HIKVISION DS-9632NI-I8, DS-9632NI-I16, DS-9664NI-I16, DS-7608NI-I2, DS-7616NI-I2 User Manual
...
Network Video Recorder
User Manual
UD01081B
Network Video Recorder User Manual
User Manual
COPYRIGHT ©2016 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou
Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”). This user
manual (hereinafter referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed,
partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise stipulated,
Hikvision does not make any warranties, guarantees or representations, express or implied, regarding to the
Manual.
About this Manual
This Manual is applicable to Network Video Recorder (NVR).
The Manual includes instructions for using and managing the product. Pictures, charts, images and all other
information hereinafter are for description and explanation only. The information contained in the Manual is
subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the
company website (http://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions.
Other trademarks and logos mentioned below are the properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH
ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND
ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR
PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS
DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS,
DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR
DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE
WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR
ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER
ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS;
HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS
THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS
USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE
LATER PREVAILS.
1
Network Video Recorder User Manual
Regulatory Information
FCC Information
FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and comply
therefore with the applicable harmonized European standards listed under the EMC Directive
2004/108/EC, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper recycling, return this product to your local
supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection
points. For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted
municipal waste in the European Union. See the product documentation for specific battery
information. The battery is marked with this symbol, which may include lettering to indicate
cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a
designated collection point. For more information see: www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
2
Network Video Recorder User Manual
Warnings Follow these
safeguards to prevent serious
injury or death.
Cautions Follow these
precautions to prevent
potential injury or material
damage.
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss.
The precaution measure is divided into “Warnings” and “Cautions”
Warnings: Serious injury or death may occur if any of the warnings are neglected.
Cautions: Injury or equipment damage may occur if any of the cautions are neglected.
Warnings
● Proper configuration of all passwords and other security settings is the responsibility of the installer and/or
end-user.
● In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation
and region. Please refer to technical specifications for detailed information.
● Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with
100~240 VAC or 12 VDC according to the IEC60950-1 standard. Please refer to technical specifications for
detailed information.
● Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire
hazard.
● Please make sure that the plug is firmly connected to the power socket.
● If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then
please contact the service center.
3
Network Video Recorder User Manual
Preventive and Cautionary Tips
Before connecting and operating your device, please be advised of the following tips:
• Ensure unit is installed in a well-ventilated, dust-free environment.
• Unit is designed for indoor use only.
• Keep all liquids away from the device.
• Ensure environmental conditions meet factory specifications.
• Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of dropping it
may cause damage to the sensitive electronics within the unit.
• Use the device in conjunction with an UPS if possible.
• Power down the unit before connecting and disconnecting accessories and peripherals.
• A factory recommended HDD should be used for this device.
• Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or
equivalent type only. Dispose of used batteries according to the instructions provided by the battery
manufacturer.
4
Network Video Recorder User Manual
Series
Model
DS-9600NI-I8
DS-9608NI-I8
DS-9616NI-I8
DS-9632NI-I8
DS-9664NI-I8
DS-9600NI-I16
DS-9616NI-I16
DS-9632NI-I16
DS-9664NI-I16
DS-7600NI-I2
DS-7608NI-I2
DS-7616NI-I2
DS-7632NI-I2
DS-7600NI-I2/P
DS-7608NI-I2/8P
DS-7616NI-I2/16P
DS-7632NI-I2/16P
DS-7700NI-I4
DS-7708NI-I4
DS-7716NI-I4
DS-7732NI-I4
DS-7700NI-I4/P
DS-7708NI-I4/8P
DS-7716NI-I4/16P
DS-7732NI-I4/16P
DS-8600NI-K8
DS-8608NI-K8
DS-8616NI-K8
DS-8632NI-K8
DS-7700NI-K4
DS-7708NI-K4
DS-7716NI-K4
DS-7732NI-K4
DS-7700NI-K4/P
DS-7708NI-K4/8P
DS-7716NI-K4/16P
DS-7732NI-K4/16P
DS-7600NI-K2
DS-7608NI-K2
DS-7616NI-K2
DS-7632NI-K2
DS-7600NI-K2/P
DS-7608NI-K2/8P
DS-7616NI-K2/16P
DS-7632NI-K2/16P
DS-7600NI-K1
DS-7604NI-K1
DS-7608NI-K1
DS-7616NI-K1
DS-7600NI-K1/4P
DS-7604NI-K1/4P
Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer.
The figures in the manual are for reference only.
This manual is applicable to the models listed in the following table.
5
Network Video Recorder User Manual
Product Key Features
General
Connectable to network cameras, network dome and encoders.
Connectable to the third-party network cameras like ACTI, Arecont, AXIS, Bosch, Brickcom, Canon,
PANASONIC, Pelco, SAMSUNG, SANYO, SONY, Vivotek and ZAVIO, and cameras that adopt
ONVIF or PSIA protocol.
Connectable to the smart IP cameras.
H.265/H.264/MPEG4 video formats
PAL/NTSC adaptive video inputs.
Each channel supports dual-stream.
Up to 8/16/32/64 network cameras can be added according to different models.
Independent configuration for each channel, including resolution, frame rate, bit rate, image quality, etc.
The quality of the input and output record is configurable.
Local Monitoring
HDMI/VGA1 and HDMI2/VGA2 outputs provided for DS-9600NI and DS-8600NI series NVR.
HDMI and VGA outputs provided for DS-7600NI and DS-7700NI series NVR.
HDMI Video output at up to 4K resolution and VGA video output at up to 2K resolution.
Multiple screen display in live view is supported, and the display sequence of channels is adjustable.
Live view screen can be switched in group. Manual switch and auto-switch are provided and the
auto-switch interval is configurable.
