Hilti SFH151-A, SF151-A User Manual

SF 151-A /
SFH 151-A

*227959*

227959

Bedienungsanleitung de
Operating instructions en
Mode d’emploi fr
Manual de instrucciones es
Istruzioni d’uso it
Gebruiksaanwijzing nl
Brugsanvisning da
Bruksanvisning sv
Bruksanvisning no
Käyttöohje fi
Manual de instruções pt

Οδηγιες χρησεως

el
Kasutusjuhend et
Lietoßanas pamåcîba lv
Instrukcija lt
Инструкция по зксплуатации ru

00_Cover_SF151_A_P1.qxd 15.9.2005 08:35 Seite 3

1234567

8

9

+≠

1

00_Cover_SF151_A_P1.qxd 15.9.2005 08:35 Seite 4

2

3

4 5

6

00_Cover_SF151_A_P1.qxd 15.9.2005 08:35 Seite 6

1

2

1

L

STOP

R

3

1

2
1

2

321

1

3

SF 151-A / SFH 151-A cordless drill/driver or
cordless hammer drill/driver

It is essential that the operating instructions
are read before the tool is operated for the
first time.

Always keep these operating instructions
together with the tool.

Ensure that the operating instructions are
with the tool when it is given to other
persons.

Contents Page

1. General information 13

2. Description 14

3. Insert tools, accessories 15

4. Technical data 15

5. Safety rules 16

6. Before use 19

7. Operation 19

8. Care and maintenance 21

9. Troubleshooting 22

10. Disposal 22

11. Warranty 23

12. EC declaration of conformity 23

1. General information

Operating controls and parts 1

Quick-release chuck

@

Torque and operating mode setting ring

;

Side handle

=

Control switch (with electronic speed control)

%

Forward / reverse switch

&

Motor brake

(

Two- or three-speed gear selector switch

)

Type plate

+

Grip

§

Battery release button (2 buttons)

/

en

1.1 Safety notices and their meaning

WARNING

Draws attention to a potentially dangerous situation
that could lead to serious personal injury or fatality.

CAUTION

Draws attention to a potentially dangerous situation
that could lead to slight personal injury or damage to
the equipment or other property.

NOTE

Draws attention to instructions and other useful in­formation.

13

1.2 Explanation of the pictograms and other
information

Warning signs

en

General
warning

Warning:
electricity

Warning: hot

surface

Obligation signs

Warning:

caustic

substances

Nominal speed

under no load

Revolutions

per minute

Hammer

drilling

Drilling
without

hammering

1 These numbers refer to the corresponding illustra­tions. The illustrations can be found on the fold-out
cover pages. Keep these pages open while studying
the operating instructions.
In these operating instructions, the SF 151‑Acordless
drill/driver or SFH 151‑A cordless hammer drill/driver
withbatteryfitted,arereferredtoas“thetool”.

Wear eye

protection.

Wear

breathing

protection.

Wear a hard

hat.

Wear ear

protection.

Wear

protective

gloves.

Symbols

Read the

operating

instructions

before use.

Return waste

material for

recycling.

Volts Direct current

2. Description

2.1 Use of the product as directed

The SF 151-A is a hand-held, cordless drill/driver for
driving and removing screws and for drilling in steel,
wood and masonry.
The SFH 151-A is a hand-held, cordless hammer
drill/driver for driving and removing screws, for
drilling in steel, wood and masonry and for ham­mer drilling in concrete and masonry.
Working on materials hazardous to the health (e.g.
asbestos) is not permissible.
Do not use the battery as a power source for other
unspecified appliances.
Changes or modifications to the tool are not permiss­ible.

Location of identification data on the tool

The type designation can be found on the type plate
and the serial number on the side of the motor
housing. Make a note of this data in your operating
instructions and always refer to it when making an
enquiry to your Hilti representative or service depart­ment.

Type :

Serial no.:

To avoid the risk of injury, use only genuine Hilti
accessories and insert tools.
Observe the information printed in the operating in­structions concerning operation, care and mainten­ance.
The tool is designed for professional use and may
be operated, serviced and maintained by trained, au­thorized personnel. This personnel must be informed
of any special hazards that may be encountered. The
tool and its ancillary equipment may present haz­ards when used incorrectly by untrained personnel or
when used not as directed.

14