓ ޓ
NTSC3.58 1 1 NTSC3.58 1 1
NTSC3.58 31 13
t NTSC3.58 3 2 t NTSC3.58 3 1 t NTSC3.58 3 1
t NTSC3.58 3 0
t NTSC3.58 3 0 Except NTSC3.58 1 1 Except NTSC3.58 1 1
t NTSC3.58 7 3
Except NTSC3.58 31 13
t NTSC3.58 31 8
t NTSC3.58 31 4
30
10 11
10 10 10
10
10
70 70 74
74 15 8 15 8
70
70
70
70
should be followed previous data
Changed Component
14
42PD7200 (PW2)
A
A
A
A
A
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
_
_
p
_
0
_
p
_
_
p
_
0
_
p
(
e
)
)
(
)
(
)
)
(
)
g(
)
g(
)
r
g(
)
p
n
g
]
y
n
y
n
g
t
g
g
r
y
r
A
e
A
e
y
y
s
p
(
)
(
)
A
)
A
)
A2_
)
A2_
)
)
_
)
_
)
_
_
)
_
)
_
)
A
)
_
A
)
)
_
_
_
)
_
)
AGC_
y
y
y
y
_H_
_V_
put[
]
_
e
 : shoule be adjusted
ADJ Function Max. Default
No value FORMATTER VIDEO TUNER PDP
400ACSESET Except NTSC3.58 3 2
CSFSET Except NTSC3.58 3 2
401 402
YMESET Except NTSC3.58 3 3 YMFSET Except NTSC3.58 3 3
403
YSESET Except NTSC3.58 3 1
404
YSFSET Except NTSC3.58 3 3
405 406 BCMSLP Exce 407 BCSSLP Exce 408 BYMSLP Exce 409 BYSSLP Exce 410 BCMESET Exce 411 BCMFSET Exce 412 BCSESET Exce 413 BCSFSET Exce 414 BYMESET Exce 415 BYMFSET Exce 416 BYSESET Exce 417 BYSFSET Exce 418 BCMUP Exce 419 CECMP Exce 420 CSCMP Exce 421 F1HER Exce 422 F1VER Exce 423 MREF Exce 424 CDEYE Exce 425 YDEYE Exce 426 MDS Exce 427 F-TBC OFF MDMPL Exce 428 SEPA
LEVEL_DSUB 480i/576i 3 2 LEVEL_DSUB 480p/576
429 SEPA 430 SEPA
LEVEL_DSUB 1080i_5 LEVEL_DSUB 1080i_60/720
431 SEPA 432 HD-PHASE 433 HD-PHASE 434 HD-PHASE 435 HD-PHASE 436 Heat APC function 437 438 439 Select for APC function 10 440 CCFMD function RF/VIDEO 1 0 441 CCFMD function DVI-PC/DVI-STB/DSUB-RGB 1 0 442 NTSC/EBU 443 NTSC/EBU 444 NTSC/EBU 445 Correction for Trackin 446 Correction for Trackin 447 Correction for Trackin 448 Color Tem 449 Bri 450 D 451 D 452 Histo 453 Histo 454 Histo 455 D 456 FC6 THROUGH 0:OFF, 1:THROUGH ON 10 457 458 459 HD/VD OUTPUT LEVEL 11 460 ISM Control for WVGA For WVGA 1 1 461 Free 462 WVGAޓBRIGHTNESS For WVGA 1 0 463 Black insert function 0:Not available, 1:Availabl 464 D 465 DVI-STB Setu 466 HSYNC De-Jitter 0:Low 467 HSYNC De-Jitter 0:Low 468 Free 469 470 471 472
473 PRE_AM
474 VOL 475 VOL 476 PRE 477 PRE 478 PRE 479 PRE
480 PRE_FM
481 PRE
482 PRE_FM
483 PRE 484 PRE 485 CM 486 CM 487 488 TEXT H s 489 TEXT V s 490 TEXT 491 TEXT 492 Select for APC out 493 L 494 Free 495 HDMI EDID WRITE ENABLE 0:Disenable, 1:Enabl 496 BPMA : Back Porch Mode,Field2 11
DSUB 480i/576i 63 20 DSUB 480p/576 DSUB 1080i_5 DSUB 1080i_60/720
-select(0:1.0, 1:2.2, 2:2.8
-select(0:1.0, 1:2.2, 2:2.8
htness Limitted Function of PANEL [APSON namic Back Light Correctio namic Contrast Correctio
ram Color Managemen ram Gradation Amp. 11 ram Enhance
namic Enhance
PL Enhancer 0:OFF, 1:ON For Dynamic mod TC INPUT RED SELECT 10
namic Backlight function 0:No, 1:Ye
UTO_FM/AM(D11-D8 UTO_FM/AM(D 7-D0
THRESHOLD(D11-D8
THRESHOLD(D 7-D0
SCART1(D15-D8 SCART1(D 7-D5 SCART 254 31 FM 4.5MHz(JAPAN FM 4.5MHz(Except BTSC-SAP mode FM 4.5MHz(BTSC-SAP
FM 4.5MHz(KORE
FM Except 4.5MHz(Dual/Stereo mode)254 27 NICAM 254 57
THRESHOLD(D15-D8 THRESHOLD(D7 -D0
LEVEL AGCL 30
PLL.GAIN 10
HAPC) availabl
CCFORM CCFORM CCFORM
. Correctio
0:None VGA/Others Yes, 1:All none 2:All have DVI-STB 2 0
nc dela
nc dela POSITION POSITION
ADJ. Items Mode PWB PWB PWB PANEL
