Before servicing this chassis, it is important that the service technician read the “Safety
Precautions” and “Product Safety Notices” in this service manual.
ATTENTION:
Avant d’effectuer l’entretien du châassis, le technicien doit lire les «Précautions de sécurité»
et les «Notices de sécurité du produit» présentés dans le présent manuel.
VORSICHT:
Vor Öffnen des Gehäuses hat der Service-Ingenieur die „Sicherheitshinweise“ und „Hinweise
zur Produktsicherheit“ in diesem Wartungshandbuch zu lesen.
Data contained within this Service
manual is subject to alteration for
improvement.
Les données fournies dans le présent
manuel d’entretien peuvent faire l’objet
de modifications en vue de perfectionner
le produit.
Die in diesem Wartungshandbuch
enthaltenen Spezifikationen können sich
zwecks Verbesserungen ändern.
SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT
Plasma Television
March 2005
42PD7200 (PW2)
CAUTION FOR SAFETY
Please read this page before repair the monitor.
This page explains to following items for keep the safety of set and prevent to accident during
repair work.
We explain by symbol at happen the damage or injury when took wrong repair.
Warning
Caution
We made the symbol as below, which are kind of following items.
This symbol means "CAUTION"
This symbol means "POSSIBLE to
ELECTRIC SHOCK"
This symbol means "possible to die or heavy damage"
This symbol means "possible to damage or something will break"
This symbol means "MUST"
This symbol means "DO NOT"
WARNING
Should be follows to instructions.
We indicates to cabinet, chassis and parts
by label, which are special attention part.
Please follow to note and [Safety Instructions]
of User’s Manual.
Prevent the electric shock.
Please take care during working because
monitor has high voltage part and power
supply part.
Possible to die if you tough to these place
by miss take.
Please disconnect power plug during
overhaul, reassemble or change parts.
You will die or take damage by electric
shock if you touch to live part.
Use recommended components.
Please use to same characteristic compo-
nent, which is same as previous for your
safety and keep reliability especially marked
in parts list and circuit diagram.
by
It is reason of electric shock or fire if you
use non-recommended component.
Should be kept same style of wiring or component.
Monitor uses tubes or tapes, which made
by insulator, and some components are
keep distance from surface of PWB for
safety.
Internal leads kept from hot part or high voltage
part by clamper or styling, so please return to
original condition for prevent to electric shock
or fire.
Should be done safety check after finished.
Every part (removed screws, component
and wiring) should be returned to previous
condition.
Check around repair position for make
damage by miss take and measure the
insulated impedance by meg-ohm meter.
Confirm the value of impedance, that
value is more than 4M ohm.
It is reason for electric shock or fire if that
value is less than 4M ohm.
Nobody can check and repair to the code
and combination circuit of HDCP.
Never remove the shield case, which is
assembled to the code and combination
circuit of HDCP.
1
42PD7200 (PW2)
PRECAUTIONS
How to clean the plasma screen panel of the monitor
Before cleaning the monitor, turn off the monitor and disconnect the power plug from the power outlet.
To prevent scratching or damaging the plasma screen face, do not knock or rub the surface with sharp or hard
objects. Clean the screen with a soft cloth moistened with warm water and dry with a soft cloth. If it is not
enough, then use a cloth with mild detergent. Do not use harsh or abrasive cleaners.
How to clean the cabinet of the monitor
Use a soft cloth to clean the cabinet and control panel of the monitor. When excessively soiled dilute a neutral
detergent in water, wet and wring out the soft cloth and afterward wipe with a dry soft cloth.
Never use acid/alkaline detergent, alcoholic detergent, abrasive cleaner, powder soap, OA cleaner, car wax,
glass cleaner, etc. especially because they would cause discoloration, scratches or cracks.
The 42-inch color plasma display panel, with a resolution of 1024 (H) x 1024 (V) pixels, creates a high-definition,
large-screen(aspect ratio : 16:9) and low-profile flat display. Free from electromagnetic interferences from geomagnetic sources and ambient power lines, the panel produces high-quality display images free from color misconvergence and display distortion.
High Performance Digital Processor
A wide range of input signals can be handed,including composite, component,and HDMI.High Definition Digital Processor creates the fine-textured image with dynamic contrast. In addition, it corresponds to a broad array of personal computer signals, from 640 x 400 and 640 x 480 VGA to 1600 x 1200 UXGA.(Analog Input)
Easy-to-use remote control and on screen display system
The remote control included eases the work of setting display controls. Further, the on-screen display system,
displays the status of signal reception and display control settings in an easy-to-view fashion.
Power saving system
When connected to a VESA DPMS-compliant PC, the monitor cuts its power consumption while it is idle.
Connecting to an Audio Visual Device
1
• Three SCART terminals, a composite/S Terminal*
added. A composite video output terminal is also provided as a monitoring output.
*1
A composite/S terminal = A side input
• A wide range of devices other than personal computers can also be connected.
• A RGB input is possible to switch to component signal from the Menu screen.
Power Swivel Feature
It allows to turn the plasma display left or right within ± 30 degree using the remote control.
, a component terminal*2, a HDMI terminal and have been
2
2. Specifications
42PD7200 (PW2)
Display
Panel
Net dimensions
(excluding Speakers/Stand)
Net weight
(excluding Speakers/Stand)
Ambient
conditions
Power supply
Power consumption/at standby
Audio output
(RGB input)
Input terminals
Input signals
Sync signals
(Video input)
Input terminals
Input signals
Output Signal
(RF input)
Input terminals
dimensions
Resolution
Temperature
Relative humidity
Approx. 42 inches (922 (H) x 522 (V) mm,
1024(H) x 1024 (V) pixels
1050 (W) x 676 (H) x 110 (D) mm
37.0kg
Operating : 5˚C to 35˚C, Storage : 0˚C to 40˚C
Operating : 20% to 80%, Storage : 20% to 90% (non-condensing)
AC100 - 240V, 50/60Hz
380W / <3W
speaker 12W + 12W (6Ω)
RGB1 DVI input terminal (DVI-D)
RGB1 audio input terminal (3.5mm Stereo Mini Jack)
RGB2 analog RGB input terminal (D-sub 15-pin)
RGB2 audio input terminal (3.5mm Stereo Mini Jack)
This product uses lead free solder (unleaded) to help preserve the environment. Please read these instructions
before attempting any soldering work.
Caution: Always wear safety glasses to prevent fumes or molten solder from getting into the eyes. Lead free
solder can splatter at high temperatures (600˚C).
Lead free solder indicator
Printed circuit boards using lead free solder are engraved with an "F."
Properties of lead free solder
The melting point of lead free solder is 40-50˚C higher than leaded solder.
