Hisense LTDN42K680HK3DU, LTDN50K680HK3DU, LTDN55K680HK3DU User Manual
LTDN42K680HK3DU
LTDN50K680HK3DU
LTDN55K680HK3DU
RSAG2.025.4322SS
条形码定位框，长 35mm，高度请根
据长度等比例缩放。该定位框不做印
刷处理。物料号：
English
USER MANUAL
Before using the TV, Please read this manual
thoroughly, retain it for future reference.
I
Preface
Dear Hisense Customer,
We appreciate for your buying Hisense products, and believe that this wholly new product can bring you
innite pleasure. Before using the TV, Please read this manual thoroughly, retain it for future reference.
Our company does not assume any liability for any accident arising from violation of the matters of
attention and instruction on use in this manual.
This product involves high voltage. The user may not open the cabinet without authorization. Any
person other than the repairer may not repair and replace parts without authorization to avoid shock
and fire accidents.
Please clean and maintain the entire TV set with clean and soft cotton cloths, and repeated forcible
cleanings are prohibited.
The screen may not be scribed, tapped, impacted with hard objects or rubbed with any grinding
materials.
During placement and use, the product should be kept from water droplet and splash. In case of
adverse weather e.g. thunderstorm, the power plug and cable TV (or outdoor antenna) plug shall be
rapidly pulled off to avoid damage due to lightning strike.
The TV set is a Type II equipment, and used without requiring grounding.
Attention:
Still images can result in permanent damage to TV screen.
1. The time for displaying static images on the LCD TV screen may not exceed 2 hours, otherwise it will result
in residual image on the screen. To avoid this, you need to lower the screen brightness and contrast when
displaying the still images.
2. When viewing 4:3 format program over long time, different traces will be left on the left and right sides of
the screen and the edge of margin. So the user is advised not to use such pattern over long time.
3. Long-time display of electronic games and computer static images may result in local residual image, and
the screen may get burnt and result in residual image on the screen. To avoid this, you need to lower the
screen brightness and contrast during use.
For any image residual shadow, local residual image and trace problems with the TV screen due to the
said reasons, the display screen is not within the range of warranty.
Tips for energy saving:
1. Please choose AC power off (turn off the TV through the power switch) when not viewing TV program to
minimize energy consumption.
2. Under condition that the view quality is not impacted, reduce the brightness of display screen to minimize
the energy consumption of TV during use.
Check the Symbol
Triangle enclosing a lightning arrow is a warning symbol,
reminding you of the high voltage danger in the product.
√
The correct way.
Triangle enclosing an exclamation mark is a warning symbol,
reminding you of the important notes related to the product.
×
The wrong way.
General notes.
->
Next step.
II
3D Display
Apply latest 3D process technology and new 3D display technology，giving you ultra-comfortable 3D visual
enjoyment.
Smart Operating System
3D Play
The device has 3D play function, it can provide with virtual and perfect 3D scenes, reproducing shocking presence
experiences.
2D/3D Compatible Display
Use menu to turn on or turn off 3D function, switch between 2D and 3D freely.
High Quality LED Backlight 3D Liquid Screen
New generation backlight source with the 4 cutting edges of magnificence,energy saving, environment protection
and slimness.
Built-in WiFi wireless network function
Capable to connect to wireless router directly for surfing on Internet.
Multi-screen Interaction
Capable to interconnect between TV and mobile, Hisense I'TV, meet family entertainment sharing needs.
Great Application
The device carries Himarket, provide magnitude Apps for users to download.
SRS TruSurround HD Sound Effect
Make TV audio more real and more shocking.
Multi-Mode Widescreen Display
Provide with multiple aspect ratio choice: Full Screen, Standard, Zoom1, Zoom2, Smart Zoom, Dot To Dot.
Power Saving Mode
The device will enter sleep or standby mode after there is no input signal 15 minutes later, thus extending the
device lifetime and saving power.
Multimedia Port
There are several ports for Antenna, VGA, HDMI, A/V, Component, USB, Headphone, Ethernet and TF card.
4Kx2K Ultra HD playback
The TV support 3840X2160 video playback and picture display under USB channel; support for dot to dot display
of 3840x2160 / 24Hz, 25Hz, 30Hz under HDMI channel.
is trademarks registered by SRS Labs,Inc..SRS Labs,Inc.have approved the product to apply
TruSurround HD technology.
Characteristics
Special Statement: (This statement is applicable throughout this user manual)
The pictures and instructions in the user manual are only for reference, and may be different from appearance of
actual products. Please make the object as the standard.
