Hisense XQG70-HR1014, XQG70-HR1014S Customer Service Manual

Hisense & Whirlpool

Customer Service Manual

XQG70-HR1014

Content

1 Safety Items

2 Specification

3 Control Panel

4 Washer Characteristics

5 Install Introduce

6 Structure Perspective

7 Breakdown Maintenance Index

8 Main Part Parameter

9 Timer Wire Diagram

XQG70-HR1014S

Version 1

Customer Service

1. Safety Items

1.1 Please don’t use illegal spare parts

the spare parts of our washer have been special design and strict

test ,the function reach national and corporation criterion, and the machine

can safe、good work, in process of maintenance, if you want replace the

component part, please firstly choose the part that our company

supply ,and then change it .if you don’t ,the some wrong happened ,the

company will not be responsible for it.

1.2 Machine must be safe ground connection

(1) Before install and maintenance ,must be make sure good ground

connection in customer home, if no, it can make more serious static

phenomenon ,the customer will be scared or hurted,please make sure

warn customer and solve it himself

(2) Please don’t use transformer, universal plug、power socket and so on，

prevent damage machine and hurt customer himself and customer’s

belongings because of too large power

(3) Such as the plug and the socket do not match, the customer change the

power socket ,anybody can not change the plug of machine

1.3 using attention and maintenance safe

(1) before clearing and maintenance, must be cut off power supply

(2) after machine using or adjust done, should be close water source and

unplugged the power cord

Version 1

Customer Service

(3) when machine using, please fellow the basic safe rules

a. please don’t touch or operate washer when your hand humid or

barefoot

b. unplugged the power cord, please do not pull it

c. the washer not insolate, also not be wet water

d. please don’t operate washer when nobody take care of the children

e. before wash, must be clear the stuff at the pocket, like as coins、paper、

pen and so on

f. when washer spin, don’t open the cover

g. please protect control panel, don’t use sharp objects to scratch,

otherwise may lead to water infiltration, and may be leakage

Version 1

Customer Service

2. S

pecification

Parameter \ SKU XQG70-HR1014 XQG70-HR1014S

The biggest spin speed 1000rpm

The largest wash volume 7.0kg

Temperature range 95°

appearance of color White/Silver

size 600x440x850

Net weight 66KG

Voltage 220-240V

Frequency 50Hz

Fuse 14A

Heater Power 1900W

Power cord length 120cm

Drum volume 46L

Door diameter 320mm

Door open angle 172°

Version 1

3. Control panel

Version 1

4.

4.1 Panel function button

Prewashoak

Add the powder detergent or the powder degerming agent in the prewash

chamber.

Recommended for laundry which is heavily soiled or which should be

degermed, the duration can be chose to be 28 minutes , 38 minutes or 48 minutes.

During the 18 minutes from the beginning, the drum is turning, then it will stop and

the laundry is soaked. In the end, the water in the tub is drained off.

Temp.

On selecting a programme, a predefined temperature is displayed. Press

“Temp.” to set another temperature.

Extra Rinse

An extra rinse is added for each press of the button. Up to 3 rinses can be

selected, to prolong the rinse cycle.

The times of rinses can be displayed.

This option is particularly suitable for areas with very soft water or for

washing baby linen, and helps with allergies.

Wash Time

Wash time can be changed when press this button, accroding with different

programme, the range of -90~10 minutes is max.

Spin Time

Version 1

Customer Service

Rinse hold

Delay

Select programme , temperature and options.

This function is only suitable for spin programme.

For the Spin Programme,pressing the button to select any one kind of time

such as 5 minutes, 8 minutes, 10 minutes, 14 minutes.

Spin Speed

Every programme has a predefined spin speed .

Press the button to set another spin speed.

If spin speed “0”se lected, the final spinning is cancelled, and the

is drained out only.

However,intermediate spin phases remin during water

rinse.

without progressing to the final spin cycle, to avoid creasing and prevent colours

If you selected “Rinse hold”,the laundry remains in the last rinse water

from changing.

To terminate the “Rinse Hold” by draining the water, without any

spinning, press the “Start /Pause” button.

To terminate the “Rinse Hold” by spinning the laundry, press the “Spin”

button to select the desired spin speed and then “Start /Pause” to start the spin

cycle.

The delay allows to run the machine at the consumer

’s convenience, for

example at night when electricity is cheaper.

Version 1

Customer Service

The time delay indication disappears when the remaining programme time

Press the “Start Delay ”button to select the delay time by 1 to 23 hours.

Press the “start/pause”button.

indication next to the “Start Delay”

button lights up and countdown of the delay time begins.

To cancel the “Delay”

Once having pressed the “start/pause”button, the number of hours preselected

can be reduced by pressing again the “

Delay”b

utton.

starts and it is replaced by the remaining programme time.

Be

fore you press the “Start/Pause”button:

After having pressed the “Start/Pause”button:

Turn the programme selector to another position or press the “Reset”button.

from the time display.

Press the reset button for at least 3 seconds the start delay time

disappears

Programme start

Open the tap and press the “start/pause”button,the indication lamp next

to the “start/pause”button light up .the programme sequence indicator shows

the current programme phase, running from left to right through wash、rinse、

spin/drain.

The time display show the remaining programme time.

Programme end

All the lights of the programme sequence indicator are off, and the “Door

Open”indication lights up.

Version 1

Customer Service

After every 50whole cycles, the indication light“ ”light up until the user

select“Drum Clear”programme to clean the drum.

Reset a running programme before the end

The “Reset”button cancels a programme before the end.

Any existing water is drained out before the door can be opened.

Form clear

Press the “Form Clear”button before the prohgramme start,when the last

rinse ,the machine can adjust the level and the strength of the water to clear the foam

remain.

Suggest drum clean

Turn the programme selector to the “Off”position.

Close the water tap.

Open the door and unload the machine.

Leave the door open to allow the drum to dry.

Change programme and/or options after programme start

Press the “Start/Pause”button to pause the programme.

Select the new programme (with temperature),any options and another spin

speed if you want.

Press the “Start/Pause”button again. The new programme continues at the

same position where the previous programme was interrupted.Do not add detergent

for this programme.

Press the “Reset”button for at least 3 second.