t NTSC3.58 3 3 t NTSC3.58 3 3 t NTSC3.58 3 3 t NTSC3.58 3 2 t NTSC3.58 3 2 t NTSC3.58 3 2 t NTSC3.58 3 2 t NTSC3.58 3 2 t NTSC3.58 3 3 t NTSC3.58 3 3 t NTSC3.58 3 3 t NTSC3.58 3 3 t NTSC3.58 1 1 t NTSC3.58 7 4 t NTSC3.58 15 0 t NTSC3.58 3 1 t NTSC3.58 3 1 t NTSC3.58 15 2 t NTSC3.58 3 2 t NTSC3.58 3 2 t NTSC3.58 1 0 t NTSC3.58 1 0
32 32 32
63 20 63 20 63 20
11
10
11
32 11
11 11
11 11
11
10
254 17
254 34 254 32 254 60
254 36
254 34
254 17
127 0 127 50 254 42 254 39
11
DCBON DCBON DCBON
Disabled), 1:High(Enabled Disabled), 1:High(Enabled
Except Europe model
RF/VIDEO 2 1 DVI-PC/DVI-STB/DSUB-RGB 2 1
SD(YCbCr)/Scart-RGB 1 0 HD(YPbPr DVI-PC/DVI-STB/DSUB-RGB 1 0 RF/VIDEO-Color Temp. Cool 1 1 RF/VIDEO-Color Temp. Nor/Wa DVI-PC/DVI-STB/DSUB-RGB 1 1
For LCD 1 1
For LCD Dynamic mode or Da For LCD 1 1
DVI-PC 1 0 DVI-STB 1 0
15 2 254 189 15 0 254 112
Except 4.5MHz (Except Dual/Stereo mode
254 115 70
4.5MHz(Except KORE Dual/Stereo mode
Except 4.5MHz(Except Dual/Stereo mode
254 0 254 36
㧙 㧙 㧙 㧙
Main RF 2 1
Dual/Stereo
should be followed previous data
Changed Component
15
42PD7200 (PW2)
gepump
t
g
p
a
a
K
D
yp
D
p
)
p
)
play
(
)
play
n
A
)
t
(
)
p
p
t
(s)
e
e
e
y
r
(
)
y
)
e
n
(
)
s
p
e
e
e
S
y
S
e
(
)
guage(
)
(
)
A
)
t
(
)
(
)
A
)
(
)
(
)
(
)
j
y
y
pen(
)
g
e
g
e
g
e
p
s
e
p
s
e
p
s
e
p
s
p
s
e
[Dy
e
[
e
[
e
[Dy
e
[
e
[
e
y
x
play
g
g
g
g
)
y
l
y
l
e
y
l
y
l
e
y
l
pp
l
pp
l
e
pp
l
 : shoule be adjusted
ADJ Function Max. Default
No value FORMATTER VIDEO TUNER PDP
497 VCORA : VCO range select 30 498 CRNTA : chan 499 TESTA : Matchin 500 PRMB : 501 HDCP : HDCP enable criteri 502 SMPLING For CCD 255 0 503 POLLING For CCD 255 15 504 START For CCD 7 2 505 TIMEOUT For CCD 30 5 506 STATUS For CCD 7 2 507 CCD-HP For CCD 79 40 508 CCD-CL 509 Horizontal Position of OS 510 Vertical Position of OSD 15 7 511 Free 512 T
ical Value of Contrast OS
513 Free
erature for Fun start (Temp_High
514 Tem 515 Tem
erature for Fun stop(Temp_Low 516 Dis 517 Dis
ccumulation time for Panel (hours
518 519 Reset function of accumulation time for WVGA/LCD Panel 0:Normal 1:Rese
520 Power Save/Screen Saver On/Off Setting at Initialize, Reset and Shipping
521 PC Power Save function 522 Screen Saver-Picture shift amount 0:1 523 Screen Saver-Picture shift Direction 0:dia /1:cross /2:u 524 Waite Time for POWER SAVE function 525 BURN-IN enable/ disenabl 526 BURN-IN mod 527 Recover 528 EURO DK-SECAM MASK 529 Set Sound S
Power condition at power save mode of PC mod
530
after done RESET function Select Wide mode for Europe model
531
Normal= 5mode/ For Service= 10 mode 532 Thermo sensor function available or not 0:None, 1:Ye 533 Video In 534 EURO SOUND SYSTEM DK Disable 0:Enable 1:Disabl 535 Remote Function available 0:NO, 1:YE 536 Ke
Function available 0:NO, 1:YE 537 DVI-STB/RGB-COMPONENT Function available 0:NO, 1:YES 1 0 538 Terminal Mode Function available 0:Not Available, 1:Availabl 539 Select color control 540 Lan 541 Hotel Mode 542
nalog Data (0:Keep EEPROM, 1:Not Keep to EEPROM 543 Maximum Volume Limi 544 Power Mode 545 Free 546 Channel Select
uto_sound 4.5 (0:Korea, 1:BTSC, 2:Japan
547 548 T/TEXT 549 Free 550 Channel Preset 551 V FREQ 60Hz Force 552 Offset value of ad 553 Use "TINT Offset↑" 0:No, 1:Yes For COMPAL factor 554 PDP-BLK ON/OFF 1:ON, 0:OFF 1 0 555 IIC BUS Data/Clock O 556 Protect for Ima 557 Protect for Ima 558 Protect for Ima 559 Dis
