WFU6012/WFU6012S
This function provides automatic safety protection
function that makes automatic test, diagnosis and
proper response to the early failure.
A. “Power” button
B. “Start/Pause” button
C. Program selector
D. Program and function status display window
E. “Select” button
Short User Manual
F. “Option” button
G. “Spin” button
H. “Temp.” button
I. “Load” button
J. “Delay” button
J I H G F E AD C B
Program
Cotton
20ºC, 30ºC, 40ºC,
60ºC, 95ºC
Synthetics
20ºC, 30ºC, 40ºC,60ºC
Mix
20ºC, 30ºC, 40ºC
Quick
20ºC, 30ºC, 40ºC
Silk/Delicate
20ºC, 30ºC, 40ºC
Wool
20ºC, 30ºC, 40ºC
Hand Wash
20ºC, 30ºC, 40ºC
Large Items
20ºC, 30ºC, 40ºC,60ºC
Down Jacket
20ºC, 30ºC, 40ºC
95ºAntibacterial
95ºC
Drum Clean
20ºC, 30ºC, 40ºC,60ºC
95ºC
Silent Wash
20ºC, 30ºC, 40ºC
Rinse +Spin
Spin
Sportswear
20ºC, 30ºC, 40ºC
Care Label
30
30
Material / Level of Soiling
-Washing temperature selected as per the Care Label instruction.
Heavily and moderately soiled cotton, or linen.
For very heavily soiled items select the "Prewash" function(1).
Moderately soiled synthetics, cotton blended fabrics.
Mixed loads of moderately soiled cotton and synthetic fabrics.
Cotton, mixed fabrics. Items worn for a short time or newly bought.
Soft delicate fabrics and machine washable silk. (Refer to the washing label attached to the clothing).
Machine washable wool. (Refer to the washing label attached to the clothing). Suggested washing
temperature - 40˚C.
Clothing marked as "Hand washable". If Rinse Hold is selected do not leave items to soak for too long.
Program adapted to wash large items - e.g. Curtains, sheets, duvet covers.
Program adapted to wash down jackets.
Program to effectively extinguish bacteria in clothing and cotton fabrics under high temperature
without discolouring.
Program to remove dirt and bacterial residue that can breed in the machine after it has been used for
a period, especially when low temperature washes are used regularly.
Program adapted to be used at night with little noise. The End of Program alarm is automatically
deactivated(2).
This prgram is defaulted to two rinses and one spin.
Select the length and speed of the spin manually.
Synthetic fabric sportsware.
Maximum
Prewash
Wash
Load
kg
6.0
2.5
2.5
1.0
2.0
2.0
2.0
2.5
2.0
2.5
2.5
2.0
Detergent
Compartment
Main
wash
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Softener
Delay
Prewash
Load Extra
Wash Program Functions
Default
Intensive
wash
rinse
rinse
times
Eco wash Rinse hold Spin
2
2
1
2
2
2
2
2
2
1
2
2
0
2
Temp.
Maximum
spin speed
rpm
12002
1200
1200
800
600
600
800
1000
600
1200
600
800
1200
1200
1000
- Optional Functions Yes - Detergent Required - Cannot be selected
(1) Wash performance test programs are: cotton 60˚C, load L-6, maximum speed, intensive wash; cotton 40˚C, load L-6,maximum speed, intensive wash.
(2) At the end of the 'Silent wash' program, the drum will rotate for 10 seconds and rest for 10 seconds for air circulation and reducing creasing of the clothes. This will continue for 12 hours (Timer on the screen display will be locked to be 0:01), unless it is
interrupted by pressing the start/pause button to complete the program.
(3) To protect clothing, the spin is limited to 800rpm.
(3)
PARAMETER
Model
Washing Capacity
Max.spin speed
Net Weight
Dimension(WXDXH)
Rated Voltage
Heating Power
Washing Power
Add detergent, close the door and set the program
Load the items to be washed in the drum. Add the detergent
into the relevant compartments for the type of program you
are going to select, see the Detergent Compartment section
on page.
1.Press the On/Off button.
2.Rotate the selector dial to the required program.
3.The display window will show the program length (hours :
minutes), temperature, spin speed and additional function
options.
4.The recommended temperature and spin speed will flash on
the display. Press the Temperature button to set the desired
wash temperature and the spin button to select the spin speed.
Select additional functions
To change or add any of the functions press the respective
button and the display will flash. Press the button again until
the chosen option flashes and then press select.
rewash
P
Press the Option button until the Prewash icon flashes and
press Select. Add detergent into the Soak compartment of
the detergent drawer.
This function cannot be selected if you select Eco Wash
function.
Eco wash
Press the Option button until the Eco icon flashes and press
Select. This function is designed to reduce the amount of
electricity, water used and save time during the program.
The Eco icon will continue to flash until the program is
finished.
Rinse hold
Press the Option button until the Rinse Hold icon flashes
and press Select. Selecting this function will keep the
clothing suspended in water after the last rinse, to prevent
the fabrics from creasing. To spin the clothing, and complete
WFU6012/WFU6012S
6.0kg
1200rpm
58kg
595X460X850mm
220V-240V
1900W
300W
the program, press the Start / Pause button. The items can
then be removed straight away after the program has finished.