Servicing solder
Solder with an alloy composition of Sn-3.0Ag-0.5Cu or Sn-0.7Cu is recommended.
Although servicing with leaded solder is possible, there are a few precautions that have to be taken. (Not taking
these precautions may cause the solder to not harden properly, and lead to consequent malfunctions.)
Precautions when using leaded solder
Remove all lead free solder from soldered joints when replacing components.
If leaded solder should be added to existing lead free joints, mix in the leaded solder thoroughly after the lead
free solder has been completely melted (do not apply the soldering iron without solder).
Servicing soldering iron
A soldering iron with a temperature setting capability (temperature control function) is recommended.
The melting point of lead free solder is higher than leaded solder. Use a soldering iron that maintains a high
stable temperature (large heat capacity), and that allows temperature adjustment according to the part being
serviced, to avoid poor servicing performance.
Recommended soldering iron:
Soldering iron with temperature control function (temperature range: 320-450˚C)
AUDIO PWB, JOINT PWB, Swievel PWB, HDMI PWB, control PWB
VIDEO PWB
TUNER PWB
Readjustment Power supply voltage
When a PANEL or a Power Unit is exchanged, power supply voltage needs to be adjusted. Please adjust to
make the values of Va and Vs of as should on the label currently stuck on the panel back upper parts.Adjustment is performed by VR in the power supply unit. Please refer to the procedures of “Va” and “Vs” adjustments
on 23page.
4
4. Component names
[Main unit]
Control panel
• Adjustment buttons are located
on the bottom.
• The back cover is provided
with indications to distinguish
the adjustment buttons.
+
-
VOLUME
UP/DOWN
buttons
(ADJUST
buttons)
SUB-POWER button
• ( ) indicates the function while the MENU is displayed on the screen.
SELECT button
SELECT button
42PD7200 (PW2)
MENU button
INPUT SELECT button
(OK button)
Remote-control
receiver
Indicating lamp
• The main power switch is located at the back, on the
lower surface.
Main power switch
[Remote control]
POWER button
INPUT SELECT buttons
MENU button
OK button
SOUND MODE button
VOLUME UP/DOWN button
PROGRAM SELECT buttons
(TV)
MULTI MODE button
T/TEXT button
(TV)
RECALL button
FUNCTION SELECT button
DVD CONTROL buttons
FREEZE/RETURN button
SELECT/ADJUST button
PICTURE MODE button
CH I/CH II button (TV)
CHANNEL UP/DOWN button (TV)
MUTE button
MULTI PICTURE button
SWIVEL button
CLE-960
5
42PD7200 (PW2)
5. New adoption technology
[System control micom I001(M30627)]
Pin function table
No.PIN MANEI/O
1
2
3
4
5
6
7
8DATA_OUT(FC)
9DATA_IN(FC)
10CLK(FC)
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
VREF (+5.0V)I
+5.0VI
NCI/O
OSD_DATAI/O
OSD_CLKI/O
HP_VOL
FE.AGC_O(M)I/O
EDID_PROTECTI/O
TRAP_MAINI/O
GNDI
CNVSS(FLASH)I
DSUB COMPI/O
RGBSWI/O
RESETI
16MHz oscillationO
GNDI
16MHz oscillationI
+5.0VI
NMI(+5.0V)I
RMCON(AVC)I/O
V.FREQ_2(VIDEO)I/O
V.FREQ_1/3I/O
SCV.SYNCI/O
IRQ䋨PM-IRQ)I/O
MCV.SYNCI/O
POWER_LEDI/O
H.FREQ_2(VIDEO)I/O
PDP_WVGA_LCD_SW_2I/O
H.FREQ_1/_3I/O
PDWN
RXD2I/O
TXD2I/O
TXD1(RS232C/FLASH)I/O
RXD1(RS232C/FLASH)I/O
SCLK(FLASH)I/O
BUSY(FLASH)I/O
TXD0(PDP)I/O
RXD0(PDP)I/O
SDA4(panel)I/O
SCL4(panel)I/O
M_ENABLEI/O
M_SCLKI/O
M_SDAI/O
M_WAKEUPI/O
PDPGO(PM_ON)I/O
5V
5V
NC
OSD DATA
OSD CLK
Head Phone Volume
I/O
AGC Voltage(F/E)
FC DATA
I/O
FC DATA
I/O
FC CLOCK
I/O
Memory Protect
TRAP-MAIN
GND
CNVSS(FLASH)
SYNC-SW
SYNC-SW
RESET
OSC-OUT
GND
OSC-IN
5V
5V PULL UP
IR Signal
TA1370(LA7213), COMPONENT2
TA1370(LA7213), COMPONENT(Main)/ DSUB COMPONENT
CVBS for SYNC Detection(Sub Picture)
PANEL MODULE Condition(L:Normal,H:Erroe)
CVBS for SYNC Detection(Main Picture)
L䋺LED ON(Power Save)
SWIVEL(R-output)
Discriminate terminal of bridge media circuit connecting.
Initializing EEPROM
RESET(DVI)
DVI Contorol
DVI Contorol
DVI Contorol
DVI Contorol
Detecting Powre-SWIVEL
SP ON/OFF Relay Control
MUTE
I2C(NJW1163,AD7414,TA1370)
I2C(NJW1163,AD7414,TA1370)
SYNC-SW
BM switch
RESET for LIPSYNC IC
PDP/42WVGA/LCD detection
GND
AFC Voltage(Main TUNER)
AFC Voltage(Sub TUNER)
HEAD PHONE DETECT
HDMI 5V DET
INT(HDMI)
Component SW Main 㹤 DSUB
deemphasis control output for HDMI
7
42PD7200 (PW2)
No.PIN MANEI/OFUNCTION
101
102
103
104
105
106
107
108
109
110
111
CONTROLI/O
SCL0I/O
SDA0I/O
SCL3(EEPROM)I/O
SDA3(EEPROM)I/O
HDMI_CIR_DETI/O
EXT_RESETI/O
OSD_CSI/O
FC_ENABLEI/O
NCI/O
NCI/O
112IRQ_DTT
113DTT_POWER
114DISPEN
115
116
117
HDMI_A_SWI/O
SCL5I/O
SDA5I/O
118FUNC_1
119FUNC_2
120NC
121
122
123
124
125
126
127
128
AD_KEY3I/O
AD_KEY2I/O
AD_KEY1I/O
TV.POWERI/O
DIP.DETI/O
POWER_SAVEI/O
GNDI
FAN_ALARM *1I/O
LCD PANEL
2
C-BUS Contorol CLOCK
I
2
I
C-BUS Contorol DATA
I2C-BUS Contorol CLOCK
I2C-BUS Contorol DATA
Detecting HDMI circuit connection
EXTERNAL RESET
OSD CS
FC ENABLE
NC
NC
DTT IRQ
I/O
DTT POWER
I/O
DISPEN
I/O
HDMI AUDIO SW
2
I
C-BUS Contorol CLOCK
2
I
C-BUS Contorol DATA
I/O
Function 1
I/O
Function 2
I/O NC
AD KEY3**
AD KEY2*
AD KEY1(INPUT)
POWRE ON/OFF(H:ON䇮L:STANDBY)
DIP DET
POWRE ON/OFF(L䋺ON(STANDBY䍃POWRE SAVE), H䋺OFF)
GND
FAN ALARM
8
Block diagram
42PD7200 (PW2)
9
42PD7200 (PW2)
6. Adjustment
● How to get to Adjustment mode
Using the front control buttons with the set turned off (standby) can activate it.
