Technical Specification
DS-9500NI-ST Series NVR
Technical Specification
©2006 – 2012 by HIKVISION. All rights reserved.
Technical Specification
Notices
The information in this documentation is subject to change without notice and does
not represent any commitment on behalf of HIKVISION. HIKVISION disclaims any
liability whatsoever for incorrect data that may appear in this documentation. The
product(s) described in this documentation are furnished subject to a license and
may only be used in accordance with the terms and conditions of such license.
Copyright © 2006-2012 by HIKVISION. All rights reserved.
This documentation is issued in strict confidence and is to be used only for
the purposes for which it is supplied. It may not be reproduced in whole or in
part, in any form, or by any means or be used for any other purpose without prior
written consent of HIKVISION and then only on the condition that this notice is
included in any such reproduction. No information as to the contents or subject
matter of this documentation, or any part thereof, or arising directly or indirectly
therefrom, shall be given orally or in writing or shall be communicated in any
manner whatsoever to any third party being an individual, firm, or company or any
employee thereof without the prior written consent of HIKVISION. Use of this
product is subject to acceptance of the HIKVISION agreement required to use this
product. HIKVISION reserves the right to make changes to its products as
circumstances may warrant, without notice.
This documentation is provided “as-is,” without warranty of any kind.
Please send any comments regarding the documentation to:
overseasbusiness@hikvision.com
Find out more about HIKVISION at www.hikvision.com
©2006 – 2012 by HIKVISION. All rights reserved.
Technical Specification
Main Features
Connectable to the third-party network cameras with up to 5
Megapixels resolution.
Support storage of video at 5.0 Megapixels resolution.
Searching record files and captured pictures by events (alarm
input/motion detection).
Holiday recording schedule configuration.
HDD quota management; different capacity can be assigned to
different channel.
Redundant recording and capturing.
8 SATA interfaces available.
Support eSATA disk for recording or backup.
Dual system design ensures high reliability and stability.
2 self-adaptive 10M/100M/1000M network interfaces, with
working modes configurable: multi-address, load balance,
network fault tolerance, etc.
IPv6 is supported.
TCP/IP protocol, PPPoE, DHCP, DNS, DDNS, NTP, SADP, SMTP,
SNMP, NFS, UPnP and iSCSI are supported.
©2006 – 2012 by HIKVISION. All rights reserved.
Technical Specification
Functions & Performances
General
Connectable to the third-party IP cameras, IP dome and DVS.
Each channel supports dual-stream.
Up to 32 network cameras can be added.
Independent configuration for each channel, including resolution, frame
rate, bit rate, image quality, etc.
The quality of the imported and exported record is configurable.
HDD Management
Up to 8 SATA hard disks, 8 network disks (8 NAS disks, or 7 NAS disks+1
iSCSI disk) and 1 eSATA disk can be connected, each disk with a
maximum of 4TB storage capacity.
Support eSATA disk for recording or backup.
Support S.M.A.R.T. and bad sector detection.
HDD group management.
Support HDD standby function.
HDD property: redundancy, read-only, read/write (R/W).
HDD quota management; different capacity can be assigned to different
channel.
Recording and Capturing
Holiday recording schedule configuration.
Cycle and non-cycle recording mode.
Multiple recording types: manual, continuous, alarm, motion, motion |
alarm, motion & alarm.
8 recording time periods with separated recording types.
Pre-record and post-record for alarm, motion detection for recording or
capture, and pre-record time for schedule and manual recording.
Searching record files and captured pictures by events (alarm
input/motion detection).
Locking and unlocking record files.
Local redundant recording and capturing.
Manual capture and continuous capture are supported.
Backup
Support NTFS and FAT32 formatted backup devices.
Export data by USB, or eSATA disk.
Management and maintenance of backup devices.
Alarm and Exception
Configurable arming time of alarm input/output.
Alarm for video loss, motion detection, tampering, abnormal signal,
©2006 – 2012 by HIKVISION. All rights reserved.