This function cannot be selected if you select Eco Wash
function.
Extra rinse
Press the Option button until the Extra Rinse icon flashes and
press Select.
This function cannot be selected if you select Eco Wash function.
Intensive wash
Press the Option button until the Intensive Wash icon flashes
andpress Select. This function will prolong the wash time with
a more intense wash action for washing heavily soiled items.
This function cannot be selected if you select Eco Wash function.
Delay Function
This function will allow to select the time your wash program
will start.
Select Delay after you have selected the program and other
options.
•Press the Delay button once and the delay time will increase
by 30 minutes. Press and hold the button and the delay time
will increase by 30 minutes every 0.4 seconds. The delay time
can be programmed for between 30 minutes to 24 hours. To
cancel the selection release the button and then press it again.
•The delay time must be longer than the wash program length
as the delay time is the time the program will finish.
For example: if the selected program time is 02:28, the delay
time selected must be between 02:30 and 24:00.
•After the delay time has been selected press the Start /Pause
button and the display will start to count down. When the delay
time is down to the program length time the Delay icon will go
out and the program will start.
•To cancel the delay time, after the Start /Pause button has been
pressed, but before the program has started, it will be necessary
to press the Power button and turn the washing machine off.
•The Delay function is not available for some programs, e.g.
Rinse + Spin, Spin.
Load
This model is capable of automatically adjusting the program
to take into account the weight of the load placed inside the
drum. It is possible to cancel this function by pressing the Load
button. The weight of the load can be selected manually.
•Press the Load button and the load weight displayed will
increase. The display is the weight in kilograms within the range
allowable for the wash program selected.
To Start the Program
After you have selected your options and placed detergent within
the dispense turn on the water tap and press the Start / Pause
button. The screen will display the current program progression
with icons from left to right. It also displays the remaining
program time.
End of the Program
When the program is finished the display will show “End” and
the machine will turn off after 30 seconds. The door lock will
also release within 2 – 3 minutes.
1.Turn off the water tap.
2.Open the door and remove the washing.
3.Leave the door open slightly to discharge any humidity from
inside.
To Cancel the Program or Reselect the options
1.Press the On/Off button for 2 seconds to shut down the program.
2.Select the new program and options.
3.Press Start / Pause to start the new program without adding any
extra detergent.
Mute Function
The buzzer and alarm can be turned off by pressing the Delay
and Load buttons at the same time for 3 seconds.
Child lock
To protect children the appliance has a Child Lock function.
This will disable the program selector dial and the option buttons.
•After the program has started press the Temp and Spin at the
same time for 3 seconds. The display will show SAFE ON and
the Child Lock icon will flash.
•Follow the above steps to unlock this function.
Door Lock Icon
After the program starts the Door Lock icon will flash and the
door will be locked.
•The door is always locked when a program is running. It is not
possible to open the door whilst the icon is flashing and trying
to forcibly open the door will cause damage to the appliance.
•If you wish to open the door due to an emergency you must
press the Start / Pause button. It is important to check the level
of the water inside the drum, and the water temperature, before
trying to open the door.
•If the door will not open after 2 – 3 minutes you can select the
spin program to drain the water from the drum. Switch off the
appliance and open the door.
Safety Notice. If the program is interrupted during the wash the
temperature of the items inside, and the drum, may be very high.
To avoid any scalding, or burns, care must be taken before
removing any items from the drum.
Tap Icon
Inlet Water Tap Icon Flashes
If the appliance detects that no water has entered the drum the
Tap icon will flash. Make sure the water tap is turned on and
press the Start / Pause button. If the icon continues to flash
please refer to the user manual Failure Handling Guidance.
If this should happen during the program the display will show
a failure code. A description of the failure codes can be found
in the User Manual.
Adding Clothes After the Program Has Started
If you need to add other items of clothing after the program has
started you must check the level of the water inside the drum.
If it safe to open the door press the Start / Pause button.
•The remaining program time on the display will flash.
The door lock indicator will go out and the door can be opened
after 2 – 3 minutes.
•If the door lock does not stop flashing this indicates that the
temperature inside the drum is above 50˚C, or it is too late in
the program to add further items of clothing.
Programme instructions
1. The standard 60℃ and 40℃ cotton programmes,referred to
as ‘standard 60℃ cotton programme’ and ‘standard 40℃ cotton
‘standard 60℃ cotton programme’ and ‘standard 40℃ cotton
programme’,and that they are suitable to clean normally soiled
cotton laundry and that they are the most efficient programmes
in terms of combined energy and water consumptions for
washing that type of cotton laundry,in addition,the actual water
temperature may differ from the declared cycle temperature.
2. The power consumption of the off-mode is 0.49W,and of
the left-on mode is 0.49W.
3. The type of detergents suitable for the various washing
temperatures.
4. Remaining moisture content:53%.
5. The information of standard programmes:
Main Wash
Duration (Min)
Programme
(Min)
Energy
Consumption
(kWh)
Water
Consumption –
Main Wash (L)
Total Water
Consumption (L)
131 162 162
173 204 204
0.55 0.86 0.85
11 11 17
32 32 43
W10800154A
Loading...