Quick setting menu is provided for live view.
Motion detection, video tampering, video exception alert and video loss alert functions.
Privacy mask.
Multiple PTZ protocols supported; PTZ preset, patrol and pattern.
Zooming in by clicking the mouse and PTZ tracing by dragging mouse.
HDD Management
Up to 16 SATA hard disks and 1 eSATA disk can be connected for DS-9600NI-I16, up to 8 SATA hard
disks and 1 eSATA disk can be connected for DS-9600NI-I8 and DS-8600NI-K8, 4 SATA hard disks for
DS-7700NI, 2 SATA hard disks for DS-7600NI-I2/K2 (/P), and 1 SATA hard disk for DS-7600NI-K1 (/P)
series NVR.
Up to 6TB storage capacity for each disk supported.
Supports 8 network disks (NAS/IP SAN disk).
Supports S.M.A.R.T. and bad sector detection.
HDD group management.
Supports HDD standby function.
HDD property: redundancy, read-only, read/write (R/W).
HDD quota management; different capacity can be assigned to different channel.
For DS-9600NI-I8 and DS-9600NI-I16 series, RAID0, RAID1, RAID5, RAID6 and RAID 10 are
supported.
Hot-swappable RAID storage scheme, and can be enabled and disabled on your demand. And 16 arrays
can be configured.
DS-9600NI-I8 and DS-9600NI-I16 series NVR support disk clone to the eSATA disk.
Recording, Capture and Playback
6
Network Video Recorder User Manual
The capture is supported by DS-9600NI-I8 and DS-9600NI-I16 only.
Holiday recording schedule configuration.
Continuous and event video recording parameters.
Multiple recording types: manual, continuous, alarm, motion, motion | alarm, motion & alarm and VCA.
8 recording time periods with separated recording types.
Pre-record and post-record for alarm, motion detection for recording, and pre-record time for schedule
and manual recording.
Searching record files and captured pictures by events (alarm input/motion detection).
Tag adding for record files, searching and playing back by tags.
Locking and unlocking record files.
Local redundant recording and capture.
Provide new playback interface with easy and flexible operation.
Searching and playing back record files by channel number, recording type, start time, end time, etc.
Smart search for the selected area in the video.
Zooming in when playback.
Reverse playback of multi-channel.
Supports pause, play reverse, speed up, speed down, skip forward, and skip backward when playback,
and locating by dragging the mouse.
Supports thumbnails view and fast view during playback.
Up to 16-ch synchronous playback at 1080p real time.
Manual capture, continuous capture of video images and playback of captured pictures.
Supports enabling H.264+ to ensure high video quality with lowered bitrate.
Backup
Export video data by USB, SATA or eSATA device (for DS-9600NI-I8 and DS-9600NI-I16 only).
Export video clips when playback.
Management and maintenance of backup devices.
Either Normal or Hot Spare working mode is configurable to constitute an N+1 hot spare system.
Alarm and Exception
Configurable arming time of alarm input/output.
Alarm for video loss, motion detection, tampering, abnormal signal, video input/output standard
mismatch, illegal login, network disconnected, IP confliction, abnormal record/capture, HDD error, and
HDD full, etc.
VCA detection alarm is supported.
VCA search for face detection, vehicle plate, behavior analysis, people counting and heat map.
Alarm triggers full screen monitoring, audio alarm, notifying surveillance center, sending email and
alarm output.
Automatic restore when system is abnormal.
Other Local Functions
Operable by front panel, mouse, remote control, or control keyboard.
Three-level user management; admin user is allowed to create many operating accounts and define their
operating permission, which includes the limit to access any channel.
Operation, alarm, exceptions and log recording and searching.
Manually triggering and clearing alarms.
Import and export of device configuration information.
7
Network Video Recorder User Manual
Network Functions
Two self-adaptive 10M/100M/1000M network interfaces for DS-9600NI-I8, DS-9600NI-I16,
DS-8600NI-K8, DS-7700NI-I4 and DS-7700NI-K4, and the multi-address and network fault tolerance
working modes are configurable.
One self-adaptive 10M/100M/1000M network interface for DS-7600NI-K2/I2(/P), DS-7700NI-I4/P and
DS-7700NI-K4/P.
One self-adaptive 10M/100M network interface for DS-7600NI-K1 (/P).
Four independent PoE network interfaces are provided for /4P models, eight independent PoE network
interfaces for the /8P models, and sixteen independent PoE network interfaces for the /16P models.
IPv6 is supported.
TCP/IP protocol, DHCP, DNS, DDNS, NTP, SADP, SMTP, SNMP, NFS, and iSCSI are supported.
TCP, UDP and RTP for unicast.
Auto/Manual port mapping by UPnPTM.
Extranet access by HiDDNS.
Support access by HIK Cloud P2P.
Remote web browser access by HTTPS ensures high security.
The ANR (Automatic Network Replenishment) function is supported, it enables the IP camera save the
recording files in the local storage when the network is disconnected, and synchronizes the files to the
NVR when the network is resumed.
Remote reverse playback via RTSP.
Supports accessing by the platform via ONVIF.
Remote search, playback, download, locking and unlocking of the record files, and support downloading
files broken transfer resume.
Remote parameters setup; remote import/export of device parameters.
Remote viewing of the device status, system logs and alarm status.
Remote keyboard operation.
Remote locking and unlocking of control panel and mouse.
Remote HDD formatting and program upgrading.
Remote system restart and shutdown.
RS-232, RS-485 transparent channel transmission.
Alarm and exception information can be sent to the remote host
Remotely start/stop recording.
Remotely start/stop alarm output.
Remote PTZ control.
Remote JPEG capture.
Virtual host function is provided to get access and manage the IP camera directly.
