HITACHI 42PD7500, 42PD7500A Service Manual

SERVICE MANUAL MANUEL D'ENTRETIEN WARTUNGSHANDBUCH

CAUTION:

Before servicing this chassis, it is important that the service technician read the “Safety Precautions” and “Product Safety Notices” in this service manual.

ATTENTION:

Avant d’effectuer l’entretien du châassis, le technicien doit lire les «Précautions de sécurité» et les «Notices de sécurité du produit» présentés dans le présent manuel.

SM007

42PD7500(PW2) 42PD7500A(PW2)

Data contained within this Service manual is subject to alteration for improvement.

Les données fournies dans le présent manuel d’entretien peuvent faire l’objet de modifications en vue de perfectionner le produit.

VORSICHT:

Vor Öffnen des Gehäuses hat der Service-Ingenieur die „Sicherheitshinweise“ und „Hinweise zur Produktsicherheit“ in diesem Wartungshandbuch zu lesen.

Die in diesem Wartungshandbuch enthaltenen Spezifikationen können sich zwecks Verbesserungen ändern.

SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT

Plasma Television

June 2005

42PD7500/42PD7500A (PW2)

CAUTION FOR SAFETY

Please read this page before repair the monitor. This page explains to following items for keep the safety of set and prevent to accident during repair work.

We explain by symbol at happen the damage or injury when took wrong repair.

Warning

Caution

We made the symbol as below, which are kind of following items.

This symbol means "CAUTION"

This symbol means "POSSIBLE to

ELECTRIC SHOCK"

This symbol means "possible to die or heavy damage"

This symbol means "possible to damage or something will break"

This symbol means "MUST"

This symbol means "DO NOT"

WARNING

Should be follows to instructions.

We indicates to cabinet, chassis and parts

by label, which are special attention part.

Please follow to note and [Safety Instructions]

of User’s Manual.

Prevent the electric shock.

Please take care during working because

monitor has high voltage part and power

supply part.

Possible to die if you touch to these place

by miss take.

Please disconnect power plug during

overhaul, reassemble or change parts.

You will die or take damage by electric

shock if you touch to live part.

Use recommended components.

Please use to same characteristic compo-

nent, which is same as previous for your

safety and keep reliability especially marked

in parts list and circuit diagram.

by

It is reason of electric shock or fire if you

use non-recommended component.

Should be kept same style of wiring or component.

Monitor uses tubes or tapes, which made

by insulator, and some components are

keep distance from surface of PWB for

safety.

Internal leads kept from hot part or high voltage

part by clamper or styling, so please return to

original condition for prevent to electric shock

or fire.

Should be done safety check after finished.

Every part (removed screws, component

and wiring) should be returned to previous

condition.

Check around repair position for make

damage by miss take and measure the

insulated impedance by meg-ohm meter.

Confirm the value of impedance, that

value is more than 4M ohm.

It is reason for electric shock or fire if that

value is less than 4M ohm.

Nobody can check and repair to the code and combination circuit of HDCP.

Never remove the shield case, which is

assembled to the code and combination

circuit of HDCP.

1

42PD7500/42PD7500A (PW2)

PRECAUTIONS

How to clean the plasma screen panel of the monitor

Before cleaning the monitor, turn off the monitor and disconnect the power plug from the power outlet. To prevent scratching or damaging the plasma screen face, do not knock or rub the surface with sharp or hard objects. Clean the screen with a soft cloth moistened with warm water and dry with a soft cloth. If it is not enough, then use a cloth with mild detergent. Do not use harsh or abrasive cleaners.

How to clean the cabinet of the monitor

Use a soft cloth to clean the cabinet and control panel of the monitor. When excessively soiled dilute a neutral detergent in water, wet and wring out the soft cloth and afterward wipe with a dry soft cloth. Never use acid/alkaline detergent, alcoholic detergent, abrasive cleaner, powder soap, OA cleaner, car wax, glass cleaner, etc. especially because they would cause discoloration, scratches or cracks.

Information for users applicable in European Union countries

This symbol on the product or on its packaging means that your electrical and electronic equipment should be disposed at the end of life separately from your household wastes. There are separate collection systems for recycling in EU. For more information, please contact the local authority or the dealer where you purchased the product.

1. Features

Large-screen, high-definition plasma display panel

The 42-inch color plasma display panel, with a resolution of 1024 (H) x 1024 (V) pixels, creates a high-definition, large-screen(aspect ratio : 16:9) and low-profile flat display. Free from electromagnetic interferences from geomagnetic sources and ambient power lines, the panel produces high-quality display images free from color misconvergence and display distortion.

High Performance Digital Processor

A wide range of input signals can be handed,including composite, component,and HDMI.High Definition Digital Processor creates the fine-textured image with dynamic contrast. In addition, it corresponds to a broad array of personal computer signals, from 640 x 400 and 640 x 480 VGA to 1600 x 1200 UXGA.(Analog Input)

Easy-to-use remote control and on screen display system

The remote control included eases the work of setting display controls. Further, the on-screen display system, displays the status of signal reception and display control settings in an easy-to-view fashion.

Connecting to an Audio Visual Device

• Two Scart terminals A composite video output terminal is also provided as a monitoring output.

*1

AV1 scart applies to composite/ S-video AV2 applies to composite/ RGB

*2

A composite/S terminal = Side Input

*3

With AV3 input, if a composite terminal and a component terminal are used at the same time, the component terminal would govern.

• A wide range of devices can be also connected besides personal computers.

*1

, composite/S terminal*2, a component terminal*3, and a HDMI terminal have been added.

Power Swivel Feature

It allows turning the plasma display left or right within ±30 degree using the remote control.

2

42PD7500/42PD7500A (PW2)

Digital Terrestrial Television Broadcasting

Converting into digital signal enables to provide more channels and various useful features, such as Electric Programme Guide, Digital Teletext, and so on. Further, digital signal can create high quality picture.

This logo indicates that the product is compliant with European Digital Broadcasting. DVB is a registered trademark of the DVB Project.

This logo indicates that the product is set up to view digital terrestrial TV. FREEVIEW and the FREEVIEW logo are trade marks of DVT Services Ltd and are used under license. FREEVIEW Logo © DTV Services Ltd 2002.

This logo indicates that the product will work after implementation of full digital switchover. The Digital logo is a Certification Mark.

3

2. Specifications

42PD7500/42PD7500A (PW2)

Display

Panel

Net dimensions (excluding Speakers/Stand)

Net weight (excluding Speakers/Stand)

Ambient conditions

Power supply

Power consumption/at standby

Audio output

(RGB input)

Input terminals

Input signals

Sync signals

Recommended signal

(Video input)

Input terminals

Input signals

dimensions Resolution

Temperature

Relative humidity

Approx. 42 inches (922 (H) x 522 (V) mm, diagonal 1059mm)

1024(H) x 1024 (V) pixels

1050 (W) x 676 (H) x 128 (D) mm

38.0kg

Operating : 5˚C to 35˚C, Storage : 0˚C to 40˚C

Operating : 20% to 80%, Storage : 20% to 90% (non-condensing)

AC220 - 240V, 50Hz

380W / <3W

speaker 12W + 12W (6Ω),

RGB1 DVI input terminal (DVI-D) RGB1 audio input terminal (3.5mm Stereo Mini Jack) RGB2 analogue RGB input terminal (D-sub 15-pin) RGB2 audio input terminal (3.5mm Stereo Mini Jack)

0.7 V/1.0 Vp-p, analogue RGB (Recommended Signal) 480i, 576i, 480p, 576p, 1080i/50, 1080i/60, 720p/50*

H/V separate, TTL level [2KΩ] H/V composite, TTL level [2KΩ] Sync on green, 0.3 Vp-p [75 Ω]

44 modes

AV1: composite video /S video / L/R audio input terminal (SCART) AV2: composite video /RGB / L/R audio input terminal (SCART) AV3: composite video / Y/P AV4: composite video /S video / L/R audio input terminal (RCA) AV5: HDMI input terminal

AV1: PAL, SECAM, NTSC3.58, NTSC4.43 AV2: PAL, SECAM, NTSC3.58, NTSC4.43, RGB AV3: PAL, SECAM, NTSC3.58, NTSC4.43 AV3: 480i, 576i, 480p, 576p, 720p/50, 720p/60, 1080i/50, 1080i/60, AV4: PAL, SECAM, NTSC3.58, NTSC4.43 AV5: HDMI input signal

B /PR video / L/R audio input terminal (RCA)

1

, 720p/60

OUTPUT (MONITOR): composite video monitor-output terminal (RCA)

Output Signal

Recommended signal

(RF input)

Input terminals

RF Video System

• The monitor takes at least 30 minutes to attain the status of optimal picture quality.

1

*

720p/50 does not support RGB2.

2

The SECAM D, K system might not be normally received, depending on the model.

*

OUTPUT (MONITOR): L/R audio monitor- output terminal (RCA) OUTPUT (HEADPHONE): L/R audio monitor- output terminal (Mini-pin) AV1: composite video / L/R audio monitor /DTT/TV output terminal (SCART)

24 modes

ANT : 75Ω Unbalanced

PAL B, G, H / I / D, K SECAM B, G / K1 / L, L’ / (D, K)* DVB-T

Applicable video signals for each input terminal

Applicable video signals for input terminal

Terminal

Signal CVBS S-video

AV1

AV2

AV3

AV4

AV5

RGB1

RGB2

RCA/S-video/SCART

Component SCART (RGB)

2

HDMI

DVI

PC STB RGB

D-sub

Component

4

42PD7500/42PD7500A (PW2)

3. Service points

Lead free solder

This product uses lead free solder (unleaded) to help preserve the environment. Please read these instructions before attempting any soldering work.

Caution: Always wear safety glasses to prevent fumes or molten solder from getting into the eyes. Lead free

solder can splatter at high temperatures (600˚C).

Lead free solder indicator

Printed circuit boards using lead free solder are engraved with an "F."

Properties of lead free solder

The melting point of lead free solder is 40-50˚C higher than leaded solder.

Servicing solder

Solder with an alloy composition of Sn-3.0Ag-0.5Cu or Sn-0.7Cu is recommended. Although servicing with leaded solder is possible, there are a few precautions that have to be taken. (Not taking these precautions may cause the solder to not harden properly, and lead to consequent malfunctions.)

Precautions when using leaded solder

Remove all lead free solder from soldered joints when replacing components.

If leaded solder should be added to existing lead free joints, mix in the leaded solder thoroughly after the lead

free solder has been completely melted (do not apply the soldering iron without solder).

Servicing soldering iron

A soldering iron with a temperature setting capability (temperature control function) is recommended. The melting point of lead free solder is higher than leaded solder. Use a soldering iron that maintains a high stable temperature (large heat capacity), and that allows temperature adjustment according to the part being serviced, to avoid poor servicing performance.

Recommended soldering iron:

Soldering iron with temperature control function (temperature range: 320-450˚C)

Recommended temperature range per part:

Part Soldering iron temperature

Mounting (chips) on mounted PCB 320˚C±30˚C

Mounting (chips) on empty PCB 380˚C±30˚C

Chassis, metallic shield, etc. 420˚C±30˚C

The PWB assembly which has used lead free solder

FILTER PWB, SW PWB, LED/RECEIVER PWB, SP TERMINAL(L/R) PWB

AUDIO PWB, JOINT PWB, Swievel PWB, HDMI PWB, control PWB

VIDEO PWB, I/F A PWB, I/F B PWB, DTT PWB

TUNER PWB

Readjustment Power supply voltage When a PANEL or a Power Unit is exchanged, power supply voltage needs to be adjusted. Please adjust to

make the values of Va and Vs of as should on the label currently stuck on the panel back upper parts.Adjustment is performed by VR in the power supply unit. Please refer to the procedures of “Va” and “Vs” adjustments on 22page.

