HID SmartID Configuration User Manual

15370 Barranca Parkway Irvine, CA 92618 USA

Generic Configuration Guide

SmartID

October 29, 2009

Summary

The Generic Configuration Guide contains open format configurations for pairing with SmartID, SmartTRANS and SmartTOUCH readers to create a complete reader solution.

Format configurations are an essential building block of the SmartID reader, and required for all SmartID reader orders. Through format configurations SmartID readers are tailored to customer requirements.

For reader customization beyond the generic configurations, reference the 13.56 MHz How to Order Guide, SmartID MIFARE and DESFire Reader Custom Format Request Form.

Formats are specific for one to many reader hardware and applications. Together, a hardware and application make up a part number (for example, Hardware SmartID Mullion + Application MIFARE = Part Number 8030DSCM) An application is the set of procedures downloaded inside of the reader that serves a specific purpose (for example, read a MIFARE or DESFire card, or accept serial commands for a host driven read/write application). A configuration is used by the application to adapt reader behavior to customer specific needs (for example, output a MIFARE card serial number in 26 bits only, read application 0x300 from a DESFire card, or configure a serial driven reader for a RS485 hardware interface.

Included in this document are format configurations for the following reader hardware and applications:

 SmartID and SmartTRANS HID MIFARE Application  SmartID, SmartTRANS and SmartTOUCH MIFARE Application  SmartID, SmartTRANS and SmartTOUCH DESFire Application  SmartID and SmartID Desktop with RS232, T=CL Application  SmartID Desktop with USB, PC/SC Application

™

D00844, A.4

August 27, 2009 Page 1 of 9

SmartID Generic Configuration Guide, D00844, A.4

Format Configurations

SmartID HID MIFARE Application

Applicable Part Numbers (Reader / Application):

 8030DSHC SmartID S10 Read Only Reader, HID MIFARE  8031DSHC SmartID SK10 Read Only Keypad Reader, HID MIFARE

Format Number

Card Read Mode

CSN Wiegand Output Mode

Beeper/LED Configuration

Keypad Output (if applicable)

Equivalent FlexSmart Part Suffix

02FM-0277

02FM-0278

02FM-0239

02FM-0242

02FM-0259

02FM-0260

02FM-0223

02FM-0224

02FM-0291

02FM-0292

02FM-0255

02FM-0256

02FM-0273

HID Data Only

HID Data or CSN

N/A

26 bit LSB

Beep OFF, Left LED normally OFF, Right LED GREEN on read on read

Beep OFF, Left LED normally RED, Right LED GREEN on read on read

Beep ON, Left LED normally OFF, Right LED GREEN on read on read

Beep ON, Left LED normally RED, Right LED GREEN on read on read

Beep OFF, Left LED normally OFF, Right LED GREEN on read on read

Beep OFF, Left LED normally RED, Right LED GREEN on read on read

Beep ON, Left LED normally OFF, Right LED GREEN on read on read

4-bit 607xAKN 03 0 0 0 0

8-bit 607xAKN 03 0 0 0 9

4-bit 607xAKN 01 0 0 0 0

8-bit 607xAKN 01 0 0 0 9

4-bit 607xAKN 02 0 0 0 0

8-bit 607xAKN 02 0 0 0 9

4-bit 607xAKN 00 0 0 0 0

8-bit 607xAKN 00 0 0 0 9

4-bit 607xAKN 03 2 2 0 0

8-bit 607xAKN 03 2 2 0 9

4-bit 607xAKN 01 2 2 0 0

8-bit 607xAKN 01 2 2 0 9

4-bit 607xAKN 02 2 2 0 0

August 28, 2009 Page 2 of 9

SmartID Generic Configuration Guide, D00844, A.4

Format Number

02FM-0274

02FM-0221

02FM-0222

02FM-0287

02FM-0288

02FM-0251

02FM-0252

02FM-0269

02FM-0270

02FM-0233

02FM-0234

02FM-0289

02FM-0290

02FM-0253

02FM-0254

02FM-0271

Card Read Mode

HID Data or CSN

CSN Wiegand Output Mode

26 bit LSB

32 bit LSB

32 bit MSB