Hilti SF181-A, SFH181-A User Manual
00_Cover_SF181_A_P1.qxd 9.5.2006 14:44 Uhr Seite 3
SF 181-A /
SFH 181-A
Bedienungsanleitung de
Operating instructions en
Mode d’emploi fr
Manual de instrucciones es
Istruzioni d’uso it
Gebruiksaanwijzing nl
Brugsanvisning da
Bruksanvisning no
Bruksanvisning sv
Käyttöohje fi
Manual de instruções pt
Οδηγιες χρησεως
Lietoßanas pamåcîba lv
Instrukcija lt
Kasutusjuhend et
el
272635
1234567
8
9
+≠
00_Cover_SF181_A_P1.qxd 9.5.2006 14:44 Uhr Seite 4
1
00_Cover_SF181_A_P1.qxd 9.5.2006 14:44 Uhr Seite 6
2
1
2
1
3
L
STOP
4 5
R
3
1
2
1
6
2
321
1
3
SF(H)181‑A cordless drill/driver / cordless hammer drill/driver
It is essential that the operating instructions
are read before the power tool is operated
for the first time.
Always keep these operating instructions
together with the power tool.
Ensure that the operating instructions are
with the power tool when it is given to other
persons.
Contents Page
1. General information 13
2. Description 14
3. Insert tools, accessories 15
4. Technical data 16
5. Safety rules 17
6. Before use 19
7. Operation 20
8. Care and maintenance 21
9. Troubleshooting 22
10. Disposal 23
11. Manufacturer’s warranty - tools 23
12. EC declaration of conformity 24
1. General information
Operating controls and parts 1
Quick-release chuck
@
Torque and operating mode setting ring
;
Side handle
=
Control switch (with electronic speed control)
%
Forward / reverse switch
&
Motor brake
(
Two- or three-speed gear selector switch
)
Type identification plate
+
Grip
§
Battery release button (2 buttons)
/
en
1.1 Safety notices and their meaning
WARNING
Draws attention to a potentially dangerous situation
that could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation
that could lead to slight personal injury or damage to
the equipment or other property.
13
NOTE
Used to draw attention to an instruction or other
useful information.
1.2 Explanation of the pictograms and other
information
Warning signs
en
General
warning
Warning:
electricity
Warning:
caustic
substances
Obligation signs
Wear eye
protection
Wear a hard
hat
Wear ear
protection
Wear
protective
gloves
Rated speed
under no load
Revolutions
per minute
Hammer
drilling
Drilling
without
hammering
1 These numbers refer to the corresponding illustrations. The illustrations can be found on the fold-out
cover pages. Keep these pages open while studying
the operating instructions.
In these operating instructions, the designation
“power tool” refers to the SF 181‑Acordless
drill/driver or SFH 181‑A cordless hammer
drill/driver.
Location of identification data on the power tool
The type designation can be found on the type identification plate and the serial number on the side of
the motor housing. Make a note of this data in your
operating instructions and always refer to it when
making an enquiry to your Hilti representative or
service department.
Type:
Wear
breathing
protection
Symbols
Read the
operating
instructions
before use.
Return waste
material for
recycling.
Volts Direct current
2. Description
2.1 Use of the product as directed
The SF 181-A is a hand-held, cordless drill/driver for
driving and removing screws and for drilling in steel,
wood and masonry.
The SFH 181-A is a hand-held, cordless hammer
drill/driver for driving and removing screws, for
drilling in steel, wood and masonry and for hammer drilling in lightweight concrete and masonry.
Working on materials hazardous to the health (e.g.
asbestos) is not permissible.
14
Serial no.:
Do not use the battery as a power source for other
unspecified appliances.
Modification of the power tool is not permissible.
To avoid the risk of injury, use only genuine Hilti
accessories and insert tools.
Observe the information printed in the operating instructions concerning operation, care and maintenance.
The power tool is designed for professional use and
may be operated, serviced and maintained only by
Loading...