5

4. Component names

[Main unit]

Control panel

• Adjustment buttons are located on the bottom.

• The back cover is provided with indications to distinguish the adjustment buttons.

+

-

VOLUME UP/DOWN buttons ( ADJUST buttons)

SUB-POWER button

• ( ) indicates the function while the MENU is displayed on the screen.

SELECT button

42PD7500/42PD7500A (PW2)

MENU button

INPUT SELECT button

(OK button)

Remote-control receiver

Indicating lamp

• The main power switch is located at the back, on the lower surface.

Main power switch

[Remote control]

VOLUME UP/DOWN button

PROGRAMME SELECT buttons

POWER button

INPUT SELECT buttons

MENU button

OK button

SOUND MODE button

FREEZE/MULTI MODE

button

TV/TEXT button

RECALL button

FUNCTION SELECT button

DVD CONTROL buttons

RETURN button

CURSOR button

PICTURE MODE button CH I/CH II button

CHANNEL UP/DOWN button MUTE button

MULTI PICTURE button

SWIVEL button

CLE-966

6

42PD7500/42PD7500A (PW2)

5. New adoption technology

[System control micom I001(M30627)]

Pin function table

No. PIN MANE I/O

1

2

3

4

5

6

7

8 DATA_OUT(FC)

9 DATA_IN(FC)

10 CLK(FC)

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

VREF (+5.0V) I

+5.0V I

NC I/O

OSD_DATA I/O

OSD_CLK I/O

HP_VOL

FE.AGC_O(M) I/O

EDID_PROTECT I/O

TRAP_MAIN I/O

GND I

CNVSS(FLASH)I

DSUB COMP I/O

RGBSW I/O

RESET I

16MHz oscillation O

GND I

16MHz oscillation I

+5.0V I

NMI(+5.0V) I

RMCON(AVC) I/O

V.FREQ_2(VIDEO) I/O

V.FREQ_1/3 I/O

SCV.SYNC I/O

IRQ䋨PM-IRQ) I/O

MCV.SYNC I/O

POWER_LED I/O

H.FREQ_2(VIDEO) I/O

PDP_WVGA_LCD_SW_2 I/O

H.FREQ_1/_3 I/O

PDWN

RXD2 I/O

TXD2 I/O

TXD1(RS232C/FLASH) I/O

RXD1(RS232C/FLASH) I/O

SCLK(FLASH) I/O

BUSY(FLASH) I/O

TXD0(PDP) I/O

RXD0(PDP) I/O

SDA4(panel) I/O

SCL4(panel) I/O

M_ENABLE I/O

M_SCLK I/O

M_SDA I/O

M_WAKEUP I/O

PDPGO(PM_ON) I/O

I/O

FUNCTION

5V

NC

OSD DATA

OSD CLK

Head Phone Volume

AGC Voltage(F/E) FC DATA

FC DATA

FC CLOCK

Memory Protect

TRAP-MAIN GND

CNVSS(FLASH)

SYNC-SW

RESET

OSC-OUT

GND

OSC-IN

5V

5V PULL UP

IR Signal

TA1370(LA7213), COMPONENT2

TA1370(LA7213), COMPONENT(Main)/ DSUB COMPONENT

CVBS for SYNC Detection(Sub Picture)

PANEL MODULE Condition(L:Normal,H:Erroe)

CVBS for SYNC Detection(Main Picture) L䋺LED ON(Power Save)

TA1370(LA7213), COMPONENT2

PDP/42WVGA/LCD detection

TA1370(LA7213), COMPONENT1(Main), D-SUB

RESERVE(LVDS Power Down mode(PANEL)) NC

NC

DATA(RS-232C)

5V

I

DATA(RS-232C)

GND

I

CLOCK(FRASH MEMORY Writing)

BUSY(FRASH MEMORY Writing)

DTT

2

I

C-BUS Contorol DATA

2

I

C-BUS Contorol CLOCK

Media Enable

Media Clock

Media Data

Media Wakeup

PDP PALEL Contorol

7

42PD7500/42PD7500A (PW2)

No. PIN MANE I/O FUNCTION

CPUGO(PM_CPU) I/O

51

52

53

54

55

56

57

58

59

60

61

62

63

64

65

66

67

68

69

70

71

72

73

74

75

76

77

78

79

80

81

82

83

84

85

86

87

88

89

90

91

92

93

94

95

96

97

98

99

100

EPM (FLASH) I/O

VIDEO.DET_1 I/O

SCL1 I/O

SDA1 I/O

HDMI-RESET I/O

HDMI-HPD_RESET I/O

VIDEO.DET_2 I/O

VIDEO.DET_3 I/O

TUNER.DET_1 I/O

CE (FLASH) I/O

STAND.CIR_DET I/O

SW_L_OUT I/O

SW_R_OUT I/O

M_SW I/O

INITIALIZE I/O

D.RESET(DARST) I/O

DVI-PD I/O

SCDT I/O

HS-DJTR I/O

DVI-SW I/O

CUR_PRTCT I/O

SPRLY I/O

MUTE I/O

ASEL1 I/O AUDIO Signal SW

ASEL2 I/O AUDIO Signal SW

SDA2 I/O

SCL2 I/O

D-SUB COMP_SYNC.SW I/O

BM_SW I/O

RGB_BLK_2 I/O NC

RGB_BLK_3 I/O NC

AUD RST I/O

PDP_WVGA_LCD_SW_1 I/O

+5.0V I

RGB1_DET I/O NC

GND I

WSS_1 I/O NC

WSS_2 I/O NC

WSS_3 I/O NC

TV.AFC(S) I/O AFC Voltage(Sub TUNER)

TV.AFC(M) I/O

FE_AGC_I(M) I/O AGC Voltage(Main TUNER)

FE_AGC_I(S) I/O

HP_DETECT I/O

HDMI_DET I/O

INT_HDMI I/O

NC I/O NC

COMP_SW I/O

DEMP_OUT I/O

PDP PALEL Contorol

FRASH MEMORY Writing

Detecting VIDEO PWB I2C䋨to PWB TUNER side䋩 FE/MSP3455or MSP3415G/SAA5361/TB1274(Sub)/M306V7/M62320P I2C䋨to PWB TUNER side䋩 FE/MSP3455or MSP3415G/SAA5361/TB1274(Sub)/M306V7/M62320P

HDMI-Reset

Hot Plug Detect Reset

Detecting VIDEO PWB

Detecting TUNER PWB FRASH MEMORY Writing

Detecting SWIVEL PWB

SWIVEL(L-output)

SWIVEL(R-output) Discriminate terminal of bridge media circuit connecting.

Initializing EEPROM

RESET(DVI)

DVI Contorol

Detecting Powre-SWIVEL SP ON/OFF Relay Control

MUTE

I2C(NJW1163,AD7414,TA1370)

SYNC-SW BM switch

RESET for LIPSYNC IC

PDP/42WVGA/LCD detection

GND

AFC Voltage(Main TUNER)

AFC Voltage(Sub TUNER)

HEAD PHONE DETECT

HDMI 5V DET

INT(HDMI)

Component SW Main 㹤 DSUB

deemphasis control output for HDMI

8

42PD7500/42PD7500A (PW2)

No. PIN MANE I/O FUNCTION

101

102

103

104

105

106

107

108

109

110

111

CONTROL I/O

SCL0 I/O

SDA0 I/O

SCL3(EEPROM) I/O

SDA3(EEPROM) I/O

HDMI_CIR_DET I/O

EXT_RESET I/O

OSD_CS I/O

FC_ENABLE I/O

NC I/O

112 IRQ_DTT

113 DTT_POWER

114 DISPEN

115

116

117

HDMI_A_SW I/O

SCL5 I/O

SDA5 I/O

118 FUNC_1

119 FUNC_2

120 NC

121

122

123

124

125

126

127

128

AD_KEY3 I/O

AD_KEY2 I/O

AD_KEY1 I/O

TV.POWER I/O

DIP.DET I/O

POWER_SAVE I/O

GNDI

FAN_ALARM

LCD PANEL

2

C-BUS Contorol CLOCK

I

2

I

C-BUS Contorol DATA

I2C-BUS Contorol CLOCK

I2C-BUS Contorol DATA

Detecting HDMI circuit connection

EXTERNAL RESET

OSD CS

FC ENABLE

NC

DTT IRQ

I/O

DTT POWER

I/O

DISPEN

I/O

HDMI AUDIO SW

2

I

C-BUS Contorol CLOCK

2

I

C-BUS Contorol DATA

I/O

Function 1

I/O

Function 2

I/O NC

AD KEY3

AD KEY2

AD KEY1(INPUT) POWER ON/OFF(H:ON䇮L:STANDBY)

DIP DET POWER ON/OFF(L䋺ON(STANDBY䍃POWER SAVE), H䋺OFF)

GND

FAN ALARM

I/O

9

D D

Block diagram

42PD7500/42PD7500A (PW2)

10

TT TT

*5A

42PD7500/42PD7500A (PW2)

6. Adjustment

● How to get to Adjustment mode

Using the front control buttons with the set turned off (standby) can activate it.

Press the SUB-POWER(

more than 5 seconds.

The set turns on in adjustment mode with OSD.

● Changing data and Selecting Adjustment code

When the set is in adjustment mode, the cursor , , , and OK buttons of the remote control or front panel

may be used as the adjustment keys.

, buttons are used for selecting adjustment code.

, buttons are used for changing data values.

OK button is used for confirming the data.

After finishing the necessary adjustment press MENU button. Adjustment mode is released and the set returns to

normal condition.

● Memory Initialize operation

NOTE: The execution of this function returns the adjustment codes to the preset values, therefore, adjustment

data will be lost.

Procedure

(1) Enter Adjustment Mode.

(2) Select MEMORY INIT adjustment code (No.658) and change the data value from 0 to 1.

(3) Activate MEMORY INIT by pressing OK button for more than 3 seconds.

(4) Select No.525 and change data value from 1 to 0.

(5) Check that the receiving channel goes to P1. Unit is set to preset values.