Press the SUB-POWER( ) button, INPUT SELECT() button and button at the same time, and hold for
more than 5 seconds.
The set turns on in adjustment mode with OSD.
● Changing data and Selecting Adjustment code
When the set is in adjustment mode, the cursor , , , and OK buttons of the remote control or front panel
may be used as the adjustment keys.
, buttons are used for selecting adjustment code.
, buttons are used for changing data values.
OK button is used for confirming the data.
After finishing the necessary adjustment press MENU button. Adjustment mode is released and the set returns to
normal condition.
● Memory Initialize operation
NOTE: The execution of this function returns the adjustment codes to the preset values, therefore, adjustment
data will be lost.
Procedure
(1) Enter Adjustment Mode.
(2) Select MEMORY INIT adjustment code (No.658) and change the data value from 0 to 1.
(3) Activate MEMORY INIT by pressing OK button for more than 3 seconds.
(4) Select No.525 and change data value from 1 to 0.
(5) Check that the receiving channel goes to P1. Unit is set to preset values.
10
42PD7200 (PW2)
_
)
_
)
e
_
)
e
_
)
e
_
)
e
_
)
e
_
)
r
r
)
)
)
)
p
)
p
)
p
)
e
play
l
play
l
(
)
e
(
)
e
(
)
g
e
g
)
g
)
y
o
(
t
(
)
(
)
(
)
(
)
p
p
p
)
p
p
p
p
p
p
A
p
p
p
e
p
e
)
p
e
p
e
p
p
e
p
p
A
p
p
p
e
p
e
p
p
e
p
[
]
e
[
]
[
]
)
[
]
[
]
[
]
[
]
[
]
[
]
)
[
]
[
]
p
[
]
p
(
)[
]
/
p
(
)[
]
p
[
]
/
p
[
]
p
g
]
/
p
g
]
p
(
]
/
p
(
]
p
q
]
/
p
q
]
p
[
]
[
]
p
[
]
/
p
[
]
p
g
]
/
p
g
]
p
p
]
p
]
p
p
t
p
p
t
p
p
t
0
p
t
0
p
t
p
p
t
p
p
]
A
p
]
A
p
]
0
p
]
0
p
]
p
p
]
p
p
)
Service adjustment items by I
ADJFunctionMax. Default
NovalueFORMATTER VIDEOTUNERPDP
CONTRAST(RF
0SUB
1SUB
CONTRAST(AV1
2SUB
CONTRAST(AV2
3SUB
CONTRAST(AV3
CONTRAST(AV4
4SUB
5SUB
CONTRAST(AV5
6SUB
CONTRAST(RF
7 Sub Colo
8 Sub Colo
9 TINT㧔 RF
10 TINT㧔VIDEO
11 TINT㧔RF
12 TINT㧔VIDEO
13 Free
14 Free
15 Free
16 Free
17 Reference Am
18 Reference Am
19 Reference Am
20 Dis
21 Dis
22 Offset Value
23 Offset Value
24 Offset Value
25 Ter
26 Ter
27 Set Blue Gamma
28 Contrast mode<D
29 Select for WIDE Mode11
30 PinP Function
31 Black Level
32 Black Level
33 Black Level
34 Black Level
35 YNR In
36 YNR In
37 YNR In
38 YNR In
39 YNR In
40 YNR In
41 YNR In
42 YNR In
43 CNR In
44 CNR In
45 CNR In
46 CNR In
47 CNR In
48 CNR In
49 CNR In
50 CNR In
51 CNR In
52 CNR In
53 main/sub YFRNR level
54 main/sub YFRNR level
55 main/sub YFRNR level
56 main/sub YFRNR level
57 main/sub YFRNR level
58 main/sub YFRNR level
59 main/sub CFRNR level
60 main/sub CFRNR level
61 main/sub CFRNR level
62 main/sub CFRNR level
63 main/sub CFRNR level
64 main/sub CFRNR level
65 B-Y/BޔR-Y/R
66 B-Y/BޔR-Y/R
67 DSB Gain of Vertical for B-Y/BޔR-Y/R
68 DSB Gain of Vertical for B-Y/BޔR-Y/R
69 DSB corin
70 DSB corin
71 B-Y/BޔR-Y/R
72 B-Y/BޔR-Y/R
73 Horizontal HPF Peek Fre
74 Horizontal HPF Peek Fre
75 Horizontal Enhancer Gain for B-Y/B,R-Y/R
76 Horizontal Enhancer Gain for B-Y/B,R-Y/R
77 Horizontal DSB Gain for B-Y/B,R-Y/R
78 Horizontal DSB Gain for B-Y/B,R-Y/R
79 Horizontal DSB Corin
80 Horizontal DSB Corin
81 Horizontal Enhancer Cli
82 Horizontal Enhancer Cli
83 B-Y Clam
84 R-Y Clam
85 B-Y Clam
86 R-Y Clam
87 B-Y Clam
88 R-Y Clam
89 B-Y Clam
90 R-Y Clam
91 B-Y Clam
92 R-Y Clam
93 B-Y Clam
94 R-Y Clam
95 P/N IDMain10
96 P/N IDSub10
97 Shar
98 Free
99 Free
litude(RGB_AMP
litude(RGB_AMP
litude(RGB_AMP
for Max. Amplitude Leve
for Max. Amplitude Leve
+/-) of Upper Limit (for FC :RGB-AMP
+/-) of Upper Limit (for TB1274:SUB-CONT
+/-) of Upper Limit (for TB1274:Sub Color
et value of White peak Adj.Single Picture mod
et value of Color Level Adj.(for TB1274:Sub Color
ness Gain(RF/NR
ain On/Off 0:Off, 1:On(For 55V
namic> SW (TV) 0:Dynamic, 1:Dynamic+Aut
for PC) 0:PinP, 1:Infomation1, 2:Infomaiton Spli
RGB_AMP
RGB_AMP
RGB_AMP
RGB_AMP
ut Level for AV1-5 ModeRF77
ut Level for AV1-5 ModeVIDEO77
ut Level for AV1-5 ModeScart-RGB(50/60Hz
ut Level for AV1-5 Mode480i/576i77
ut Level for AV1-5 Mode480p/576
ut Level for AV1-5 Mode1080i-50/60/720
ut Level for DVI-STV Mode480i/480p/576i/576p/VG
ut Level for DVI-STV Mode1080i-50/60/720
ut Level at Low level for AV1-5 Mod
ut Level at Low level for AV1-5 Mod
ut Level at Low level for AV1-5 Mod
ut Level at Low level for AV1-5 Mod
