Page 1
RD-65WR4SY1
Page 2
Hisense Refrigerator
Page 3
Hisense Refrigerator
Page 4
Contents
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _
Safety and warning information_ __ _ _ _ _ 3
Description of the appliance _ _ _ _ _ _ _ _
Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
First use and installation_ _ _ _ _ _ _ _ _ _
Daily use _ _ _ _ _ _ __ _ _ _ _ _ _ _ _ _ _
9
10
11
13
5
7
7
8
Helpful hints and tips
Cleaning and care
Troubleshooting _ _ _ _ _ _ _ _ _ _ _ _ _
Before Requesting Service
Disposal of the appliance
Safety and warning information
For your safety and correct usage before
installing and first using the appliance, read
this user manual carefully, including its hints
and warnings. To avoid unnecessary
mistakes and accidents, it is important to
make sure that all people using the
appliance are thoroughly familiar with its
operation and safety features. Save these
instructions and be sure that they remain
with the appliance if it is moved or sold, so
that a using it throughout its life will be
properly informed on its correct appliance
usage and safety.
For the safety of life and property, keep the
precautions of these user's instructions as
the manufacturer is not responsible for
damages caused by omission.
,
General safety
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or a lack of experience and knowledge,
unless they have been given supervision
or instruction concerning the use of the
appliance by a person responsible for
their safety.Children should be supervised
to ensure that they do not play with the
appliance.
Keep all packaging away from children as
there is risk of suffocation.
If you are discarding the appliance,pull the
plug out of the socket, cut the connection
cable (as close to the appliance as you
can) and remove the door to prevent
children playing from suffering an electric
shock or from closing themselves inside it.
If this appliance,featuring a magnetic door
seals, is to replace an older appliance
having a spring lock (latch) on the door or
lid, be sure to make the spring lock
unusable before you discard the old
appliance. This will prevent it from
becoming a death trap for a child.
Caution! Keep ventilation openings
clear of obstructions.
The appliance is intended for keeping
food and/or beverages in a normal
household as explained in this instruction
Do not use a mechanical device or any
artificial means to speed up the thawing
process.
Do not use other electrical appliances
(such as ice cream makers) on the inside
of refrigerating appliances, unless they
are approved for this purpose by the
manufacturer.
Do not damage the refrigerant circuit.The
refrigerant isobutane (R600a) is contained
within the refrigerant circuit of the
appliance. a natural gas with a high
level of environmental compatibility, which
is nevertheless flammable.
manual.
It is
Safety for children and others who are
vulnerable
During the transportation and installation of
the appliance, make certain that none of the
components of the refrigerant circuit become
damaged.
-avoid open flames and sources of ignition.
-thoroughly ventilate the room in which the
appliance is located.
Caution: Risk of fire!
It is dangerous to alter the specifications
or modify this product in any way. Any
damage to the cord may cause a
shortcircuit, fire, and/or electric shock.
_
_ _ _ _ _ _ _ _
14
Hisense Refrigerator
Page 5
1. The power cord must not be lengthened.
2. Make sure that the power plug is not
or damaged. A or damaged
power plug may overheat and cause a fire.
crushed crushed
3. Make sure that you can
plug of the appliance.
access the main
4. Do not pull the main cable.
5. If the power plug socket is loose, do not
insert the power plug. There is a risk of
electric shock or fire.
6. You must not operate the appliance
without the interior lighting lamp cover.
Do not place food directly against the air
outlet inside the refrigerator .
Daily use
Do not store flammable gases or liquids
inside the appliance. There is a risk of an
explosion.
Do not operate any electrical appliances
within the appliance (e.g. electric ice
cream makers, mixers, etc.).
When unplugging, always pull the plug
from the . Do not pull on the
cord.
main outlet
Do not place hot items near the plastic
components of this appliance.
Do not place food products directly
against the air outlet on the rear wall.
1)
Frozen food must not be refrozen once it
has been thawed out.
2)
The appliance's manufacturing storage
recommendations should be strictly adhered to.