ersion Time of Sustain current 0:2 Times, 1:4 time ersion Time of Sustain current 0:2 Times, 1:4 time
560 Dis
ersion Time of Sustain current 0:2 Times, 1:4 time
561 Dis 562 Dis
ersion Time of Sustain current 0:2 Times, 1:4 time
563 Dis
ersion Time of Sustain current 0:2 Times, 1:4 time 564 Q mode 0:Freeze, 1:Move 1, 2:Move 2 For 50Hz 565 Q mode 0:Freeze, 1:Move 1, 2:Move 2 For 50Hz 566 Q mode 0:Freeze, 1:Move 1, 2:Move 2 For 50Hz 567 Q mode 0:Freeze, 1:Move 1, 2:Move 2 For 60Hz 568 Q mode 0:Freeze, 1:Move 1, 2:Move 2 For 60Hz 569 Q mode 0:Freeze, 1:Move 1, 2:Move 2 For 60Hz 570 Q mode 0:Freeze, 1:Move 1, 2:Move 2 For 70Hz(PC) 2 0 571 Main/Sub YFRNR passage level [MYNRP6] 572 573 574
Dummy575
575 576 Gra
level of BM Inde 577 Dis 578 TA1391: SYNC SW Chan 579 Free 580 Free 581 Countin 582 Countin 583 Countin 584 Lower Limits value for S 585 Lower Limits value for S 586 Lower Limits value for S 587 Lower Limits value for S 588 Lower Limits value for S 589 U
er Limits Value for Sync Detect of 2ms interva er Limits Value for Sync Detect of 2ms interva
590 U 591 U
er Limits Value for Sync Detect of 2ms interva
Test to allow increment of stability counter. 1 1
reamble criteri
of internal temperature of Panel map versio
to an error of OSC frequency of Ceramic resonator for time
stem at Auto mode of Sound Sys.(0:auto, 1:4.5MHz
ut function available or not at RGB1 & RGB2 mod
0:Asia, 1:South America
Refer to below
0:No, 1:Yes
0:Last mode, 1:Pos1, 2-7:V1-6, 8-9:RGB1-2
0:CCIR, 1:CHINA
0:None, 1:Yes
0:VESTEL, 1:GIFU, 2:HAMA, 3:HFDM, 4:AUSTRALIA
0:None, 1:Yes
usted TINT For COMPAL factor
e Retention 0:Off, 1:7%, 2:14%, 3:21%, 4:AUTO Dynamic mod e Retention 0:Off, 1:7%, 2:14%, 3:21%, 4:AUTO Natural mod e Retention 0:Off, 1:7%, 2:14%, 3:21%, 4:AUTO Cinema mod
of BM version 127 -
time for discrimination of fH(M30625/TA1370) time for discrimination of fV(M30625/TA1370) time for discrimination of fV(TB1274
ADJ. Items Mode PWB PWB PWB PANEL
current selec
Temperature
0:Impossible, 1:Possible
V=60) 0:Normal 1:Mask(V=60
0:Close, 1:Open
e
nc Detect of 2ms interva nc Detect of 2ms interva nc Detect of 2ms interva nc Detect of 2ms interva nc Detect of 2ms interva
ixel㧛1:2pixel㧛2:3pixel 2 0
[MYNRP7] [MYNRP8] [MYNRP8']
/down /3:left/righ
For CCD 79 57
DYNAMIC 31 31
P.S/S.S 0:Off/20m 1:On/Off
2:Off/Off
VIDEO/PC 254 15 0:Disenable, 1:Enabl
Main 1 0 0:Keep last condition, 1:Return to normal conditio
0:Normal, 1:For service 1 0
0:Not Available, 1:Availabl
RS232C 1 1 Main/Sub 1 0
For Dynamic mod For Natural mod For Cinema mod For PC mode 1 1 For PC-Movie mod
480i/576i (HDMI) 480p/576p (HDMI) 1080i-50/720p-50 (HDMI) 1080i-60/720p-60 (HDMI)
0:SYNC, 1:HDVD1&2
㧙 㧙 㧙
For AFC at TV mode 254 25 For Free Running at TV mod For AUTO OFF at TV mode 254 25 For Free Running at AV mod For Power Save at AV mode 254 5 For AFC at TV mode 254 40 For Free Running at TV mod For AUTO OFF at TV mode 254 35
namic] mod Natural] mod Cinema] mod
namic] mod Natural] mod Cinema] mod
70
31 6 31 12
15 7
254 58 254 55 125 ­255 -
65535 -
10
20
11
30
11 22
62 34
10
10
10 11 10 11 11
60 20 10
63 63
90
10 20 11
41 10
20 11
10
10 44 44 44 10 11 11
11 21 21 21 21 21 21
70 70 71 70
-
31 4
10
31 2 31 2 31 2
254 30
254 30
254 45
should be followed previous data
-
Changed Component
16
