Hilti SID 14-A, SID 18-A, SIW 18-A, SIW 14-A Original Operating Instructions
SID 14A
SID 18A
SIW 14A
SIW 18A
Original operating instructions en
Mode d'emploi original fr
Manual de instrucciones original es
Printed: 16.06.2015 | Doc-Nr: PUB / 5070695 / 000 / 03
1
Printed: 16.06.2015 | Doc-Nr: PUB / 5070695 / 000 / 03
2
3
4
5
Printed: 16.06.2015 | Doc-Nr: PUB / 5070695 / 000 / 03
6
7
8
9
Printed: 16.06.2015 | Doc-Nr: PUB / 5070695 / 000 / 03
10
Printed: 16.06.2015 | Doc-Nr: PUB / 5070695 / 000 / 03
1
1 Information about the documentation
1.1 Conventions
1.1.1 Warning signs
The following warning signs are used:
General warning
1.1.2 Symbols
The following symbols are used:
Read the operating instructions before use.
Instructions for use and other useful information
Rated speed under no load
Revolutions per minute
Direct current (DC)
1.1.3 Typographic emphasis
The following typographic features are used to emphasize important passages in the technical documentation about your impact screwdriver/wrench:
1
These numbers refer to the corresponding illustrations.
1.2 Operating instructions
▶ It is essential that the operating instructions are read before initial
operation.
▶ Always keep these operating instructions together with the tool.
▶ Ensure that the operating instructions are with the tool when it is
given to other persons.
Changes and errors excepted.
1.3 Product information
The type designation can be found on the type identification plate at the
base of the tool and the serial number on the side of the casing.
▶ Make a note of this data in the following table and always refer to it when
making an enquiry to your Hilti representative or Hilti Service Center.
Product information
Type:
Generation: 01
Serial no.:
Printed: 16.06.2015 | Doc-Nr: PUB / 5070695 / 000 / 03
2
2 Safety
2.1 Warnings
The purpose of warnings
Warnings alert persons to hazards that occur when handling or using the
product.
Description of the key words used
DANGER
Draws attention to imminent danger that will lead to serious personal
injury or fatality.
WARNING
Draws attention to a potentially dangerous situation that could lead to
serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation that could lead to
slight personal injury or damage to the equipment or other property.
2.2 Safety instructions
The safety rules given in the following section contain all general safety rules
for electric tools which, in accordance with the applicable standards, require
to be listed in the operating instructions. Accordingly, some of the rules
listed may not be relevant to this electric tool.
2.2.1 General power tool safety warnings
WARNING
Read all safety warnings and all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
Work area safety
▶ Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
▶ Do not operate power tools in explosive atmospheres, such as in
thepresenceofflammableliquids,gasesordust.Power tools create
sparks which may ignite the dust or fumes.
▶ Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
Electrical safety
▶ Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will reduce risk of electric
shock.
Printed: 16.06.2015 | Doc-Nr: PUB / 5070695 / 000 / 03
Loading...