Two-way audio and voice broadcasting.
Embedded WEB server.
Development Scalability:
SDK for Windows system.
Source code of application software for demo.
Development support and training for application system.
8
Network Video Recorder User Manual
TABLE OF CONTENTS
Product Key Features .............................................................................................................................. 6
Chapter 1 Introduction ........................................................................................................................ 14
1.1 Front Panel .................................................................................................................................... 15
1.1.1 DS-9600NI Series ................................................................ ................................ ................ 15
1.1.2 DS-8600NI and DS-7700NI Series ...................................................................................... 17
1.1.3 DS-7600NI Series ................................................................ ................................ ................ 19
1.2 IR Remote Control Operations ...................................................................................................... 19
1.3 USB Mouse Operation .................................................................................................................. 23
1.4 Input Method Description .............................................................................................................. 24
1.5 Rear Panel ..................................................................................................................................... 25
1.5.1 DS-9600NI and DS-8600NI Series ...................................................................................... 25
1.5.2 DS-7600NI Series ................................................................ ................................ ................ 26
1.5.3 DS-7700NI Series ................................................................................................................ 28
Chapter 2 Getting Started ................................................................................................................... 29
2.1 Starting Up and Shutting Down the NVR ...................................................................................... 30
2.2 Activating Your Device ................................................................................................................. 31
2.3 Using the Unlock Pattern for Login ............................................................................................... 32
2.3.1 Configuring the Unlock Pattern ........................................................................................... 32
2.3.2 Logging in via Unlock Pattern ............................................................................................. 34
2.4 Using Wizard for Basic Configuration .......................................................................................... 35
2.5 Login and Logout .......................................................................................................................... 40
2.5.3 User Login ........................................................................................................................... 40
2.5.4 User Logout ......................................................................................................................... 40
2.6 Adding and Connecting the IP Cameras ........................................................................................ 42
2.6.1 Activating the IP Camera ..................................................................................................... 42
2.6.2 Adding the Online IP Cameras............................................................................................. 43
2.6.3 Editing the Connected IP Cameras and Configuring Customized Protocols ........................ 47
2.6.4 Editing IP Cameras Connected to the PoE Interfaces .......................................................... 50
Chapter 3 Live View ............................................................................................................................. 53
3.1 Introduction of Live View ............................................................................................................. 54
3.2 Operations in Live View Mode ...................................................................................................... 55
3.2.1 Front Panel Operation on Live View .................................................................................... 55
3.2.2 Using the Mouse in Live View ............................................................................................. 56
3.2.3 Using an Auxiliary Monitor ................................................................................................. 57
3.2.4 Quick Setting Toolbar in Live View Mode .......................................................................... 57
3.2.5 Fisheye Expansion View ...................................................................................................... 59
3.3 Adjusting Live View Settings ........................................................................................................ 61
3.4 Channel-zero Encoding ................................................................................................................. 63
Chapter 4 PTZ Controls ...................................................................................................................... 64
4.1 Configuring PTZ Settings .............................................................................................................. 65
4.2 Setting PTZ Presets, Patrols & Patterns......................................................................................... 66
4.2.1 Customizing Presets ............................................................................................................. 66
9
Network Video Recorder User Manual
4.2.2 Calling Presets ..................................................................................................................... 66
4.2.3 Customizing Patrols ............................................................................................................. 67
4.2.4 Calling Patrols ..................................................................................................................... 68
4.2.5 Customizing Patterns ........................................................................................................... 69
4.2.6 Calling Patterns .................................................................................................................... 69
4.2.7 Customizing Linear Scan Limit ........................................................................................... 70
4.2.8 Calling Linear Scan ............................................................................................................. 71
4.2.9 One-touch Park .................................................................................................................... 71
4.3 PTZ Control Panel ......................................................................................................................... 73
Chapter 5 Recording and Capture Settings ....................................................................................... 74
5.1 Configuring Parameters ................................................................................................................. 75
5.2 Configuring Recording and Capture Schedule .............................................................................. 79
5.3 Configuring Motion Detection Recording and Capture ................................................................. 83
5.4 Configuring Alarm Triggered Recording and Capture................................................................... 85
5.5 Manual Recording and Continuous Capture ................................................................ .................. 87
5.6 Configuring Holiday Recording and Capture ................................................................................ 88
5.7 Configuring Redundant Recording and Capture ............................................................................ 90
5.8 Configuring HDD Group for Recording and Capture.................................................................... 92
5.9 Files Protection .............................................................................................................................. 93
5.9.1 Locking the Recording Files ................................................................................................ 93
5.9.2 Setting HDD Property to Read-only .................................................................................... 95
Chapter 6 Playback .............................................................................................................................. 97
6.1 Playing Back Record Files ............................................................................................................ 98
6.1.1 Instant Playback ................................................................................................................... 98
6.1.2 Playing Back by Normal Search .......................................................................................... 98
6.1.3 Playing back by Smart Playback ........................................................................................ 101
6.1.4 Playing Back by Event Search ........................................................................................... 104
6.1.5 Playing Back by Tag .......................................................................................................... 105
6.1.6 Playing Back by Sub-periods ............................................................................................. 108
6.1.7 Playing Back by System Logs ........................................................................................... 108
6.1.8 Playing Back External File ................................................................................................ 110
6.1.9 Playing Back Pictures ........................................................................................................ 111
6.2 Auxiliary Functions of Playback ................................................................................................. 113
6.2.1 Playing Back Frame by Frame ........................................................................................... 113
6.2.2 Thumbnails View ............................................................................................................... 113
