HIKVISION DS-2CD862MF-E, DS-2CD877BF, DS-2CD886BF-E, DS-2CD886MF-E, DS-2CD876BF Quick Manual

Network Camera

Quick Guide

V3.0.0

Hikvision Digital Technology Co., Ltd.

http://www.hikvision.com

Quick Guide of Network Camera

1

Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer. This manual applies to Box camera Ⅰ: DS-2CD852MF-E, DS-2CD862MF-E Box camera Ⅱ: DS-2CD886BF-E, DS-2CD886MF-E, DS-2CD877BF, DS-2CD876BF, DS-2CD876MF Box camera Ⅲ: DS-2CD883F-E(W), DS-2CD854F-E(W), DS-2CD853F-E(W), DS-2CD864FWD-E(W),

DS-2CD863PF(NF)-E(W), DS-2CD893PF(NF)-E (W), DS-2CD893PFWD(NFWD)-E(W), DS-2CD833F-E(W)

Dome camera Ⅰ: DS-2CD752MF-E Dome camera Ⅱ: DS-2CD752MF-FB(H),DS-2CD752MF-IFB(H), DS-2CD762MF-FB(H),

DS-2CD762MF-IFB(H)

Dome camera Ⅲ: DS-2CD783F-E(I), DS-2CD754F-E(I), DS-2CD764FWD-E(I), DS-2CD754FWD-E(I),

DS-2CD753F-E(I), DS-2CD763PF(NF)-E(I), DS-2CD793PF(NF)-E(I), DS-2CD793PFWD(NFWD)-E(I), DS-2CD733F-E(I)

Bullet Camera: DS-2CD8264F-E(I), DS-2CD8264F-ES(I),DS-2CD8254F-E(I), DS-2CD8254F-ES(I),

DS-2CD8253F-E(I), DS-2CD8253F-ES(I)，DS-2CD8233F-E(I), DS-2CD8233F-ES(I)

Cube Camera: DS-2CD8153F-E(W)(I), DS-2CD8133F-E(W)(I) Mini Dome Camera: DS-2CD7164-E,DS-2CD7153-E, DS-2CD7133-E

This manual may contain several technical incorrect places or printing errors, and the content is subject to change without notice. The updates will be added to the new version of this manual. We will readily improve or update the products or procedures described in the manual.

DISCLAIMER STATEMENT

“Underwriters Laboratories Inc. (“UL”) has not tested the performance or reliability of the security

or signaling aspects of this product. UL has only tested for fire, shock or casualty hazards as outlined in UL’s Standard(s) for Safety, UL60950-1. UL Certification does not cover the performance or reliability of the security or signaling aspects of this product. UL MAKES NO REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.”

Quick Guide of Network Camera

2

Table of Contents

Chapter 1 Interface Description ............................................................................................................. 1

1.1 Box Camera Interface Description ......................................................................................................... 1

1.1.1 Box Camera Ⅰ ................................................................................................................ 1

1.1.2 Box Camera Ⅱ ................................................................................................................ 2

1.1.3 Box Camera Ⅲ ................................................................................................................ 3

1.2 Dome Camera Interface Description .................................................................................................... 4

1.2.1 Dome Camera Ⅰ ............................................................................................................ 4

1.2.2 Dome Camera Ⅱ ............................................................................................................ 5

1.2.3 Dome Camera Ⅲ ............................................................................................................ 6

1.3 Bullet Camera Interface Description ..................................................................................................... 6

1.4 Cube Camera Interface Description ...................................................................................................... 7

1.5 Mini Dome Camera Interface Description ........................................................................................... 8

Chapter 2 Search and Modify IP ............................................................................................................ 9

Chapter 3 Preview via WEB browser.................................................................................................... 12

Quick Guide of Network Camera

1

Chapter 1 Interface Description

1.1 Box Camera Interface Description

1.1.1 Box Camera Ⅰ

Figure 1.1.1

Serial NO.