) button, INPUT SELECT( ) button and button at the same time, and hold for

11

42PD7500/42PD7500A (PW2)

_

)

_

)

_

)

_

)

_

)

_

)

_

)

r

p

)

p

e

play

(

e

(

e

(

g

e

g

y

(

)

(

)

(

)

(

)

p

)

p

e

p

e

)

p

e

p

e

p

e

p

e

p

e

p

e

p

[

]

e

[

]

[

]

)

[

]

[

]

[

]

[

]

[

]

[

]

)

[

]

[

]

p

[

]

p

(

)[

]

(

)[

]

[

]

[

]

p

g

]

g

]

p

(

]

(

]

q

]

q

]

[

]

[

]

[

]

[

]

g

]

g

]

p

0

p

0

p

0

p

Service adjustment items by I

ADJ Function Max. Default

No value FORMATTER VIDEO TUNER PDP

CONTRAST(RF

0SUB 1SUB

CONTRAST(AV1

2SUB

CONTRAST(AV2

3SUB

CONTRAST(AV3

4SUB

CONTRAST(AV4

5SUB

CONTRAST(AV5

6SUB

CONTRAST(RF 7 Sub Colo 8 Sub Colo 9 TINT (RF) Main 63 33

10 TINT (VIDEO) Main 63 33 11 TINT (RF) Sub 63 33 12 TINT (VIDEO) Sub 63 33 13 Free 14 Free 15 Free 16 Free 17 Reference Am 18 Reference Am 19 Reference Am 20 Dis 21 Dis 22 Offset Value 23 Offset Value 24 Offset Value 25 Ter 26 Ter 27 Set Blue Gamma 28 Contrast mode<D 29 Select for WIDE Mode 11 30 PinP Function 31 Black Level 32 Black Level 33 Black Level 34 Black Level 35 YNR In 36 YNR In 37 YNR In 38 YNR In 39 YNR In 40 YNR In 41 YNR In 42 YNR In 43 CNR In 44 CNR In 45 CNR In 46 CNR In 47 CNR In 48 CNR In 49 CNR In 50 CNR In 51 CNR In 52 CNR In 53 main/sub YFRNR level 54 main/sub YFRNR level 55 main/sub YFRNR level 56 main/sub YFRNR level 57 main/sub YFRNR level 58 main/sub YFRNR level 59 main/sub CFRNR level 60 main/sub CFRNR level 61 main/sub CFRNR level 62 main/sub CFRNR level 63 main/sub CFRNR level 64 main/sub CFRNR level 65 B-Y/B!\R-Y/R 66 B-Y/B!\R-Y/R 67 DSB Gain of Vertical for B-Y/B!\R-Y/R 68 DSB Gain of Vertical for B-Y/B!\R-Y/R 69 DSB corin 70 DSB corin 71 B-Y/B!\R-Y/R 72 B-Y/B!\R-Y/R 73 Horizontal HPF Peek Fre 74 Horizontal HPF Peek Fre 75 Horizontal Enhancer Gain for B-Y/B,R-Y/R 76 Horizontal Enhancer Gain for B-Y/B,R-Y/R 77 Horizontal DSB Gain for B-Y/B,R-Y/R 78 Horizontal DSB Gain for B-Y/B,R-Y/R 79 Horizontal DSB Corin 80 Horizontal DSB Corin 81 Horizontal Enhancer Cli 82 Horizontal Enhancer Cli 83 B-Y Clam 84 R-Y Clam 85 B-Y Clam 86 R-Y Clam 87 B-Y Clam 88 R-Y Clam 89 B-Y Clam 90 R-Y Clam 91 B-Y Clam 92 R-Y Clam 93 B-Y Clam 94 R-Y Clam 95 P/N ID Main 1 0 96 P/N ID Sub 1 0 97 Shar 98

Bandwidth 1

99

Bandwidth 2

litude(RGB_AMP litude(RGB_AMP) PC 254 127

litude(RGB_AMP) Multi Picture mod for Max. Amplitude Level Main - for Max. Amplitude Level Sub - -

+/-) of Upper Limit (for FC :RGB-AMP ) Multi Picture mod +/-) of Upper Limit (for TB1274:SUB-CONT) Single Picture mod

+/-) of Upper Limit (for TB1274:Sub Color) 18 2 et value of White peak Adj.Sin et value of Color Level Adj.(for TB1274:Sub Color) 237 235

ness Gain(RF/NR) Main/Sub 15 2

ain On/Off 0:Off, 1:On(For 55V) For 55V 1 1

namic> SW (TV) 0:Dynamic, 1:Dynamic+Auto RF 1 1

for PC) 0:PinP, 1:Infomation1, 2:Infomaiton Split 2 0 RGB_AMP RGB_AMP RGB_AMP RGB_AMP

ut Level for AV1-5 Mode RF 7 7 ut Level for AV1-5 Mode VIDEO 7 7 ut Level for AV1-5 Mode Scart-RGB(50/60Hz ut Level for AV1-5 Mode 480i/576i 7 7 ut Level for AV1-5 Mode 480p/576 ut Level for AV1-5 Mode 1080i-50/60/720 ut Level for DVI-STV Mode 480i/480p/576i/576p/VGA 7 7 ut Level for DVI-STV Mode 1080i-50/60/720 ut Level at Low level for AV1-5 Mod ut Level at Low level for AV1-5 Mod ut Level at Low level for AV1-5 Mod ut Level at Low level for AV1-5 Mod ut Level at Low level for AV1-5 Mod ut Level at Low level for DVI-STV Mode 480i/480p/576i/576p/VGA 7 2 ut Level at Low level for DVI-STV Mode 1080i-50/60/720 ut Level at Low level for Dsub Comp. Mod ut Level at Low level for Dsub Comp. Mod ut Level at Low level for Dsub Comp. Mod

VER. Enhancer Gain

of Vertical for B-Y/B!\R-Y/R[CVDSBC0 of Vertical for B-Y/B!\R-Y/R[CVDSBC1

VRE. Enhancer) CLIP 0:CTI[CVECLP0

VRE. Enhancer) CLIP 0:CTI[CVECLP1

offset NTSC/PAL/480i/576i/480p/576p 255 128 offset NTSC/PAL/480i/576i/480p/576p 255 128 offset 1080i-50/6 offset 1080i-50/6 offset 720 offset 720 offset[DVI-STB] 480i/576i/480p/576p/VGA 255 128 offset[DVI-STB] 480i/576i/480p/576p/VGA 255 128 offset[DVI-STB] 1080i-50/6 offset[DVI-STB] 1080i-50/60 255 128 offset[DVI-STB] 720 offset[DVI-STB] 720p 255 128

ADJ. Items Mode PWB PWB PWB PANEL

MYNRP0 MYNRP5 MYNRP6' MYNRP6 MYNRP7 MYNRP8 MCNRP0 MCNRP5 MCNRP6' MCNRP6 MCNRP7 MCNRP8

. SW for B-Y/B,R-Y/R[CHHPF0 . SW for B-Y/B,R-Y/R[CHHPF1

for B-Y/B,R-Y/R[CHDSBC0 for B-Y/B,R-Y/R[CHDSBC1

for B-Y/B,R-Y/G 0:CTI[CHECLP0] NTSC/PAL/480i/576i/Multipicture 1 0 for B-Y/B,R-Y/G 0:CTI[CHECLP1] 480p/576p/1080i-50/60/720p 1 0

CVEG0

CVEG1 CVDSBG0 CVDSBG1

CHEG0

CHEG1 CHDSBG0 CHDSBG1

2

C-bus control (MAIN Part)

Main 15 8 Main/Sub Composite mode 15 8 Main/Sub Composite mode 15 8 Main/Sub Composite mode 15 8 Main/Sub Composite mode 15 8 Main/Sub Composite mode 15 8 Sub 15 8 Main 15 8 Sub 15 8

RF/VIDEO 254 127

254 130

18 2 18 2

le Picture mod

RF/VIDEO 254 127 PC 254 127 HDMI 254 127 For USA NTSC/480i 254 127

RF/VIDEO 7 4 Scart-RGB(50/60Hz 480i/576i 7 4 480p/576 1080i-50/60/720

480i/576i 7 2 480p/576 1080i-50/60/720 NTSC/PAL/ Multipictur NTSC/PAL-VIDEO 7 0 Scart-RGB(50/60Hz 480i/576i(Except HDMI) 480p/576p(Except HDMI) 1080i-50/60/720p(Except HDMI) NTSC/PAL/ 7 0

Multi NTSC/PAL-VIDEO 7 0 Scart-RGB(50/60Hz 480i/576i 7 0 480p/576 1080i-50/60/720 NTSC/PAL/480i/576i/Multipicture15 15 480p/576p/1080i-50/60/720p 15 9 NTSC/PAL/480i/576i/Multipicture30 480p/576p/1080i-50/60/720 NTSC/PAL/480i/576i/Multipicture70 480p/576p/1080i-50/60/720 NTSC/PAL/480i/576i/Multipicture10 480p/576p/1080i-50/60/720p 1 0 NTSC/PAL/480i/576i/Multipicture32 480p/576p/1080i-50/60/720p 3 2 NTSC/PAL/480i/576i/Multipicture15 15 480p/576p/1080i-50/60/720p 15 9 NTSC/PAL/480i/576i/Multipicture30 480p/576p/1080i-50/60/720p 3 0 NTSC/PAL/480i/576i/Multipicture 7 0 480p/576p/1080i-50/60/720p 7 0

DTT DTT

237 235

77

77 77

77

74

74 74

72

72 72 71

70 70 70 70

70

70 70

30

70

255 128 255 128 255 128 255 128

255 128

3 3

Ο : shoule be adjusted ∆ should be followed previous data

2 2

Changed Component

12

42PD7500/42PD7500A (PW2)

p

)

p

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

_Q(

)

_f0(

)

_

)

p

(RF)

_DL(

)

_DL(

)

_DL(

)

_DL(

)

_DL(

)

_DL(

)

_DL(

)

_DL(L)

_DL(L')

_DL(

)

_DL(

)

_DL(

)

_DL(

)

_DL(

)

_DL(

)

_DL(

)

_DL(

)

_DL(

)

_DL(

)

_DL(L)

_DL(L')

_DL(

)

_DL(

)

_DL(

)

(

)

Ο : shoule be adjusted

ADJ Function Max. Default

No value FORMATTER VIDEO TUNER PDP

100

Sub Contrast 1 Sub Contrast 2

101

Sub Color 1

102

Sub Color 2

103 104

Main H.sync phase adj.

105

Sub H.sync phase adj. 106 Free 107 Free 108 Free 109 Free 110 Shar

ness Gain(RF) BG/DK/I Sub 15 8

111 Shar

ness Gain(RF) M Sub 15 8

112 Shar

ness Gain(RF) L Sub 15 8

113 Shar

ness Gain(RF) L' Sub 15 8

114 Shar

ness Gain(VIDEO) PAL Sub 15 8

115 Shar

ness Gain(VIDEO) NTSC3.58 Sub 15 8

116 Shar

ness Gain(VIDEO) SECAM,B/W Sub 15 8

117 Shar

ness Gain(VIDEO) NTSC4.43 Sub 15 8

118 Shar

ness Gain(VIDEO) N-PAL Sub 15 8

119 Shar

ness Gain(VIDEO) M-PAL Sub 15 8

120 Shar

ness Gain(S.VIDEO 121 Free 122 Shar

ness f0(RF) BG/DK/I Main/Sub 3 2 123 Shar

ness f0(RF) M Main/Sub 3 2 124 Shar

ness f0(RF) L Main/Sub 3 2 125 Shar

ness f0(RF) L' Main/Sub 3 2 126 Shar

ness f0(VIDEO) PAL Main/Sub 3 2 127 Shar

ness f0(VIDEO) NTSC3.58 Main/Sub 3 2 128 Shar

ness f0(VIDEO) SECAM,B/W Main/Sub 3 2 129 Shar

ness f0(VIDEO) NTSC4.43 Main/Sub 3 2 130 Shar

ness f0(VIDEO) N-PAL Main/Sub 3 2 131 Shar

ness f0(VIDEO) M-PAL Main/Sub 3 2 132 Free 133 Y Out Level M 134 Y Out Level B/G 135 Y Out Level D/K 136 Y Out Level I 137 Y Out Level L 138 Y Out Level L' 139 Y Out Level 140 Y Out Level 141 Free 142 Y Out Level M 143 Y Out Level B/G 144 Y Out Level D/K 145 Y Out Level I 146 Y Out Level L 147 Y Out Level L' 148 Y Out Level 149 Y Out Level 150 Free 151 C Out Level M 152 C Out Level B/G 153 C Out Level D/K 154 C Out Level I 155 C Out Level L 156 C Out Level L' 157 C Out Level 158 C Out Level 159 Free 160 C Out Level M 161 C Out Level B/G 162 C Out Level D/K 163 C Out Level I 164 C Out Level L 165 C Out Level L' 166 C Out Level 167 C Out Level 168 Free 169 BPF 170 BPF 171 C

TRAP_SW(COMB=OFF-PAL/NTSC4.43/NTSC3.58 172 LPF Main/Sub 1 0 173 SECAM D-Tra 174 FILTER SW 175 Y 176 Y 177 Y 178 Y 179 Y 180 Y 181 Y 182 Y 183 Y 184 Y 185 Y 186 Y 187 Y 188 Y 189 Y 190 Y 191 Y 192 Y 193 Y 194 Y 195 Y 196 Y 197 Y 198 Y 199 NTSC Comb

