Hisense HWFM8012 User Manual

HWFV8012/HWFV8012S/HWFV8012T/
HWFM8012/HWFM8012S/HWFM8012T

This washing machine is equipped with automatic safety
functions which detect and diagnose at an early stage and
react appropriately.

“Start/Pause” button

A.
B.

“Options” button
“Delay End” button

C.

“Spin” button

D.
E.

“Temp.” button

Program

Cotton

--,20ºC, 30ºC, 40ºC,
60ºC, 95ºC

Cotton Eco (1)

--,20ºC, 30ºC, 40ºC,

60ºC，95ºC

Skin Care

--,20ºC, 30ºC, 40ºC

Synthetics

--,20ºC, 30ºC, 40ºC,
60ºC

Wool

--,20ºC, 30ºC, 40ºC

Shirts

--,20ºC, 30ºC, 40ºC,
60ºC

Dark Wash

--,20ºC, 30ºC, 40ºC,
60ºC

Quick 15’

--,20ºC, 30ºC, 40ºC

Mix

--,20ºC, 30ºC, 40ºC
Sportswear

--,20ºC, 30ºC, 40ºC

Duvet

--,20ºC, 30ºC, 40ºC

Silk/Delicate

--,20ºC, 30ºC, 40ºC

Drum Clean

95ºC

Rinse +Spin

Spin

Care Label

30

-Washing temperature selected as per the Care Label instruction.

Heavily and moderately soiled cotton, or linen.
For very heavily soiled items select the "Prewash" function.

Eco wash for cotton and linen.

Can reduce washing time and power consumption.

Extra rinse time. Making sure no residual detergent on textiles to protect skin form irritability.

Moderately soiled synthetics, cotton blended fabrics.

Machine washable wool. (Refer to the washing label attached to the clothing).

Non-iron shirts or blouses made of cotton, linen, synthetic fibres or blended fabrics.

Dark textiles made of cotton and dark easy-care textiles

Cotton, mixed fabrics. Items worn for a short time or newly bought.

Mixed loads of moderately soiled cotton and synthetic fabrics.

Sportswear and leisure wear made from microfibre fabrics.

Machine-washable items stuffed with synthetic fibres, such as pillows,
quilts and bedspreads; also suitable for items stuffed with down.

Soft delicate fabrics and machine washable silk. (Refer to the washing label attached to the clothing).

Program to remove dirt and bacterial residue that can breed in the machine after it has been used for
a period, especially when low temperature washes are used regularly.

This program is defaulted to two rinses and spin.

Select the length, and speed, of the spin manually.

Material / Level of Soiling

Quick User Manual

G F E AD C B

Maximum

Wash Load

kg

8.0

8.0

4.0

4.0

2.0

4.0

4.0

1.0

4.0

4.0

4.0

2.0

8.0

8.0

H I

Detergen Compartmentt

Prewash

Main wash

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Softener

Delay End

F.

Program and function status display window

G.

Program selector

H.

Child Lock Function
Mute Function

I.

Wash Program Functions

Prewash

Extra

rinse

Default

rinse
times

Spin

Temp.

2

2 1200

4

2

2

2

2

1

2

2

2

3

1

2

0

Maximum

spin speed

rpm

1200

1200

1200

600

800

1000

800

1200

1000

600

600

600

1200

1200

: Optional Functions Yes : Detergent Required : Cannot be selected -- : Temperature of unheated water

(1) Wash performance test programs are: cotton eco 40˚C, maximum speed.

PARAMETER

HWFV8012/HWFV8012S/

Model

Washing Capacity

Max.spin speed

Net Weight

Dimension(WXDXH)

Rated Voltage

Heating Power

Washing Power

HWFV8012T/HWFM8012/
HWFM8012S/HWFM8012T

8.0kg

1200rpm

60kg

595X595X850mm

220 -240V

1600W

200W

Add Detergent, Close the Door and Set the Program

Load the clothes to be washed in the drum and close the door.
Add the detergent into the relevant compartments for the type
of program you are going to select, Add detergent as described
in Detergent and Additives section of User's Operation
Manual.