Refer to instructions .
Do not place carbonated or fizzy drinks in
the freezer compartment as it creates
pressure on the container, which may
cause it to explode, resulting in damage to
the appliance.
2)
Ice lollies can cause frost burns
if consumed straight from the refrigerated
compartment.
2)
the relevant for storage
(popsicles)
Warning!
Care and cleaning
Before maintenance, switch off the
appliance and disconnect the main plug
from the main outlet.
Do not clean the appliance with metal
objects, steam cleaners, ethereal oils,
organic solvents or abrasive cleansers.
Do not use sharp objects to remove frost
from the appliance.
Important!
Installation
For electrical connection, carefully, follow the
instructions given in this manual.
Unpack the appliance and check it.If it is
damaged, do not plug in the appliance;
contact the shop immediately from
where
you purchased it.In this case, keep all
packing materials.
It is advisable to wait at least four hours
before connecting the appliance to allow
the refrigerant to flow back into the
compressor.
Adequate air circulation should be around
the appliance, as a lack of this leads to
overheating. To achieve sufficient
Store pre-packaged frozen food in accordance
with the frozen food manufacturer’s instructions.
2)
7. The fridge is only applied with power
supply of single phase alternating current of
220~240V/50Hz. If fluctuation of voltage in
the district of user is so large that the voltage
exceeds the above scope, for safety sake,
be sure to apply A.C. Automatic voltage
regulator of more than 350W to the fridge.
The fridge must employ a special power
socket instead of common one with other
electric appliances. Its plug must match the
socket with ground wire.
Do not place the appliance in direct
sunlight.
When disposing of the appliance do so
only at an authorized waste disposal
centre. Do not expose to flame.
Warning! Any electrical component
(power cord, plug, compressor) must
be replaced by a certified service
agent or qualified service personnel.
Do not store explosive substances such
as aerosol cans with a flammable
propellant in this appliance.
This appliance is intended to be used
in household and similar applications
such as:
-staff kitchen area s in shops, offices
and other working environments;
-farm houses and by clients in hotels,
motels and other residential type
environments;
-bed and breakfast type environme nts;
-catering and similar non-retail
applications.
Hisense Refrigerator
Page 6
Control panel
The temperature control panel is located in
the refrigerator chamber, on the right side
wall. you can adjust the refrigerator and
freezer temperature by press the button on
the panel.
Freezer Temperature Setting
When the machine is not in the
temperature setting mode, If you want to
set the temperature inside the freezer , you
can follow the two steps below:
1. Press “select” button, until the freezer
light is on, and the LED indicator will indicate
the current temperature setting in freezer.
2. Then you can set the temperature from -
14 C to -22 C by pressing and , press the
button once, the temperature will increase or
decrease 1 C ,and the LED
Wherever possible, the back of the
product should be against a wall to avoid
touching or catching warm parts
(compressor, condenser) and to prevent
the risk of fire; follow the instructions
relevant to installation.
The appliance must not be located close
to radiators or
Make sure that the main plug is accessible
after installation of the appliance.
cooking appliances.
Any electrical work required to do the
servicing of the appliance should be
carried out by a qualified electrician or
person.
This product must be serviced by an
authorized service center, and only
genuine spare parts must be used.
authorized
2) If the appliance contains a freezer compartment.
1) If the appliance is Frost Free.
indicator will turn down or turn up between
“cold”and“colder”, until the required
temperature is displayed. There is a
corresponding relationship between
temperature setting and indicator lights, you
can find it out in the table below:
Fridge
Temperature
9℃ 8℃ 7℃ 6℃ 5℃ 4℃ 3℃ 2℃ 1℃
Setting
Freezer
Temperature
-14℃ -15℃ -16℃ -17℃ -18℃ -19℃ -20℃ -21℃ -22℃
Setting
fast
freeze
cold indicator-1
half
light
full
light
full
light
full
light
full
light
full
light
full
light
full
light
full
light
full
light
indicator-2
half
light
full
light
full
light
full
light
full
light
full
light
full
light
full
light
indicator-3
half
light
full
light
full
light
full
light
full
light
full
light
indicator-4
half
light
full
light
full
light
full
light
colder indicator-5
half
light
full
light
ventilation, follow the instructions relevant
to the installation.
