HIKVISION DS-2CD2412F-I, DS-2CD2412F-IW, DS-2CD2432F-I, DS-2CD2432F-IW Quick Operation Manual

UD.6L0201B1191A01

Network Camera

Quick Operation Guide

Network Camera·Quick Operation Guide

1

1

Thank you for purchasing our product. If there are any questions,

or requests, please do not hesitate to contact the dealer.

About This Document:

This manual applies to DS-2CD2412F-I(W); DS-2CD2432F-I(W)

series cameras.

This manual may contain several technical incorrect places or

printing errors, and the content is subject to change without notice.

The updates will be added to the new version of this manual. We

will readily improve or update the products or procedures

described in the manual.

DISCLAIMER STATEMENT

“Underwriters Laboratories Inc. (“UL”) has not tested the

performance or reliability of the security or signaling aspects of

this product. UL has only tested for fire, shock or casualty hazards

as outlined in UL’s Standard(s) for Safety, UL60950-1. UL

Certification does not cover the performance or reliability of the

security or signaling aspects of this product. UL MAKES NO

REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS

WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY

OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS

PRODUCT.

0500051030809

Network Camera·Quick Operation Guide

2

2

Regulatory Information

FCC Information

FCC compliance: This equipment has been tested and found to

comply with the limits for a digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the

interference at his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation

EU Conformity Statement

This product and - if applicable - the supplied

accessories too are marked with "CE" and comply

therefore with the applicable harmonized

European standards listed under the Low Voltage Directive

2006/95/EC, the EMC Directive 2004/108/EC.

Network Camera·Quick Operation Guide

3

3

2002/96/EC (WEEE directive): Products marked

with this symbol cannot be disposed of as unsorted

municipal waste in the European Union. For proper

recycling, return this product to your local supplier

upon the purchase of equivalent new equipment, or dispose of it at

designated collection points. For more information see:

www.recyclethis.info.

Network Camera·Quick Operation Guide

4

4

Contents

1 Appearance Description ................................................ 5

2 Notice............................................................................ 8

3 Installation ................................................................. 10

4 Setting the Network Camera over the LAN .................. 15

5 Accessing via WEB browser ......................................... 20

Network Camera·Quick Operation Guide

5

5

1 Appearance Description

1
2

3

4

5

6

7

8

9

10

11

12

Figure 1-1 Overview

Table 1-1 Description

No.

Description

1

Lens

2

PIR(Passive Infrared) sensor

3

Microphone

4

Indicators

Alarm:

Solid red when the camera is armed;

Solid blue when the camera is

unarmed.

Network Camera·Quick Operation Guide

6

6

No.

Description

Status: Reserved

Link:

Flashing amber when network

connection is functioning properly;

Unlit when no network connection;

5

Infrared Light

6

SD Card Slot

7

10M / 100M self-adaptive Ethernet interface & PoE

8

WPS (Wi-Fi Protected Setup)/Reset Button

9

Alarm Input Interface

10

Ground

11

Alarm Output Interface

12

Power supply interface; (DC 12V)

 To reset the default parameters to the camera, you need to

press and hold the RESET button and power on the camera.

After the power on of the camera, you must still press and hold

the Reset button for about 10 seconds.

 The WPS button is an easy configuration protocol of Wi-Fi

settings. Press the WPS button on the camera and press the

Network Camera·Quick Operation Guide

7

7

WPS button on the wireless router, the camera can be easily

connected on line.