ut Level at Low level for AV1-5 Mod
ut Level at Low level for DVI-STV Mode480i/480p/576i/576p/VG
ut Level at Low level for DVI-STV Mode1080i-50/60/720
ut Level at Low level for Dsub Comp. Mod
ut Level at Low level for Dsub Comp. Mod
ut Level at Low level for Dsub Comp. Mod
VER. Enhancer Gain
VER. Enhancer Gain
of Vertical for B-Y/BޔR-Y/R[CVDSBC0
of Vertical for B-Y/BޔR-Y/R[CVDSBC1
. SW for B-Y/B,R-Y/R[CHHPF0
. SW for B-Y/B,R-Y/R[CHHPF1
for B-Y/B,R-Y/R[CHDSBC0
for B-Y/B,R-Y/R[CHDSBC1
for B-Y/B,R-Y/G 0:CTI[CHECLP0
for B-Y/B,R-Y/G 0:CTI[CHECLP1
CVEG0
CVEG1
CVDSBG0
CVDSBG1
CHEG0
CHEG1
CHDSBG0
CHDSBG1
2
C-bus control (MAIN Part)
Main158
Main/Sub Composite mod
Main/Sub Composite mod
Main/Sub Composite mod
Main/Sub Composite mod
Main/Sub Composite mod
Sub158
Main158
Sub158
Main6333
Main6333
Sub6333
Sub6333
RF/VIDEO254127
PC254127
Multi Picture mod
Main-Sub-Multi Picture mod
Single Picture mod
For 55V11
RF11
RF/VIDEO254127
PC254127
HDMI254127
For USA NTSC/480i254127
131 Shar
132 Free
133 Y Out Level M
134 Y Out Level B/G
135 Y Out Level D/K
136 Y Out Level I
137 Y Out Level L
138 Y Out Level L'
139 Y Out Level
140 Y Out Level
141 Free
142 Y Out Level M
143 Y Out Level B/G
144 Y Out Level D/K
145 Y Out Level I
146 Y Out Level L
147 Y Out Level L'
148 Y Out Level
149 Y Out Level
150 Free
151 C Out Level M
152 C Out Level B/G
153 C Out Level D/K
154 C Out Level I
155 C Out Level L
156 C Out Level L'
157 C Out Level
158 C Out Level
159 Free
160 C Out Level M
161 C Out Level B/G
162 C Out Level D/K
163 C Out Level I
164 C Out Level L
165 C Out Level L'
166 C Out Level
167 C Out Level
168 Free
169 BPF
170 BPF
TRAP_SW(COMB=OFF-PAL/NTSC4.43/NTSC3.58
171 C
172 LPFMain/Sub10
173 SECAM D-Tra
174 FILTER SW
175 Y
176 Y
177 Y
178 Y
179 Y
180 Y
181 Y
182 Y
183 Y
184 Y
185 Y
186 Y
187 Y
188 Y
189 Y
190 Y
191 Y
192 Y
193 Y
194 Y
195 Y
196 Y
197 Y
198 Y
199 NTSC Comb
224 S
225 BELL/HPF㧙33
226 HS PhaseMain10
227 HS PhaseSub10
228 Bandwidth 1NTSC/PAL/480i/576i32
229 Bandwidth 1480
230 Bandwidth 11080i-50/60/720
231 Bandwidth 2NTSC/PAL/480i/576i32
232 Bandwidth 2480
233 Bandwidth 21080i-50/60/720
234 Sub Contrast 1Exce
235 Sub Contrast 1HDMI150
236 Sub Contrast 2Exce
237 Sub Contrast 2HDMI150
238 Sub Color 1Exce
239 Sub Color 1HDMI150
240 Sub Color 2Exce
241 Sub Color 2HDMI150
242 HV THRU 1NTSC/PAL/480i/576i/480
243 HV THRU 11080i-50/60/720
244 HV THRU 2NTSC/PAL/480i/576i/480
245 HV THRU 21080i-50/60/720
246 H
SEP 1RF/VIDEO10
SEP 1480i/576i10
247 H
248 H
SEP 1480p/576
SEP 11080i_5
249 H
250 H
SEP 11080i_60/720
251 H
SEP 2RF/VIDEO10
SEP 2480i/576i10
252 H
SEP 2480p/576
253 H
254 H
SEP 21080i_5
SEP 21080i_60/720
255 H
256 V
SEP 1RF/VIDEO10
SEP 1480i/576i10
257 V
258 V
SEP 1480p/576
SEP 11080i_5
259 V
SEP 11080i_60/720
260 V
261 V
SEP 2RF/VIDEO10
SEP 2480i/576i10
262 V
SEP 2480p/576
263 V
264 V
SEP 21080i_5
SEP 21080i_60/720
265 V
FC MODE 1RF30
266
267
FC MODE 1VIDEO30
FC MODE 2RF30
268
FC MODE 2VIDEO30
269
270 N
LVL 1RF10
LVL 1VIDEO10
271 N
LVL 2RF10
272 N
273 N
LVL 2VIDEO10
274 Free
275 HD POSITION 1480i/576i150
276 HD POSITION 1480
277 HD POSITION 11080i
278 HD POSITION 11080i
279 Free
280 HD POSITION 2480i/576i150
281 HD POSITION 2480
282 HD POSITION 21080i
283 HD POSITION 21080i
284 Y LPF 1RF11
285 Y LPF 1VIDEO11
286 Y LPF 2RF11
287 Y LPF 2VIDEO11
288 Gain 111
289 Gain 211
290 YCS MODENTSC3.5830
291 3D DET77
FC GainNTSC3.5830
292
293 2D-CNR
294 2D-CNR Li
295 GMCON10
296 Y-NC10
297 Y-NC Li
298 2D-YNR
299 2D-YNR Gai
ADJ. ItemsModePWBPWBPWBPANEL
㧙
㧙
㧙
㧙
㧙30
㧙30
/576
/576
t HDMI150
t HDMI150
t HDMI150
t HDMI150
/576
/576
/576
60/720
/576
60/720
10
30
30
30
30
30
32
30
32
30
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
150
150
150
150
150
150
30
30
30
30
30
should be followed previous data
Changed Component
13
42PD7200 (PW2)
m
p
p
p
o
p
A
X
S
t
p
S
p
S
p
S
p
S
p
y
y
y
p
V
p
p
A
A
A
A
A
A
A
A
A
A
A
A
_
p
p
p
S
S
S
S
p
A
p
p
y
y
y
p
p
V
p
p
p
p
A
A
A
A
A
A
: shoule be adjusted
ADJFunctionMax. Default
NovalueFORMATTER VIDEOTUNERPDP
300 2D-YNR Li
301 BLK EXP30
302 CKILL10
ut Clam
303 Out
ut Clamp aut
304 In
305 Int Clam
306 C-ENH
307 YC-MI
308 Video2 RGB Mode ON
309 HSWINV10
310 Free
311 V-ENHA GainNTSC3.5832
312 V-ENHA NLNTSC3.5832
313 H-ENHA GainNTSC3.5831
314 3DNR Corr for 3DYC
315 Burst ON for 2DYCS????10