Any change to quality upgrade, product design and specification will not be subject to any prior notice.
User manual is only part of the application guidance instructions, and other applications can refer to the prompt
in the application instructions.
This TV incorporates High-Denition Multimedia Interface (HDMITM) technology.
HDMI, the HDMI logo and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
III
Below is the list of video format compatible:
Specifications
Model LTDN42K680HK3DU LTDN50K680HK3DU
LTDN55K680HK3DU
The level charactaristics of terminals:
Interface name Interface type Input signal Level Impedance
AV input Composite video Video 1.0Vp-p 75Ω
Component input
Analogue
component video
Y 1.0Vp-p 75Ω
PB、P
R
0.7Vp-p 75Ω
VGA Input VGA
R、G、B 0.7Vp-p 75Ω
HS、V
S
TTL High impedance
Audio input Analogue audio L、R 1Vrms ＞ 10 kΩ
NOTE
We can not promise
that this set would
support all the
formats listed above,
as the programming
tools are different.
Dimension
(W × H × D) (mm)
Without stand
945×547×49.5 1125×656.5×56.3 1235×717×59
With stand
945×598×210 1125×710×245 1235×770×285
Weight (kg)
Without stand
12.8 18 24.6
With stand
15 21.3 28.6
Active screen diagonal size
(cm)
106 126 138
Screen resolution
3840×2160 3840×2160 3840×2160
Power supply
～ 50/60Hz 160-240V ～ 50/60Hz 160-240V ～ 50/60Hz 160-240V
Power consumption
90W 130W 200W
Audio power
8W+8W 10W+10W 10W+10W
Standard
Q/0202RSR 591-2011
Receiving
systems
RF
PAL/I, DTMB
AV
PAL, NTSC
Channel range
C1 ～ C57 Z1 ～ Z35
Environmental conditions
Temperature 5℃～ 35℃ Humidity 20% ～ 80%RH Atmospheric pressure 86kPa ～ 106kPa
Antenna input
75Ω
DTV specication
Frequency: 474MHz-866MHz Transmission channel bandwidth: 8MHz Modulation：
64QAM, 16QAM, 4QAM Frame Header: Pn945 Symbol Interleaving: 720 Code Rate:
0.4, 0.6 Video decode Format: H.264, MPEG-2 Audio decode Format: MPEG-1, AC-3
Analogue Tune
VHF-L:48.25 ～ 168.25MHz VHF-H:175.25 ～ 463.25MHz UHF:471.25 ～ 863.25MHz
Component Input
480i, 480p, 576i, 576p
720p/60Hz, 1080i/50Hz, 1080i/60Hz, 1080p/50Hz, 1080p/60Hz
Formats
Video decoding
Audio decoding
Type Resolution (max) Bit rate (max)
.avi Xvid 1280×720 8Mbps AC3, MPEG1(Layer1,2,3)
.avi .mpg .ts MPEG2 1920×1080 25Mbps AC3, MPEG1(Layer1,2,3)
.ts .mkv .avi H.264 1920×1080 40Mbps
AC3, AAC,
MPEG1(Layer1,2,3)
.avi .mpg .mov MPEG4 ASP 1920×1080 8Mbps AC3, MPEG1(Layer1,2,3)
.mp4 H.264 3840×2160 40Mbps MPEG1(Layer1,2,3), AAC
.rm .rmvb Real 8/9/10 1280×720 1.5Mbps Cooker
.flv H.264 720×576 1.0Mbps MPEG1(Layer1,2,3)
IV
When it is rainy, please pull out the power plug, CATV plug or
outside antenna plug to avoid any possible damage to the TV
set. Do not touch the inducting wire of the antenna.
If you do not use the product for a long time, please pull out
the power plug.
If you find abnormal sound or smell, or there is sound but no
image, please turn off the TV and pull out the plug immediately
and contact the professional technicians.
Please do not press the power line and signal line with other
things.
Please do not make the power outlet overloaded, or it will
result in the danger of fire.
Keep the power line away from high temperature and heating
things.
There are some changes for the outdoor antenna if it stays
outside for a long time, which may affect the picture quality of
the TV, so please check the antenna or replace it regularly.
Do not clean this unit with volatile oils or dilution, which may
cause cabinet deterioration or damage its coating surface.
If the cabinet becomes dirty, please clean it with a soft cloth
which has neutral detergent wet with water.