4.5

5.5

6.5

6.0

6.5

6.5 VIDEO TEXT

4.5

5.5

6.5

6.0

6.5

6.5 VIDEO TEXT

4.5

5.5

6.5

6.0

6.5

6.5 VIDEO TEXT

4.5

5.5

6.5

6.0

6.5

6.5 VIDEO TEXT

4.43MHz

4.5MHz

5.5MHz PAL/NTSC4.43

5.5MHz SECAM

6.0PAL/NTSC4.43

6.0SECAM

6.5PAL/NTSC4.43

6.5SECAM

VIDEO PAL/NTSC4.43 VIDEO SECAM VIDEO NTSC

4.5MHz

5.5MHz PAL/NTSC4.43

5.5MHz SECAM

6.0PAL/NTSC4.43

6.0SECAM

6.5PAL/NTSC4.43

6.5SECAM

VIDEO PAL/NTSC4.43 VIDEO SECAM VIDEO NTSC

Comb off

ADJ. Items Mode PWB PWB PWB PANEL

DTT DTT DTT DTT DTT DTT

Sub 15 10

Main 63 15 Main 63 13 Main 63 16 Main 63 14 Main 63 13 Main 63 16 Main 63 15 Main 63 0

Sub 63 19 Sub 63 13 Sub 63 12 Sub 63 13 Sub 63 12 Sub 63 15 Sub 63 13 Sub 63 4

Main 63 7 Main 63 7 Main 63 7 Main 63 7 Main 63 8 Main 63 8 Main 63 15 Main 63 6

Sub 63 3 Sub 63 8 Sub 63 8 Sub 63 7 Sub 63 7 Sub 63 7 Sub 63 10 Sub 63 8

Main/Sub 3 3 Main/Sub 3 1 Main/Sub 1 0

Main/Sub 1 1 Main/Sub 1 0 Main 10 6 Main 10 4 Main 10 0 Main 10 8 Main 10 9 Main 10 6 Main 10 10 Main 10 5 Main 10 5 Main 10 6 Main 10 8 Main 10 6 Sub 10 5 Sub 10 2 Sub 10 0 Sub 10 7 Sub 10 5 Sub 10 5 Sub 10 5 Sub 10 5 Sub 10 5 Sub 10 5 Sub 10 5 Sub 10 5 Sub 1 1

255 255

15 15 15 15

∆ should be followed previous data

0 0 0

0 101 101

Changed Component

13

42PD7500/42PD7500A (PW2)

)

AFC_

)

AFC_

)

AFC_

)

AFC_

)

AFC_

)

AFC_

)

AFC_

)

_

_V_

p

_

p

_

0

_

p

_

0

_

p

_

0

_

p

_

p

_

0

_

A

_

p

_50

_

p

_50

_

A

k

m

n

Ο : shoule be adjusted

ADJ Function Max. Default

No value FORMATTER VIDEO TUNER PDP

200 Cb offset1 Main 15 8 201 Free 202 Cr offset1 Main 15 8 203 Free 204 Cb offset1 Sub 15 8 205 Free 206 Cr offset1 Sub 15 8 207 Free 208 MVM!㨬VIDEO 209

GAIN(AV00

210

GAIN(AV1

211

GAIN(AV2

212

GAIN(AV3

213

GAIN(AV4 GAIN(AV5

214 215

GAIN(Except AV00

216 S

B-Y_ADJ Main 15 8

217 S

R-Y_ADJ Main 15 8

218 S

B-Y_ADJ Sub 15 8

219 S

R-Y_ADJ Sub 15 8

220 BELL

f0 Main/Sub 1 0

221 S

INHBT

222 S

ID

223 S

GP

224 S

ID 225 BELL/HPF 226 HS Phase Main 1 0 227 HS Phase Sub 1 0 228 Bandwidth 1 NTSC/PAL/480i/576i 3 2 229 Bandwidth 1 480 230 Bandwidth 1 1080i-50/60/720p 3 0 231 Bandwidth 2 NTSC/PAL/480i/576i 3 2 232 Bandwidth 2 480 233 Bandwidth 2 1080i-50/60/720p 3 0 234 Sub Contrast 1 Exce 235 Sub Contrast 1 HDMI 15 0 236 Sub Contrast 2 Exce 237 Sub Contrast 2 HDMI 15 0 238 Sub Color 1 Exce 239 Sub Color 1 HDMI 15 0 240 Sub Color 2 Exce 241 Sub Color 2 HDMI 15 0 242 HV THRU 1 NTSC/PAL/480i/576i/480 243 HV THRU 1 1080i-50/60/720p 1 0 244 HV THRU 2 NTSC/PAL/480i/576i/480 245 HV THRU 2 1080i-50/60/720p 1 0 246 H

SEP 1 RF/VIDEO 1 0

247 H

SEP 1 480i/576i 1 0

248 H

SEP 1 480p/576

249 H

SEP 1 1080i_5

250 H

SEP 1 1080i_60/720p 1 0

251 H

SEP 2 RF/VIDEO 1 0

252 H

SEP 2 480i/576i 1 0

253 H

SEP 2 480p/576

254 H

SEP 2 1080i_5

255 H

SEP 2 1080i_60/720p 1 0

256 V

SEP 1 RF/VIDEO 1 0

257 V

SEP 1 480i/576i 1 0

258 V

SEP 1 480p/576

259 V

SEP 1 1080i_5

260 V

SEP 1 1080i_60/720

261 V

SEP 2 RF/VIDEO 1 0

262 V

SEP 2 480i/576i 1 0

263 V

SEP 2 480p/576

264 V

SEP 2 1080i_5

265 V

SEP 2 1080i_60/720p 1 0

266

FC MODE 1 RF 3 0

267

FC MODE 1 VIDEO 3 0

268

FC MODE 2 RF 3 0

269

FC MODE 2 VIDEO 3 0

270 N

LVL 1 RF 1 0

271 N

LVL 1 VIDEO 1 0 LVL 2 RF 1 0

272 N 273 N

LVL 2 VIDEO 1 0 274 Free 275 HD POSITION 1 480i/576i 15 0 276 HD POSITION 1 480 277 HD POSITION 1 1080i 278 HD POSITION 1 1080i 279 Free 280 HD POSITION 2 480i/576i 15 0 281 HD POSITION 2 480 282 HD POSITION 2 1080i 283 HD POSITION 2 1080i 284 Y LPF 1 RF 1 1 285 Y LPF 1 VIDEO 1 1 286 Y LPF 2 RF 1 1 287 Y LPF 2 VIDEO 1 1 288 Gain 1 11 289 Gain 2 11 290 YCS MODE NTSC3.58 3 0 291 3D DET 77 292

FC Gain NTSC3.58 3 0 293 2D-CNR 294 2D-CNR Li 295 GMCON 10 296 Y-NC 10 297 Y-NC Li 298 2D-YNR k 30 299 2D-YNR Gai

ADJ. Items Mode PWB PWB PWB PANEL

     

    

/576

t HDMI 15 0

/576p 1 0

/576

60/720p 15 0

/576

60/720p 15 0

10 30 30 30 30 30 30 30

10 10 30 10 33

32

10 10

10 10 10

10 10

15 0 15 0

30 30

30

∆ should be followed previous data

Changed Component

14

42PD7500/42PD7500A (PW2)

m

p

o

p

A

X

S

t

p

S

p

S

p

S

p

S

p

y

p

V

p

A

_

p

S

p

A

p

y

p

V

p

A

 : shoule be adjusted

ADJ Function Max. Default

No value FORMATTER VIDEO TUNER PDP

300 2D-YNR Li 301 BLK EXP 30 302 CKILL 10 303 Out

ut Clam

304 In

ut Clamp aut 305 Int Clam 306 C-ENH 307 YC-MI 308 Video2 RGB Mode ON 309 HSWINV 10 310 Free 311 V-ENHA Gain NTSC3.58 3 2 312 V-ENHA NL NTSC3.58 3 2 313 H-ENHA Gain NTSC3.58 3 1 314 3DNR Corr for 3DYC 315 Burst ON for 2DYCS???? 10 316 MDMPL ޓ 10 317 MDMBL ޓ 10 318 H-MaskOu 319 V-MaskOut ޓ 70 320 In 321 In 322 Out 323 Out 324 V-ENHA Core NTSC3.58 3 0 325 In 326 Burst Gate Ke 327 S 328 H-WST NTSC3.58 7 3 329 HD Am 330 HD Gain 331 HD Am 332 HD Gain 1 NTSC3.58 31 8 333 HD Am 334 HD Gain 2 NTSC3.58 31 4 335 336 337 338 339 340 341 342 343 344 345 346 347 BCMSLP NTSC3.58 3 3 348 BCSSLP NTSC3.58 3 3 349 BYMSLP NTSC3.58 3 3 350 BYSSLP NTSC3.58 3 2 351 BCMESET NTSC3.58 3 2 352 BCMFSET NTSC3.58 3 2 353 BCSESET NTSC3.58 3 2 354 BCSFSET NTSC3.58 3 2 355 BYMESET NTSC3.58 3 3 356 BYMFSET NTSC3.58 3 3 357 BYSESET NTSC3.58 3 3 358 BYSFSET NTSC3.58 3 3 359 BCMUP NTSC3.58 1 1 360 CECMP NTSC3.58 7 4 361 CSCMP NTSC3.58 15 0 362 F1HER NTSC3.58 3 1 363 F1VER NTSC3.58 3 1 364 MREF NTSC3.58 15 2 365 CDEYE NTSC3.58 3 2 366 YDEYE NTSC3.58 3 2 367 MDS NTSC3.58 1 0 368 F-TBC OFF MDMPL NTSC3.58 1 0 369 REC:C 370 V-ENHA Gain Exce 371 V-ENHA NL Exce 372 H-ENHA Gain Exce 373 3D-CNR Lim for 2DYC 374 3D-CNR k for 2DYCS 30 375 3D-CNR Gain for 2DYC 376 3D-YNR Lim for 2DYC 377 3D-YNR k for 2DYCS 30 378 3D-YNR Gain for 2DYC 379 YCS MODE Exce 380 381 Free 382 Free 383 V-ENHA Core Exce 384 In 385 Burst Gate Ke 386 S 387 H-WST Exce 388 HD Am 389 HD Gain 390 HD Am 391 HD Gain 1 Exce 392 HD Am 393 HD Gain 2 Exce 394 395 396 397 398 399

Manual 10

ut Y-Delay(Main RF mode) for 3DYC

ut Y-Delay(Main Video mode) for 3DYC

ut-Y-Delay(Main RF Mode) for 3DYC ut-Y-Delay(Main Video Mode) for 3DYC

ut Clamp Ke

nc sep LPF NTSC3.58 1 0

1 NTSC3.58 7 6

2 NTSC3.58 7 1

3 NTSC3.58 7 5

CMSLP NTSC3.58 3 1 CSSLP NTSC3.58 3 2 YMSLP NTSC3.58 3 2 YSSLP NTSC3.58 3 2 CMESET NTSC3.58 3 3 CMFSET NTSC3.58 3 3 CSESET NTSC3.58 3 2 CSFSET NTSC3.58 3 2 YMESET NTSC3.58 3 3 YMFSET NTSC3.58 3 3 YSESET NTSC3.58 3 1 YSFSET NTSC3.58 3 3

