HID R10-H, RP10-H, RP15-H, R15-H, R30-H Installation Manual

GOVERNMENT SOLUTIONS for Physical Access

R10-H, RP10-H, R15-H, RP15-H,
R30-H, RP30-H, R40-H, RP40-H,
RK40-H, RPK40-H, RKCL40-P,
RPKCL40-P, RKCLB40-P,
RPKCLB40-P

pivCLASS®

Reader

Installation Guide

PLT-01134 A.2

pivCLASS R10-H, RP10-H, R15-H, RP15-H, R30-H, RP30-H, R40-H, RP40-H, RK40-H,

RPK40-H, RKCL40-P, RPKCL40-P, RKCLB40-P, RPKCLB40-P

PLT-01134 A.2

Parts List

1 - Reader and base plate assembly
1 - Installation guide
2 - Terminal connector - terminal readers only

RKCL40, RPKCL40, RKCLB40, and RPKCLB40

4 - M3.5 mm x 12 mm phillips machine screw
4 - #6-32 x .375” phillips self-tapping machine screw
4 - #6 x 1.5” phillips sheet metal screw
3 - #6-32 x .4375” spanner security screw, anti-tamper (Black)
3 - #6-32 x .4375 phillips security screw (Black)
1 - Mounting Gasket

R10, RP10, R15, RP15, R30, RP30, R40, RK40, RP40, and RPK40

2 - M3.5 mm x 12 mm phillips machine screw
3 - #6-32 x .375” phillips self-tapping machine screw
2 - #6 x 1.5” phillips sheet metal screw
1 - #6-32 x .375” spanner security screw, anti-tamper
1 - Mounting gasket - (Optional)

Recommended

• Cable, 6 conductor, 22 or 24 AWG [65 mm or 51 mm]
(Belden 3108A or equivalent) - RS-485 + power

• Cable, 6 to 9 conductor, 22 or 24 AWG [65 mm or 51 mm]
(Alpha 1296C or equivalent) - Wiegand + power

• DC power supply

• Metal or plastic double-gang junction box - RPKCL40 / RPKCL40 /

RKCLB40 / RPKCLB40

• Metal or plastic single-gang junction box - R10 / RP10 / R15 / RP15 / R30 /
RP30 / R40 / RP40 / RK40 / RPK40

• Reader spacer when using metal junction boxes - see HID HTOG.

• Security tool (for spanner security screw, anti-tamper) HID 04-0001-03

Specifications

pivCLASS Protocol

PRODUCT BASE PART NUMBER INPUT VOLTAGE (VDC)

R10-H 900NHR

RP10-H 900PHR 75mA RP10Ex1x2x

R15-H 910NHR 60mA R15Ex1x2x

RP15-H 910PHR 75mA RP15Ex1x2x

R30-H 930PHR 65mA

RP30-H 930PHR 85mA RP30Ex1x2x

R40-H 920NHR 65mA R40Ex1x2x

RP40-H 920PHR 85mA RP40Ex1x2x

RK40-H 921NHR 85mA

RPK40-H 921PHR 95mA RPK40Ex1x2x

RKCL40-P 923NPR

RPKCL40-P 923PPR RPKCL40Ex1x2x

RKCLB40-P 924NPR

RPKCLB40-P 924PPR RPKCLB40Ex1x2x

1

 StandbyAVG-RMScurrentdrawwithoutacardintheRFeld.

2

Maximum AVG - RMS current draw during continuous PIV card reads. Not evaluated by UL.

3

Peak - highest instantaneous current draw during RF communication.

12VDC

Standby

Wiegand and OSDP Protocol

PRODUCT BASE PART NUMBER INPUT VOLTAGE (VDC)

R10-H 900N

RP10-H 900P 75mA RP10Ex1x2x

R15-H 910N 60mA R15Ex1x2x

RP15-H 910P 75mA RP15Ex1x2x

R30-H 930N 65mA

RP30-H 930P 85mA RP30Ex1x2x

R40-H 920N 65mA R40Ex1x2x

RP40-H 920P 85mA RP40Ex1x2x

RK40-H 921N 85mA

RPK40-H 921P 95mA RPK40Ex1x2x

RKCL40-P 923N

RPKCL40-P 923P RPKCL40Ex1x2x

RKCLB40-P 924N

RPKCLB40-P 924P RPKCLB40Ex1x2x

1

Communication protocols other than Wiegand or Clock
& Data require an additional hardware module which
increases current by 30 mA.