6.2.3 Fast View ........................................................................................................................... 114
6.2.4 Digital Zoom ...................................................................................................................... 114
6.2.5 File Management ............................................................................................................... 115
Chapter 7 Backup .............................................................................................................................. 117
7.1 Backing up Record Files ............................................................................................................. 118
7.1.1 Quick Export ...................................................................................................................... 118
7.1.2 Backing up by Normal Video/Picture Search ..................................................................... 120
7.1.3 Backing up by Event Search .............................................................................................. 122
7.1.4 Backing up Video Clips or Captured Playback Pictures .................................................... 123
10
Network Video Recorder User Manual
7.2 Managing Backup Devices .......................................................................................................... 124
7.3 Hot Spare Device Backup............................................................................................................ 125
7.3.1 Setting Hot Spare Device ................................................................................................... 125
7.3.2 Setting Working Device ..................................................................................................... 126
7.3.3 Managing Hot Spare System.............................................................................................. 126
Chapter 8 Alarm Settings .................................................................................................................. 129
8.1 Setting Motion Detection Alarm .................................................................................................. 130
8.2 Setting Sensor Alarms ................................................................................................ ................. 132
8.3 Detecting Video Loss Alarm ........................................................................................................ 135
8.4 Detecting Video Tampering Alarm .............................................................................................. 136
8.5 Handling Exceptions Alarm ......................................................................................................... 138
8.6 Setting Alarm Response Actions ................................................................................................. 139
8.7 Triggering or Clearing Alarm Output Manually ................................ ................................ .......... 142
Chapter 9 VCA Alarm ....................................................................................................................... 143
9.1 Face Recognition ......................................................................................................................... 144
9.2 Face Detection ............................................................................................................................. 144
9.3 Vehicle Detection ........................................................................................................................ 145
9.4 Line Crossing Detection .............................................................................................................. 147
9.5 Intrusion Detection ...................................................................................................................... 149
9.6 Region Entrance Detection .......................................................................................................... 151
9.7 Region Exiting Detection ............................................................................................................ 152
9.8 Loitering Detection ...................................................................................................................... 152
9.9 People Gathering Detection ................................................................................................ ......... 152
9.10 Fast Moving Detection ................................................................................................................ 152
9.11 Parking Detection ........................................................................................................................ 153
9.12 Unattended Baggage Detection ................................................................................................... 153
9.13 Object Removal Detection........................................................................................................... 153
9.14 Audio Exception Detection ......................................................................................................... 154
9.15 Sudden Scene Change Detection ................................................................................................. 155
9.16 Defocus Detection ....................................................................................................................... 155
9.17 PIR Alarm .................................................................................................................................... 155
Chapter 10 VCA Search ...................................................................................................................... 156
10.1 Face Search ................................................................................................................................. 157
10.2 Behavior Search .......................................................................................................................... 159
10.3 Plate Search ................................................................................................................................. 160
10.4 People Counting .......................................................................................................................... 161
10.5 Heat Map ..................................................................................................................................... 162
Chapter 11 Network Settings .............................................................................................................. 164
11.1 Configuring General Settings ...................................................................................................... 165
11.2 Configuring Advanced Settings ................................................................................................... 167
11.2.1 Configuring HIK Cloud P2P .............................................................................................. 167
11.2.2 Configuring DDNS ............................................................................................................ 167
11.2.3 Configuring NTP Server .................................................................................................... 172
11.2.4 Configuring SNMP ............................................................................................................ 173
11
Network Video Recorder User Manual
11.2.5 Configuring More Settings................................................................................................. 173
11.2.6 Configuring HTTPS Port ................................................................................................... 174
11.2.7 Configuring Email ............................................................................................................. 176
11.2.8 Configuring NAT ............................................................................................................... 177
11.2.9 Configuring Virtual Host ................................................................................................... 180
11.3 Checking Network Traffic ........................................................................................................... 181
11.4 Configuring Network Detection .................................................................................................. 183
11.4.1 Testing Network Delay and Packet Loss ............................................................................ 183
11.4.2 Exporting Network Packet ................................................................................................. 183
11.4.3 Checking the Network Status ............................................................................................. 184
11.4.4 Checking Network Statistics .............................................................................................. 185
Chapter 12 RAID ................................................................................................................................. 187
12.1 Configuring Array ....................................................................................................................... 188
12.1.1 Enable RAID ..................................................................................................................... 189
12.1.2 One-touch Configuration ................................................................................................... 189
12.1.3 Manually Creating Array ................................................................................................... 191
12.2 Rebuilding Array ......................................................................................................................... 193
12.2.1 Automatically Rebuilding Array ........................................................................................ 193
12.2.1 Manually Rebuilding Array ............................................................................................... 194
12.3 Deleting Array ............................................................................................................................. 196
12.4 Checking and Editing Firmware .................................................................................................. 197
Chapter 13 HDD Management............................................................................................................ 198
13.1 Initializing HDDs ........................................................................................................................ 199
13.2 Managing Network HDD ............................................................................................................ 201