DEC Except NTSC3.58 1 0

FC Gain Except NTSC3.58 3 0

ut Clamp Ke

nc sep LPF Except NTSC3.58 1 0

1 Except NTSC3.58 7 6

2 Except NTSC3.58 7 1

3 Except NTSC3.58 7 5

CMSLP Except NTSC3.58 3 2 CSSLP Except NTSC3.58 3 2 YMSLP Except NTSC3.58 3 0 YSSLP Except NTSC3.58 3 0 CMESET Except NTSC3.58 3 3 CMFSET Except NTSC3.58 3 3

ADJ. Items Mode PWB PWB PWB PANEL

ޓ 70

NTSC3.58 1 1 NTSC3.58 1 1

NTSC3.58 31 13

t NTSC3.58 3 2 t NTSC3.58 3 1 t NTSC3.58 3 1

t NTSC3.58 3 0

t NTSC3.58 3 0 Except NTSC3.58 1 1 Except NTSC3.58 1 1

t NTSC3.58 7 3

Except NTSC3.58 31 13

t NTSC3.58 31 8

t NTSC3.58 31 4

30

10 11

10 10

10

74

74 15 8 15 8

70

should be followed previous data

Changed Component

15

42PD7500/42PD7500A (PW2)

A

p

_

0

_

p

_

0

_

(

γ

(

)

(

)

(

)

g

g(

r

g(

p

n

g

]

y

n

y

n

g

t

g

r

y

r

A

y

s

p

(

A

)

A

)

A2_

)

_

)

_

)

A

)

_

A

_

)

AGC_

y

_H_

_V_

put[

]

_

Ο : shoule be adjusted

ADJ Function Max. Default

No value FORMATTER VIDEO TUNER PDP

400ACSESET Except NTSC3.58 3 2 401

CSFSET Except NTSC3.58 3 2

402

YMESET Except NTSC3.58 3 3 YMFSET Except NTSC3.58 3 3

403 404

YSESET Except NTSC3.58 3 1

405

YSFSET Except NTSC3.58 3 3 406 BCMSLP Exce 407 BCSSLP Exce 408 BYMSLP Exce 409 BYSSLP Exce 410 BCMESET Exce 411 BCMFSET Exce 412 BCSESET Exce 413 BCSFSET Exce 414 BYMESET Exce 415 BYMFSET Exce 416 BYSESET Exce 417 BYSFSET Exce 418 BCMUP Exce 419 CECMP Exce 420 CSCMP Exce 421 F1HER Exce 422 F1VER Exce 423 MREF Exce 424 CDEYE Exce 425 YDEYE Exce 426 MDS Exce 427 F-TBC OFF MDMPL Exce 428 SEPA

LEVEL_DSUB 480i/576i 3 2

429 SEPA

LEVEL_DSUB 480p/576p 3 2

430 SEPA

LEVEL_DSUB 1080i_5

431 SEPA

LEVEL_DSUB 1080i_60/720p 3 2 432 HD-PHASE 433 HD-PHASE 434 HD-PHASE 435 HD-PHASE 436 Heat APC function 437 438 439 Select for APC function 10 440 CCFMD function RF/VIDEO 1 0 441 CCFMD function DVI-PC/DVI-STB/DSUB-RGB 1 0 442 NTSC/EBU 443 NTSC/EBU 444 NTSC/EBU 445 Correction for Trackin 446 Correction for Trackin 447 Correction for Trackin 448 Color Tem 449 Bri 450 D 451 D 452 Histo 453 Histo 454 Histo 455 D 456 FC6 THROUGH 0:OFF, 1:THROUGH ON 10 457 458 459 HD/VD OUTPUT LEVEL 11 460 ISM Control for WVGA For WVGA 1 1 461 Swivel Demo mode on 462 WVGA BRIGHTNESS For WVGA 1 0 463 Black insert function 0:Not available, 1:Available For LCD D 464 D 465 DVI-STB Setu 466 HSYNC De-Jitter 0:Low 467 HSYNC De-Jitter 0:Low 468 DTT LOG Enable (Reserved) 469 470 471 472

473 PRE_AM

474 VOL 475 VOL 476 PRE 477 PRE 478 PRE 479 PRE

480 PRE_FM

481 PRE

482 PRE_FM

483 PRE 484 PRE 485 CM 486 CM 487 488 TEXT H s 489 TEXT V s 490 TEXT 491 TEXT 492 Select for APC out 493 L 494 DVI-RNG 495 HDMI EDID WRITE ENABLE 0:Disenable, 1:Enable 1 1 496 BPMA : Back Porch Mode,Field2 11

DSUB 480i/576i 63 20 DSUB 480p/576 DSUB 1080i_5 DSUB 1080i_60/720p 63 20

-select(0:1.0, 1:2.2, 2:2.8) RF/VIDEO 2 1

-select(0:1.0, 1:2.2, 2:2.8) DVI-PC/DVI-STB/DSUB-RGB 2 1

htness Limitted Function of PANEL [APSON namic Back Light Correctio namic Contrast Correctio

ram Color Managemen ram Gradation Amp. 11 ram Enhance

namic Enhance

PL Enhancer 0:OFF, 1:ON For Dynamic mode 1 1 TC INPUT RED SELECT 10

namic Backlight function 0:No, 1:Ye

UTO_FM/AM(D11-D8 UTO_FM/AM(D 7-D0

THRESHOLD(D11-D8)

THRESHOLD(D 7-D0

SCART1(D15-D8) SCART1(D 7-D5)

SCART FM 4.5MHz(JAPAN FM 4.5MHz(Except BTSC-SAP mode)254 32 FM 4.5MHz(BTSC-SAP

FM 4.5MHz(KORE

FM Except 4.5MHz(Dual/Stereo mode) 254 27

NICAM THRESHOLD(D15-D8) THRESHOLD(D7 -D0

LEVEL AGCL 30

PLL.GAIN 10

HAPC) available 11

CCFORM CCFORM CCFORM

. Correctio

0:None VGA/Others Yes, 1:All none 2:All have DVI-STB 2 0

nc delay

nc delay POSITION POSITION

ADJ. Items Mode PWB PWB PWB PANEL

t NTSC3.58 3 3 t NTSC3.58 3 3 t NTSC3.58 3 3 t NTSC3.58 3 2 t NTSC3.58 3 2 t NTSC3.58 3 2 t NTSC3.58 3 2 t NTSC3.58 3 2 t NTSC3.58 3 3 t NTSC3.58 3 3 t NTSC3.58 3 3 t NTSC3.58 3 3 t NTSC3.58 1 1 t NTSC3.58 7 4 t NTSC3.58 15 0 t NTSC3.58 3 1 t NTSC3.58 3 1 t NTSC3.58 15 2 t NTSC3.58 3 2 t NTSC3.58 3 2 t NTSC3.58 1 0 t NTSC3.58 1 0

32

63 20 63 20

SD(YCbCr)/Scart-RGB 1 0 HD(YPbPr

(DCBON) RF/VIDEO-Color Temp. Cool 1 1

DCBON) RF/VIDEO-Color Temp. Nor/Wa DCBON) DVI-PC/DVI-STB/DSUB-RGB 1 1

Disabled), 1:High(Enabled) DVI-PC 1 0 Disabled), 1:High(Enabled) DVI-STB 1 0

Except Europe model

DVI-PC/DVI-STB/DSUB-RGB 1 0

For LCD 1 1

namic mode or Day 1 0

For LCD 1 1

   

Except 4.5MHz (Except Dual/Stereo mode

  

4.5MHz(Except KORE Dual/Stereo mode

Except 4.5MHz(Except Dual/Stereo mode)

  

   

Main RF 2 1



Dual/Stereo) 254 34



10

11

32 11

11 11

50 0

10

254 189

15 0

254 112

254 17

254 115

70 254 31 254 34

254 60

254 36

254 17

254 57 254 0 254 36

127 0 127 50 254 42 254 39

11

∆ should be followed previous data

Changed Component

16

42PD7500/42PD7500A (PW2)

gepump

t

g

p

a

K

D

yp

D

p

)

p

)

play

)

play

n

A

)

t

(

)

p

t

(s)

e

y

r

(

)

y

)

e

n

(

)

s

p

e

S

y

S

e

(

)

guage(

)

(

)

A

)

t

(

)

(

)

A

)

(

)

(

)

(

)

j

y

pen(

)

g

e

g

e

g

e

p

s

e

p

s

e

p

s

e

p

s

p

s

e

[Dy

e

[

e

[

e

[Dy

e

[

e

[

e

y

x

play

g

)

y

l

y

l

e

y

l

y

l

e

y

l

pp

l

pp

l

e

pp

l

 : shoule be adjusted

ADJ Function Max. Default

No value FORMATTER VIDEO TUNER PDP

497 VCORA : VCO range select 30 498 CRNTA : chan 499 TESTA : Matchin 500 PRMB : 501 HDCP : HDCP enable criteri 502 SMPLING For CCD 255 0 503 POLLING For CCD 255 15 504 START For CCD 7 2 505 TIMEOUT For CCD 30 5 506 STATUS For CCD 7 2 507 CCD-HP For CCD 79 40 508 CCD-CL 509 Horizontal Position of OS 510 Vertical Position of OSD 15 7 511 Free 512 T

ical Value of Contrast OS 513 Free 514 Tem

erature for Fun start (Temp_High

515 Tem

erature for Fun stop(Temp_Low 516 Dis 517 Dis 518

ccumulation time for Panel (hours

519 Reset function of accumulation time for WVGA/LCD Panel 0:Normal 1:Rese

520 Power Save/Screen Saver On/Off Setting at Initialize, Reset and Shipping

521 PC Power Save function 522 Screen Saver-Picture shift amount 0:1 523 Screen Saver-Picture shift Direction 0:dia /1:cross /2:u 524 Waite Time for POWER SAVE function 525 BURN-IN enable/ disenabl 526 BURN-IN mod 527 Recover 528 EURO DK-SECAM MASK 529 Set Sound S

Power condition at power save mode of PC mod

530

after done RESET function Select Wide mode for Europe model

531

Normal= 5mode/ For Service= 10 mode 532 Thermo sensor function available or not 0:None, 1:Ye 533 Video In 534 EURO SOUND SYSTEM DK Disable 0:Enable 1:Disabl 535 Remote Function available 0:NO, 1:YE

Function available 0:NO, 1:YE

536 Ke 537 DVI-STB/RGB-COMPONENT Function available 0:NO, 1:YES 1 0 538 Terminal Mode Function available 0:Not Available, 1:Availabl 539 Select color control 540 Lan 541 Hotel Mode 542

nalog Data (0:Keep EEPROM, 1:Not Keep to EEPROM 543 Maximum Volume Limi 544 Power Mode 545 Free 546 Channel Select 547

uto_sound 4.5 (0:Korea, 1:BTSC, 2:Japan 548 T/TEXT 549 Free 550 Channel Preset 551 V FREQ 60Hz Force 552 Offset value of ad 553 Use "TINT Offset↑" 0:No, 1:Yes For COMPAL factor 554 PDP-BLK ON/OFF 1:ON, 0:OFF 1 0 555 IIC BUS Data/Clock O 556 Protect for Ima 557 Protect for Ima 558 Protect for Ima 559 Dis

ersion Time of Sustain current 0:2 Times, 1:4 time ersion Time of Sustain current 0:2 Times, 1:4 time