Service
Hisense Refrigerator
Page 7
1. Remove the light cover .
2. Use the cross screw driver to take the
screw out.
3. Pull out the joint cable, and take down the
old LED light.
4. Replace with a new LED light that is
same to the origin, screw the screw in.
5. Replace the light cover.
Unplug the mains plug.
Press the bulb in the center with finger.
Warning! If the LED light bulb is
damaged, DO NOT CHANG IT BY
THE USER!
Before changing the light bulb, switch off
the appliance and unplug it, or pull the
fuse or the circuit breaker.
To switch off the appliance.
Changing the light bulb carry out by
inexperienced persons may cause injury or
serious malfunctioning.it must be replaced
by a qualified persons in order to avoid a
hazard. Contact your local Service Force
Center for help.
Fast Freeze
If you need the temperature inside the
freezer to drop rapidly, press the FAST
FREEZE button, all the LED indicator are full
light, the freezer compartment will operate in
FAST FREEZE mode for 24 hours, and the
setting temperature is -23 C.If you change
the temperature setting, the fridge will exit
FAST FREEZE mode.
ATTENTION: Normally we advise you
setting the temperature on “Mid”position.A
colder setting on the temperature regulator
means more energy will be consumed. In
FAST FREEZE mode the compressor will
run continuously or even non-stop!
FRIDGE TEMPERATURE
When the machine is not in the
temperature setting mode, If you want to
set the temperature inside the fridge , you
can follow the two steps below:
1. Press “select”button, until the fridge light
is on, and the LED indicator will indicate the
current temperature setting in fridge.
2. Then you can set the temperature from
1 C to 9 C by pressing and , press the
button once, the temperature will increase or
decrease 1 C,and the LED indicator will
turn down or turn up between “cold”and
“colder”, until the required temperature is
displayed. There is a corresponding
relationship between temperature setting
and indicator lights, you can find it out in the
same table upper.
Changing the light bulb
Before changing the light bulb, either the
refrigerator or disconnect the electricity
leading into the refrigerator at the main
power supply. Failure to do so could result in
electrical shock or personal injury.
Fixing the handle
Before you use the product, please check
the handle . If the handle
is loose, you should fix it with the hexangular
screwdriver in the clockwise direction, then it
can be used normally.
of the refrigerator
The freezer compartment consist of 2
sections. One is the 4-star section and the
other one is the 2-star section.
The temperature for 2-star section is
always below -12 , where the
temperature for 4-star section is
always below -18 .CC
Hisense Refrigerator
Page 8
Description of the appliance
Note: Due to unceasing modification of our products your refrigerator may be slightly different
from this Instruction Manual, but its functions and using methods remain the same.
View of the appliance
1. Light cover
2. LED light (inside)
3. Screw hole cover
4. Wind channel part in freezer chamber
5. Shelf part
6. Ice tray part
7. Ice box
8. Light cover
9. LED light (inside)
10. Wind channel part in refrigerator chamber
11. Shelf part
12. Shelves assembly
13. Multifunctional drawer
14. shelves assembly
15. Crisper box part
16. Roll wheel
17. Adjustable bottom feet part
18. Upper hinge cover
19. Door switch
20. Freezer door rack
21. Gasket part
22. Middle hinge part
23. Shelf
cover
24. Egg tray
25. Small shelf
26. Door switch
27. Refrigerator door rack(middle)
28. Gasket part
29. Refrigerator door rack(lower)
FREEZER
REFRIGERATOR
FREEZER
REFRIGERATOR
1
3
4
5
7
6
10
2
8
11
12
13
14
15
16
17
29
28
27
26
25
24
23
22
21
201918
9
(H650TS)
7
Hisense Refrigerator
Page 9
Important!