13.3 Managing eSATA ........................................................................................................................ 203
13.4 Managing HDD Group ................................................................................................................ 204
13.4.1 Setting HDD Groups .......................................................................................................... 204
13.4.2 Setting HDD Property ........................................................................................................ 205
13.5 Configuring Quota Mode............................................................................................................. 207
13.6 Configuring Disk Clone .............................................................................................................. 209
13.7 Checking HDD Status ................................................................................................................. 211
13.8 HDD Detection ............................................................................................................................ 213
13.9 Configuring HDD Error Alarms .................................................................................................. 215
Chapter 14 Camera Settings ............................................................................................................... 216
14.1 Configuring OSD Settings ........................................................................................................... 217
14.2 Configuring Privacy Mask........................................................................................................... 218
14.3 Configuring Video Parameters .................................................................................................... 219
Chapter 15 NVR Management and Maintenance ............................................................................. 220
15.1 Viewing System Information ....................................................................................................... 221
15.2 Searching & Exporting Log Files ................................................................................................ 222
15.3 Importing/Exporting IP Camera Info ........................................................................................... 224
15.4 Importing/Exporting Configuration Files .................................................................................... 225
15.5 Upgrading System ....................................................................................................................... 226
15.5.1 Upgrading by Local Backup Device .................................................................................. 226
12
Network Video Recorder User Manual
15.5.2 Upgrading by FTP ............................................................................................................. 226
15.6 Restoring Default Settings ................................................................................................ ........... 228
Chapter 16 Others ................................ ................................ ................................................................ 229
16.1 Configuring RS-232 Serial Port................................................................................................... 230
16.2 Configuring General Settings ...................................................................................................... 231
16.3 Configuring DST Settings ........................................................................................................... 233
16.4 Configuring More Settings ................................................................................................ .......... 234
16.5 Managing User Accounts............................................................................................................. 235
16.5.1 Adding a User .................................................................................................................... 235
16.5.2 Deleting a User .................................................................................................................. 238
16.5.3 Editing a User .................................................................................................................... 238
Chapter 17 Appendix ........................................................................................................................... 241
17.1 Specifications .............................................................................................................................. 242
17.1.1 DS-9600NI-I8 .................................................................................................................... 242
17.1.2 DS-9600NI-I16 .................................................................................................................. 243
17.1.3 DS-7600NI-I2 .................................................................................................................... 244
17.1.4 DS-7600NI-I2/P ................................................................................................................. 245
17.1.5 DS-7700NI-I4 .................................................................................................................... 246
17.1.6 DS-7700NI-I4/P ................................................................................................................. 247
17.1.7 DS-8600NI-K8 .................................................................................................................. 248
17.1.8 DS-7700NI-K4 .................................................................................................................. 249
17.1.9 DS-7700NI-K4/P ............................................................................................................... 250
17.1.10 DS-7600NI-K2 .................................................................................................................. 251
17.1.11 DS-7600NI-K2/P ............................................................................................................... 252
17.1.12 DS-7600NI-K1 .................................................................................................................. 253
17.1.13 DS-7604NI-K1/4P ............................................................................................................. 254
17.2 Glossary ....................................................................................................................................... 255
17.3 Troubleshooting ........................................................................................................................... 256
17.4 Summary of Changes .................................................................................................................. 262
Version 3.4.6 .................................................................................................................................. 262
Version 3.4.2 .................................................................................................................................. 262
Version 3.3.9 .................................................................................................................................. 262
Version 3.3.7 .................................................................................................................................. 262
Version 3.3.6 .................................................................................................................................. 263
Version 3.3.4 .................................................................................................................................. 263
17.5 List of Compatible IP Cameras .................................................................................................... 264
17.5.1 List of Hikvision IP Cameras ............................................................................................. 264
17.5.2 List of Third-party IP Cameras .......................................................................................... 271
13
Network Video Recorder User Manual
Chapter 1 Introduction
14
Network Video Recorder User Manual
No.
Name
Function Description
1
Status
Indicators
ALARM
Turns red when a sensor alarm is detected.
READY
Turns blue when the device is functioning properly.
STATUS
Turns blue when device is controlled by an IR remote.
Turns red when controlled by a keyboard and purple when IR
remote and keyboard is used at the same time.
HDD
Flickers red when data is being read from or written to HDD.
MODEM
Reserved for future usage.
Tx/Rx
Flickers blue when network connection is functioning properly.
GUARD
Turns blue when the device is in armed status; at this time, an
alarm is enabled when an event is detected.
Turns off when the device is unarmed. The arm/disarm status
can be changed by pressing and holding on the ESC button for
more than 3 seconds in live view mode.
2
IR Receiver
Receiver for IR remote control.
1.1 Front Panel
1.1.1 DS-9600NI Series
Figure 1. 1 DS-9600NI-I8 Series
Figure 1. 2 DS-9600NI-I16 Series
Table 1. 1 Panel Description
15
Network Video Recorder User Manual
No.
Name
Function Description
3
Front Panel Lock
Locks or unlocks the panel by the key.
4
DVD-R/W
Slot for DVD-R/W disk.
5
Alphanumeric Buttons
Switches to the corresponding channel in live view or PTZ
control mode.
Inputs numbers and characters in edit mode.
Switches between different channels in playback mode.
Turns blue when the corresponding channel is recording; turns
red when the channel is in network transmission status; turns
pink when the channel is recording and transmitting.
6
USB Interfaces
Universal Serial Bus (USB) ports for additional devices such as
USB mouse and USB Hard Disk Drive (HDD).
7
Composite
Keys
ESC
Returns to the previous menu.
Presses for arming/disarming the device in live view mode.
REC/SHOT
Enters the Manual Record settings menu.
Presses this button followed by a numeric button to call a PTZ
preset in PTZ control settings.
Turns audio on/off in the playback mode.
PLAY/AUTO
Enters the playback mode.
Automatically scans in the PTZ control menu.
ZOOM+
Zooms in the PTZ camera in the PTZ control setting.
A/FOCUS+
Adjusts focus in the PTZ Control menu.
Switches between input methods (upper and lower case alphabet,
symbols and numeric input).
EDIT/IRIS+
Edits text fields. When editing text fields, it also deletes the
character in front of the cursor.
Checks the checkbox in the checkbox fields.
Adjusts the iris of the camera in PTZ control mode.
Generates video clips for backup in playback mode.
Enters/exits the folder of USB device and eSATA HDD.
MAIN/SPOT/ZOO
M-
Switches between main and spot output.
Zooms out the image in PTZ control mode.