42PD7200 (PW2)
l
e
pp
l
(
(Hz)
(
)
(
)
(
)
(
(
g
t
g
t
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
y
(
)"
y
g
_
yp
yp
y
o
y)
j
)
j
r
A
g
e
A
)
A
)
A
e
(
)
j
 : shoule be adjusted
ADJ Function Max. Default
No value FORMATTER VIDEO TUNER PDP
592 Upper Limits Value for Sync Detect of 2ms interva 593 U
er Limits Value for Sync Detect of 2ms interva 594 V detection 595 H detection 596 V detection 597 H detection 598 COLOR SYSTEM CONTROL-MODE 599 COLOR SYSTEM CONTROL-MODE 600 Countin 601 Countin 602 TB1274 Read Data 603 TB1274 Read Data 604 TB1274 Read Data 605 TB1274 Read Data 606 MSP Read Data 607 MSP Read Data 608 MSP Read Data 609 MSP Read Data 610 MSP Read Data 611 MSP Read Data 612 TA1391FG Read Data 613 TA1391FG Read Data 614 TA1391FG Read Data 615 TA1391FG Read Data 616 TA1391FG Read Data 617 TA1391FG Read Data 618 TA1391FG Read Data 619 TA1391FG Read Data 620 TA1370G Read Data 621 TA1370G Read Data 622 SiI9993 Read Data SYNC1 : VSYNC/Clock detect/S 623 SiI9993 Read Data NHRDL1 : N hardware value 1 -­624 SiI9993 Read Data NHRDM1 : N hardware value 1 -­625 SiI9993 Read Data NHRDH1 : N hardware value 1 -­626 SiI9993 Read Data CHRDL1 : CTS hardware value 1 - ­627 SiI9993 Read Data CHRDM1 : CTS hardware value 1 - ­628 SiI9993 Read Data CHRDH1 : CTS hardware value 1 - ­629 SiI9993 Read Data ACR1 : ACR PLL hardware value 1 - ­630 SiI9993 Read Data ACRS1 : ACR PLL hardware value 1 - -
SiI9993 Read Data SFREQ1 : "Extracted Sampling Frequency 1
631
channel status b24-27 632 SiI9993 Read Data CLKFRQ1: Clock Accurac 633 SiI9993 Read Data ALNG1 : Audio len 634 SiI9993 Read Data MT 635 SiI9993 Read Data VTYP1 : AVI infoframe t 636 SiI9993 Read Data VVER1 : AVI infoframe version code 1 - ­637 SiI9993 Read Data VINFO11: AVI infoframe data 1 -­638 SiI9993 Read Data VINFO21: -­639 SiI9993 Read Data VINFO31: -­640 SiI9993 Read Data VINFO41: -­641 SiI9993 Read Data VINFO51: -­642 SiI9993 Read Data ATYP1 : AUDIO InfoFrame T 643 SiI9993 Read Data AVER1 : AUDIO InfoFrame Version Code 1 - ­644 SiI9993 Read Data AINFO11: AUDIO InfoFrame Data B 645 SiI9993 Read Data AINFO21: -­646 SiI9993 Read Data AINFO31: -­647 SiI9993 Read Data AINFO41: -­648 SiI9993 Read Data AINFO51: -­649 Initialize function for EEPROM of Video PWB board 10
650 Check condition of EEPROM of Video PWB board
651 W/B Initialize 1­652 Gain ad 653 Gain ad 654 655 656 657 658 EEPROM Initialize 659 Enter to SUB ad 660 Enter to service menu of FC sub mi-con --
Format PWB 0:out of range, 128:NO V(or out of spec),50/60 Format PWB㧕 0:out of range, 128:NO H(or out of spec), 15/28/31/33/45(kHz VideoPWB㧕 0:out of range, 128:NO V(or out of spec), 255:interrupt 50/60(Hz Video PWB 0:out of range, 128:NO H(or out of spec), 15/28/31/33/45(kHz
Value of 2ms Sync.Detec Value of 2ms Sync.Detec
00h 01h 00h
01h CNTROL)(D15-D8 CNTROL)(D 7-D0 STANDARD_RES)(D15-D8 STANDARD_RES)(D 7-D0 STATUS)(D15-D8 STATUS)(D 7-D0
00h 01h
ustment of RGB amplifier(FLAON
ustment of RGB amplifie utomatic White Peak Adj.Sin utomatic Color Level Adj.(TB1274BF utomatic Color Level Adj.(TB1274BF utomatic White Peak Adj. Multi Picture mod
0:No, 1:Yes
ust menu --
ADJ. Items Mode PWB PWB PWB PANEL
0:BW, 2:3.58NTSC, 3:4.43NTSC, 㨯㨯㨯)Main - ­0:BW, 2:3.58NTSC, 3:4.43NTSC, 㨯㨯㨯)Sub - -
00h 01h 02h 03h 04h 05h 06h 07h
nc detect 1 - -