1.Turn on the power.

2.Spin program selection button to required program, start up.

3.Select washing temperature, spin speed and delay time by pressing
“Temp.”, “Spin” and “ Delay End” buttons.

4.Press “Options” button to select additional functions.

5.After starting the program, display window displays program

length (hours: minutes)and additional function options in
sequence.

Addition function selection

At standby state, press “Options” button to select additional
function for current program. Select only one function for each
press, and then corresponding icon flashes. After starting up,
program cannot be changed.

Pre-wash

·Select the function to conduct pre-wash so as to enhance washing

effects and better remove stains. This function is suitable for
heavy dirt clothes.

·Before inflowing, laundry detergent/ washing powder can be

added to pre-wash box, and washing powder must be added to
main wash box.

Extra Rinse

After set the function of rinsing adding, the program runs the
rinsing process once again before running the softening, and
the total running time of the program increases accordingly.

Door Lock Icon

After the program starts the Door Lock icon will light up
and the door will be locked.

·After completing program, door lock unlocks automatically.
During pause, if door opening condition can be met halfway,
the door lock will unlock and its indicator light will go out.

·When door lock indicator light flashes, door shall not be opened
forcibly so as to avoid personal injury.

Delay End Function

Delay function allows to run the machine at the consumers’
convenience, for example, at night when electricity is cheaper.

•

Only under the standby mode, this button is valid for

selecting the reservation time.

•

After the reservation function is selected, the time will
increase 1h when each time the reservation button is pressed.
Before reservation, if the program time does not satisfy the
integral multiple of 1h, it shall be completed by pressing the
reservation key for the first time, and then the time increases
1h when each time the reservation button is pressed. If the
reservation is selected, before the program runs, the current
reservation can be canceled by turning the button to select
other programs.

•The delay time must be longer than the wash program length
as the delay time is the time program will finish. For example:
if the selected program time is 02:28, the delay time selected
must be between 03:00 and 24:00.

•

When the reservation process is operated, the icon of
‘reservation time’ will be on. When the reservation process
is finished, the icon of ‘reservation time’ will be off, while
the icon of the ‘remaining time’ will be on.

Mute Function

•

Press “Spin” and “Delay End” button simultaneously for 2

seconds, the screen will show “bEEP OFF”. The Mute state
will be set. In this state, all the beep will be disabled, except
for the error alarm.

•

Repeat the same process, Mute state will be disabled, the

screen will show “bEEP On”.

•

The Mute function will continue to take effect before you

turn it down manually.

Child Lock

To strengthen the safety of children, this machine is equipped
with Child Lock function.

•When the programme starts, press “Temp.+Spin”button
for 2 seconds. The machine will beep once. Scree will show
"SAFE On". After 2 seconds, the screen will show the
program left time. Repeat this operation, the machine will
beep once. The screen will show "SAFE OFF", the Child
Lock will be released.

•When the Child Lock is set, all function buttons except
“Off” will be shielded.Once any function except "Off" is
chosen, the machine will beep. The screen will show "
SAFE On" for 2 seconds. After the program ends, Child
lock function will release automatically. Any error alarm
will release the Child Lock function. Turn off and on the
machine manually will reset the machine.

•Child Lock function cannot be set when the machine is in
standby state.

To Start the Program

After you have selected your options and placed detergent
with in the detergent dispenser, turn on the water tap and press
the “Start / Pause” button. It also displays the remaining
program time.

To Cancel the Program or Reselect the Options

1.Rotate the program to “Off” for 3 seconds to turn off the
machine.

2.Select the new program and options.

Start / Pause” button to turn on the machine

3.Press “
adding

any extra detergent.

without

End of the Program

When programme finished its running, it will display “End”.
The machine will not turn off automatically.