316 MDMPL
317 MDMBLޓ10
318 H-MaskOu
319 V-MaskOut
320 In
321 In
322 Out
323 Out
324 V-ENHA CoreNTSC3.5830
325 In
326 Burst Gate Ke
327 S
328 H-WSTNTSC3.5873
329 HD Am
330 HD Gain
331 HD Am
332 HD Gain 1NTSC3.58318
333 HD Am
334 HD Gain 2NTSC3.58314
335
336
337
338
339
340
341
342
343
344
345
346
347 BCMSLPNTSC3.5833
348 BCSSLPNTSC3.5833
349 BYMSLPNTSC3.5833
350 BYSSLPNTSC3.5832
351 BCMESETNTSC3.5832
352 BCMFSETNTSC3.5832
353 BCSESETNTSC3.5832
354 BCSFSETNTSC3.5832
355 BYMESETNTSC3.5833
356 BYMFSETNTSC3.5833
357 BYSESETNTSC3.5833
358 BYSFSETNTSC3.5833
359 BCMUPNTSC3.5811
360 CECMPNTSC3.5874
361 CSCMPNTSC3.58150
362 F1HE
363 F1VERNTSC3.5831
364 MREFNTSC3.58152
365 CDEYENTSC3.5832
366 YDEYENTSC3.5832
367 MDSNTSC3.5810
368 F-TBC OFF MDMPLNTSC3.5810
369 REC:C
370 V-ENHA GainExce
371 V-ENHA NLExce
372 H-ENHA GainExce
373 3D-CNR Lim for 2DYC
374 3D-CNR k for 2DYCS30
375 3D-CNR Gain for 2DYC
376 3D-YNR Lim for 2DYC
377 3D-YNR k for 2DYCS30
378 3D-YNR Gain for 2DYC
379 YCS MODEExce
380
381 Free
382 Free
383 V-ENHA CoreExce
384 In
385 Burst Gate Ke
386 S
387 H-WSTExce
388 HD Am
389 HD Gain
390 HD Am
391 HD Gain 1Exce
392 HD Am
393 HD Gain 2Exce
394
395
396
397
398
399
Manual10
ut Y-Delay(Main RF mode) for 3DYC
ut Y-Delay(Main Video mode) for 3DYC
ut-Y-Delay(Main RF Mode) for 3DYC
ut-Y-Delay(Main Video Mode) for 3DYC
431 SEPA
432 HD-PHASE
433 HD-PHASE
434 HD-PHASE
435 HD-PHASE
436 Heat APC function
437
438
439 Select for APC function10
440 CCFMD functionRF/VIDEO10
441 CCFMD functionDVI-PC/DVI-STB/DSUB-RGB10
442 NTSC/EBU
443 NTSC/EBU
444 NTSC/EBU
445 Correction for Trackin
446 Correction for Trackin
447 Correction for Trackin
448 Color Tem
449 Bri
450 D
451 D
452 Histo
453 Histo
454 Histo
455 D
456 FC6 THROUGH 0:OFF, 1:THROUGH ON10
457
458
459 HD/VD OUTPUT LEVEL11
460 ISM Control for WVGAFor WVGA11
461 Free
462 WVGAޓBRIGHTNESSFor WVGA10
463 Black insert function 0:Not available, 1:Availabl
464 D
465 DVI-STB Setu
466 HSYNC De-Jitter 0:Low
467 HSYNC De-Jitter 0:Low
468 Free
469
470
471
472
473 PRE_AM
474 VOL
475 VOL
476 PRE
477 PRE
478 PRE
479 PRE
480 PRE_FM
481 PRE
482 PRE_FM
483 PRE
484 PRE
485 CM
486 CM
487
488 TEXT H s
489 TEXT V s
490 TEXT
491 TEXT
492 Select for APC out
493 L
494 Free
495 HDMI EDID WRITE ENABLE0:Disenable, 1:Enabl
496 BPMA : Back Porch Mode,Field211
t NTSC3.5833
t NTSC3.5833
t NTSC3.5833
t NTSC3.5832
t NTSC3.5832
t NTSC3.5832
t NTSC3.5832
t NTSC3.5832
t NTSC3.5833
t NTSC3.5833
t NTSC3.5833
t NTSC3.5833
t NTSC3.5811
t NTSC3.5874
t NTSC3.58150
t NTSC3.5831
t NTSC3.5831
t NTSC3.58152
t NTSC3.5832
t NTSC3.5832
t NTSC3.5810
t NTSC3.5810
497 VCORA : VCO range select30
498 CRNTA : chan
499 TESTA : Matchin
500 PRMB :
501 HDCP : HDCP enable criteri
502 SMPLINGFor CCD2550
503 POLLINGFor CCD25515
504 STARTFor CCD72
505 TIMEOUTFor CCD305
506 STATUSFor CCD72
507 CCD-HPFor CCD7940
508 CCD-CL
509 Horizontal Position of OS
510 Vertical Position of OSD157
511 Free
512 T
ical Value of Contrast OS
513 Free
erature for Fun start (Temp_High
514 Tem
515 Tem
erature for Fun stop(Temp_Low
516 Dis
517 Dis
ccumulation time for Panel (hours
518
519 Reset function of accumulation time for WVGA/LCD Panel0:Normal 1:Rese
520 Power Save/Screen Saver On/Off Setting at Initialize, Reset and Shipping
521 PC Power Save function
522 Screen Saver-Picture shift amount 0:1
523 Screen Saver-Picture shift Direction 0:dia /1:cross /2:u
524 Waite Time for POWER SAVE function
525 BURN-IN enable/ disenabl
526 BURN-IN mod
527 Recover
528 EURO DK-SECAM MASK
529 Set Sound S
Power condition at power save mode of PC mod
530
after done RESET function
Select Wide mode for Europe model
531
Normal= 5mode/ For Service= 10 mode
532 Thermo sensor function available or not 0:None, 1:Ye
533 Video In
534 EURO SOUND SYSTEM DK Disable 0:Enable 1:Disabl
535 Remote Function available 0:NO, 1:YE
536 Ke
Function available 0:NO, 1:YE
537 DVI-STB/RGB-COMPONENT Function available 0:NO, 1:YES10
538 Terminal Mode Function available 0:Not Available, 1:Availabl
539 Select color control
540 Lan
541 Hotel Mode
542
nalog Data (0:Keep EEPROM, 1:Not Keep to EEPROM
543 Maximum Volume Limi
544 Power Mode
545 Free
546 Channel Select
uto_sound 4.5 (0:Korea, 1:BTSC, 2:Japan
547
548 T/TEXT
549 Free
550 Channel Preset
551 V FREQ 60Hz Force
