HID OMNIKEY Smart Card Reader Assembly Procedure User Manual

found in the reader back.

round opening and press until it snaps.

at the back ensures stable assembly.

Weight Information:

Standard Standing Base: Heavy Standing Base Jumbo Standing Base

the U.S. and other countries.

15370 Barranca Parkway Irvine, CA 92618

1.09 oz ( 31 g)

Base Models: 3121, 5127 CK, 3111, 5121, 5125

ASSEMBLY PROCEDURE

with Middle Piece: 3.52 oz (100 g)

with Middle Piece: 15.2 oz (431 g)

Standard Vertical Mounting

Pull the cable through the cut-out

Place the cable in the base cut-out. Tuck the reader using the guide bars into the

OMNIKEY®

Smart Card Reader

3121-914, Rev A.0

April 2012

Lift off the pad (reader back) for use without the base.

After removing the blue foil, attach the reader to a monitor, etc.

Place the middle piece on the base. The upper and base parts fit together when matching both cut-outs.

HID GLOBAL, HID, the HID logo, and OMNIKEY ar e the trademarks or registered trademarks of HID Global Corporation, or its licensors, in

After removing the adhesion pad, the round opening has a counterpart on the base assembly. A small guidance bar