In the case where such substances that are painted with paint
or organic solvent and grease, etc. on the surface of the TV
cabinet, the chemical reaction may be occurred in between the
rubber cushion on the base and such substances hereinbefore,
which may cause a slight corrosion on the surface of the TV
cabinet. Therefore, users are recommended to firstly put a
layer of protective material (such as pressboard or glass sheet,
etc.) on the TV cabinet and then place the TV set.
Please do not try to decompose any part of the product, which
may cause damage to the product as well as harm to the
human. And it will also make you face the product warranty
failure.
Please do not remove the back cover. The adjust and check
inside the unit should only be carried out by the professional
technicians.
Please do not cover or block the heat-radiating holes in order
not to hamper the unit to give off heat.
Please do not stick the sharp objects, metal, or liquid into or
use them to touch the signal interface or heat-radiating holes
in case of short circuit or damage to the product.
Watch TV at a proper distance, and the best distance is 3
to 4 times the length of the vertical distance of LCD.
Keep the lighting indoors bright enough to read newspaper.
The volume should be properly set in order not to disturb
your neighbors, esp. when it is during the night.
It is recommended that 2 or more people should load, unload
and carry the unit; try to avoid any crash when carrying the
unit, and protect the LCD screen in particular.
If you touch the LCD screen when turning on or off the TV,
you can feel the slight electric shock, which is the so-called
electrostatic and does no harm to your health.
√
Even and steady occasions.
× Places under direct sunshine or close to heating devices.
× Places with poor ventilation.
× Places close to furnace or places to which water, oil or smoke
is easy to enter.
× Places where ventilating openings are closed.
× Unsteady places.
× Places suffering from easy vibration.
× Places of lot of dust or moist places.
× Places of high temperatures.
LCD display panel is the advanced S&T product, composed of
several millions of Movie transistors inside. There can be dark
or bright spots appearing on the panel. please note that this
is a normal phenomenon, which does not affect the overall
performance.
The incorrect maintenance will lead to damage to the LCD screen,
which will affect the image effect, so you must pay attention to the
following items:
Don't clean the screen with the organic solvents, such as
alcohol, gasoline, etc. or chemical reagents ,such as acid,
alkali, etc.
Do not clean the screen with any kind of detergent.
After the TV is turned off, you, when necessary, can clean the
screen with a clean and soft cotton cloth to properly safeguard
it, but repeatedly cleaning with force is prohibited.
Please do not directly touch the screen with your fingers,
which may damage the screen surface. What's more, the oil
and fat on the screen is difficult to remove.
Please do not put pressure on the LCD, for the LCD screen is
delicate and vulnerable.
The hard object is not allowed to touch the LCD screen, for it
is easily scratched.
Alerts: Before using the product, please read the following clauses carefully.
Product
Watching TV
Others
Power and signal
Maintenance
LCD display instruction and maintenance
Method of placement
Important Safety Instructions
1
| Contents USER MANUAL
Contents
Getting
Started
1
Accessories List................................................................................................ 2
Installing the Stand ........................................................................................... 2
Securing the Installation Space ........................................................................ 3
Control Panel .................................................................................................... 4
Remote Control ................................................................................................ 5
Connections
8
TV Terminal ...................................................................................................... 8
Connecting an Antenna or Cable...................................................................... 9
Connecting an A/V Device ................................................................................ 9
With the HDMI Cable / With the Component Cable / With the AV Cable
Connecting a PC .............................................................................................11
Connecting a TV Monitor or VCR ....................................................................11
Connecting an Ex-Speaker............................................................................. 12
Connecting a Headphone ............................................................................... 12
Connecting a USB Device .............................................................................. 12
Connecting a TF card ..................................................................................... 13
Selecting the Input Source ............................................................................. 13
Basic
Features
14
Using the TV for the First Time ....................................................................... 14
Turning the TV On or Off / Changing the Channel and Volume
Using the Menu .............................................................................................. 14
General / Picture / Sound / 3D / Channel / Network / System / About
Advanced
Features
21
Upgrade .......................................................................................................... 21
Account........................................................................................................... 21
Using the Home Page .................................................................................... 22
Applications .................................................................................................... 22
HiMarket ......................................................................................................... 22
Multi-screen Interaction .................................................................................. 23
Cloud • Media ................................................................................................. 23
Music / Photo / Video
Other
Information
26
Trouble Shooting ............................................................................................ 26
USER MANUAL Getting Started |
2
To install the base stand
Please make sure the following items are included with your TV. If any item is missing, contact your dealer.