5-16VDC

12VDC for RS-485

12VDC

2

StandbyAVG-RMScurrentdrawwithoutacardintheRFeld.

3

Maximum AVG - RMS current draw during continuous PIV card reads. Not
evaluated by UL.

4

Peak - highest instantaneous current draw during RF communication.

5

Wiegand Cable Lengths:

100 ft (30.5 m) 22 AWG @ 5 - 6.4VDC

500 ft (152 m) 22 AWG @ 6.5 - 16VDC

Standby

CURRENT

Maximum

1

AVG

60mA

150mA 185mA 250mA

165mA 215mA 275mA

AVG

100mA

110mA

125mA 220mA

CURRENT

Maximum

2

AVG

60mA

150mA 185mA 250mA

165mA 215mA 275mA

AVG

100mA

110mA

125mA 220mA

PEAK

2

200mA

1

PEAK

3

200mA

OPERATING TEMPERATURE CABLE LENGTH UL REF NUMBER

3

-30° to 150° F
(-35° to 65° C)

-4° to 149° F

(-20° to 65° C)

RS-485 = 500 ft - 22 AWG
(152 m)
300 ft - 24 AWG
(91 m)

UL Reference Number Deciphering

x1 Reader Colors: K = Black, G = Gray

x2 Wiring: N = Pigtail, T = Terminal

x3 Communications: N = No Module, R = RS-485

OPERATING TEMPERATURE CABLE LENGTH

4

Communication Lines

Wiegand = 500 ft - 22 AWG

-30° to 150° F
(-35° to 65° C)

-4° to 149° F

(-20° to 65° C)

(152 m)
300 ft - 24 AWG
(91 m)
RS-485 = 4000 ft - 24 AWG
(1,219 m)

Wiegand and RS-485

500 ft - 22 AWG (152 m)
300 ft - 24 AWG (91 m)

5

UL REF NUMBER

UL Reference Number Deciphering

x1 Reader Colors: K = Black, G = Gray

x2 Wiring: N = Pigtail, T = Terminal

x3 Communications: N = No Module,

R = RS-485 (OSDP)

R10Ex1x2x

R30Ex1x2x

RK40Ex1x2x

RKCL40Ex1x2x

RKCLB40Ex1x2x

R10Ex1x2x

R30Ex1x2x

RK40Ex1x2x

RKCL40Ex1x2x

RKCLB40Ex1x2x

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

3

INSTALLATION GUIDE2

© 2012 - 2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.

PLT-01134 A.2

Mounting

R10-H, RP10-H, R15-H, RP15-H, R30-H, RP30-H, R40-H, RP40-H,

RPK40-H, RKCL40-P, RPKCL40-P, RKCLB40-P, RPKCLB40-P

pivCLASS

1

Attach Backplate and Mounting Gasket to Junction Box.

Contactless Models

Mounting holes for US single-gang
electrical boxes.

Install gasket for RK40 and RPK40
models.

Junction box not included.

Contact Models

© 2012 - 2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.

Mounting holes for US double-gang
electrical boxes.

Reverse Conguration Flipping the
backplate allows for placing the Contact
reader on left and the Keypad reader on right.

INSTALLATION GUIDE 3

pivCLASS R10-H, RP10-H, R15-H, RP15-H, R30-H, RP30-H, R40-H, RP40-H, RK40-H,

RPK40-H, RKCL40-P, RPKCL40-P, RKCLB40-P, RPKCLB40-P

Wiring

2

BEEP (YEL)

GRN LED (ORN)

GND (BLK)
+VDC (RED)

DRAIN (BARE)

RED LED (BRN)

HOLD (BLU)

GPIO1(RED/GRN)

GPIO2 (TAN)

OC/TMPR (VIO)

DATA1 (WHT)
DATA2 (GRN)
GPIO3 (PINK)
GPIO4 (GRAY)

18 in

(0.46 m)

Beeper

GRN LED

GND

+VDC

DRAIN

RED

HOLD

GPIO1
GP102
OC/TMPR
DATA1/CLK
DATA2/DATA
GPIO3
GPIO4

DRAIN

HOLD

RED

DATA2/DATA

GPIO3

GPIO4

GRN LED

Beeper

+VDC

GND

P1

GPIO1

GP102

OC/TMPR

DATA1/CLK

ELECTROSTATIC SENSITIVE DEVICES

P2

Note: Previous iCLASS readers had

PLT-01134 A.2

ATTENTION

Observe precautions for handling

reversed RS-485 wiring ( P2-7 &
P2-6 - A & B). When upgrading to
a pivCLASS reader, ensure proper

connectionsasdenedbelow.