552 Offset value of ad
553 Use "TINT Offset↑" 0:No, 1:YesFor COMPAL factor
554 PDP-BLK ON/OFF1:ON, 0:OFF10
555 IIC BUS Data/Clock O
556 Protect for Ima
557 Protect for Ima
558 Protect for Ima
559 Dis
ersion Time of Sustain current 0:2 Times, 1:4 time
ersion Time of Sustain current 0:2 Times, 1:4 time
560 Dis
ersion Time of Sustain current 0:2 Times, 1:4 time
561 Dis
562 Dis
ersion Time of Sustain current 0:2 Times, 1:4 time
level of BMInde
577 Dis
578 TA1391: SYNC SW Chan
579 Free
580 Free
581 Countin
582 Countin
583 Countin
584 Lower Limits value for S
585 Lower Limits value for S
586 Lower Limits value for S
587 Lower Limits value for S
588 Lower Limits value for S
589 U
er Limits Value for Sync Detect of 2ms interva
er Limits Value for Sync Detect of 2ms interva
590 U
591 U
er Limits Value for Sync Detect of 2ms interva
Test to allow increment of stability counter.11
reamble criteri
of internal temperature
of Panel map versio
to an error of OSC frequency of Ceramic resonator for time
stem at Auto mode of Sound Sys.(0:auto, 1:4.5MHz
ut function available or not at RGB1 & RGB2 mod
0:Asia, 1:South America
Refer to below
0:No, 1:Yes
0:Last mode, 1:Pos1, 2-7:V1-6, 8-9:RGB1-2
0:CCIR, 1:CHINA
0:None, 1:Yes
0:VESTEL, 1:GIFU, 2:HAMA, 3:HFDM, 4:AUSTRALIA
0:None, 1:Yes
usted TINTFor COMPAL factor
e Retention 0:Off, 1:7%, 2:14%, 3:21%, 4:AUTODynamic mod
e Retention 0:Off, 1:7%, 2:14%, 3:21%, 4:AUTONatural mod
e Retention 0:Off, 1:7%, 2:14%, 3:21%, 4:AUTOCinema mod
of BM version127-
time for discrimination of fH(M30625/TA1370)
time for discrimination of fV(M30625/TA1370)
time for discrimination of fV(TB1274
ADJ. ItemsModePWBPWBPWBPANEL
current selec
Temperature
0:Impossible, 1:Possible
V=60) 0:Normal 1:Mask(V=60
0:Close, 1:Open
e
nc Detect of 2ms interva
nc Detect of 2ms interva
nc Detect of 2ms interva
nc Detect of 2ms interva
nc Detect of 2ms interva
ixel㧛1:2pixel㧛2:3pixel20
[MYNRP7]
[MYNRP8]
[MYNRP8']
/down /3:left/righ
For CCD7957
DYNAMIC3131
P.S/S.S
0:Off/20m
1:On/Off
2:Off/Off
VIDEO/PC25415
0:Disenable, 1:Enabl
Main10
0:Keep last condition,
1:Return to normal conditio
0:Normal, 1:For service10
0:Not Available, 1:Availabl
RS232C11
Main/Sub10
For Dynamic mod
For Natural mod
For Cinema mod
For PC mode11
For PC-Movie mod
For AFC at TV mode25425
For Free Running at TV mod
For AUTO OFF at TV mode25425
For Free Running at AV mod
For Power Save at AV mode2545
For AFC at TV mode25440
For Free Running at TV mod
For AUTO OFF at TV mode25435
namic] mod
Natural] mod
Cinema] mod
namic] mod
Natural] mod
Cinema] mod
70
316
3112
157
25458
25455
125255-
65535-
10
20
11
30
11
22
6234
10
10
10
11
10
11
11
60
20
10
6363
90
10
20
11
41
10
2011
10
10
44
44
44
10
11
11
11
21
21
21
21
21
21
70
70
71
70
-
314
10
312
312
312
25430
25430
25445
should be followed previous data
-
Changed Component
16
42PD7200 (PW2)
l
e
pp
l
(
(Hz)
(
)
(
)
(
)
(
(
g
t
g
t
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
(
)
y
(
)"
y
g
_
yp
yp
y
o
y)
j
)
j
r
A
g
e
A
)
A
)
A
e
(
)
j
: shoule be adjusted
ADJFunctionMax. Default
NovalueFORMATTER VIDEOTUNERPDP
592 Upper Limits Value for Sync Detect of 2ms interva
593 U
er Limits Value for Sync Detect of 2ms interva
594 V detection
595 H detection
596 V detection
597 H detection
598 COLOR SYSTEM CONTROL-MODE
599 COLOR SYSTEM CONTROL-MODE
600 Countin
601 Countin
602 TB1274 Read Data
603 TB1274 Read Data
604 TB1274 Read Data
605 TB1274 Read Data
606 MSP Read Data
607 MSP Read Data
608 MSP Read Data
609 MSP Read Data
610 MSP Read Data
611 MSP Read Data
612 TA1391FG Read Data
613 TA1391FG Read Data
614 TA1391FG Read Data
615 TA1391FG Read Data
616 TA1391FG Read Data
617 TA1391FG Read Data
618 TA1391FG Read Data
619 TA1391FG Read Data
620 TA1370G Read Data
621 TA1370G Read Data
622 SiI9993 Read Data SYNC1 : VSYNC/Clock detect/S
623 SiI9993 Read Data NHRDL1 : N hardware value 1-624 SiI9993 Read Data NHRDM1 : N hardware value 1-625 SiI9993 Read Data NHRDH1 : N hardware value 1-626 SiI9993 Read Data CHRDL1 : CTS hardware value 1-627 SiI9993 Read Data CHRDM1 : CTS hardware value 1-628 SiI9993 Read Data CHRDH1 : CTS hardware value 1-629 SiI9993 Read Data ACR1 : ACR PLL hardware value 1-630 SiI9993 Read Data ACRS1 : ACR PLL hardware value 1--
SiI9993 Read Data SFREQ1 : "Extracted Sampling Frequency 1