same value at 0x30
MD1 : AV mute/HDMI mode 1 - -
/Sampling Frequency 1--
th/Audio length max 1 - -
e code 1 - -
e Code 1 - -
tes 1 - -
For Free Running at AV mod For Power Save at AV mode 254 200
Main - ­Sub - ­Main - ­Main - ­Sub - ­Sub - -
0:Normal, 1:Abnormal(Fail or n assembl
Main - - ǘ Sub - -
le Picture mod Main PAL/NTSC(COMPOSITE - ­Sub PAL/NTSC(COMPOSITE - -
254 45
255 ­255 ­255 ­255 -
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
1-
--
-­10
should be followed previous data
Changed Component
ǘ
17
42PD7200 (PW2)
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
g
)
/
p
g
)
)
g
)
p
g
)
p
g
)
g
)
g
)
g
)
)
g
)
g
t
A
g
t
A
g
t
A
g
t
A
g
t
A
g
t
(CM)
)
(CM)
)
(CM)
)
(CM)
)
(CM)
(CM)
p)
(CM)
p)
(CM)
)
(CM)
(CM)
(CM)
)
(CM)
)
(CM)
)
(CM)
)
(CM)
)
(CM)
(CM)
p)
(CM)
p)
(CM)
)
(CM)
p
)
p
)
p
)
)
p
)
p
)
p
p
)
p
p
)
p
)
)
p
)
)
p
)
p)
p
)
p)
p
)
)
p
)
)
(CM)
(CM)
A
(CM)
A
(CM)
A
(CM)
A
(CM)
A
(CM)
(CM)
p)
(CM)
p)
(CM)
(CM)
)
(CM)
e
g
e
[
]
(
)[
]
[
]
p
Service
adjustment items by I
2
C-bus control (SUB adjust menu)
(*The change to a sub menu. press “ok” key after no.659 with a main menu)
 : shoule be adjusted
 : should be followed previous data
ADJ Function Max. Default
No. Value FORMATTER VIDEO TUNER PDP
0 R DRIVE1 1 G DRIVE1 2 B DRIVE1 3 R DRIVE2 4 G DRIVE2 5 B DRIVE2 6 R DRIVE3 7 G DRIVE3 8 B DRIVE3
9 R DRIVE4 10 G DRIVE4 11 B DRIVE4 12 R DRIVE1 13 G DRIVE1 14 B DRIVE1 15 R DRIVE2 16 G DRIVE2 17 B DRIVE2 18 R DRIVE3 19 G DRIVE3 20 B DRIVE3 21 R DRIVE4 22 G DRIVE4 23 B DRIVE4 24 Bri 25 Bri 26 Bri 27 Bri 28 Bri 29 Bri 30 Bri 31 Bri 32 Bri 33 Bri 34 Bri 35 Bri 36 Bri 37 Bri 38 Bri 39 Color Center 40 Color Center 41 Color Center 42 Color Center 43 Color Center 44 Color Center 45 Color Center 46 Color Center 47 Color Center 48 Tint Center 49 Tint Center 50 Tint Center 51 Tint Center 52 Tint Center 53 Tint Center 54 Tint Center 55 Tint Center 56 Tint Center 57 Tint Center 58 Tint Center 59 Center of Shar 60 Center of Shar 61 Center of Shar 62 Center of Shar 63 Center of Shar 64 Center of Shar 65 Center of Shar 66 Center of Shar 67 Center of Shar 68 Center of Shar 69 Center of Shar 70 Center of Shar 71 Center of Shar 72 Contrast Center 73 Contrast Center 74 Contrast Center 75 Contrast Center 76 Contrast Center 77 Contrast Center 78 Contrast Center 79 Contrast Center 80 Contrast Center 81 Contrast Center 82 Contrast Center 83 Contrast Center 84 Maximum Value of Contrast at REAL/NORMAL mod 85 Offset Value of Contrast data at SPLIT mode 120 53 86 Offset value of 87 Horizontal Enhanc 88 Vertical Enhance TEXT 3 3 89 Horizontal filter SW 90 91
RF/VIDEO/DSUB-COMP RF/VIDEO/DSUB-COMP
RF/VIDEO/DSUB-COMP
RF/VIDEO/DSUB-COMP RF/VIDEO/DSUB-COMP
RF/VIDEO/DSUB-COMP
RF/VIDEO/DSUB-COMP RF/VIDEO/DSUB-COMP
RF/VIDEO/DSUB-COMP
RF/VIDEO/DSUB-COMP RF/VIDEO/DSUB-COMP
RF/VIDEO/DSUB-COMP
DVI-PC/DVI-STB/DSUB-RGB DVI-PC/DVI-STB/DSUB-RGB
DVI-PC/DVI-STB/DSUB-RGB
DVI-PC/DVI-STB/DSUB-RGB DVI-PC/DVI-STB/DSUB-RGB
DVI-PC/DVI-STB/DSUB-RGB
DVI-PC/DVI-STB/DSUB-RGB DVI-PC/DVI-STB/DSUB-RGB
DVI-PC/DVI-STB/DSUB-RGB
DVI-PC/DVI-STB/DSUB-RGB DVI-PC/DVI-STB/DSUB-RGB
DVI-PC/DVI-STB/DSUB-RGB htness Center (CM htness Center (CM htness Center (CM htness Center (CM htness Center (CM htness Center (CM htness Center (CM htness Center (CM htness Center (CM htness center (CM) offse htness center (CM) offse htness center (CM) offse htness center (CM) offse htness center (CM) offse htness center (CM) offse