560 Dis 561 Dis

ersion Time of Sustain current 0:2 Times, 1:4 time

562 Dis

ersion Time of Sustain current 0:2 Times, 1:4 time

563 Dis

ersion Time of Sustain current 0:2 Times, 1:4 time 564 Q mode 0:Freeze, 1:Move 1, 2:Move 2 For 50Hz 565 Q mode 0:Freeze, 1:Move 1, 2:Move 2 For 50Hz 566 Q mode 0:Freeze, 1:Move 1, 2:Move 2 For 50Hz 567 Q mode 0:Freeze, 1:Move 1, 2:Move 2 For 60Hz 568 Q mode 0:Freeze, 1:Move 1, 2:Move 2 For 60Hz 569 Q mode 0:Freeze, 1:Move 1, 2:Move 2 For 60Hz 570 Q mode 0:Freeze, 1:Move 1, 2:Move 2 For 70Hz(PC) 2 0 571 Main/Sub YFRNR passage level [MYNRP6] 572 573 574

Dummy575

575 576 Gra

level of BM Inde 577 Dis 578 TA1391: SYNC SW Chan 579 Free 580 Free 581 Countin 582 Countin 583 Countin 584 Lower Limits value for S 585 Lower Limits value for S 586 Lower Limits value for S 587 Lower Limits value for S 588 Lower Limits value for S 589 U

er Limits Value for Sync Detect of 2ms interva

590 U

er Limits Value for Sync Detect of 2ms interva

591 U

er Limits Value for Sync Detect of 2ms interva

Test to allow increment of stability counter. 1 1

reamble criteri

of internal temperature (Temperature of Panel map versio

to an error of OSC frequency of Ceramic resonator for time

stem at Auto mode of Sound Sys.(0:auto, 1:4.5MHz

ut function available or not at RGB1 & RGB2 mod

0:Asia, 1:South America

Refer to below

0:No, 1:Yes

0:Last mode, 1:Pos1, 2-7:V1-6, 8-9:RGB1-2

0:CCIR, 1:CHINA

0:None, 1:Yes

0:VESTEL, 1:GIFU, 2:HAMA, 3:HFDM, 4:AUSTRALIA

usted TINT For COMPAL factor

e Retention 0:Off, 1:7%, 2:14%, 3:21%, 4:AUTO Dynamic mod e Retention 0:Off, 1:7%, 2:14%, 3:21%, 4:AUTO Natural mod e Retention 0:Off, 1:7%, 2:14%, 3:21%, 4:AUTO Cinema mod

of BM version 127 -

time for discrimination of fH(M30625/TA1370) 㧙 31 2 time for discrimination of fV(M30625/TA1370) 㧙 31 2 time for discrimination of fV(TB1274

ADJ. Items Mode PWB PWB PWB PANEL

current selec

0:Impossible, 1:Possible

V=60) 0:Normal 1:Mask(V=60

0:None, 1:Yes

0:Close, 1:Open

e

nc Detect of 2ms interva nc Detect of 2ms interva nc Detect of 2ms interva nc Detect of 2ms interva nc Detect of 2ms interva

ixel㧛1:2pixel㧛2:3pixel 2 0

[MYNRP7] [MYNRP8] [MYNRP8']

/down /3:left/righ

For CCD 79 57

DYNAMIC 31 31

P.S/S.S 0:Off/20m 1:On/Off

2:Off/Off

VIDEO/PC 254 15 0:Disenable, 1:Enabl

Main 1 0 0:Keep last condition, 1:Return to normal conditio

0:Normal, 1:For service 1 0

0:Not Available, 1:Availabl

RS232C 1 1 Main/Sub 1 0

For Dynamic mod For Natural mod For Cinema mod For PC mode 1 1 For PC-Movie mod

480i/576i (HDMI) 480p/576p (HDMI) 1080i-50/720p-50 (HDMI) 1080i-60/720p-60 (HDMI)

0:SYNC, 1:HDVD1&2

㧙 31 2 For AFC at TV mode 254 25 For Free Running at TV mod For AUTO OFF at TV mode 254 25 For Free Running at AV mod For Power Save at AV mode 254 5 For AFC at TV mode 254 40 For Free Running at TV mod For AUTO OFF at TV mode 254 35

namic] mod Natural] mod Cinema] mod

70

31 6 31 12

15 7

254 58 254 55 125 255 -

65535 -

10

20

11

30

11 22

62 34

10

10 11 10 11 11

60 20 10

63 63

90

10 20 11

41 10

20 11

10

10 44 44 44 10 11 11

11 21 21 21 21 21 21

70 70 71 70

-

31 4

10

254 30

254 45

should be followed previous data

-

Changed Component

17

42PD7500/42PD7500A (PW2)

l

e

pp

l

(

(Hz)

(

)

(

)

(

)

(

g

t

g

t

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

(

)

y

(

)"

y

g

_

yp

y

o

y)

j

)

j

r

A

g

e

A

)

A

)

A

e

(

)

j

 : shoule be adjusted

ADJ Function Max. Default

No value FORMATTER VIDEO TUNER PDP

592 Upper Limits Value for Sync Detect of 2ms interva 593 U

er Limits Value for Sync Detect of 2ms interva 594 V detection 595 H detection 596 V detection 597 H detection 598 COLOR SYSTEM CONTROL-MODE 599 COLOR SYSTEM CONTROL-MODE 600 Countin 601 Countin 602 TB1274 Read Data 603 TB1274 Read Data 604 TB1274 Read Data 605 TB1274 Read Data 606 MSP Read Data 607 MSP Read Data 608 MSP Read Data 609 MSP Read Data 610 MSP Read Data 611 MSP Read Data 612 TA1391FG Read Data 613 TA1391FG Read Data 614 TA1391FG Read Data 615 TA1391FG Read Data 616 TA1391FG Read Data 617 TA1391FG Read Data 618 TA1391FG Read Data 619 TA1391FG Read Data 620 TA1370G Read Data 621 TA1370G Read Data 622 SiI9993 Read Data SYNC1 : VSYNC/Clock detect/S 623 SiI9993 Read Data NHRDL1 : N hardware value 1 -624 SiI9993 Read Data NHRDM1 : N hardware value 1 -625 SiI9993 Read Data NHRDH1 : N hardware value 1 -626 SiI9993 Read Data CHRDL1 : CTS hardware value 1 - 627 SiI9993 Read Data CHRDM1 : CTS hardware value 1 - 628 SiI9993 Read Data CHRDH1 : CTS hardware value 1 - 629 SiI9993 Read Data ACR1 : ACR PLL hardware value 1 - 630 SiI9993 Read Data ACRS1 : ACR PLL hardware value 1 - -

631

632 SiI9993 Read Data CLKFRQ1: Clock Accurac 633 SiI9993 Read Data ALNG1 : Audio len 634 SiI9993 Read Data MT 635 SiI9993 Read Data VTYP1 : AVI infoframe t 636 SiI9993 Read Data VVER1 : AVI infoframe version code 1 - 637 SiI9993 Read Data VINFO11: AVI infoframe data 1 -638 SiI9993 Read Data VINFO21: -639 SiI9993 Read Data VINFO31: -640 SiI9993 Read Data VINFO41: -641 SiI9993 Read Data VINFO51: -642 SiI9993 Read Data ATYP1 : AUDIO InfoFrame T 643 SiI9993 Read Data AVER1 : AUDIO InfoFrame Version Code 1 - 644 SiI9993 Read Data AINFO11: AUDIO InfoFrame Data B 645 SiI9993 Read Data AINFO21: -646 SiI9993 Read Data AINFO31: -647 SiI9993 Read Data AINFO41: -648 SiI9993 Read Data AINFO51: -649 Initialize function for EEPROM of Video PWB board 10

650 Check condition of EEPROM of Video PWB board

651 W/B Initialize 1652 Gain ad 653 Gain ad 654 655 656 657 658 EEPROM Initialize 659 Enter to SUB ad 660 Enter to service menu of FC sub mi-con --

Format PWB㧕 0:out of range, 128:NO V(or out of spec),50/60

Format PWB㧕 0:out of range, 128:NO H(or out of spec), 15/28/31/33/45(kHz

VideoPWB㧕 0:out of range, 128:NO V(or out of spec), 255:interrupt 50/60(Hz

Video PWB㧕 0:out of range, 128:NO H(or out of spec), 15/28/31/33/45(kHz

Value of 2ms Sync.Detec Value of 2ms Sync.Detec

00h 01h 00h

01h CNTROL)(D15-D8 CNTROL)(D 7-D0 STANDARD_RES)(D15-D8 STANDARD_RES)(D 7-D0 STATUS)(D15-D8 STATUS)(D 7-D0

00h 01h

SiI9993 Read Data SFREQ1 : "Extracted Sampling Frequency 1 channel status b24-27

ustment of RGB amplifier(FLAON

ustment of RGB amplifie utomatic White Peak Adj.Sin utomatic Color Level Adj.(TB1274BF utomatic Color Level Adj.(TB1274BF utomatic White Peak Adj. Multi Picture mod

0:No, 1:Yes

ust menu --

ADJ. Items Mode PWB PWB PWB PANEL

0:BW, 2:3.58NTSC, 3:4.43NTSC, 㨯㨯㨯)Main - 0:BW, 2:3.58NTSC, 3:4.43NTSC, 㨯㨯㨯)Sub - -

00h 01h 02h 03h 04h 05h 06h 07h

nc detect 1 - -

same value at 0x30

MD1 : AV mute/HDMI mode 1 - -

/Sampling Frequency 1--

th/Audio length max 1 - -

e code 1 - -

e Code 1 - -

tes 1 - -

For Free Running at AV mod For Power Save at AV mode 254 200

Main - Sub - Main - Main - Sub - Sub - -

0:Normal, 1:Abnormal(Fail or n assembl

Main - - ǘ Sub - - ǘ

le Picture mod Main PAL/NTSC(COMPOSITE - Sub PAL/NTSC(COMPOSITE - -

254 45

255 255 255 255 -

--

1-

--

-10

should be followed previous data

Changed Component

18

42PD7500/42PD7500A (PW2)

[

]

[

]

[

]

[

]

[

]

[

]

[

]

[

]

[

]

[

]

[

]

[

]

[

]

[

]

[

]

[

]

[

]

[

]

[

]

[

]

[

]

[

]

[

]

[

]

g

)

/

p

g

)

g

)

p

g

)

p

g

)

g

)

g

)

g

)

g

)

g

t

A

g

t

A

g

t

A

g

t

A

g

t

A

g

t

(CM)

)

(CM)

)

(CM)

)

(CM)

)

(CM)

p)

(CM)

p)

(CM)

)

(CM)

)

(CM)

)

(CM)

)

(CM)

)

(CM)

)

(CM)

p)

(CM)

p)

(CM)

)

(CM)

p

)

p

)

p

)

p

)

p

)

p

)

p

)

p

)

p

)

p

)

p)

p

)

p)

p

)

p

)

(CM)

A

(CM)

A

(CM)

A

(CM)

A

(CM)

A

(CM)

p)

(CM)

p)

(CM)

)

(CM)

e

g

e

[

]

(

)[

]

[

]

p

Service

adjustment items by I

2

C-bus control (SUB adjust menu)

(*The change to a sub menu. press “ok” key after no.659 with a main menu)

