Hip Street HS-U01 User Manual

Instruction Manual

HS-U01

MP3 Player

Thank you for your purchase of this Hip Street MP3 player and we hope you enjoy using it.

Please visit our website at www.hipstreetonline.com

Please ensure that you fully read and understand the information with this instruction manual

prior to using your product. It is advised that you keep this instruction manual in a safe place

for future reference. We sincerely hope that this high quality product offers you endless hours

of entertainment.

Important safety precautions

• Always follow these basic safety precautions when using your player. This will reduce

the risk of product damage and personal injury.

• Do not disassemble, repair or modify the player by yourself. Refer servicing to

qualified personnel.

• Do not dispose of the player in fire to avoid explosion.

• Keep the player away from direct sunlight or heat source.

• Do not expose the unit to rain or moisture to avoid any malfunction.

• Do not use the player in a rather dry environment to avoid static.

• Never apply heavy impact on the player like dropping it or placing it on a magnet.

• Clean only with a dry cloth. Make sure the player is turned off before cleaning. Do not

use liquid cleanser.

• Be sure to back up your files. We will not be liable for the loss of data due to improper

operation, repair or other causes.

Precautions in using the earphones

• Do not use the player with earphones while driving an automobile or riding a bicycle.

• To avoid an accident, do not turn up the volume of the earphones too high while

walking.

• It’s not recommended that you use the earphones at a high volume for an extended

time as this may cause hearing damage.

.

Features

• 2GB memory capacity

• Sleek MP3 / WMA Player

• Works as a memory storage device (USB flash drive)

Diagram

1. USB cap

2. Play/Pause button; press and hold to Power On/Off

3. Next / Volume increase

4. Previous / Volume decrease

5. RESET button

6. Lanyard loop hole

7. Earphone jack

8. Indicator light

Connecting with the Computer

System requirements

Your computer system must meet the following specifications:

• Pentium 200MHz or above

• Microsoft Windows 2000/ME/XP/Vista, Mac OS 10.3+

• 120MB of available hard disk space

• USB port supported

Connecting the player to computer

Before connecting the player, make sure your computer is powered on.

1. Insert the USB cable provided into the player and computer.

2. For Windows, the computer system detects “New hardware” and starts to install the driver

automatically. Wait for the system to finish the installation. When it has finished, a new

“Removable Disk” will be created in “My Computer”. For Mac, the computer will detect the

player as a “NO Name” drive.

Loading files to the player

To download the files from your computer, perform the following steps.

1. Open Windows Explorer or My computer. “Removable Disk” will be displayed.

2. Select the files on your computer and simply move it into the “Removable Disk” in the

usual way (drag-and-drop or copy-and-paste). After copying is completed, the data will

be available on the MP3 player.

Note:

• Do not disconnect the player during loading. It may cause malfunction of the player

and the files.

Disconnecting the player

After completing the file transfer, safely disconnect the MP3 player.

1. Double click the green arrow “Safety Remove Hardware” in the taskbar on the bottom

right of the window.

2. Select “USB Device” and click “Stop”.

3. When the “Stop a Hardware device” appears, click “OK” to disconnect the USB mass

storage device. Then you can unplug the player safely.

Mass Storage

The MP3 player can be used to store any type of file as a USB flash drive. It can, for example,

be used to simply transfer files from one computer to another or as a back-up device.

Charging the battery

The battery of the player is charged automatically when the player is connected to the

computer. Ensure the computer is turned on.

The battery of the player is 80% charged in about one hour and fully charged in about two

hours. If you charge the player while loading files to the player, it may take longer.

During charging, the indicator flashes slowly. When the player is fully charged, the indicator will

stop flashing and illuminate permanently.

Power on/off the player

Press and hold the Play/Pause button to turn on and off the unit.

If there is no music on the player when turned on, the indicator light will flash quickly.