1.Rotate the program to “Off” to turn off the machine;

2.Close the tap;

3.Open the door and take the washed clothes out;

4.Slightly open the door to remove moisture in the pump.

Reload in Process

If you want to reload clothes in the process of washing, please
press “Start/Pause” button.

•If the door can be opened in the process, remaining time and
the Door Lock icon in display will flash. Then the Door Lock
icon will go out, and the door can be opened.

•If the Door Lock icon doesn’t flash, it indicates that current
temperature is over 50℃ or you have passed the time for
reloading in the process, namely no clothes allowed to load
into the machine.

X08080604A

F

Instruction for use, installation guide, warranty card
(depends on model)

Wrench(depends on model)

Important: Transport bolts which are not removed can cause damage to the

appliance.

Screw off all transportation bolts for approx. 30mm with wrench following the
direction of arrow shown (not fully screw it off).

30

Push two transportation bolts on horizontal direction inward and loose
transportation bolt.

Pull out transportation bolt together with rubber part and plastic part.

To ensure safety and reduce noise, you should install the transportation bolt
cover supplied with the unit (see the annex accompanying the unit). Lean
and place the transportation bolt into hole and press it following the shown
direction until it clicks.

for models having Dual Inlets.

FILL INSTRUCTION

10

For Models with Dual Inlets

If you wish to connect hot and cold water supply (Fig.1):

1. Fix the red marked inlet hose to the hot water tap and to the inlet valve with the red

filter on the rear side of machine.

2. Fix the

other inlet hose to the cold water tap and to the inlet valve with the blue filter

on the rear side of the machine.

Make sure:

a) The connections are tightly fixed

b) Do not invert their position (for example: cold fill into hot

If you wish to connect only the cold fill follow the below instructions (Fig. 2):

inlet valve and vice versa).

1. You need a Y-piece connector. This can be purchased from local hardware or

plumbing supplier.

2. Fix the

Y-piece connector to the cold fill tap.

3. Connect the two inlet valves present on the rear part of the machine to the Y-piece
connector using the hoses provided.

For Models with Single Inlet

Fix the inlet hose to the cold water tap and to the inlet valve on the rear side of the
machine as Fig. 3

Ensure that:

All connections are tightly fixed.

Do not allow children to operate, crawl on, be near or inside your washer.

Note that during the wash cycles, the surface temperature of the porthole door

may increase.

Close supervision of children is necessary when the appliance is used near

children.

Hot fill

Red inlet valve

Blue inlet valve

Cold fill

Red inlet valve

Blue inlet valve

Cold fill

Y-piece

Inlet valve

Cold fill

Fig.1 Fig.3

Fig.2

CONNECT THE DRAIN HOSE

11

In case the drain hose is installed
as shown below:

Unhook it only from the right clip (see arrow)

12

Connect the drain hose to the siphon or
hook it over the edge of a sink by means of the
"U" bend.
Fit the “U” bend E, if not already installed, at the
end of the drain hose.

Ensure that there are no kinks in the drain hose.
Secure the hose so that it cannot fall down. After wash
phase, machine will drain out hot water.
Small hand basins are not suitable.
To make an extension use a hose of the same type and
secure the connections with clips.
Max. Overall drain hose length: 2.50 m.

adequate for the machine’s 10A Current Rating.

X08080499A

AM NOITAREPO S’RESU

LAUN

X08060287B

,ylhg

uoroht launam siht daer esaelp ,tinu siht gnitarepo erofeB

ecnerefer erutuf rof niater dna

SAFETY INFORMATION

1.

The manufacturer reserves the right for any modifications
on the product which might be deemed necessary or
useful without informing about it in this IFU.

2.

Before operating your new washing machine, please read
this instruction carefully, and keep it for future reference. If
you have lost it accidentally, ask customer service for e­copy or hard copy.

3.

Please make sure the socket is grounded securely, the
water source connection is reliable.

4. This appliance is not to be used by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.

This appliance can be used by children aged from 8

5.
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.

6.

