Hip Street HS-M191 User Manual
Instruction Manual
HS-M191
MP4 Player
Thank you for your purchase of this Hip Street MP4 player and we hope you enjoy using it.
Please visit our website at www.hipstreetonline.com
Please ensure that you fully read and understand the information with this instruction manual
prior to using your product. It is advised that you keep this instruction manual in a safe place
for future reference. We sincerely hope that this high quality product offers you endless hours
of entertainment.
Important safety precautions
• Always follow these basic safety precautions when using your player. This will reduce
the risk of product damage and personal injury.
• Do not disassemble, repair or modify the player by yourself. Refer servicing to
qualified personnel.
• Do not dispose of the player in fire to avoid explosion.
• Keep the player away from direct sunlight or heat source.
• Do not expose the unit to rain or moisture to avoid any malfunction.
• Do not use the player in a rather dry environment to avoid static.
• Never apply heavy impact on the player like dropping it or placing it on a magnet.
• Clean only with a dry cloth. Make sure the player is turned off before cleaning. Do not
use liquid cleanser.
• Be sure to back up your files. We will not be liable for the loss of data due to improper
operation, repair or other causes.
Precautions in using the earphones
• Do not use the player with earphones while driving an automobile or riding a bicycle.
• To avoid an accident, do not turn up the volume of the earphones too high while
walking.
• It’s not recommended that you use the earphones at a high volume for an extended
time as this may cause hearing damage.
.
7
Features
4
1
• 2GB memory capacity
• Sleek MP4 / MP3 / WMA /WAV Player
• Video / Music / Photos
• Built-in Re-Chargeable battery
• 1.5” LCD Display
• Works as a memory storage device (USB flash drive)
Diagram
2
6
8
1. ON/OFF button
2. Play/Pause/ press and hold for power on/power off
3. Menu / Enter / access setup menu and confirmation
4. Next track/next song/fast forward/volume up
5. Previous track/previous song/fast backward/volume down
6. Volume
7. Earphones jack
8. USB port
Connecting with the Computer
System requirements
Your computer system must meet the following specifications:
• Pentium III or above
• Microsoft Windows 2000/ME/XP/Vista
• 120MB of available hard disk space
• USB port supported
Connecting the player to computer
Before connecting the player, make sure your computer is powered on.
1. Insert the USB cable provided into the player and computer.
2. For Windows, the computer system detects “New hardware” and starts to install the driver
automatically. Wait for the system to finish the installation. When it has finished, a new
“Removable Disk” will be created in “My Computer”.
Loading files to the player
To download the MP3 , Video or Photo files from your computer, perform the following steps.
NOTE: Video files must be converted using supplied convertor software before they can be
downloaded onto the player.
1. Open Windows Explorer or My computer. “Removable Disk” will be displayed.
2. Select the files on your computer and simply move it into the “Removable Disk” in the
usual way (drag-and-drop or copy-and-paste). After copying is completed, the data will
be available on the MP4 player.
Note:
• Do not disconnect the player during loading. It may cause malfunction of the player
and the files may not copy correctly.
Disconnecting the player
After completing the file transfer, safely disconnect the MP3 player.
1. Double click the green arrow “Safety Remove Hardware” in the taskbar on the bottom
right of the window.
2. Select “USB Device” and click “Stop”.
3. When the “Stop a Hardware device” appears, click “OK” to disconnect the USB mass
storage device. Then you can unplug the player safely.
Mass Storage
The MP4 player can be used to store any type of file as a USB flash drive. It can, for example,
be used to simply transfer files from one computer to another or as a back-up device.
Charging the battery
The battery of the player is charged automatically when the player is connected to the
computer. Ensure the computer is turned on. The battery of the player is 80% charged in about
one hour and fully charged in about two hours. If you charge the player while loading files to
the player, it may take longer time to charge. While charging, the indicator flashes slowly.
When the player is fully charged, the icon on the screen will be green in colour.
Button Definitions:
On-power on, Off-power off
►- Press and hold to turn power ON / OFF, Press once to pause.
M – Press once to select, Press and hold to get back to the main menu (Does not work when
music is playing)
- Press once for previous track/previous song/volume down. Press and hold to Reverse.
- Press once for next track/next song/volume up. Press and hold to fast forward.
Name of the
music file
VOL - Volume select.
• How to use keys
There are two ways:
Press Once: Press and release at once
Press and Hold: Press and hold for about 2 seconds, then release.
Screen:
Repeat playing
A-B repeat
Music
Total time of the music
Main Functions:
Using the Menu
Press and hold/Press once “M” to enter into/exit all the main menus and submenus;
Press once “VOL” to exiting submenus directly.
