Hilti SI-AT-A22 User Manual

SIATA22

English

Printed: 20.12.2017 | Doc-Nr: PUB / 5331855 / 000 / 04

Printed: 20.12.2017 | Doc-Nr: PUB / 5331855 / 000 / 04

English 1

1 Information about the documentation

1.1 About this documentation

• Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free
handling and use of the product.

• Observe the safety instructions and warnings in this documentation and on the product.

• Always keep the operating instructions with the product and make sure that the operating instructions
are with the product when it is given to other persons.

1.2 Explanation of symbols

1.2.1 Warnings

Warnings alert you to hazards that can occur when you are handling or using the product. The following
signal words are used in combination with a symbol:

DANGER! Draws attention to imminent danger leading to serious injury or fatality.

WARNING! Draws attention to a potential threat of danger that can lead to serious injury or

fatality.

CAUTION! Draws attention to a potentially dangerous situation that can lead to minor injury or
damage to the equipment or other property

1.2.2 Symbols in the documentation

The following symbols are used in this document:

Read the operating instructions before use

Instructions for use and other useful information

Dealing with recyclable materials

Do not dispose of electric equipment as household waste

1.2.3 Symbols in the illustrations

The following symbols are used in illustrations:

These numbers refer to the corresponding illustrations found at the beginning of these operating
instructions

The numbering reflects the sequence of operations shown in the illustrations and may deviate
from the steps described in the text

Item reference numbers are used in the overview illustrations and refer to the numbers used in
the product overview section

This symbol is intended to draw special attention to certain points when handling the product.

Wireless data transfer

1.3 Product-dependent symbols

1.3.1 Symbols on the product

The following symbols are used on the product:

Direct current (DC)

1.4 Product information

Hilti products are designed for professional use and may be operated, serviced and maintained only by

trained, authorized personnel. This personnel must be informed of any particular hazards that may be

Printed: 20.12.2017 | Doc-Nr: PUB / 5331855 / 000 / 04

2 English

encountered. The product and its ancillary equipment can present hazards if used incorrectly by untrained
personnel or if used not in accordance with the intended use.

The type designation and serial number are stated on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when

contacting Hilti Service or your local Hilti organization to inquire about the product.

Product information

Type SIATA22

Generation 01

Serial no.

2 Safety

2.1 Safety precautions

▶ Observe the safety precautions in the operating instructions for the wrench.

Printed: 20.12.2017 | Doc-Nr: PUB / 5331855 / 000 / 04

English 3

Printed: 20.12.2017 | Doc-Nr: PUB / 5331855 / 000 / 04

4 English

Printed: 20.12.2017 | Doc-Nr: PUB / 5331855 / 000 / 04

English 5

3 Description

3.1 Adaptive torque module

Printed: 20.12.2017 | Doc-Nr: PUB / 5331855 / 000 / 04