Children should be supervised to ensure that they do not
play with the appliance.

7.

If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.

8.

The new hose-sets supplied with the appliance are to be
used and that old hose-sets should not be reused.

9.

For appliances with ventilation openings in the base, that a
carpet must not obstruct the openings.

10.

Children of less than 3 years should be kept away unless

continuously supervised.

11.

The maximum permissible inlet water pressure, 1 MPa, for

appliances intended to be connected to the water mains.
The minimum permissible inlet water pressure, 0.1 MPa, if
this is necessary for the correct operation of the appliance.

Remove all objects from pockets such as lighters and

12.

matches.

13.

The maximum washing capacity is 9 kg.
For private domestic use only.

14.

This appliance is intended to be used in household and

15.

similar applications such as:

− staff kitchen areas in shops, offices and other working
environments;

− farm houses;

− by clients in hotels, motels and other residential type
environments;

− bed and breakfast type environments;

− areas for communal use in blocks of flats or in
launderettes.

ensure

Ensure

Ensure that the ventilation openings in the base of the washing machine

(if available on your model) are not obstructed by a carpet or other material.

Single inlet ­Dual inlet -

only

and cold

21

ing

the

that

that

The symbol on the product, or on the documents accompanying the product,
indicates that this appliance may not be treated as household waste. Instead it
shall be handed over to the applicable collection point for there cyclingof electrical
and electronic equipment. Disposal must be carried out in accordance with local
environmental regulations for waste disposal. For more detailed information about
treatment, recovery and recycling of this product, please contact your local city
office, your household waste disposal service or the shop where you purchased
the product.

en

from the mains supply,

,

3

the

4

Clean the outside

of the washing machine with a damp cloth. Do not use abrasive
detergents.
Never open the door forcibly or use it as a step.

DESCRIPTION OF THE WASHING MACHINE

1

2

4

7

is

while the

for

can

for

7

Control panel layout and
appearance will depend on the model.

while the

to be

BEFORE THE FIRST

To remove any residual water u sed during testing by the manufacture r, we

recommend that you carry out a short wash cycle without laundry.

1 Open the tap.

2 Close the door.

3 Pour a little detergent (about 30 ml) into the main wash chamber of the deter-

1

2

4

gent dispenser .

4. Select and start a short programme (see separate quick reference guide).

WASH CYCLE

PREPARATION OF THE WASHING

1. Sort the laundry according to...
Type of fabric / care label symbol

Cottons, mixed fibres, easy care/synthetics, wool, handwash items.

The wool wash

Woolmark Company for the washing of Woolmark garments labelled as “machine

wash” provided that the garments are washed according to the instructions on the

is

garment label and those issued by the manufacturer of this washing machine.

Colour

Separate coloured and white items. Wash new coloured articles separately.

Loading

W

items

ash

distribution in the drum.

Delicates

Wash small

in a cloth bag or pillow case with zip. Always remove curtain rings or wash curtains

with the rings inside a cotton bag.

2. Empty all pockets

Coins, safety pins etc. can damage your laundry as well as the appliance drum and

tub.

3. Fasteners

Close zips and fasten buttons or hooks; loose belts or ribbons should be tied

together.

Stain removal

Blood, milk, eggs

programme.

cycle of this machine has been tested and approved by The

of different sizes in the same load to improve washing efficiency and

items (e.g. nylon stockings, belts etc.) and items with hooks (e.g. bras)

etc. are generally removed by the automatic enzyme phase of the

5

6

.

/ soak

U

7 8

unds

2

Depending on the model, Insert removal tool like
slotted screwdriver into the small opening of
bottom baffle, press the bottom baffle downward
with much strength and open it. Or, push down on
the tabs provided on both the sides and remove it.

9 1

0

fit

fit

11 12

solv

no screen are off.

and Choose the desired

programmme to start the machine.

The washing machine will not start, and the screen flashes.