Display Preview
Main menu will display the following screens as shown below:
Battery Capacity
Playing time
Volume
EQ
" "
Music Video Photo Navigation
E-book Record Setting
"
"
• Power On/Off
Slide ON/OFF button to ON; press and hold “►” to turn on the player.
• Play/Pause
In music mode, press “►” once to play/pause your music.
• Adjusting Volume
When in play mode, press “VOL”; The ‘VOL’ indicator starts flashing; press 惇” to increase or
press 惇” to decrease the volume.
• Music Mode:
Music play interface:
"
• Please follow the steps below to play your music:
Turn the player ON. Press and Hold “►” to turn the player ON. Press 惇M敦 to enter into music
play interface, then press “►” to start playing your music.
Selecting a song: Press 惇敦 once to go to the next song, Press 惇敦 once to go to the previous
song.
Adjusting the Volume: Press 惇VOL敦 once; Press 惇敦 to increase; Press 惇敦 to decrease.
• Displaying the name of the song and lyrics
This machine can support “*.LRC” format files that display lyrics.
In order to display the lyrics of a song, the filename of the lyric file should be the same as the
name of the song.
For example:
If the name of the song is: Let it be.mp3
Then the lyrics filename should be: Let it be.lrc
Basically the file name needs to be the same and the file extensions would be different. If the
player detects that there is an .lrc file in the same folder as the .mp3 file that is playing, it will
automatically display the lyrics.
• A-B repeat
1. When playing your music, press 惇VOL敦. The ‘VOL’ on the screen starts flashing. Press 惇M敦
once and you’ll see ‘A—‘ flash briefly at the top left corner of the screen.
2. Press 惇M敦 once more to select end point ‘B’, and the screen at the top left corner will flash
‘A—B’ and start to play the selected part.
3. Press “M” once to exit the A-B mode.
••••""""
Video Mode
""""
This player supports AVI format video. You may follow the same steps to playing a
video file as that of a music file.
•••• Delete Files:
""""
In this Navigation menu, you may delete files as explained below
Press ‘M’ once to get to the sub-menu.
Press 惇/敦 once to select the file to be deleted, Press “M” once and you will be
asked to confirm deletion. Press “/” to select “Yes” or ‘No’ and then Press “M” to
confirm your action
If your player is connected to your PC, you should delete the files on your PC
st
1
and then move them to your player.
•••• Recording Mode
1. Start at the main menu of record mode
2. Press “M” once to enter the recording sub-menu.
3. Press “►” once to start or pause recording.
4. Press “M” once to save the recorded file and exit recording menu.
The recorded files will be saved in the ‘Voice’ submenu automatically.
If there is not enough space for saving the recorded files, the screen will
display “No Space”. You must delete some files to create space.
If the number of saved files reaches the maximum capacity, the screen will
display “Directory full”. You would need to delete some files to create space.
When recording, the buttons “/” “VOL” have no function.
••••Recording Settings
1. Enter into the ‘Setting’ menu.
2. Press 惇M” once to enter the setting sub-menu.
3. Press惇 敦or惇敦 once to select 惇Record”.
4. Press “M” once to enter into ‘Record’ submenu, then press “M” once to enter
into “REC Quality”, Press “M” once again for the third time to display 2 options
“High Quality” & “General Quality”.
“High Quality”: Selecting this option will result in your files being recorded in
64KBPS in ‘.WAV’.
“General Quality”: Selecting this option will result in your files being recorded in
32KBPS .WAV.
•••• Playing your recordings
Record file
1. Start from the “Navigation” menu.
2. Press “M” once to enter into submenu.
3. Make sure the ‘Voice’ folder is highlighted and press “►” once to open the
‘Voice’ folder. Then press 惇敦 or 惇敦 to select desired file and then press “►” to
start playing your record files.
4. Press and hold 惇M” to exit to the main menu.
•••• Browsing Photos
1. Navigate to the “Photo” screen.
2. Press “M” once to enter into the sub-menu and view the photo file list. [If no
photos are on the player, the list will be empty.]
3. Press “/” to select previous or next photo; Press “►” to play, Press 惇M”
once to return to photo file list; Press and hold 惇M” to return to the main
menu.
4. Deleting photos
Press 惇敦 or 惇敦 to highlight a photo in the file list. Press 惇M敦 to delete the
highlighted file. You will now be asked to confirm if you would like to delete
the highlighted file. Use the 惇敦 or 惇敦 button to move between ‘Yes’ and ‘No’.
Press ‘M’ to confirm your choice.
••••E-book (Text)
Loading...