631
channel status b24-27
632 SiI9993 Read Data CLKFRQ1: Clock Accurac
633 SiI9993 Read Data ALNG1 : Audio len
634 SiI9993 Read Data MT
635 SiI9993 Read Data VTYP1 : AVI infoframe t
636 SiI9993 Read Data VVER1 : AVI infoframe version code 1-637 SiI9993 Read Data VINFO11: AVI infoframe data 1-638 SiI9993 Read Data VINFO21:-639 SiI9993 Read Data VINFO31:-640 SiI9993 Read Data VINFO41:-641 SiI9993 Read Data VINFO51:-642 SiI9993 Read Data ATYP1 : AUDIO InfoFrame T
643 SiI9993 Read Data AVER1 : AUDIO InfoFrame Version Code 1-644 SiI9993 Read Data AINFO11: AUDIO InfoFrame Data B
645 SiI9993 Read Data AINFO21:-646 SiI9993 Read Data AINFO31:-647 SiI9993 Read Data AINFO41:-648 SiI9993 Read Data AINFO51:-649 Initialize function for EEPROM of Video PWB board10
650 Check condition of EEPROM of Video PWB board
651 W/B Initialize1652 Gain ad
653 Gain ad
654
655
656
657
658 EEPROM Initialize
659 Enter to SUB ad
660 Enter to service menu of FC sub mi-con--
Format PWB㧕 0:out of range, 128:NO V(or out of spec),50/60
Format PWB㧕 0:out of range, 128:NO H(or out of spec),15/28/31/33/45(kHz
VideoPWB㧕 0:out of range, 128:NO V(or out of spec), 255:interrupt 50/60(Hz
Video PWB㧕 0:out of range, 128:NO H(or out of spec),15/28/31/33/45(kHz
ustment of RGB amplifie
utomatic White Peak Adj.Sin
utomatic Color Level Adj.(TB1274BF
utomatic Color Level Adj.(TB1274BF
utomatic White Peak Adj.Multi Picture mod
For Free Running at AV mod
For Power Save at AV mode254200
Main-Sub-Main-Main-Sub-Sub--
0:Normal, 1:Abnormal(Fail or n
assembl
Main--ǘ
Sub--
le Picture mod
Main PAL/NTSC(COMPOSITE-Sub PAL/NTSC(COMPOSITE--
25445
255255255255-
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
1-
--
-10
should be followed previous data
Changed Component
ǘ
17
42PD7200 (PW2)
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
[
]
g
)
/
p
g
)
)
g
)
p
g
)
p
g
)
g
)
g
)
g
)
)
g
)
g
t
A
g
t
A
g
t
A
g
t
A
g
t
A
g
t
(CM)
)
(CM)
)
(CM)
)
(CM)
)
(CM)
(CM)
p)
(CM)
p)
(CM)
)
(CM)
(CM)
(CM)
)
(CM)
)
(CM)
)
(CM)
)
(CM)
)
(CM)
(CM)
p)
(CM)
p)
(CM)
)
(CM)
p
)
p
)
p
)
)
p
)
p
)
p
p
)
p
p
)
p
)
)
p
)
)
p
)
p)
p
)
p)
p
)
)
p
)
)
(CM)
(CM)
A
(CM)
A
(CM)
A
(CM)
A
(CM)
A
(CM)
(CM)
p)
(CM)
p)
(CM)
(CM)
)
(CM)
e
g
e
[
]
(
)[
]
[
]
p
Service
adjustment items by I
2
C-bus control (SUB adjust menu)
(*The change to a sub menu. press “ok” key after no.659 with a main menu)
: shoule be adjusted
: should be followed previous data
ADJFunctionMax. Default
No.ValueFORMATTER VIDEO TUNER PDP
0 R DRIVE1
1 G DRIVE1
2 B DRIVE1
3 R DRIVE2
4 G DRIVE2
5 B DRIVE2
6 R DRIVE3
7 G DRIVE3
8 B DRIVE3
9 R DRIVE4
10 G DRIVE4
11 B DRIVE4
12 R DRIVE1
13 G DRIVE1
14 B DRIVE1
15 R DRIVE2
16 G DRIVE2
17 B DRIVE2
18 R DRIVE3
19 G DRIVE3
20 B DRIVE3
21 R DRIVE4
22 G DRIVE4
23 B DRIVE4
24 Bri
25 Bri
26 Bri
27 Bri
28 Bri
29 Bri
30 Bri
31 Bri
32 Bri
33 Bri
34 Bri
35 Bri
36 Bri
37 Bri
38 Bri
39 Color Center
40 Color Center
41 Color Center
42 Color Center
43 Color Center
44 Color Center
45 Color Center
46 Color Center
47 Color Center
48 Tint Center
49 Tint Center
50 Tint Center
51 Tint Center
52 Tint Center
53 Tint Center
54 Tint Center
55 Tint Center
56 Tint Center
57 Tint Center
58 Tint Center
59 Center of Shar
60 Center of Shar
61 Center of Shar
62 Center of Shar
63 Center of Shar
64 Center of Shar
65 Center of Shar
66 Center of Shar
67 Center of Shar
68 Center of Shar
69 Center of Shar
70 Center of Shar
71 Center of Shar
72 Contrast Center
73 Contrast Center
74 Contrast Center
75 Contrast Center
76 Contrast Center
77 Contrast Center
78 Contrast Center
79 Contrast Center
80 Contrast Center
81 Contrast Center
82 Contrast Center
83 Contrast Center
84 Maximum Value of Contrast at REAL/NORMAL mod
85 Offset Value of Contrast data at SPLIT mode12053
86 Offset value of
87 Horizontal Enhanc
88 Vertical EnhanceTEXT33
89 Horizontal filter SW
90
91
RF/VIDEO/DSUB-COMP
RF/VIDEO/DSUB-COMP
RF/VIDEO/DSUB-COMP
RF/VIDEO/DSUB-COMP
RF/VIDEO/DSUB-COMP
RF/VIDEO/DSUB-COMP
RF/VIDEO/DSUB-COMP
RF/VIDEO/DSUB-COMP
RF/VIDEO/DSUB-COMP
RF/VIDEO/DSUB-COMP
RF/VIDEO/DSUB-COMP
RF/VIDEO/DSUB-COMP
DVI-PC/DVI-STB/DSUB-RGB
DVI-PC/DVI-STB/DSUB-RGB
DVI-PC/DVI-STB/DSUB-RGB
DVI-PC/DVI-STB/DSUB-RGB
DVI-PC/DVI-STB/DSUB-RGB
DVI-PC/DVI-STB/DSUB-RGB
DVI-PC/DVI-STB/DSUB-RGB
DVI-PC/DVI-STB/DSUB-RGB