For this
reason, space should
be available around the . It is
advisable for there to be 75mm separating
the back of the to the wall at
least 100mm of space on its two
of over 100mm from its top and a
clear space in front to allow the doors to
open 160°.
It is necessary to have good
ventilation around the refrigerator to allow
for the dissipation of heat, high efficiency,
and low power consumption.
sufficiently cleared
refrigerator
refrigerator
sides, a
height
Warning! Before installing, read the
instructions carefully for your safety
and the correct operation of the appliance.
Position the appliance away from sources
of heat such as stoves, radiators, direct
sunlight, etc.
Maximum performance and safety are
guaranteed by maintaining the correct
indoor temperature for the class of unit
concerned, as specified on the rating
plate.
Before using the appliance for the first
time, wash the interior and all internal
accessories with lukewarm water and
some neutral soap so as to remove the
typical smell of a brand new product, then
dry thoroughly.
Appliances must not be exposed to rain.
Sufficient air must be allowed to circulate
in the lower rear section of the appliance,
as poor air circulation can affect performance. Built-in appliances should be
positioned away from heat sources such
as heaters and direct sunlight.
Leveling
Electrical connection
Caution! Any electrical work required to
install this appliance should be carried out by
a qualified or person.authorized
Warning!This appliance must be grounded.
The manufacturer declines any liability should
these safety measures not be observed.
the floor. You can also adjust the level by
the appropriate level
the front (use your fingers or a suitable
spanner).
unscrewing adjustment
in
The appliance should be level in order to
eliminate vibration. To make the appliance
level, it should be upright and both
adjusters should be with in stable contact
First use and installation
Cleaning before use
Installation Positioning
75mm
100mm
100mm
adjustable
bottom feet
part
8
Hisense Refrigerator
Page 10
Daily use
Accessories 1)
Movable shelves/trays
Various glass, plastic storage shelves or
wire trays are included with your appliance.
The walls of the refrigerator are equipped
with a series of runners so that the
shelves can be positioned as desired.
Positioning the door shelves
To permit storage of food packages of
various sizes, the middle door shelves can
be placed at different heights.
Freezer food compartment 2)
For freezing fresh food and storing frozen
and deep-frozen food for a long time.
Vegetable Drawer
For storing fruit and vegetables.
Ice-cube tray
For making ice and storing ice-cubes.
Refrigerator compartment
For storing the food which needs not
being frozen and different part suitable for
different kind of food.
Thawing food 2)
In the refrigerator compartment.
At room temperature.
In a microwave oven.
In a conventional or fan oven.
Food once thawed should be re-frozen
only in exceptional cases.
1) If the appliance contains related
accessories and functions.
2) If the appliance contains a freezer
Ice Maker:Twist ice
Take out the ice making tray.
Fill the water in level of line.
Place the ice making tray in its original position.
When ice cubes are formed, clockwise twist the
knob to drop off ice cubes into the icebox.
Ice box is inadvisable to be used to make ice,
otherwise it may crack.
If it takes a long time to make ice, please do not
hold the ice tray directly to avoid the ice tray
sticking and hurting your hands.
Notice:
Humidity Conditioning
Deferent vegetable and fruits need deferent
humidity, you can condition humidity in the
crisper box.
Adjust the humidity conditioning slide block
crisper box part
crisper box cover part
humidity conditioning
slide block
The humidity conditioning slide b lo ck is on
the crisper box cover part.
Slide the block right or left, the si ze o f the
exit from which the air escape out will
become larger or smaller.
Larger size of the exit means lower hum idity
in the crisper box. smaller size of t he e xit
means higher humidity in the crisper box.
Multifunctional Drawer
Ice box is
inadvisable
to ma ke ic e
water level
Multifunctional
drawer
In multifunctional drawer the temperature is
Lower than the refrigerator compartment,
sometimes the temperature even can be
less than 0 C.
For storing fish, meat and sausage for a
short-term fresh.
Don’t store food that easily be frostbited ,
such as vegetable, fruits.