Getting Started
Accessories List
Installing the Stand
NOTE
Install the base stand with the provided screws in the accessory bag in case of causing damage to TV.
Appearance prevail in kind
.
User Manual×1 Warranty Card×1 3D Glasses×2 Remote Control×1 AAA Batteries × 2
Antenna Cable×1 AV Adapter×1 Comp / Video Adapter×1 Audio Adapter×1 Screws
保 修 卡
产产产产产产
Secure the stand cover to the stand
column vertically with the 2 screws
provided.
Secure the stand cover to the stand
column horizontally with the 2 screws
provided.
Secure the stand column to the base
with 4 screws (42" needs 3 screws)
provided.
M5×12
1
2
M5×12
3
ST4×14
3
| Getting Started USER MANUAL
1. Lay the soft cushion on the table which can hold enough weight of the whole TV in case of causing damage to TV
or person.
2. Put the TV on the cushion, with its back upwards and the LCD downwards.
3. To install the base stand, slide in the base stand until the screw holes are aligned. Secure the base stand to the TV
with the 4 provided screws.
To install the stand
Getting Started
M5×12
Never cover or block the heat-radiating holes.
Avoid operating the TV below 5 ℃ .
Make sure that your TV has adequate air circulation. Allow enough space around the TV as shown below.
Never install the TV set as follows:
Inadequate air circulation can lead to overheating of the TV and
may cause damage to your TV or cause re.
Leave enough space around the set.
Install with stand: Install on the wall:
Leave enough space
around the set.
Wall Wall
Air circulation is blocked.
Securing the Installation Space
USER MANUAL Getting Started |
4
Getting Started
Control Panel
Item Description
Power button
Turn on or off the TV set.
Infrared remote
control receiver
window
Receive infrared signal by remote control transmitter through the window.
Side
button
Setting
Open the setting menu.
CH+/▲
Select the previous channel/Up button.
CH-/▼
Select the next channel/Down button.
OK
Confirm button.
VOL+/►
Volume increasing/Right button.
VOL-/◄
Volume down/Left button.
HOME
Enter the television's Home page；Press the button to exit the standby
mode.
Power indicator(42"
)/
Infrared remote control
receiver window
Power indicator(50"/55"
)
NOTES
• In the home page and menu operation, you can use the arrow button to select, part of the interfaces
and applications does not support the button for the time being.
• As a result of time consumption of power down of power supply and system processing, please don't
switch on and off continuously and fast, otherwise it may cause abnormal working.
Power button
Setting
CH+/▲
CH-/▼
OK
HOME
VOL+/►
VOL-/◄
5
| Getting Started USER MANUAL
Getting Started
Remote Control
CRF6B31 is a kind of multi-functional remote controller as a keyboard, air mouse. Signal is transported via infrared
and Bluetooth two ways
Charging the battery
1. Open the battery cover on the back of the
remote control.
2. Install two AAA size (1.5V) batteries. Match
the "+" and "-" signs on the batteries to the
signs on the battery compartment.
3. Close the battery cover.
power indicator will be off.
Attention
1. If the remote control doesn't work normally,
unstable, or cannot control the TV, please
check as follows(Whether the TV is on/ the
batteries polarity is matched/replace the
batteries and so on)
2. If you do not use the remote control for a
long time, remove the batteries.
The effective range of remote control
1. The remote control distance under
Bluetooth status is 8 meters in front of the
TV set, 6 meters under Infrared status.
2. The remote control angle: taking the
television infrared light receiver window as
an apex, 6 meters away, its controlled angle
(left to right) is within 30 degrees, while
the vertical angle (up to down)is within 15
degrees.
Cute button
Return button
Exit the current menu
Home button
Enter the television's Home page
Mute button
Start/Exit the mute state
Power indicator
Numeric buttons
Select channel/Input character
▲/▼/◄/► button
Up/down/left/right button
Rewind/fast-forward button
(see "Advanced Features")
NOTE: This region for reuse button
VOL +/-button
Adjust the volume
OK button
Confirm /pause or play/sliding
screen
Display the Channel List in DTV /
ATV
CH +/- button
Select a channel
Source button
Source selecting
Audio button
Press to display the Audio
Languages menu in DTV.
Apps button
Enter App Store
Standby button
Enter standby/exit standby
EPG button
Program guide in DTV
Digital TV button
Enter digital TV
Setting button
Start/stop quick setup menu
Loading...