F1/ LIGHT
Selects all items on the list when used in a list field.
Turns on/off PTZ light (if applicable) in PTZ control mode.
Switches between play and reverse play in playback mode.
F2/ AUX
Cycles through tab pages.
Switches between channels in synchronous playback mode.
MENU/WIPER
Returns to the Main menu (after successful login).
Presses and holds the button for five seconds to turn off audible
key beep.
Starts wiper (if applicable) in PTZ control mode.
Shows/hides the control interface in playback mode.
PREV/FOCUS-
Switches between single screen and multi-screen mode.
Adjusts the focus in conjunction with the A/FOCUS+ button in
PTZ control mode.
16
Network Video Recorder User Manual
No.
Name
Function Description
PTZ/IRIS-
Enters the PTZ Control mode.
Adjusts the iris of the PTZ camera in PTZ control mode.
8
Control
Buttons
DIRECTION
Navigates between different fields and items in menus.
In the playback mode, use the Up and Down buttons to speed up
and slow down recorded video. Use the Left and Right buttons
to select the next and previous video files.
Cycles through channels in live view mode.
Controls the movement of the PTZ camera in PTZ control mode.
ENTER
Confirms selection in any of the menu modes.
Checks the checkbox fields.
Plays or pauses the video playing in playback mode.
Advances the video by a single frame in single-frame playback
mode.
Stops/starts auto switch in auto-switch mode.
9
JOG SHUTTLE Control
Moves the active selection up and down in a menu.
Cycles through different channels in live view mode.
Jumps 30s forward/backward in video files in the playback
mode.
Controls the movement of the PTZ camera in PTZ control mode.
10
POWER ON/OFF
Long press the button for more than 3 seconds to turn on/off the
NVR.
1.1.2 DS-8600NI and DS-7700NI Series
Figure 1. 3 DS-8600NI-K8 Series
Figure 1. 4 DS-7700NI Series
17
Network Video Recorder User Manual
No.
Name
Function Description
1
Status
Indicators
POWER
Turns green when NVR is powered up.
HDD
Blinks red when HDD is reading/writing.
Tx/Rx
Blinks green when network connection is functioning normally.
2
ENTER
The Enter button is used to confirm selection in menu mode; or
used to check checkbox fields and ON/OFF switch.
In playback mode, it can be used to play or pause the video.
In single-frame play mode, pressing the Enter button will play the
video by a single frame.
In auto sequence view mode, the buttons can be used to pause or
resume auto sequence.
The Enter button is used to confirm selection in menu mode; or
used to check checkbox fields and ON/OFF switch.
3
DIRECTION
In menu mode, the direction buttons are used to navigate between
different fields and items and select setting parameters.
In playback mode, the Up and Down buttons are used to speed up
and slow down record playing, and the Left and Right buttons are
used to move the recording 30s forwards or backwards.
In the image setting interface, the up and down button can adjust
the level bar of the image parameters.
In live view mode, these buttons can be used to switch channels.
4
Back
Back to the previous menu.
5
POWER ON/OFF
Power on/off switch.
6
MENU
Access the main menu interface.
7
USB Interface
Universal Serial Bus (USB) ports for additional devices such as
USB mouse and USB Hard Disk Drive (HDD).
Table 1. 2 Panel Description
18
Network Video Recorder User Manual
No.
Name
Connections
1
POWER
Turns green when NVR is powered up.
2
HDD
Flickers red when data is being read from or written to HDD.
3
Tx/Rx
Flickers blue when network connection is functioning properly.
4
USB Interface
Universal Serial Bus (USB) port for additional devices such as USB
mouse and USB Hard Disk Drive (HDD).
1.1.3 DS-7600NI Series
Figure 1. 5 DS-7600NI Series
Table 1. 3 Panel Description
1.2 IR Remote Control Operations
The NVR may also be controlled with the included IR remote control, shown in Figure 1. 6.
Batteries (2×AAA) must be installed before operation.
The IR Remote is set at the factory to control the NVR (using default Device ID# 255) without any additional
steps. Device ID# 255 is the default universal device identification number shared by the NVRs. You may also
pair an IR Remote to a specific NVR by changing the Device ID#, as follows:
Pairing (Enabling) the IR Remote to a Specific DVR (optional)
You can pair an IR Remote to a specific Hikvision DVR by creating a user-defined Device ID#. This feature is
useful when using multiple IR Remotes and DVRs.
On the DVR:
1. Go to General > More Settings.
2. Type a number (255 digits maximum) into the Device No. field.
3. On the IR Remote:
4. Press the DEV button.
5. Use the Number buttons to enter the Device ID# that was entered into the DVR.
6. Press Enter button to accept the new Device ID#.
19
Network Video Recorder User Manual
No.
Name
Function Description
1
POWER ON/OFF
• To Turn Power On:
- If User Has Not Changed the Default DVR Device ID# (255):
1. Press Power On/Off button (1).
- If User Has Changed the DVR Device ID#:
1. Press DEV button.
2. Press Number buttons to enter user-defined Device ID#.
3. Press Enter button.
4. Press Power button to start device.
• To Turn DVR Off:
- If User Is Logged On:
1. Hold Power On/Off button (1) down for five seconds to display the
“Yes/No” verification prompt.
2. Use Up/Down Arrow buttons (12) to highlight desired selection.
3. Press Enter button (12) to accept selection.
- If User Is Not Logged On:
1. Hold Power On/Off button (1) down for five seconds to display the user
Figure 1. 6 Remote Control
- Unpairing (Disabling) an IR Remote from a DVR
To unpair an IR Remote from a DVR so that the unit cannot control any DVR functions, proceed as follows:
Press the DEV key on the IR Remote. Any existing Device ID# will be erased from the unit’s memory and it will
no longer function with the DVR.