 : shoule be adjusted

 : should be followed previous data

ADJ Function Max. Default

No. Value FORMATTER VIDEO TUNER PDP

0 R DRIVE1 1 G DRIVE1 2 B DRIVE1 3 R DRIVE2 4 G DRIVE2 5 B DRIVE2 6 R DRIVE3 7 G DRIVE3 8 B DRIVE3

9 R DRIVE4 10 G DRIVE4 11 B DRIVE4 12 R DRIVE1 13 G DRIVE1 14 B DRIVE1 15 R DRIVE2 16 G DRIVE2 17 B DRIVE2 18 R DRIVE3 19 G DRIVE3 20 B DRIVE3 21 R DRIVE4 22 G DRIVE4 23 B DRIVE4 24 Bri 25 Bri 26 Bri 27 Bri 28 Bri 29 Bri 30 Bri 31 Bri 32 Bri 33 Bri 34 Bri 35 Bri 36 Bri 37 Bri 38 Bri 39 Color Center 40 Color Center 41 Color Center 42 Color Center 43 Color Center 44 Color Center 45 Color Center 46 Color Center 47 Color Center 48 Tint Center 49 Tint Center 50 Tint Center 51 Tint Center 52 Tint Center 53 Tint Center 54 Tint Center 55 Tint Center 56 Tint Center 57 Tint Center 58 Tint Center 59 Center of Shar 60 Center of Shar 61 Center of Shar 62 Center of Shar 63 Center of Shar 64 Center of Shar 65 Center of Shar 66 Center of Shar 67 Center of Shar 68 Center of Shar 69 Center of Shar 70 Center of Shar 71 Center of Shar 72 Contrast Center 73 Contrast Center 74 Contrast Center 75 Contrast Center 76 Contrast Center 77 Contrast Center 78 Contrast Center 79 Contrast Center 80 Contrast Center 81 Contrast Center 82 Contrast Center 83 Contrast Center 84 Maximum Value of Contrast at REAL/NORMAL mod 85 Offset Value of Contrast data at SPLIT mode 120 53 86 Offset value of 87 Horizontal Enhanc 88 Vertical Enhance TEXT 3 3 89 Horizontal filter SW 90 91

RF/VIDEO/DSUB-COMP RF/VIDEO/DSUB-COMP

RF/VIDEO/DSUB-COMP

RF/VIDEO/DSUB-COMP RF/VIDEO/DSUB-COMP

RF/VIDEO/DSUB-COMP

RF/VIDEO/DSUB-COMP RF/VIDEO/DSUB-COMP

RF/VIDEO/DSUB-COMP

RF/VIDEO/DSUB-COMP RF/VIDEO/DSUB-COMP

RF/VIDEO/DSUB-COMP

DVI-PC/DVI-STB/DSUB-RGB DVI-PC/DVI-STB/DSUB-RGB

DVI-PC/DVI-STB/DSUB-RGB

DVI-PC/DVI-STB/DSUB-RGB DVI-PC/DVI-STB/DSUB-RGB

DVI-PC/DVI-STB/DSUB-RGB

DVI-PC/DVI-STB/DSUB-RGB DVI-PC/DVI-STB/DSUB-RGB

DVI-PC/DVI-STB/DSUB-RGB

DVI-PC/DVI-STB/DSUB-RGB DVI-PC/DVI-STB/DSUB-RGB

DVI-PC/DVI-STB/DSUB-RGB htness Center (CM htness Center (CM htness Center (CM htness Center (CM htness Center (CM htness Center (CM htness Center (CM htness Center (CM htness Center (CM htness center (CM) offse htness center (CM) offse htness center (CM) offse htness center (CM) offse htness center (CM) offse htness center (CM) offse

Enhancer Gain

ADJ. Items Mode PWB PWB PWB PANEL

ness(Y-Enhancer Gain for HV ness(Y-Enhancer Gain for HV ness(Y-Enhancer Gain for HV ness(Y-Enhancer Gain for HV ness(Y-Enhancer Gain for HV ness(Y-Enhancer Gain for HV ness(Y-Enhancer Gain for HV ness(Y-Enhancer Gain for HV ness(Y-Enhancer Gain for HV ness(Y-Enhancer Gain for HV ness(Y-Enhancer Gain for HV ness(Y-Enhancer Gain for HV ness(Y-Enhancer Gain for HV

ain for Black Stretch function Except OFF/LOW/HIGH mode 63 32

HHPF0

HHPF1

HHPF2

COOL 255 255 Ǎǘ COOL 255 255 Ǎǘ COOL 255 255 Ǎǘ NORMAL 255 255 Ǎǘ NORMAL 255 255 Ǎǘ NORMAL 255 255 Ǎǘ WARM 255 255 Ǎǘ WARM 255 255 Ǎǘ WARM 255 255 Ǎǘ BLACK & WHITE 255 255 Ǎǘ BLACK & WHITE 255 255 Ǎǘ BLACK & WHITE 255 255 Ǎǘ COOL 255 255 Ǎǘ COOL 255 255 Ǎǘ COOL 255 255 Ǎǘ NORMAL 255 255 Ǎǘ NORMAL 255 255 Ǎǘ NORMAL 255 255 Ǎǘ WARM 255 255 Ǎǘ WARM 255 255 Ǎǘ WARM 255 255 Ǎǘ BLACK & WHITE 255 255 Ǎǘ BLACK & WHITE 255 255 Ǎǘ BLACK & WHITE 255 255 Ǎǘ

ޓMulti

NTSC/PAL Scart-RGB(50/60Hz 480i/576i/480p/576 1080i-50/60/720 DVI-PC 254 128 DVI-STB 254 128 DSUB-RGB 254 128 Expand DSUB-RGB (Reserved HDMI 254 128

V1 254 127 V2 254 127 V3 254 127 V4 254 127

V5 254 127 DSUB-COMP 254 127 SD(YCbCr)(50Hz SD(YCbCr)(60Hz Scart-RGB(50/60Hz HD(YPbPr)(50/60Hz DVI-PC 127 64 DVI-STB(480i/576i/480p/576 DVI-STB(1080i-50/60/720 DVI-STB(VGA DSUB-RGB 127 64 PAL 254 125 Scart-RGB(50Hz Scart-RGB(60Hz SD(YCbCr)(50Hz SD(YCbCr)(60Hz HD(YPbPr)(50/60Hz DVI-PC 254 128 DVI-STB(480i/576i/480p/576 DVI-STB(1080i-50/60/720 DVI-STB(VGA DSUB-RGB 254 128 RF 31 10 VIDEO 31 15 Scart-RGB(50/60Hz 480i/576i 31 10 480p/576 720 1080i-50/60 31 10 TEXT(for split DVI-STB(480i/576i DVI-STB(480p/576 DVI-STB(720 DVI-STB(1080i-50/60 DVI-STB(VGA RF 254 137

V1 254 137

V2 254 137

V3 254 137

V4 254 137

V5 254 137 DVI-PC 254 128 DVI-STB(With Setu DVI-STB(Without Setu DSUB-RGB 254 128 Expand DSUB-RGB (Reserved DSUB-COMP 254 137

TEXT 3 3

NTSC/480i 1 0 PAL/576i 1 0 480p/576p/1080i-50/60/720

icture 254 128

254 128 254 128 254 124

254 128

127 72 127 68 127 70 127 70

127 62 127 62 127 62

254 121 254 120 254 123 254 130 254 135

254 128 254 128 254 128

31 14

31 15 31 6

31 19 31 14 31 10 31 6 31 10 31 10

254 149 254 128

254 128

254 188

10

Changed Component

19

42PD7500/42PD7500A (PW2)

]

(

)[

]

[

]

[

]

[

]

)

[

]

[

]

p

[

]

p

[

]

g

]

(

)[

]

[

]

[

]

[

]

)

[

]

[

]

p

[

]

p

[

]

g

C

g

]

[

]

[

]

)

[

]

p

[

]

p

[

]

t

g

]

[

]

p

]

(

)[

]

p

]

[

]

p

)[

]

[

]

p

]

(

)[

]

[

]

[

]

p

)[

]

[

]

[

]

[

]

p

[

]

p

[

]

[

]

[

]

p

[

]

p

g

]

[

]

p

]

[

]

p

]

[

]

p

g

]

[

]

p

[

]

[

]

p

[

]

[

]

[

]

[

]

p

[

]

p

g

]

[

]

p

]

[

]

p

]

[

]

[

]

)

[

]

p

g

]

[

]

p

q

]

[

]

p

[

]

p

A

(

])

(

])

(

])

g

])

g

])

g

])

(

])

(

])

(

])

p

])

p

])

p

])

Ο : shoule be adjusted

∆ : should be followed previous data

ADJ Function Max. Default

No. Value FORMATTER VIDEO TUNER PDP

92 Horizontal Coring Level [HECOR1

Enhancer Gain

93 94 95 96 97 98

99 100 101 Vertical Corin 102

Enhancer Gain 103 104 105 106 107 108 109 110 Enhancer 111 Corin 112 113 114 115 116 117 Corin 118

119 YFRNR in 120 HD-NTSC, HD-PAL 121 4 122 123 YFRNR in 124 125 CFRNR in 126 HD-NTSC, HD-PAL 127 128 129 CFRNR in 130 131 Vertical Enhancer Gain for Y/G 132 133 134 135 Vertical DSB Gain for Y/G 136 137 138 Vertical DSB Corin 139 140 Vertical Enhancer Cli 141 142 Vertical Cli 143 144 Vertical Non Linear Peakin 145 146 Horizontal Enhancer Gain for Y/R 147 148 149 150 Horizontal DSB Gain for Y/R 151 152 153 Horizontal DSB Corin 154 155 Horizontal Enhancer Cli 156 157 Horizontal Cli 158 159 160 161 Horizontal Non Linear Peakin 162 163 Horizontal HPF Peak Fre 164 165 166 Initial value of Contrast Extend 1 of Panel Life function 127 93 167 Interval time of correction time Extend 1 of Panel Life function 127 10 168

dditional value of Contrast Extend 1 of Panel Life function 127 1 169 Initial value of Contrast Extend 2 of Panel Life function 127 63 170 Interval time of correction time Extend 2 of Panel Life function 127 6 171

dditional value of Contrast Extend 2 of Panel Life function 127 1 172 Menu Init. Contrast 173 Menu Init. Contrast 174 Menu Init. Contrast 175 Menu Init. Bri 176 Menu Init. Bri 177 Menu Init. Bri 178 Menu Init. Color 179 Menu Init. Color 180 Menu Init. Color 181 Menu Init. Shar 182 Menu Init. Shar 183 Menu Init. Shar