Terminal ReaderPigtail Reader

(Module position varies)

(Terminal block and module

position varies)

Pigtail Terminal Description Pigtail Terminal Description

Yellow P1-1 Beeper Input Red / Green P2-7

Orange P1-2 LED Input (GRN) Tan P2-6

Black P1-3 Ground (RTN) Violet P2-5

Red P1-4 +VDC White P2-4

Drain P1-5 Unused Green P2-3

Brown P1-6 LED Input (RED) Pink P2-2

Blue P1-7 Hold Input Gray P2-1

Notes

1

RS-485 applicable for pivCLASS readers.

2

Tamper Output - When activated, output synchronizes to ground (default).

3

 Dependentuponreaderconguration.SeetheHTOGforWiegandandClock-in-Datacongurations.

GPIO1 (RS232-T / RS485-FDX/HDX-A) See Note 1

GPIO2 (RS232-R / RS485-FDX/HDX-B) See Note 1

Open Collector Output / Tamper See Note 2

Wiegand Data 1 / Clock See Note 3

Wiegand Data 0 / Data See Note 3

GPIO3 (RS485-FDX-Z) See Note 1

GPIO4 (RS485-FDX-Y) See Note 1

INSTALLATION GUIDE4

© 2012 - 2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.

PLT-01134 A.2

3

R10-H, RP10-H, R15-H, RP15-H, R30-H, RP30-H, R40-H, RP40-H,

RPK40-H, RKCL40-P, RPKCL40-P, RKCLB40-P, RPKCLB40-P

Attach to Backplate

Contactless Models

pivCLASS

Attach Reader

a

Contact Models

a

Install Security Screw

b

b

Default: Slide Reader Assembly
towards the right to lock.

© 2012 - 2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.

c

Reversed Conguration: Slide Reader
Assembly to the left to lock.

Contact Technical Support for wiring the

reverseconguration.

INSTALLATION GUIDE 5

pivCLASS R10-H, RP10-H, R15-H, RP15-H, R30-H, RP30-H, R40-H, RP40-H, RK40-H,

RPK40-H, RKCL40-P, RPKCL40-P, RKCLB40-P, RPKCLB40-P

Power & Testing

4

Contactless Models

Turn on power

Test card

PLT-01134 A.2

Contact Models

Turn on power

Test card

INSTALLATION GUIDE6

© 2012 - 2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.

PLT-01134 A.2

R10-H, RP10-H, R15-H, RP15-H, R30-H, RP30-H, R40-H, RP40-H,

RPK40-H, RKCL40-P, RPKCL40-P, RKCLB40-P, RPKCLB40-P

pivCLASS

Intentionally Blank

© 2012 - 2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.

INSTALLATION GUIDE 7

UL

Connect only to a Listed Access Control / Burglary power-limited power supply. These readers are intended to be used with listed (UL294) control equipment.

RKCLB40-P and RPKCLB40-P readers are suitable for indoor use. R10-H, RP10-H, R15-H, RP15-H, R30-H, RP30-H, R40-H, RP40-H, RK40-H, RPK40-H, RKCL40-P and
RPKCL40-P are suitable for outdoor use.

Evaluated for use over Wiegand and RS-485 communications.

Evaluated for use with the M2000 pivCLASS Authentication Module as well as Standard Wiegand and OSDP panels.

FCC Certification

CAUTION: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

© 2012 - 2014 HID Global Corporation/ASSA ABLOY AB. All rights reserved.

HID Global

North America: [phone]
Toll Free: 1 800 237 7769
Europe, Middle East, Africa: [phone]
Asia Pacific: [phone]
Latin America: [phone]

Equipment

8T29

ACC Control READER

General Signaling

Equipment

HID, HID Global and pivCLASS are the trademarks or registered trademarks of HID
Global Corporation, or its licensors, in the U.S. and other countries.

PLT-01334 A.1

Patent Pending

Check reader label for current regulatory approvals.

support.hidglobal.com

hidglobal.com