(Re)-enabling the IR Remote requires pairing to a DVR. See “Pairing the IR Remote to a Specific DVR
(optional),” above.
The keys on the remote control closely resemble the ones on the front panel. See 错误!未找到引用源。.
Table 1. 4 IR Remote Functions
20
Network Video Recorder User Manual
name/password prompt.
2. Press the Enter button (12) to display the on-screen keyboard.
3. Input the user name.
4. Press the Enter button (12) to accept input and dismiss the on-screen
keyboard.
5. Use the Down Arrow button (12) to move to the “Password” field.
6. Input password (use on-screen keyboard or numeric buttons (3) for
numbers).
7. Press the Enter button (12) to accept input and dismiss the on-screen
keyboard.
8. Press the OK button on the screen to accept input and display the Yes/No”
verification prompt (use Up/Down Arrow buttons (12) to move between
fields)
9. Press Enter button (12) to accept selection.
User name/password prompt depends on DVR is configuration. See “System
Configuration” section.
2
DEV
Enable IR Remote: Press DEV button, enter DVR Device ID# with number keys,
press Enter to pair unit with the DVR
Disable IR Remote: Press DEV button to clear Device ID#; unit will no longer
be paired with the DVR
3
Numerals
Switch to the corresponding channel in Live View or PTZ Control mode
Input numbers in Edit mode
4
EDIT
Delete characters before cursor
Check the checkbox and select the ON/OFF switch
5
A
Adjust focus in the PTZ Control menu
Switch on-screen keyboards (upper and lower case alphabet, symbols, and
numerals)
6
REC
Enter Manual Record setting menu
Call a PTZ preset by using the numeric buttons in PTZ control settings
Turn audio on/off in Playback mode
7
PLAY
Go to Playback mode
Auto scan in the PTZ Control menu
8
INFO
Zoom in the PTZ camera in the PTZ Control setting
9
VOIP
Switches between main and spot output
Zooms out the image in PTZ control mode
10
MENU
Return to Main menu (after successful login)
N/A
Show/hide full screen in Playback mode
12
DIRECTION
Navigate between fields and menu items
Use Up/Down buttons to speed up/slow down recorded video, and Left/Right
buttons to advance/rewind 30 secs in Playback mode
Cycle through channels in Live View mode
Control PTZ camera movement in PTZ control mode
ENTER
Confirm selection in any menu mode
Checks checkbox
Play or pause video in Playback mode
Advance video a single frame in single-frame Playback mode
Stop/start auto switch in auto-switch mode
13
PTZ
Enter PTZ Control mode
14
ESC
Go back to previous screen
N/A
15
RESERVED
Reserved
16
F1
Select all items on a list
N/A
Switch between play and reverse play in Playback mode
17
PTZ Control
Adjust PTZ camera iris, focus, and zoom
18
F2
Cycle through tab pages
Switch between channels in Synchronous Playback mode
Troubleshooting Remote Control:
Make sure you have installed batteries properly in the remote control. And you have to aim the remote control at
the IR receiver in the front panel.
21
Network Video Recorder User Manual
If there is no response after you press any button on the remote, follow the procedure below to troubleshoot.
Steps:
1. Go to Menu > Settings > General > More Settings by operating the front control panel or the mouse.
2. Check and remember NVR ID#. The default ID# is 255. This ID# is valid for all the IR remote controls.
3. Press the DEV button on the remote control.
4. Enter the NVR ID# you set in step 2.
5. Press the ENTER button on the remote.
If the Status indicator on the front panel turns blue, the remote control is operating properly. If the Status indicator
does not turn blue and there is still no response from the remote, please check the following:
1. Batteries are installed correctly and the polarities of the batteries are not reversed.
2. Batteries are fresh and not out of charge.
3. IR receiver is not obstructed.
4. No fluorescent lamp is used nearby
If the remote still can’t function properly, please change a remote and try again, or contact the device provider.
22
Network Video Recorder User Manual
Name
Action
Description
Left-Click
Single-Click
Live view: Select channel and show the quick set menu.
Menu: Select and enter.
Double-Click
Live view: Switch between single-screen and multi-screen.
Click and Drag
PTZ control: pan, tilt and zoom.
Video tampering, privacy mask and motion detection: Select target area.
Digital zoom-in: Drag and select target area.
Live view: Drag channel/time bar.
Right-Click
Single-Click
Live view: Show menu.
Menu: Exit current menu to upper level menu.
Scroll-Wheel
Scrolling up
Live view: Previous screen.
Menu: Previous item.
Scrolling down
Live view: Next screen.
Menu: Next item.
1.3 USB Mouse Operation
A regular 3-button (Left/Right/Scroll-wheel) USB mouse can also be used with this NVR. To use a USB mouse:
1. Plug USB mouse into one of the USB interfaces on the front panel of the NVR.
2. The mouse should automatically be detected. If in a rare case that the mouse is not detected, the possible
reason may be that the two devices are not compatible, please refer to the recommended the device list
from your provider.
The operation of the mouse:
Table 1. 1 Description of the Mouse Control
23
Network Video Recorder User Manual
Icon
Description
Icon
Description
…
Number
…
English letter
Lowercase/Uppercase
Backspace
Switch the keyboard
Space
Positioning the cursor
Exit
Symbols
Reserved
1.4 Input Method Description
Figure 1. 2 Soft Keyboard (1)
Figure 1. 3 Soft Keyboard (2)
Description of the buttons on the soft keyboard:
Table 1. 2 Description of the Soft Keyboard Icons
24
Network Video Recorder User Manual
No.