DVI-PC/DVI-STB/DSUB-RGB
DVI-PC/DVI-STB/DSUB-RGB
DVI-PC/DVI-STB/DSUB-RGB
DVI-PC/DVI-STB/DSUB-RGB
htness Center (CM
htness Center (CM
htness Center (CM
htness Center (CM
htness Center (CM
htness Center (CM
htness Center (CM
htness Center (CM
htness Center (CM
htness center (CM) offse
htness center (CM) offse
htness center (CM) offse
htness center (CM) offse
htness center (CM) offse
htness center (CM) offse
Enhancer Gain
ADJ. ItemsModePWBPWBPWB PANEL
ness(Y-Enhancer Gain for HV
ness(Y-Enhancer Gain for HV
ness(Y-Enhancer Gain for HV
ness(Y-Enhancer Gain for HV
ness(Y-Enhancer Gain for HV
ness(Y-Enhancer Gain for HV
ness(Y-Enhancer Gain for HV
ness(Y-Enhancer Gain for HV
ness(Y-Enhancer Gain for HV
ness(Y-Enhancer Gain for HV
ness(Y-Enhancer Gain for HV
ness(Y-Enhancer Gain for HV
ness(Y-Enhancer Gain for HV
ain for Black Stretch functionExcept OFF/LOW/HIGH mode6332
HHPF0
HHPF1
HHPF2
COOL255255Ǎǘ
COOL255255Ǎǘ
COOL255255Ǎǘ
NORMAL255255Ǎǘ
NORMAL255255Ǎǘ
NORMAL255255Ǎǘ
WARM255255Ǎǘ
WARM255255Ǎǘ
WARM255255Ǎǘ
BLACK & WHITE255255Ǎǘ
BLACK & WHITE255255Ǎǘ
BLACK & WHITE255255Ǎǘ
COOL255255Ǎǘ
COOL255255Ǎǘ
COOL255255Ǎǘ
NORMAL255255Ǎǘ
NORMAL255255Ǎǘ
NORMAL255255Ǎǘ
WARM255255Ǎǘ
WARM255255Ǎǘ
WARM255255Ǎǘ
BLACK & WHITE255255Ǎǘ
BLACK & WHITE255255Ǎǘ
BLACK & WHITE255255Ǎǘ
103
104
105
106
107
108
109
110 Enhancer
111 Corin
112
113
114
115
116
117 Corin
118
119 YFRNR in
120 HD-NTSC, HD-PAL
121 4
122
123 YFRNR in
124
125 CFRNR in
126 HD-NTSC, HD-PAL
127
128
129 CFRNR in
130
131 Vertical Enhancer Gain for Y/G
132
133
134
135 Vertical DSB Gain for Y/G
136
137
138 Vertical DSB Corin
139
140 Vertical Enhancer Cli
141
142 Vertical Cli
143
144 Vertical Non Linear Peakin
145
146 Horizontal Enhancer Gain for Y/R
147
148
149
150 Horizontal DSB Gain for Y/R
151
152
153 Horizontal DSB Corin
154
155 Horizontal Enhancer Cli
156
157 Horizontal Cli
158
159
160
161 Horizontal Non Linear Peakin
162
163 Horizontal HPF Peak Fre
164
165
166 Initial value of ContrastExtend 1 of Panel Life function12793
167 Interval time of correction timeExtend 1 of Panel Life function12710
168
dditional value of ContrastExtend 1 of Panel Life function1271
169 Initial value of ContrastExtend 2 of Panel Life function12763
170 Interval time of correction timeExtend 2 of Panel Life function1276
dditional value of ContrastExtend 2 of Panel Life function1271
171
172 Menu Init. Contrast
173 Menu Init. Contrast
174 Menu Init. Contrast
175 Menu Init. Bri
176 Menu Init. Bri
177 Menu Init. Bri
178 Menu Init. Color
179 Menu Init. Color
180 Menu Init. Color
181 Menu Init. Shar
182 Menu Init. Shar
183 Menu Init. Shar
For Dynamic7162
For Natural7162
For Cinema7151
For Dynamic6231
For Natural6231
For Cinema6233
For Dynamic6236
For Natural6231
For Cinema6221
For Dynamic3020
For Natural3015
For Cinema3010
icture152
ޓMulti
icture158
ޓMulti
icture77
1515
151
151
1515
1515
1515
74
71
71
74
71
154
1515
30
32
70
10
158
630
1515
15
30
32
77
10
1510
151
630
32
32
: should be followed previous data
Changed Component
19
42PD7200 (PW2)
p.(
p.(
(
])
(
])
(
])
(
])
(
])
(
])
(
])
(
])
(
])
p
)
p
p)
p
p)
p
)
p
)
(CM)
p)
(CM)
p)
(CM)
p)
(CM)
p)
(CM)
p)
(CM)
p)
p
p
p
)L
p
'
p
L
p
p
p
p
L
p
L
)
: shoule be adjusted
: should be followed previous data
ADJFunctionMax. Default
No.ValueFORMATTER VIDEO TUNER PDP
184 Menu Init. Color Temp.(Cool[0]/Normal[1]/Warm[2]/B&W[3])For Dynamic30
185 Menu Init. Color Tem
186 Menu Init. Color Tem
187 Menu Init. Black stretch
188 Menu Init. Black stretch
189 Menu Init. Black stretch
190 Menu Init. YNR
191 Menu Init. YNR
192 Menu Init. YNR
193 Menu Init. LTI
194 Menu Init. LTI
195 Menu Init. LTI
196 Center of Shar
197 Center of Shar
198 Center of Shar
199 Center of Shar
200 Center of Shar
201 Color Center
202 Color Center
203 Color Center
204 Tint Center
205 Tint Center
206 Tint Center
207 Shar
208 Shar
209 Shar
210 Shar
211 Shar
212 Shar
213 Shar
214 Shar
215 Shar
216 Shar
217 Sharpness Gain(S.VIDEO
ness(HV Enhancer Gain for Y)HDMI(480i/576i
ness(HV Enhancer Gain for Y)HDMI(480p/576
ness(HV Enhancer Gain for Y)HDMI(720
ness(HV Enhancer Gain for Y)HDMI(1080i-50/60
ness(HV Enhancer Gain for Y)HDMI(VGA
For Dynamic32
For Natural31
For Cinema30
For Dynamic20
For Natural20
For Cinema20
For Dynamic32
For Natural31
For Cinema30