Hilti CF 116 INSTALLATION

Construction Chemicals - Foam & Adhesive Products

7.2.1

CF 116 Filler Foam

Shelf Life

CF 116 has a shelf life of 9 months from the date of manufacture when stored at temperatures of 41°F to 77°F.

Limitations - Not recommended for . . .

• Direct exposure to sunlight because it will cause discoloration and deterioration of the exposed surface .Such effects can be prevented b y simply coating the sur face with an exterior-grade paint.

• Use when the temperature of the base

material is below 41°F.

• Use as a firestopping material. Please

refer to the Hilti Firestop Inspection & Installation Manual for specific details.

7.2.1.3 INSTALLA TION DATA

7.2.1.4 INSTALLA TION INSTRUCTIONS

Basic Use Plumbing

• Sealing pipes & hoses

• Insulating hot water lines

• Reducing noise & vibration

• Reinforcing fiberglass showers

• Filling complex penetrations

HV AC

• Sealing duct penetrations

• Sealing around air vents

• Sealing A/C penetrations

• Blocking dust, mold, & other allergens

• Sealing against cold smoke transfer

Electrical

• Sealing wire & cable penetrations

• Sealing junction boxes

• Sealing around outlet & switch boxes

• Sealing recessed lighting fixtures

• Sealing complex penetrations & cable trays

General Construction

• Sealing sill & wall joints

• Filling pest & rodent pathways

• Sealing & insulating metal buildings

• Sealing concrete forms & decking joints

• Soundproofing between walls & floors

After curing, CF 116 can be cut, sanded, painted, stained or otherwise finished.

Shake the can thoroughly before use.

Fit the nozzle to the can. Fit the grip to the nozzle. Hold the can upside

down (valve underneath) when applying the foam.

If a pause is made during application, bend the nozzle back (with two folds) and push the tip of the tube into the locating pin to help prevent curing of foam in nozzle.