Hikvision DS-9008HMFI-ST-GW Specsheet

DS-9000HMFI-ST Series
Introduction:
Available Models:
DS-9000HMFI-ST series
The 3G dialing function is only supported by the “/GW” devices. The Wi-Fi function is only supported by the “/WIdevices.
Main Features:
User-friendly GUI providing easy and flexible operations Each channel supporting up to WD1 resolution with high-efficient and
flexible H.264 encoding technology
Built-in 3G (WCDMA) and Wi-Fi (optional) module providing flexible
data transmission solutions
pluggable GPS (Global Positioning System) module precisely positioning
the vehicle via the satellite, recording the location information in the video
Hikvision private protocol (4000 protocol) 3-ch CVBS video outputs and 3-ch audio outputs 1-ch VGA video output at up to 1920×1080 resolution Two pluggable 2.5-inch HDDs / SSDs and one SD / SDHC card, adopting
hard disk vibration damping technology
Information collection interfaces collecting driving information such as
left/right turn, braking, backing up, etc.
Hard disk box with USB interface supporting intelligent temperature
control and data export
Specialized aviation connectors ensuring signal stability Extension interfaces for external devices, such as G-sensor, etc. Delay (0~6h) shutdown and 24-hour scheduled startup/shutdown Wide-range power input (+8VDC ~+36 VDC) Power-off protection avoiding key data from loss Aluminum die-cast chassis with no fan design well adaptable to working
environment
Software-based firewall supported
Physical Interfaces:
Front Panel
Index
Name
Description
1
AV OUT
6-pin aviation plug for audio & video output, providing power supply
2
LAN
Network interface
3
USB/eSATA
USB interface/eSATA interface
4
Indicators
PWR: Power indicator Light in green after device startup; Light in
red when device standby.
GNSS: GNSS indicator The light is out when GNSS module is
abnormal; Light in green when the GNSS module is working normally and positioning; Blink in green after the positioning is complete successfully.
RDY: Ready indicator Light in green when the device is started up
3G: 3G indicator Light in green when 3G module works
normally; Blink slowly in 3G registration; Blink fast after successful 3G registration.
REC: Record indicator Light in green in recording; The light is out
when all recording processes are abnormal.
ALM: Alarm indicator Light in red when alarm occurs.
IR: IR receiver Receive IR signal from remote control.
5
SD Card Slot
Insert the SD card for data storage.
Mobile DVR
© 2014 by HIKVISION. All rights reserved.
Rear Panel
Index
Name
Description
1
M-ANT
3G master antenna interface
2
WIFI
Wi-Fi antenna interface (reserved)
3
GNSS
GNSS antenna interface
4
CAN
CAN function interface (reserved)
5
ALARM
Alarm input/output interface, including sensor input
6
SPOT
Spot output interface of video
7
AVOUT
4-pin aviation plug for audio & video output
8
RS232
Connector for RS-232 devices
9
EXT.DEV
10-pin aviation plug for RS-422 communication (also reserved for automobile station reporter)
10
POWER
6-pin aviation plug for power supply
11
VGA
VGA interface
12
CH1~CH4
Audio & video input of channel 1~4, providing power supply (12V)
13
CH5~CH8
Audio & video input of channel 5~8, providing power supply (12V)
14
CH9~CH12
Audio & video input of channel 9~12, providing power supply (12V)
Part function is optional. For details, see the actual device model. The interfaces vary according to the actual device models.
© 2014 by HIKVISION. All rights reserved.
Loading...
+ 2 hidden pages