Hip Street Kidz Cam Instruction Manual
Thank you for purchasing a Hip Street product and we hope you enjoy using it.
Please visit our website at
Preface
Kindly read and retain all the operating instructions before operating the unit. We
cannot assume any liability that may arise out of improper operation or
incidental/accidental damages. The contents of this user manual are subject to
change based on newer developments.
Note:
Do not use the unit in places that are extremely hot, cold, dusty, or humid.
The battery life will differ with different usage conditions and modes.
Do not disconnect the product while it is formatting or uploading/downloading.
Do not disassemble. Please contact our support center if you need service at
support@hipstreetonline.com.
Specifications are subject to change and improvement without notice.
www.hipstreetonline.com.
1
Avoid water or foreign objects falling on this product.
The display screen pictures contained in this Guide are used only for indication
purpose. Real display pictures may be different.
Product package contents
Digital Camera
CD Driver
User’s Manual
USB cable
System Requirements
Win98/ME/2000/XP/Vista
125MB free hard disk space or higher, 64MB or more ROM.
Color Monitor (Suggest at least 800x600, 24 bit or higher)
Available USB interface and CD-ROM
Automatically Enter the Energy Saving Mode
In order to save battery energy, the camera will automatically enter the energy
saving mode when the camera is not in use for 30 seconds.
Software Installation
2
Note:
If your computer system is running Windows 98, you must install the driver
software. Go to E:/Win/DIRECTX 8.1b REDIST PACKAGE>EXE (E: is CD drive in “My
Computer”).
Getting To Know Your Digital Camera
3
Shutter
LCD
Lens
Viewfinder
USB socket
Hanging Strap Loop
Start/Function Key
Indicator light for taking photos
Battery compartment
Photo Mode
Press the function button to turn on the camera and “Hi” will show on LCD screen.
The camera will beep once indicating the camera is turned on.
Select required mode to take photos. (Please refer to the details of Camera
Function Operation).
Hold the camera steadily and press the shutter button to take photos.
The buzzer beeps once when the photo has been taken.
The LCD will show “0” when the memory is full and further photos cannot be taken.
4
Shooting Images
Please hold the camera steady when taking photos.
The quality of light will affect the picture quality.
Camera Functions Control
LCD Diagram Directions
Press the select button to select the functions on the digital camera. The function
diagram will show on the LCD display:
Power off the camera
Auto shoot
5
Continuous shoot
Take three photos continuously
Delete all photos in the memory
Delete the last photo
“Hi” means to change to CIF mode
“Lo” means to change to QCIF mode
“Hd” or “LD” is the photo compression ratio selection. “Hd” means to change to
high compression and “Ld” means change to low compression. Higher compression
ratio means you may store more photos.
Camera Function Control
Turn on the camera
Press the Function button to turn the camera on.
Turn off the camera
Press the Function button to select “off” shown on the LCD display.
Press the Shutter button within 5 seconds to turn off the camera.
Auto-Shoot Timer Mode
1.) Press the Function button to select “
2.) Press the Shutter button within 5 seconds to activate the 10 second timer. The
digital camera will beep once every second.
3.) After 10 seconds, the camera will beep once to indicate that the photo has been
taken.
“ shown on the LCD display.
6
AVI Mode
1.) Press the Function button to select “
2.) Press the Shutter button within 5 seconds to activate the continuous shooting
mode and do not release the shutter button until you want to stop shooting. The
camera will beep once for each photo taken till the shutter button is released and
the memory is full.
3.) Under the continuous shooting mode, the photos are taken in QCIF mode and
saved as a video format.
4.) Under the continuous mode, the photo shooting may fail due to poor lighting.
Note:
The photos taken by continuous mode will be saved as AVI format in the appointed
place. You may open it directly with the photo download software.
Delete All Photos
1.) Press the function button to select the “
“ shown on the LCD display.
“ icon shown on the LCD display.
2.) Press the shutter button and the photo counter will flash. Press the shutter
button again within 5 seconds and it will delete all the photos stored in the
memory.
Delete Single Photo
1.) Press the function button to select the “
2.) Press the shutter button once within 5 seconds to delete the last photo taken.
7
“ icon shown on the LCD display.
Loading...