Enhancer Gain
ADJ. Items Mode PWB PWB PWB PANEL
ness(Y-Enhancer Gain for HV ness(Y-Enhancer Gain for HV ness(Y-Enhancer Gain for HV ness(Y-Enhancer Gain for HV ness(Y-Enhancer Gain for HV ness(Y-Enhancer Gain for HV ness(Y-Enhancer Gain for HV ness(Y-Enhancer Gain for HV ness(Y-Enhancer Gain for HV ness(Y-Enhancer Gain for HV ness(Y-Enhancer Gain for HV ness(Y-Enhancer Gain for HV ness(Y-Enhancer Gain for HV
ain for Black Stretch function Except OFF/LOW/HIGH mode 63 32
HHPF0
HHPF1
HHPF2
COOL 255 255 Ǎǘ COOL 255 255 Ǎǘ COOL 255 255 Ǎǘ NORMAL 255 255 Ǎǘ NORMAL 255 255 Ǎǘ NORMAL 255 255 Ǎǘ WARM 255 255 Ǎǘ WARM 255 255 Ǎǘ WARM 255 255 Ǎǘ BLACK & WHITE 255 255 Ǎǘ BLACK & WHITE 255 255 Ǎǘ BLACK & WHITE 255 255 Ǎǘ COOL 255 255 Ǎǘ COOL 255 255 Ǎǘ COOL 255 255 Ǎǘ NORMAL 255 255 Ǎǘ NORMAL 255 255 Ǎǘ NORMAL 255 255 Ǎǘ WARM 255 255 Ǎǘ WARM 255 255 Ǎǘ WARM 255 255 Ǎǘ BLACK & WHITE 255 255 Ǎǘ BLACK & WHITE 255 255 Ǎǘ BLACK & WHITE 255 255 Ǎǘ
ޓMulti
NTSC/PAL Scart-RGB(50/60Hz 480i/576i/480p/576 1080i-50/60/720 DVI-PC 254 128 DVI-STB 254 128 DSUB-RGB 254 128 Expand DSUB-RGB (Reserved HDMI 254 128
V1 254 127 V2 254 127 V3 254 127 V4 254 127
V5 254 127 DSUB-COMP 254 127 SD(YCbCr)(50Hz SD(YCbCr)(60Hz Scart-RGB(50/60Hz HD(YPbPr)(50/60Hz DVI-PC 127 64 DVI-STB(480i/576i/480p/576 DVI-STB(1080i-50/60/720 DVI-STB(VGA DSUB-RGB 127 64 PAL 254 125 Scart-RGB(50Hz Scart-RGB(60Hz SD(YCbCr)(50Hz SD(YCbCr)(60Hz HD(YPbPr)(50/60Hz DVI-PC 254 128 DVI-STB(480i/576i/480p/576 DVI-STB(1080i-50/60/720 DVI-STB(VGA DSUB-RGB 254 128 RF 31 10 VIDEO 31 15 Scart-RGB(50/60Hz 480i/576i 31 10 480p/576 720 1080i-50/60 31 10 TEXT(for split DVI-STB(480i/576i DVI-STB(480p/576 DVI-STB(720 DVI-STB(1080i-50/60 DVI-STB(VGA RF 254 137
V1 254 137
V2 254 137
V3 254 137
V4 254 137
V5 254 137 DVI-PC 254 128 DVI-STB(With Setu DVI-STB(Without Setu DSUB-RGB 254 128 Expand DSUB-RGB (Reserved DSUB-COMP 254 137
TEXT 3 3
NTSC/480i 1 0 PAL/576i 1 0 480p/576p/1080i-50/60/720
icture 254 128
254 128 254 128 254 124
254 128
127 72 127 68 127 70 127 70
127 62 127 62 127 62
254 121 254 120 254 123 254 130 254 135
254 128 254 128 254 128
31 14
31 15 31 6
31 19 31 14 31 10 31 6 31 10 31 10
254 149 254 128
254 128
254 188
10
Changed Component
18
42PD7200 (PW2)
]
(
)[
]
/
p
[
]
[
]
[
]
)
[
]
[
]
p
[
]
p
[
]
g
]
(
)[
]
/
p
[
]
[
]
[
]
)
[
]
[
]
p
[
]
p
[
]
g
C
g
]
/
p
[
]
[
]
)
[
]
p
[
]
p
[
]
t
g
]
[
]
p
p
]
(
)[
]
p
]
[
]
p
)[
]
[
]
p
]
(
)[
]
[
]
[
]
p
)[
]
[
]
[
]
[
]
p
[
]
p
[
]
[
]
[
]
p
[
]
p
g
]
[
]
p
p
]
[
]
p
p
]
[
]
p
g
]
[
]
p
[
]
[
]
p
[
]
[
]
[
]
[
]
p
[
]
p
g
]
[
]
p
p
]
[
]
p
p
]
[
]
[
]
)
[
]
p
g
]
[
]
p
q
]
[
]
p
[
]
p
A
A
(
]
[71])
(
])
(
]
[71])
g
]
[62])
g
])
g
])
(
]
[62])
(
]
[62])
(
])
p
]
[30])
p
]
[30])
p
]
[30])
 : shoule be adjusted
ADJ Function Max. Default
No. Value FORMATTER VIDEO TUNER PDP
92 Horizontal Coring Level [HECOR1 93
Enhancer Gain 94 95 96 97 98 99
100 101 Vertical Corin 102
Enhancer Gain