9
Hisense Refrigerator
Page 11
Hints for freezing
Prepare food in small portions to enable it
to be rapidly and completely frozen and to
make it possible to subsequently thaw
only the quantity required.
When first starting-up or after a period out
of use. Before putting the food in the
compartment let the appliance run at least
2 hours on the higher settings.
Hints for the storage of frozen food
Make sure that the commercially frozen
food was stored by the retailer.
Once defrosted, foods deteriorate rapidly
and can not be re-frozen.
Do not exceed the storage period
indicated by the food manufacturer.
Note: If the appliance contains related
accessories and function.
It is recommended to label and date each
frozen package in order to keep track of
the storage time.
Iced products, if consumed immediately
after removal from the freezer compartment,
can possibly cause skin to become freezer
burnt.
Wrap up the food in aluminum foil or
polyethylene (plastic) and make sure that
packages are airtight.
Do not allow fresh, unfrozen food to touch
food that is already frozen, thus avoiding
a rise in temperature of the latter.
Butter and cheese: these should be
placed in aluminum foil or
bags as much air as
possible.Milk bottles: these should have a
cap and should be stored in the bottle
rack on the door.
polyethylene
(plastic) removing
Hints for fresh food refrigeration
Do not store warm foods or evaporating
liquids in the appliance.
Do cover or wrap the food, particularly if it
Hints for refrigeration
Meat (all types): wrap in
bags and place on the glass shelf
above the vegetable drawer. For safety,
store in this way only one or two days at
the most.
Cooked foods, cold dishes, etc…: these
should be covered and may be placed on
any shelf.
polyethylene
(plastic)
Add bullet and move to the next
line down.
has a strong flavor.
Position food so that air can circulate
freely around it.
Helpful hints and tips
Noises during operation
Clicks- Whenever the compressor switches
on or off, a click can be heard.
Humming- As soon as the compressor is in
operation, you can hear it humming.
Bubbling- When refrigerant flows into thin
tubes, you can hear bubbling or splashing
noises.
Splashing- Even after the compressor has
been switched off, this noise can be heard
for a short time.
Energy saving tips
Do not install the appliance near stoves,
radiators or other sources of warmth.
keep the time the appliance is open to a
minimum.
Do not set the temperature colder than
necessary.
Make sure the side plates and back plate
of the appliance are at some distance
from the wall, and follow the instructions
relevant to installation.
If the diagram shows the correct
combination for the drawers, crisper and
shelves, do not adjust the combination
as
it would produce effect on energy
consumption.
Fruit and vegetables: these should be
thoroughly cleaned and placed in the
special provided.drawer
10
Hisense Refrigerator
Page 12
Troubleshooting
Problem Possible cause Solution
Appliance does not
work.
Appliance is not switched on.
Main plug is not plugged in or
is loose.
Fuse has blown or is defective.
Outlet is defective.
Switch on the appliance.
Plug the appliance into the
electrical socket.
Check fuse, replace if necessary.
Defective parts need
repaired
to be
by an electrician.
Warning! Before troubleshooting,
disconnect the power supply. Only a
qualified electrician of competent
person must carry out the trouble
shooting
that is not in the manual.
Important!
Repairs to the appliance may only be
performed by competent service engineers.
Improper repairs can give rise to significant
hazards for the user. If your appliance
needs repairing, please contact your
specialist dealer or your local
Center.
Customer
Service
Cleaning and Care
Cleaning and care
For hygienic reasons, the appliance interior,
including interior accessories, should be
cleaned regularly.
The appliance should be cleaned and
maintained at least every two months.
Warning! Danger of electrical shock!
The appliance should not be connected to
the during cleaning.
Before cleaning, switch the appliance off
and remove the plug from the
switch off, or the circuit
breaker or fuse.
main power supply
main power
supply, shut off
Notice!
Remove the food from the appliance
before cleaning. Store them in a cool
place well covered.
Never clean the appliance with a steam
cleaner. Moisture could accumulate in
electrical components.
Hot vapor can lead to the damage of
plastic parts.