Check if the water tap is closed.

the screen is flashing. Press the

the screen is flashing.

remove some

too

13 14

Hot / Cold fill fault - For Models with Dual Inlets

Fault Code List

If you wish to connect hot and cold water supply (Fig.1):

1. Fix the red marked inlet hose to the hot water tap and to the inlet valve with the red
filter on the rear side of machine.

2. Fix the other inlet hose to the cold water tap and to the inlet valve with the blue filter
on the rear side of the machine.

Make sure:

a) The connections are tightly fixed
b) Do not invert their position (for example: cold fill into hot inlet valve and vice versa).

If you wish to connect only the cold fill follow the below instructions (Fig. 2):

1. You will need a Y-piece connector. This can be purchased from local hardware or plumb
ing supplier.

2. Fix the Y-piece connector to the cold fill tap.

3. Connect the two inlet valves present on the rear part of the machine to the Y-piece
connector using the hoses provided.

Ensure that:

All connections are tightly fixed.

Do not allow children to operate, crawl on, be near or inside your washer.
Note that during the wash cycles, the surface temperature of the porthole door may
increase.
Close supervision of children is necessary when the appliance is used near children.

Displayed on Display Window Fault Description

“F01” Water inflow fault

“F03” Drainage fault

“F04”, “F05”, “F06”, “F07”，“F23” and “F02/F24”

“F13”

“F14” Door unlock fault

“Unb”

Electronic module fault, overflow or too much foam.

Door lock fault

Unbalance alarm

a. “F01” displayed on screen

The machine is not fed with water or insufficient water. Check:

• Faucet is fully open and has enough water pressure.

• Water inlet pipe is knotted or not.

• Filtering net of water inlet pipe is blocked or not (refer to maintenance and
repair).

• Water pipe is frozen or not.
Press “Start/Pause” key after fault is removed.
If fault occurs again, please contact with after-sale service (refer to after-sale
service.).

Hot fill

Cold fill

Cold fill

Y-piece

b. “F03” displayed on screen

The washer is not emptied. The washer stops the program being executed. Shut
down the machine and disconnect power supply. Check:

• Drain pipe is knotted or not.

Red inlet valve

Blue inlet valve

Fig.1

Red inlet valve

Blue inlet valve

Fig.2

• Filter in drain pump is blocked or not (refer to the cleaning of filter in drain pump)

Ensure that

15 16

C. Fault code

The washer stops when the program is running. The display window
shows fault code “F02/F24”, fault codes from “F04’ to “F07”, “F13”,“F14”,
“F23” or “Unb”.

If fault code “F02/F24” is shown

Water level reaches overflow level.

Remove it by pressing “Start/Pause” key and feed water.

Select and start required program. If fault occurs again, disconnect power supply
and contact with after-sale service.

If fault code “F04” to “F07”, “F23” shown

Electronic module fails.

Turn the nub to Off for 3 seconds to turn off the machine.
After fault is removed, press “Start/Pause” key. If fault occurs again, disconnect
power supply and contact with after-sale service.

If fault code “F13” is shown

Door lock is abnormal. Start program for 20 sec and unlock the washer door
(PTC) to check whether the door is closed.

Open and close it again.

After fault is removed, press “Start/Pause” key. If fault occurs again, disconnect
power supply and contact with after-sale service.

If fault code “F14” is shown

Door open fault..

Action: Press “Start/Pause” button. The washing machine will try to open the door.
The alarm will be removed until the door is unlocked. Or, turn the nub to Off for 3
seconds to turn off the machine. Choose the desired programmme to start the
machine. The alarm will be removed.

If fault code “Unb” is shown

Unbalance alarm.

Turn the nub to Off for 3 seconds to turn off the machine. Open the door and
re-tidy clothes and then rotate program knob to single dehydration mode. Spin
clothes to dry again.

If fault occurs again, disconnect power supply and contact with after-sale service.

adequate for the machine’s 10 A Current Rating.

The electrical power cable must be replaced exclusively by a licensed electrician.

17 18