Description

1

CS Lens mount

2

Back Focus Ring

3

Auto iris interface

4

10M/100M self-adaptive Ethernet interface

5

AUDIO IN: Audio input interface

AUDIO OUT: Audio output interface

6

SD: SD card slot

7

VIDEO OUT: Video output interface

8

Power supply

9

PWR: Power LED indicator

10

D+, D-: RS-485 interface

11

Ground

12

1A, 1B: Alarm output interface

13

IN, G: Alarm input interface

Quick Guide of Network Camera

2

1.1.2 Box Camera Ⅱ

Figure 1.1.2

Serial NO.

Description

1

CS Lens mount

2

Auto iris interface

3

Bracket mounting holes

4

F1+ F1-, F2+ F2- ,F3+ F3-: Alarm output interface

5

T1,T2,T3, T4,GND: Alarm input interface

6

D+, D-: RS-485 interface

7

10M/100M self-adaptive Ethernet interface

8

VIDEO OUT: Video output interface

9

RESET: Reset the camera

10

TXD, RXD, GND: RS-232 interface

11

Power supply

12

PWR: Power LED indicator

13

SD: SD card slot

14

AUDIO IN: Audio input interface

15

AUDIO OUT: Audio output interface

16

Ground

Quick Guide of Network Camera

3

1.1.3 Box Camera Ⅲ

Figure 1.1.3

Serial NO.

Description

1

Lens mount

2

Back Focus Ring

3

SD: SD card slot

4

Auto iris interface

5

10M/100M self-adaptive Ethernet interface

6

VIDEO OUT: Video output interface

7

AUDIO OUT: Audio output interface

8

PWR: Power LED indicator

9

Power supply

10

MIC IN: Audio input interface

11

D+, D-: RS-485 interface

12

IN, G: Alarm input interface

13

1A, 1B: Alarm output interface

14

Ground

15

RESET: Reset the camera

Quick Guide of Network Camera

4

1.2 Dome Camera Interface Description

1.2.1 Dome Camera Ⅰ

Figure 1.2.1

Serial NO.

Description

1

Video output interface

2

PWR: Power LED indicator

3

Dial switch

4

10M/100M self-adaptive Ethernet interface

5

D+, D-: RS-485 interface

6

Alarm IN: Alarm input interface

Alarm OUT: Alarm output interface

7

AIN: Audio input interface

AOUT: Audio output interface

8

Power supply

Quick Guide of Network Camera

5

1.2.2 Dome Camera Ⅱ

Figure 1.2.2

Serial NO.

Description

1

10M/100M self-adaptive Ethernet interface

2

AUDIO IN: Audio input interface

3

AUDIO OUT: Audio output interface

4

D+, D-: RS-485 interface

5

ALARM

IN, G: Alarm input interface

1A, 1B: Alarm output interface

6

Power supply

Quick Guide of Network Camera

6

1.2.3 Dome Camera Ⅲ

Figure 1.2.3

Serial NO.

Description

1

10M/100M self-adaptive Ethernet interface

2

INITIAL SET: Reset the camera

3

AUDIO OUT: Audio output interface

4

MIC IN: Audio input interface

5

D+, D-: RS-485 interface

6

1A, 1B, 2A, 2B: Alarm output interface

7

IN1, GND, IN2, GND: Alarm input interface

8

Power supply

1.3 Bullet Camera Interface Description

Figure 1.3.1

Quick Guide of Network Camera

7

Serial NO.

Description

1

10M/100M self-adaptive Ethernet interface

2

Power supply

3

IN, G: Alarm input interface

1A, 1B: Alarm output interface

4

D+, D-: RS-485 interface

5

AUDIO IN, G: Audio input interface

AUDIO OUT, G: Audio output interface

1.4 Cube Camera Interface Description

Figure 1.4.1

Serial NO.

Description

1

Microphone hole

2

Micro SD card solt

3

LINK: Network status LED indicator.

When the network is connected, the LED flickers in green.

