HIKVISION DS-PD2-T10P-WEH User Manual
DS-PD2-T10P-WEH
10m Wireless Outdoor Detector
E N G L I S H
(Diagram references)
PCB Overview
LED Indic
Microwave Adjustment: 0m to 15m
Dip Switches 1-4
Procedure
Signal Strength Test
Inser
Fixed Mask or Flexible Mask
Flexible Mask Adjustment (1)
Flexible Mask Adjustment (2)
10m Lens Diagram
Guidelines
for safety reasons, having limited output current.
When disposing of the
pro
ry must be removed and disposed of separately in
accor
d
ance with the local regulaons.
33
34
Max: 15m
Approx: 10m
OFF
LOW
+
+
+
+
HIGH
+
+
+
+
LOW
+
+
+
+
HIGH
+
+
+
+
1
3
11 12 13
5
BOTTOM PIR
TOP PIR ALARM MICROWAVE
Powering Up / Accensione
ssa
T vated /
PIR Alto A vato
Microwave Ac vated /
Microonda A vata
vated /
PIR Basso A vato
Alarm / Allarme
LEDs OFF
Buzzer OFF
Top PIR
LOW
LOW
LEDs ON
Buzzer ON
Top PIR
HIGH
HIGH
4
LEDs OFF
Italiano
English
Buzzer OFF
’ PIR
Superiore: Bassa
’ PIR
Inferiore: Bassa
LEDs ON
Buzzer ON
’ PIR
Superiore: Alta
’ PIR
Inferiore Alta
4
START
TAMPER
TAMPER
2 x 3.0V
Lithium
4700mAh
2
1
2
33
34
3
5
3
6
3
7
3
8
3
9
3
10
3
11
3
12
3
13
3
14
3
WALLBRACKET
12 13
FIXEDBRACKET
This product and - if applicable - the supplied accessories too are marked with "CE"
and comply therefore with the applicable harmonized European standards listed
COPYRIGHT ©2018 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
About this Manual
This manual is applicable to detector.
latest version in the company website
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
owners.
E
O
L
E
O
L
E
O
L
E
O
L
E
O
L
Detec on Range 10m
Detec on Angle 90°
Detec on Zones
78，5 P lanes
Detec
on speed 0.2 5 - 3m/s
Moun
ng Height 2.4m
Two-wa y wireles s technolog y yes
Blue Wa ve Tec hnology yes
Dual elem ent P yroelec tric s enso r yes
Tampe r protection Front, rear, and bracket tamper signal input
Intergrated walk tes t buz zer yes
Top: Mic rowave , P IR 1 a nd ala rm
Bottom: P IR 2
Signa l S trength Indicators (S S I) Yes
3 microwa ve fre quenc ies to avoid interferenc e yes
Digital indepe ndent floa ting thres hold ( IFT ) tec hnology yes
Plastic hous ing Poly carbon ate
Animal immu nity 10kg
Optics Sea led
High or low rang e
0.4mm HDP E in lens a rea
White light filter 650 0 L ux
Lens UV co mpens ated
Detection m ethod Tri-S ignal D etection Log ic
Sens or 2 low noise d ual elem ent pa ss ive infra red s ens ors a nd a microw ave doppler unit
Weatherproof IP55 ra ted
Certified op erating tempera ture -20℃~+70℃
Phys ical dime nsions (H x W x D) 180mm x 80m m x 105m m
Weight 500g
Trans miss ion freque ncy 433MHz, F M trans ceive r
Rang e in o pen s pac e 800
Battery typ e 3V L ithium b attery (inc luded)
Electrica l confo rmity CE
Warranty 2 years
Rotatable wall mounted Yes - add i
onal wall and fixed b rackets available s eparately
Fixed wall mounted
Yes - addi onal wall an d fixed brackets a vailable separa tely
Celling mounted
Yes - addi
onal wall and fixed b rackets available s eparately
Accessories
Detectors techn ical c harac teristics
Sepa rate L E D indic ation
Adjustable sen sitivity
Environme ntal a nd ope rating fe atures
Electrica l & battery
Certifications an d warra nty
Fixed Bracket
DIAGNOSTICS?
View Wireless
Device Status?
Signal Strength?
Please Wait...
300
3---------------
----------------
5s
≤300s
35
36
DIAGNOSTICS?
View Wireless
Device Status?
?
Please Wait...
300
Input 01
Good
DIAGNOSTICHE?
e
?
a
Ingresso?
.
300
Ing. 01
Buona
5s
≤300s
37
WIRELESS DEVICE
CONTROL?
Learn Devices?
Control Inputs?
Input 01
Available [01]
Learning
MEMORIZZA RADIO?
Memorizza?
Ingressi Radio?
Ingr. 01
Disponibile [01]
Premi Tasto...
Microwave at 10M
90˚,
78 Zones, 5 Planes.
<10kg
37
38
3
9
310
Horizontal Coverage
V overage
obscure the detector’s field of view
with large objects
Memorizzata!
Input Learnt!
2
3
Within 50CM
Control Panel
Register Detector Locally
Register Detector via APP
The green LED will
Note: The distance between the security control panel and the detector should be less than 50 cm.
Unregister Detector
Delete the Detector from the Control Panel
1
Log in to the APP Store and input “Hik-Connect” to search the mobile client.
5
6
Log in the Hik-Connect and ap the icon “+” at the upper-right coner of the Hik-Connect page to add the
security control panel. You can scan the QR code on the device rear panel or on the package box, or input the
device serial No. manually to add the device
.
2
Download and install Hik-Connect to your phone.
3
4
Power on the security control panel.
6
7
three LEDs flash alternately.
three LEDs flash once together.
Control panel enter the
signal strength checking mode
Loading...