Level[VECOR1

ain of VH for

Amplitude for Y/G[YC0R0

Amplitube for B-Y/B,R-Y/R[CC0R0

ut Gain(Main) 2pictures[MYNRG0

ut Gain(Sub

ut Gain(Main) 2pictures[MCNRG0

ut Gain(Sub

Offset Level[YVECLPL0

Offset Level for Y/R[YHECLPL0

htness(-31[0]+31[62 htness(-31[0]+31[62 htness(-31[0]+31[62

ADJ. Items Mode PWB PWB PWB PANEL

HECOR2 HECOR3 HECOR4 HECOR5' HECOR5 HECOR6 HECOR7 HECORPC

VECOR2 VECOR3 VECOR4 VECOR5' VECOR5 VECOR6 VECOR7 VECORPC

YC0R1 YC0R2 YC0R3 YC0R4 YC0R5

CC0R1

sub

ictures[MYNRG2

MYNRG3

YCNRG1

SUB

MCNRG2 MCNRG3

SCNRG1

YVEG1 YVEG2 YVEG3

YVDSBG1 YVDSBG2

for Y/G[YVDSBC0

YVDSBC1

for Y/G 0:LTI[YVECLP0

YVECLP1

YVECLPL1

YVNLP1

YHEG1 YHEG2 YHEG3

YHDSBG1 YHDSBG2

for Y/R[YHDSBC0

YHDSBC1

YHECLPL1 YHECLPL3 YHECLPL2

YHNLP1

YHHPF1 YHHPF2

-31[0]+40[71

-31[0]+31[62

-31[0]+31[62 ness(-15[0]+15[30 ness(-15[0]+15[30 ness(-15[0]+15[30

MYNRG1

YCNRG0

MCNRG1

SCNRG0

YVEG0

YVDSBG0

for Y/G[YVNLP0

YHEG0

YHDSBG0

for Y/R 0:LTI[YHDSBC0

for Y/G[YHNLP0

. SW for Y/R[YHHPF0

NTSC-RF 15 3 PAL-RF/Multipicture 15 2 NTSC-VIDEO 15 1 PAL-VIDEO 15 1 Scart-RGB(50/60Hz 480i/576i 15 2 480p/576 1080i-50/60/720 PC 15 1 NTSC-RF 15 1 PAL-RF/Multipicture 15 8 NTSC-VIDEO 15 1 PAL-VIDEO 15 1 Scart-RGB(50/60Hz 480i/576i 15 0 480p/576 1080i-50/60/720 PC 15 0 TEXT 31 0 NTSC/PAL-RF/Multipicture 7 7 NTSC/PAL-VIDEO 7 5 480i/576i/Scart-RGB(50/60Hz 480p/576 1080i-50/60/720 NTSC/PAL-inpu NTSC/PAL/480i/576i/ Multipicture 7 1 480p/576p/1080i-50/60/720 HD-except HD 7 1 HD-HD 7 4 NT-* /PAL-* 7 1 HD-* 7 4 2pictures 7 4 4pictures/12pictures 7 1 HD-except HD 7 3 HD-HD 7 4 NT-* /PAL-* 7 4 HD-* 7 4 2pictures 7 3 4pictures/12pictures 7 4 NTSC/PAL(-except RF)/480i/576i 15 15 480p/576 1080i-50/60/720 PAL(-RF)/Multipicture 15 15 NTSC/PAL/480i/576i/ Multipicture 3 3 480p/576 1080i-50/60/720 NTSC/PAL/480i/576i/ Multipicture 7 7 480p/576p/1080i-50/60/720 NTSC/PAL/480i/576i/ Multipicture 1 1 480p/576p/1080i-50/60/720 NTSC/PAL/480i/576i/ Multipicture 15 15 480p/576p/1080i-50/60/720 NTSC/PAL/480i/576i/ Multipicture 63 0 480p/576p/1080i-50/60/720 NTSC/PAL(-except RF)/480i/576i 15 15 480p/576 1080i-50/60/720p-60 15 PAL(-RF)/Multipicture 15 15 NTSC/PAL/480i/576i/ Multipicture 3 2 480p/576 1080i-50/60/720 NTSC/PAL/480i/576i/ Multipicture 7 7 480p/576p/1080i-50/60/720 NTSC/PAL/480i/576i/ Multipicture 1 0 480p/576p/1080i-50/60/720 RF/ Multipicture 15 4 NTSC/PAL-VIDEO 15 4 480i/576i/Scart-RGB(50/60Hz 480p/576p/1080i-50/60/720 NTSC/PAL/480i/576i/ Multipicture 63 0 480p/576p/1080i-50/60/720 NTSC/PAL/480i/576i/ Multipicture 3 2 480p/576 1080i-50/60/720

For Dynamic 71 62 For Natural 71 62 For Cinema 71 51 For Dynamic 62 31 For Natural 62 31 For Cinema 62 33 For Dynamic 62 36 For Natural 62 26 For Cinema 62 21 For Dynamic 30 20 For Natural 30 15 For Cinema 30 10

15 15

15 1 15 1

15 15

15 15 15 15

74 71 71 74

71

15 4 15 15

30 32

70

10

15 8

63 0

15 15 15

30 32

77

10

15 10 15 1

63 0

32 32

Changed Component

20

42PD7500/42PD7500A (PW2)

p.(

(

])

(

])

(

])

(

])

(

])

(

])

(

])

(

])

(

])

p

)

p

p)

p

p)

p

)

p

)

(CM)

p)

(CM)

p)

(CM)

p)

(CM)

p)

(CM)

p)

(CM)

p)

p

)L

p

'

p

L

p

L

p

L

Ο : shoule be adjusted

ADJ Function Max. Default No. Value FORMATTER VIDEO TUNER PDP

184 Menu Init. Color Temp.(Cool[0]/Normal[1]/Warm[2]/B&W[3])For Dynamic 3 0 185 Menu Init. Color Tem 186 Menu Init. Color Tem 187 Menu Init. Black stretch 188 Menu Init. Black stretch 189 Menu Init. Black stretch 190 Menu Init. YNR 191 Menu Init. YNR 192 Menu Init. YNR 193 Menu Init. LTI 194 Menu Init. LTI 195 Menu Init. LTI 196 Center of Shar 197 Center of Shar 198 Center of Shar 199 Center of Shar 200 Center of Shar 201 Color Center 202 Color Center 203 Color Center 204 Tint Center 205 Tint Center 206 Tint Center 207 Shar 208 Shar 209 Shar 210 Shar 211 Shar 212 Shar 213 Shar 214 Shar 215 Shar 216 Shar 217 Shar ness Gain S.VIDEO Main 15 7

Brightness Center (CM)

219

Color Center (CM)

220

Tint Center (CM)

221

Center of Sharpness (HV Enhancer Gain for Y)

222

Contrast Center (CM)

223

Horizontal Coring Amount [HECOR5’]

224

Vertical Coring Amount [VECOR5’]

225

Coring Amplitude for Y/G [YCOR2]

226

Vertical Enhancer Gain for Y/G [YVEG0]

227

Vertical DSB Gain for Y/G [YVDSBG0]

228

Vertical DSB Coring for Y/G [YVDSBC0]

229

Vertical CLIP Offset Level for Y/G [YVECLPL0]

230 231

Horizontal Enhancer Gain for Y/G [YHEG0] Horizontal DSB Gain for Y/G [YHDSBG0]

232 233

Horizontal DSB coring for Y/G [YHDSBC0]

234

Horizontal CLIP Offset Level for Y/G [YHECLPLP3]

Off[0]/Low[1]/Mid.[2]/High[3 Off[0]/Low[1]/Mid.[2]/High[3 Off[0]/Low[1]/Mid.[2]/High[3

ness Gain(RF) BG/DK/I Main 15 8 ness Gain(RF) M Main 15 8 ness Gain(RF ness Gain(RF) L ness Gain(VIDEO) PA ness Gain(VIDEO) NTSC3.58 Main 15 10 ness Gain(VIDEO) SECAM,B/W Main 15 8 ness Gain(VIDEO) NTSC4.43 Main 15 8 ness Gain(VIDEO) N-PA ness Gain(VIDEO) M-PA

ADJ. Items Mode PWB PWB PWB PANEL

Cool[0]/Normal[1]/Warm[2]/B&W[3])For Natural 3 1 Cool[0]/Normal[1]/Warm[2]/B&W[3])For Cinema 3 2

Off[0]/Low[1]/Mid.[2]/High[3 Off[0]/Low[1]/Mid.[2]/High[3

Off[0]/Low[1]/Mid.[2]/High[3 Off[0]/Low[1]/High[2 Off[0]/Low[1]/High[2 Off[0]/Low[1]/High[2

ness(HV Enhancer Gain for Y) HDMI(480i/576i ness(HV Enhancer Gain for Y) HDMI(480p/576 ness(HV Enhancer Gain for Y) HDMI(720 ness(HV Enhancer Gain for Y) HDMI(1080i-50/60 ness(HV Enhancer Gain for Y) HDMI(VGA

For Dynamic 3 2 For Natural 3 1 For Cinema 3 0 For Dynamic 2 0 For Natural 2 0 For Cinema 2 0 For Dynamic 3 2 For Natural 3 1 For Cinema 3 0

HDMI-YCbCr(50Hz:576i/576 HDMI-YCbCr(60Hz:480i/480 HDMI-YPbPr(1080i-50/60/720 HDMI-YCbCr(50Hz:576i/576 HDMI-YCbCr(60Hz:480i/480 HDMI-YPbPr(1080i-50/60/720

Main 15 8 Main 15 8 Main 15 10

Main 15 8 Main 15 8

DTT DTT DTT DTT

DTT

DTT DTT DTT

DTT DTT DTT DTT

DTT DTT

31 10 31 10 31 6 31

31 10 127 65 127 65 127 65 254 126 254 126 254 126

15218 Horizontal HPF Peak Frequency 720p-50 5

254 127 254

31

254

15 15

15

7

15

3

77 15 15

3

77 15 5

∆ : should be followed previous data

6

128

70

121

14

137

15

4

15

3

15

5 2

Changed Component

Factory Reset

After all of the adjustments of main chassis are finished, perform FACTORY RESET.

Press the SUB-POWER( ) button, INPUT SELECT( ) button and button at the same time, and hold for

more than 5 seconds.

The unit is set to factory settings.

21

Item Power Unit Vs, Va Adjustment

Applicable Model All models

Preparation Procedure

(1) Turn on the set and perform

pre-heat run more than 1 min on burn-in screen.

(2)

Receive full back pattern signal (or Video silence signal; but it will be automatically turned off after a few seconds by power save function.)

(3) Connect voltmeter leads to Vs

(or Va) and GND test points of the power unit.

42PD7500/42PD7500A (PW2)

(1) Turn Vs ADJ to adjust Vs voltage

to be within ±0.1V of the value specified in the label on the panel. Adjust within ± 1V at Vs1 Adjust within ± 0.1V at Vs2

(2)

Turn Va ADJ to adjust Va voltage to be within ±0.2V of the value specified in the label on the panel. Adjust within ± 1V at Va1 Adjust within ± 0.2V at Va2

Reconfirm that Vs voltage remains within

(3)

±0.1V of the specified value. Readjust if it’s outside of the margin.

Label example

<LOT>N6 Vs= 80.0V Va=60.0V Vw=140.0V Vx=60.0V

Y-sus

Power

Supply

Unit

Label

X-sus

Panel Module

(Rear View)

niP tseT aV / sV 99NC sV aV

DNG

RV tnemtsujda esraoc sV:1sV

RV tnemtsujda enif sV:2sV

RV tnemtsujda enif aV:2aV

RV tnemtsujda esraoc aV:1aV

5L147FPM ataruM

******** N/S

MADE IN THAILAND

VR154 : Do not touch because VR154 is not necessary to adjust it.

22

42PD7500/42PD7500A (PW2)

Item

RGB Amplitude Adjustment (PC D-Sub input)

Applicable Model All models

Preparation Procedure

(1) (1)

Input RGB amplitude adjustment signal of VGA (60Hz) into RGB2 [D-sub] terminal.

Black pattern: Set pedestal level. Characters must not be inserted into this signal.

Receive PC signal (VGA [60Hz]), and indicate Service Adjustment Menu.(Main)

(2)

Select No.652 of Service Adjustment Menu. Press [OK] key more than 2 seconds to start the automatic adjustment. The adjustment completes when the OSD reappears.

White

Black

0.7V

[Note] Never adjust without use of the specified signal.

If that were done by mistake, the picture would become abnormal in black level, contrast and color. In this case, it will be recovered by re-adjustment in the specified way.

Item

RGB Amplitude Adjustment (Main/Sub)

Applicable Model All models

Preparation Procedure

(1) Input 576p or 480p adjustment signal

into AV3 terminal.

Black pattern: Set pedestal level. Characters must not be inserted into this signal.

White

Black

0.7V

(1) Receive 576p or 480p adjustment signal on AV3

terminal input. Indicate Service Adjustment Menu.

(2)

Select No.652 (RGB amplitude gain adjustment Main) of Service Adjustment Menu. Press [OK] key more than 2 seconds to start the automatic adjustment. The adjustment completes when the indication [Auto Mode] at the bottom of the screen disappears.

Select No.653 (RGB amplitude gain adjustment

(3)

Sub) of Service Adjustment Menu. Press [OK] key more than 2 seconds to start the automatic adjustment. The adjustment completes when the indication [Auto Mode] at the bottom of the screen disappears.

[Note] Never adjust without use of the specified signal.

If that were done by mistake, the picture would become abnormal in black level, contrast and color. In this case, it will be recovered by re-adjustment in the specified way.

23