Ethereal oils and organic solvents can
attack plastic parts, e.g. lemon juice or the
juice from an orange peel, butyric acid,or
cleansers that contain acetic acid. Do not
allow such substances to come into
contact with appliance parts.
Do not use any abrasive cleansers.
and keep
Clean the appliance and the interior
accessories with a cloth and lukewarm
Empty the appliance.
Pull out the power plug.
Clean thoroughly (see section: Cleaning
and Care).
Leave the door open to prevent odour.
Taking the appliance out of service
water. Commercially available dish
washing detergents may also be used.
After cleaning, wipe with fresh water and
a clean dish cloth.
Accumulation of dust at the condenser
increases energy consumption; clean the
condenser at the back of the appliance
once a year with a soft brush or a vacuum
cleaner.(Only for the outside-condenser
product)
Check the water drain hole on the rear
wall of the refrigerator compartment.
Clear a blocked drain hole with the aid of
something like soft green peg, an be
careful not to any damage to the
cabinet by sharp
After everything is dry, the appliance back
create
objects.
11
Hisense Refrigerator
Page 13
Unusual noises.
The compressor does
not start immediately
after changing the
temperature setting.
Door seal is not air-tight
(possibly after reversing the
door).
Appliance is not level.
The appliance is touching the
wall or other objects.
A component, e.g. a pipe, on
the rear of the appliance is
touching another part of the
appliance or the wall.
This is normal, no error has
occurred.
Carefully warm the leaking
sections of the door seal with a
hair dryer (on a cool setting). At
the same time, shape the warmed
door seal by hand so that it sits
correctly.
Readjust the feet.
Move the appliance slightly.
If necessary, carefully bend the
component out of the way.
The compressor starts after a
period of time.
Heavy build-up of
frost, possibly also on
the door seal.
Interior lighting does
not work.
The appliance is near a heat
source.
Light bulb is defective.
Please the “Installation
location” section.
refer to
Please look in the “changing the
Light Bulb “section.
The food is too warm.
Temperature is not properly
adjusted.
Door was open for an
extended period.
A large quantity of warm food
was placed in the appliance
within the last 24 hours.
Please the “Initial Start Up”
section.
refer to
Open the door only as long as
necessary.
Turn the
to a colder setting temporarily.
control panel
Appliance cools too
much.
Temperature is set too cold.
Turn the temperature regulator to
a warmer setting temporarily.
12
Hisense Refrigerator
Page 14
You are guaranteed with Hisense fridges. For detail, please see the Hisense guarantee condition
at page 1.
If the problem continues after taking the proper remedial actions, disconnect the power cord plug from the
wall outlet.
Transfer the items stpred in the fridge to a box or other container. Then contact the dealer from whom you
purchased this unit and be ready to provide information as listed in “REQUIRED INFORMATION” below.
CAUTION
To prevent any electrical shock hazards, do not disconnect the power cord plug from the wall
outlet with wet hands.
Required Information
Nature of malfunction
(as accura tely as possible)
1
Product number
Serial number
Customer’s name, address,
phone number
(inscribed on badge)
4
2
3
Pro of of purchase
5
Desired date for service visit
6
13
Before Requesting Serv ice
Hisense Refrigerator
Page 15
Correct disposal of this product
This symbol on the product, or in its packaging, indicates that this
product may not be treated as household waste. Instead, it should
be taken to the appropriate waste collection point for the recycling of
electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could
otherwise be caused by the inappropriate waste handling of this
product. For more detailed information about the recycling of this
product, please contact your local council, your household waste
disposal service, or the shop where you purchased the product.
Disposal of the appliance
It is prohibited to dispose of this appliance in domestic household waste.
Packaging materials
Packaging materials with the recycle symbol are recyclable. Dispose of the packaging in a
suitable container to recycle it.
Before disposal of the appliance.
1. Disconnect the main plug from the main socket.
2. Cut off the main cable and discard it.
waste collection
14
Hisense Refrigerator
Page 16
Loading...