Technical Specification
different input and output video standard, illegal login, network
disconnected, IP confliction, abnormal record/capture, Video Signal
Exception, Resolution Mismatch, HDD error, and HDD full, etc.
Alarm triggers full screen monitoring, audio alarm, notifying surveillance
center, sending email and alarm output.
Automatic restore when system is abnormal.
Network Functions
2 self-adaptive 10M/100M/1000M network interfaces, with working
modes configurable: multi-address, load balance, network fault tolerance,
etc.
IPv6 is supported.
TCP/IP protocol, PPPoE, DHCP, DNS, DDNS, NTP, SADP, SMTP, SNMP, NFS,
UPnP, and iSCSI are supported.
TCP, UDP and RTP for unicast.
Remote search, playback and download, lock/unlock of video files;
support breakpoint resume.
Remote parameters setup; remote import/export of device parameters.
Remote viewing of the device status, system logs and alarm status.
Remote keyboard operation.
Remote HDD formatting and program upgrading.
Remote system restart and shutdown.
RS-232, RS-485 transparent channel transmission.
Alarm and exception information can be sent to the remote host
Remotely start/stop recording.
Remotely start/stop alarm output.
Remote PTZ control.
Remote JPEG capture.
Embedded WEB server.
Other Functions
Control via remote control and special keyboard.
Three-level user management; admin user is allowed to create many
operating accounts and define their operating permissions, which includes
the limit to access any channel.
Powerful recording and search for logs of operation, alarm and exceptions.
Import/export of device configuration files.
• Development Scalability
SDK for Windows and Linux system.
Source code of application software for demo.
Development support and training for application system.
©2006 – 2012 by HIKVISION. All rights reserved.
Technical Specification
Panels & Interfaces
Front Panel
① Status Indicator(Power, Alarm, Tx/Rx, HDD, Ready, Backup)
② Backup Button
③ USB Interface
④ Power Button
⑤ Channel Status Indicators
©2006 – 2012 by HIKVISION. All rights reserved.
Technical Specification
Rear Panel of DS-9500NI-ST
① RS-232 Serial Interface
② eSATA Interface
③ LAN1, LAN2 Network Interface
④ RS-485 Serial Interface, Keyboard Interface, ALARM IN and ALARM OUT
⑤ GND
⑥ 100~240VAC Power Input
⑦ Power Switch
⑧ USB Interface
⑨ Terminal Switch
⑩ Reset
©2006 – 2012 by HIKVISION. All rights reserved.
Technical Specification
Model
DS-9508NI
-ST
DS-9516NI
-ST
DS-9532NI
-ST
Video input
IP video input
8-ch
16-ch
32-ch
Encoding
Parameters
Recording
resolution
5MP/3MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2
CIF/CIF/QCIF
Hard disk
SATA
8 SATA interfaces
eSATA
1 eSATA interface
Capacity
Up to 4TB capacity for each HDD
External
interface
Network
interface
2 RJ-45 10 /100 /1000 Mbps self-adaptive
Ethernet interfaces
Serial interface
1 RS-232 interface (for parameters
configuration, maintenance, transparent
channel);
1 RS-485 interface;
1 RS-485 keyboard interface (for special
keyboard control)
USB interface
3 × USB 2.0
Alarm in
16
Alarm out
4
General
Power supply
100 ~ 240 VAC, 6.3 A, 50 ~ 60 Hz
Consumption
(without hard
disk or
DVD-R/W)
≤ 45 W
Working
temperature
-10 ºC ~ +55 ºC
Working
humidity
10 % ~ 90 %
Chassis
19-inch rack-mounted 2U chassis
Dimensions
(W × D × H)
445 × 470 ×90 mm (17.52" ×18.5"× 3.54")
Weight
≤ 8 Kg (17.64 lb) ( without hard disk or
DVD-R/W )
Specifications
©2006 – 2012 by HIKVISION. All rights reserved.
Loading...