103 104 105 106 107 108 109 110 Enhancer 111 Corin 112 113 114 115 116 117 Corin 118 119 YFRNR in 120 HD-NTSC, HD-PAL 121 4 122 123 YFRNR in 124 125 CFRNR in 126 HD-NTSC, HD-PAL 127 128 129 CFRNR in 130 131 Vertical Enhancer Gain for Y/G 132 133 134 135 Vertical DSB Gain for Y/G 136 137 138 Vertical DSB Corin 139 140 Vertical Enhancer Cli 141 142 Vertical Cli 143 144 Vertical Non Linear Peakin 145 146 Horizontal Enhancer Gain for Y/R 147 148 149 150 Horizontal DSB Gain for Y/R 151 152 153 Horizontal DSB Corin 154 155 Horizontal Enhancer Cli 156 157 Horizontal Cli 158 159 160 161 Horizontal Non Linear Peakin 162 163 Horizontal HPF Peak Fre 164 165 166 Initial value of Contrast Extend 1 of Panel Life function 127 93 167 Interval time of correction time Extend 1 of Panel Life function 127 10 168
dditional value of Contrast Extend 1 of Panel Life function 127 1 169 Initial value of Contrast Extend 2 of Panel Life function 127 63 170 Interval time of correction time Extend 2 of Panel Life function 127 6
dditional value of Contrast Extend 2 of Panel Life function 127 1
171 172 Menu Init. Contrast 173 Menu Init. Contrast 174 Menu Init. Contrast 175 Menu Init. Bri 176 Menu Init. Bri 177 Menu Init. Bri 178 Menu Init. Color 179 Menu Init. Color 180 Menu Init. Color 181 Menu Init. Shar 182 Menu Init. Shar 183 Menu Init. Shar
Level[VECOR1
ain of VH for
Amplitude for Y/G[YC0R0
Amplitube for B-Y/B,R-Y/R[CC0R0
ut Gain(Main) 2pictures[MYNRG0
ut Gain(Sub
ut Gain(Main) 2pictures[MCNRG0
ut Gain(Sub
Offset Level[YVECLPL0
Offset Level for Y/R[YHECLPL0
htness(-31[0 htness(-31[0]㨪+31[62 htness(-31[0]㨪+31[62
ADJ. Items Mode PWB PWB PWB PANEL
HECOR2 HECOR3 HECOR4 HECOR5' HECOR5 HECOR6 HECOR7 HECORPC
VECOR2 VECOR3 VECOR4 VECOR5' VECOR5 VECOR6 VECOR7 VECORPC
YC0R1 YC0R2 YC0R3 YC0R4 YC0R5
CC0R1
sub
ictures[MYNRG2
MYNRG3
YCNRG1
SUB
MCNRG2 MCNRG3
SCNRG1
YVEG1 YVEG2 YVEG3
YVDSBG1 YVDSBG2
for Y/G[YVDSBC0
YVDSBC1 for Y/G 0:LTI[YVECLP0 YVECLP1
YVECLPL1
YVNLP1
YHEG1 YHEG2 YHEG3
YHDSBG1 YHDSBG2
for Y/R[YHDSBC0
YHDSBC1
YHDSBC1
YHECLPL1 YHECLPL3 YHECLPL2
YHNLP1
YHHPF1 YHHPF2
-31[0
-31[0]㨪+40[71
-31[0
-31[0
-31[0
-31[0]㨪+31[62 ness(-15[0 ness(-15[0 ness(-15[0
MYNRG1
YCNRG0
MCNRG1
SCNRG0
YVEG0
YVDSBG0
for Y/G[YVNLP0
YHEG0
YHDSBG0
for Y/R 0:LTI[YHDSBC0
for Y/G[YHNLP0
. SW for Y/R[YHHPF0
+40
+40
+31
+31+31
+15
㨪 㨪+15+15
NTSC-RF 15 3
ޓMulti
PAL-RF NTSC-VIDEO 15 1 PAL-VIDEO 15 1 Scart-RGB(50/60Hz 480i/576i 15 2 480p/576 1080i-50/60/720 PC 15 1 NTSC-RF 15 1 PAL-RF NTSC-VIDEO 15 1 PAL-VIDEO 15 1 Scart-RGB(50/60Hz 480i/576i 15 0 480p/576 1080i-50/60/720 PC 15 0 TEXT 31 0 NTSC/PAL-RF NTSC/PAL-VIDEO 7 5 480i/576i/Scart-RGB(50/60Hz 480p/576 1080i-50/60/720 NTSC/PAL 㧿-inpu NTSC/PAL/480i/576i/ޓMultipicture 7 1 480p/576p/1080i-50/60/720 HD-except HD 7 1 HD-HD 7 4 NT-* /PAL-* 7 1 HD-* 7 4 2pictures 7 4 4pictures/12pictures 7 1 HD-except HD 7 3 HD-HD 7 4 NT-* /PAL-* 7 4 HD-* 7 4 2pictures 7 3 4pictures/12pictures 7 4 NTSC/PAL(-except RF)/480i/576i 15 15 480p/576 1080i-50/60/720 PAL(-RF)/ޓMultipicture 15 15 NTSC/PAL/480i/576i/ޓMultipicture 3 3 480p/576 1080i-50/60/720 NTSC/PAL/480i/576i/ޓMultipicture 7 7 480p/576p/1080i-50/60/720 NTSC/PAL/480i/576i/ޓMultipicture 1 1 480p/576p/1080i-50/60/720 NTSC/PAL/480i/576i/ޓMultipicture 15 15 480p/576p/1080i-50/60/720 NTSC/PAL/480i/576i/ޓMultipicture 63 0 480p/576p/1080i-50/60/720 NTSC/PAL(-except RF)/480i/576i 15 15 480p/576 1080i-50/60/720p-60 15 PAL(-RF)/ޓMultipicture 15 15 NTSC/PAL/480i/576i/ޓMultipicture 3 2 480p/576 1080i-50/60/720 NTSC/PAL/480i/576i/ޓMultipicture 7 7 480p/576p/1080i-50/60/720 NTSC/PAL/480i/576i/ޓMultipicture 1 0 480p/576p/1080i-50/60/720 RF/ޓMultipicture 15 4 NTSC/PAL-VIDEO 15 4 480i/576i/Scart-RGB(50/60Hz 480p/576p/1080i-50/60/720 NTSC/PAL/480i/576i/ޓMultipicture 63 0 480p/576p/1080i-50/60/720 NTSC/PAL/480i/576i/ޓMultipicture 3 2 480p/576 1080i-50/60/720