4

Power LED indicator, It turns solid red when power is applied to the unit

5

Lens

6

ETHERNET: 10M / 100M self-adaptive Ethernet interface

7

RESET: Reset all parameters to factory default settings

8

Speaker hole

9

Power supply

10

Bracket mounting holes, used to fix the camera to the bracket

Quick Guide of Network Camera

8

1.5 Mini Dome Camera Interface Description

Figure 1.5.1

Serial NO.

Description

1

Back box

2

Lens

3

P: Power LED indicator, It turns solid red when power is applied to the unit.

4

Bottom board

5

Bottom board set screw hole

6

Lens set screw

7

S & L: Network status LED indicator.

When the network is connected, the “S” LED turns solid orange, while the “L” LED flickers in

green.

8

RESET: Reset all parameters to factory default settings.

Quick Guide of Network Camera

9

Chapter 2 Search and Modify IP

SADP (Search Active Devices Protocol) software can automatically search the IP address of network cameras in the same local area network (LAN) with connection diagram as following:

Figure 2.1

The operation of searching and modifying IP address is described as following:

 Description of SADP V 2.0

SADP (Search Active Devices Protocol) is a kind of user-friendly and installation-free online device search tool. It searches the active online devices within your subnet and displays the information of the devices. You can also modify the basic network information of the devices using this software.

 Search active devices online

 Search online devices automatically

After launch the SADP software, it automatically searches the online devices every 15 seconds from the subnet where your computer locates. It displays the total number and information of the searched devices in the Online Devices interface. Device information including the device type, IP address, port number, gateway, etc. will be displayed.

Quick Guide of Network Camera

10

Figure 2.2 Searching Online Devices

Note: Device can be searched and displayed in the list in 15 seconds after it went online; it will be

removed from the list in 45 seconds after it went offline.

 Search online devices manually

You can also click to refresh the online device list manually. The newly searched devices will be added to the list.

Note: You can click or on each column heading to order the information; you can click to

expand the device table and hide the network parameter panel on the right side, or click to show the network parameter panel.

 Modify network parameters

Steps:

1. Select the device to be modified in the device list and the network parameters of the device will be displayed in

the Modify Network Parameters panel on the right side.

2. Edit the modifiable network parameters, e.g. IP address and port number.

3. Enter the password of the admin account of the device in the Password field and click to save the

changes.

Quick Guide of Network Camera

11

Figure 2.3 Modify Network Parameters

 Restore default password

Steps:

1. Contact our technical engineers to get the serial code.

Note: Serial code is a series of characters combined by the start time and the serial number of the device.

2. Input the code in the Serial code field and click to restore the default password.

Quick Guide of Network Camera

12

Chapter 3 Preview via WEB browser

Note: The default IP of network cameras is ‘192.0.0.64’ with ‘admin’ as the administrator, ‘12345’ as

the password, and ‘8000’ as the default port.

For monitoring camera images, a computer running the Microsoft Windows Operating System and Internet Explorer (Version 6.0 or later) are required. In this manual, we take Windows XP and IE 6.0 for example. This chapter describes how to view the video from the camera via web browser, and operate as following:

Figure 3.1

1. Open the IE browser, set the security level to [Medium] in *Tools/InternetOptions/Security/Custom Level…+

Quick Guide of Network Camera

13

Figure 3.2

2. Input the IP address of the camera and press [Enter], and then click the dialog box that pops up.

Figure 3.3

3. Click [Run] to install the ActiveX control.

Quick Guide of Network Camera

14

Figure 3.4

4. Input “Username” (Default: admin), “Password” (Default: 12345) and “Port” (Default: 8000) of the camera, then click [Login]

Figure 3.5

5. View the image

Note: For detailed instructions of further configuration, please refer to the user manual of network

camera.

Quick Guide of Network Camera

15

First Choice for Security Professionals

HIKVISION DS-2CD862MF-E, DS-2CD877BF, DS-2CD886BF-E, DS-2CD886MF-E, DS-2CD876BF Quick Manual

Specifications and Main Features

Frequently Asked Questions

User Manual