Name
Description
1
LAN1/LAN2 Interface
2 RJ-45 10/100/1000 Mbps self-adaptive Ethernet interfaces provided.
2
LINE IN
RCA connector for audio input.
3
AUDIO OUT
2 RCA connectors for audio output.
4
HDMI1/HDMI2
HDMI video output connector.
5
VGA1/VGA2
DB9 connector for VGA output. Display local video output and menu.
6
USB 3.0 interface
Universal Serial Bus (USB) ports for additional devices such as USB
mouse and USB Hard Disk Drive (HDD).
7
RS-232 Interface
Connector for RS-232 devices.
8
eSATA
Connects external SATA HDD, CD/DVD-RM.
9
Controller Port
D+, D- pin connects to Ta, Tb pin of controller. For cascading devices,
the first NVR’s D+, D- pin should be connected with the D+, D- pin of
the next NVR.
ALARM IN
Connector for alarm input.
ALARM OUT
Connector for alarm output.
1.5 Rear Panel
1.5.1 DS-9600NI and DS-8600NI Series
Figure 1. 7 DS-9600NI-I8 and DS-8600NI-K8 Series
Figure 1. 8 DS-9600NI-I16 Series
Table 1. 5 Panel Description
25
Network Video Recorder User Manual
No.
Name
Description
10
100 to 240 VAC
100 to 240 VAC power supply.
11
Power Switch
Switch for turning on/off the device.
12
GROUND
Ground (needs to be connected when NVR starts up).
No.
Name
Description
1
Audio In
RCA connector for audio input.
2
Audio Out
RCA connector for audio output.
3
VGA Interface
DB9 connector for VGA output. Display local video output and menu.
4
HDMI Interface
HDMI video output connector.
5
ALARM IN
Connector for alarm input.
ALARM OUT
Connector for alarm output.
6
LAN Network Interface
1 10/100/1000 Mbps self-adaptive Ethernet interface
7
USB Interface
Universal Serial Bus (USB 3.0) ports for additional devices such as
USB mouse and USB Hard Disk Drive (HDD).
8
Ground
Ground (needs to be connected when NVR starts up).
9
Power Supply
12 VDC power supply for DS-7600NI-I4 and DS-7600NI-K4, and 100
to 240 VAC for DS-7600NI-I4/P and DS-7600NI-K4/P.
10
Power Switch
Switch for turning on/off the device.
11
Network Interfaces with
PoE function
(supported by
DS-7600NI-I2/P)
Network interfaces for the cameras and to provide power over Ethernet.
1.5.2 DS-7600NI Series
DS-7600NI-I2 (/P) and DS-7600NI-K2 (/P)
Figure 1. 9 DS-7600NI-I2 and DS-7600NI-K2 Series
Figure 1. 10 DS-7600NI-I2/8P and DS-7600NI-K2/8P Series
The DS-7616NI-I2/16P and DS-7632NI-I2/16P provide 16 network Interfaces with PoE function.
Table 1. 6 Panel Description
26
Network Video Recorder User Manual
No.
Name
Description
1
Network Interfaces with
PoE function
Network interfaces for the cameras and to provide power over Ethernet.
2
Audio In
RCA connector for audio input.
3
Audio Out
RCA connector for audio output.
4
VGA Interface
DB9 connector for VGA output. Display local video output and menu.
5
HDMI Interface
HDMI video output connector.
6
LAN Network Interface
1 10/100/1000 Mbps self-adaptive Ethernet interface for
DS-7600NI-K1;
1 100 Mbps full-duplex Ethernet interface for DS-7600NI-K1/4P.
7
USB Interface
Universal Serial Bus (USB 3.0) ports for additional devices such as
USB mouse and USB Hard Disk Drive (HDD).
9
Power Supply
12VDC power supply for DS-7600NI-K1 and 48 VDC power supply
for DS-7600NI-K1/4P
10
Ground
Ground (needs to be connected when NVR starts up).
DS-7600NI-K1 and DS-7600NI-K1/4P
Figure 1. 11 DS-7600NI-K1 Series
Figure 1. 12 DS-7604NI-K1/4P Series
Table 1. 7 Panel Description
27
Network Video Recorder User Manual
No.
Name
Description
1
LAN Interface
1 network interface provided for DS-7700NI-I4/P and
DS-7700NI-K4/P, and 2 network interfaces for DS-7700NI-I4 and
DS-7700NI-K4.
2
AUDIO OUT
RCA connector for audio output.
3
LINE IN
RCA connector for audio input.
4
HDMI
HDMI video output connector.
5
USB 3.0 interface
Universal Serial Bus (USB) ports for additional devices such as USB
mouse and USB Hard Disk Drive (HDD).
6
RS-232 Interface
Connector for RS-232 devices.
7
VGA
DB9 connector for VGA output. Display local video output and menu.
8
RS-485 Interface
Half-duplex connector for RS-485 devices.
9
ALARM IN
Connector for alarm input.
ALARM OUT
Connector for alarm output.
10
GROUND
Ground (needs to be connected when NVR starts up).
11
AC 100V ~ 240V
100V to 240VAC power supply.
12
Power Switch
Switch for turning on/off the device.
13
Network Interfaces with
PoE function (supported
by DS-7700NI-I4/P and
DS-7700NI-K4/P)
Network interfaces for the cameras and to provide power over Ethernet.
1.5.3 DS-7700NI Series
Figure 1. 13 DS-7700NI-I4 and DS-7700NI-K4 Series
Figure 1. 14 DS-7700NI-I4/16P and DS-7700NI-K4/16P Series
The DS-7708NI-I4/8P and DS-7708NI-K4/8P provides 8 network Interfaces with PoE function.
Table 1. 8 Panel Description
28
Network Video Recorder User Manual
Chapter 2 Getting Started
29
Loading...