For Dynamic 71 62 For Natural 71 62 For Cinema 71 51 For Dynamic 62 31 For Natural 62 31 For Cinema 62 33 For Dynamic 62 36 For Natural 62 31 For Cinema 62 21 For Dynamic 30 20 For Natural 30 15 For Cinema 30 10
icture 15 2
ޓMulti
icture 15 8
ޓMulti
icture 7 7
15 15
15 1 15 1
15 15
15 15 15 15
74 71 71 74
71
15 4 15 15
30 32
70
10
15 8
63 0
15 15 15
30 32
77
10
15 10 15 1
63 0
32 32
 : should be followed previous data
Changed Component
19
42PD7200 (PW2)
p.(
p.(
(
])
(
])
(
])
(
])
(
])
(
])
(
])
(
])
(
])
p
)
p
p)
p
p)
p
)
p
)
(CM)
p)
(CM)
p)
(CM)
p)
(CM)
p)
(CM)
p)
(CM)
p)
p
p
p
)L
p
'
p
L
p
p
p
p
L
p
L
)
 : shoule be adjusted
 : should be followed previous data
ADJ Function Max. Default
No. Value FORMATTER VIDEO TUNER PDP
184 Menu Init. Color Temp.(Cool[0]/Normal[1]/Warm[2]/B&W[3])For Dynamic 3 0 185 Menu Init. Color Tem 186 Menu Init. Color Tem 187 Menu Init. Black stretch 188 Menu Init. Black stretch 189 Menu Init. Black stretch 190 Menu Init. YNR 191 Menu Init. YNR 192 Menu Init. YNR 193 Menu Init. LTI 194 Menu Init. LTI 195 Menu Init. LTI 196 Center of Shar 197 Center of Shar 198 Center of Shar 199 Center of Shar 200 Center of Shar 201 Color Center 202 Color Center 203 Color Center 204 Tint Center 205 Tint Center 206 Tint Center 207 Shar 208 Shar 209 Shar 210 Shar 211 Shar 212 Shar 213 Shar 214 Shar 215 Shar 216 Shar 217 Sharpness Gain(S.VIDEO
Off[0]/Low[1]/Mid.[2]/High[3 Off[0]/Low[1]/Mid.[2]/High[3 Off[0]/Low[1]/Mid.[2]/High[3
ness Gain(RF) BG/DK/I Main 15 8 ness Gain(RF) M Main 15 8 ness Gain(RF ness Gain(RF) L ness Gain(VIDEO) PA ness Gain(VIDEO) NTSC3.58 Main 15 10 ness Gain(VIDEO) SECAM,B/W Main 15 8 ness Gain(VIDEO) NTSC4.43 Main 15 8 ness Gain(VIDEO) N-PA ness Gain(VIDEO) M-PA
ADJ. Items Mode PWB PWB PWB PANEL
Cool[0]/Normal[1]/Warm[2]/B&W[3])For Natural 3 1 Cool[0]/Normal[1]/Warm[2]/B&W[3])For Cinema 3 2
Off[0]/Low[1]/Mid.[2]/High[3 Off[0]/Low[1]/Mid.[2]/High[3
Off[0]/Low[1]/Mid.[2]/High[3 Off[0]/Low[1]/High[2 Off[0]/Low[1]/High[2 Off[0]/Low[1]/High[2
ness(HV Enhancer Gain for Y) HDMI(480i/576i ness(HV Enhancer Gain for Y) HDMI(480p/576 ness(HV Enhancer Gain for Y) HDMI(720 ness(HV Enhancer Gain for Y) HDMI(1080i-50/60 ness(HV Enhancer Gain for Y) HDMI(VGA
For Dynamic 3 2 For Natural 3 1 For Cinema 3 0 For Dynamic 2 0 For Natural 2 0 For Cinema 2 0 For Dynamic 3 2 For Natural 3 1 For Cinema 3 0
HDMI-YCbCr(50Hz:576i/576 HDMI-YCbCr(60Hz:480i/480 HDMI-YPbPr(1080i-50/60/720 HDMI-YCbCr(50Hz:576i/576 HDMI-YCbCr(60Hz:480i/480 HDMI-YPbPr(1080i-50/60/720
Main 15 8 Main 15 8 Main 15 10
Main 15 8 Main 15 8 Main 15 7
31 10 31 10 31 6 31
31 10 127 65 127 65 127 65 254 126 254 126 254 126
15218 Horizontal HPF Peak Frequency 720p-50 5
6
Changed Component
Factory Reset
After all of the adjustments of main chassis are finished, perform FACTORY RESET.
Press the SUB-POWER( ) button, INPUT SELECT( ) button and button at the same time, and hold for
more than 5 seconds.
The unit is set to factory settings.
20
Loading...
+ 46 hidden pages