HID OMNIKEY 3021, OMNIKEY 4121, OMNIKEY 3121, OMNIKEY 4040, OMNIKEY 5121 Installation Manual

© 2010 – 2011 HID Global Corporation - All rights reserved.

Base Models: 1021, 3021, 3121, 4040, 4121,

4321, 5121, 5125, 5127, 5321,
5325, 5326, 6121, 6221, 6321.

Drivers and Manuals:

http://www.hidglobal.com/omnikey

North America

15370 Barranca Parkway
Irvine, CA 92618
USA

Asia Pacific

19/F 625 King’s Road
North Point, Island East
Hong Kong

Europe, Middle East & Africa

Phoenix Road
Haverhill, Suffolk CB9 7AE
England

support.hidglobal.com

Installation Guide

OMNIKEY

®

Smart Card Readers

3121-906-ENEN, A.7

OMNIKEY® Smart Card Reader Installation Guide

2 © 2010 – 2011 HID Global Corporation - All rights reserved.

Introduction

This guide describes physical behavior and conformities of the OMNIKEY® Smart Card
Reader family.

1021 USB – Desktop smart card reader in a small form factor for desktop and mobile
usage.

3021 USB – High-performance smart card reader, with a USB interface and small form
factor for desktop and mobile usage.

3121 USB – High-performance smart card reader for desktop use with multiple standing
base options in a robust housing.

4040 Mobile PCMCIA – High-performance smart card reader for mobile use in laptops
and PDAs with PCMCIA interface.

4121 CL - Mobile ExpressCard 34mm – Contactless Reader with ExpressCard™
interface for Laptops and mobile devices that reads/writes to 13.56 MHz smart cards.

4321 Mobile ExpressCard 54 – High-performance smart card reader for mobile use in
laptops and mobile devices with the ExpressC ard™ interface.

5125 / 5325 USB Prox – Dual interface PC-linked reader that reads contactless (125kHz)
HID Prox cards and reads/writes virtually any contact smart card.

5121 / 5321 USB – Dual interface PC-linked reader that reads/writes to both 13.56 MHz
contactless cards and virtually any contact smart card.

5127 CK USB – Contactless 13.56MHz/125kHz reader with CCID/Keyboard wedge
interface.

5321 CL USB – Contactless Reader with USB interface for desktop use that reads/writes
to 13.56 MHz smart cards.

5321 CL SAM USB – Dual interface PC-linked reader that reads/writes to both 13.56 MHz
contactless cards and virtually any SIM-sized contact smart card.

5326 DFR USB – Contactless Dual Frequency (13.56MHz/125kHz) Reader with CCID
interface.

6121 Mobile USB – Dongle-sized smart card reader for SIM-sized smart cards, especially
well suited for use with mobile devices.

6221 USB – Dongle-sized reader for SIM-sized smart cards and Micro-SD cards,
especially well suited for use with mobile devices.

6321 Mobile USB – Dongle-sized Dual interface PC linked reader that reads/writes to

13.56 MHz contactless smart card and virtually any SIM-sized contact smart card.

Parts

• Smart Card Reader

• Installation Guide

Find drivers, reader documentation supporting various operating systems at

http://www.hidglobal.com/omnikey.

See the application note for card loading and handling instructions at

http://www.hidglobal.com/omnikey.

Installation Guide OMNIKEY® Smart Card Reader

© 2010 – 2011 HID Global Corporation - All rights reserved. 3

Specifications and Installation

For further information, contact HID support: http://support.hidglobal.com/.
For driver setup, consult the OMNIKEY Smart Card User Guide

(http://www.hidglobal.com/documents/ok3121_userguide_ins_en.pdf).
CAUTION: Install the drivers prior to attaching the OMNIKEY reader with the computer.

USB Connected Reader Specifications

Operating Temperature

0°-55°C / 32°-131°F

PC Connector Cable

180 cm / 70.9 in
(150 cm / 59,1 in - Models 1021 & 3021)

Meantime between Failure (MTBF)

500,000 Hours

Host Interface

USB 2.0 CCID (USB 1.1 Compatible)

Host Data Transmission Speed

12 Mbps (USB 2.0 Full Speed)

Power Supply

Bus Powered

USB Connected Reader Installation

1. Connect the reader with your computer; plug the USB connector into your
computers USB port.

2. When the reader is operational, the LED illuminates.

3. For contactless operation, hold the card next to the reader logo. For contact
smart cards, insert the card into the reader with contacts facing up.

4. When the reader is exchanging data with a card (reading/writing), the LED blinks.

PCMCIA and ExpressCard Reader Specifications

4321

4121 CL

4040

Operating Temperature

0°-55°C / 32°-131°F

Meantime between Failure (MTBF)

500,000 Hours

Host Interface

ExpressCard

54 mm

ExpressCard

34mm

PCMCIA

Host Data Transmission Speed

12 Mbps

16 Mbps

Power Supply

Bus Powered

PCMCIA

PCMCIA and ExpressCard Reader Installation

1. Insert the reader into the compatible interface slot of your Notebook or mobile
device.

2. If the reader is operational, observe the reader in your operating system’s Device
Manager.

3. For contactless operation, hold the card next to the logo on the reader. For
contact smart cards, insert the card into the reader with contacts facing up.

OMNIKEY® Smart Card Reader Installation Guide

4 © 2010 – 2011 HID Global Corporation - All rights reserved.

Regulatory

FCC / Canada Radio Certification

CAUTION: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.

This device complies w i th par t 15 of the FCC Rules. Oper ati on is subject to the followi ng tw o
conditions: (1) This devi c e m ay not ca us e harmful interference, and ( 2) thi s d evi c e m ust ac cept any
interference received , i ncl udi ng interference that may caus e u ndesi r ed oper at ion.

This device complies w i th Industry Canada license-exempt RSS standard(s ) . Oper at ion is subject to
the following two conditions:

(1) This device may not caus e interference, and
(2) This device must accep t any i nterference, including interference that may cause undesired

operation of the devic e.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

CE Marking

HID Global hereby declares that these products are in compliance with the essential requirements
and other relevant provisions of the applicable Directives. A DoC copy can be found at

http://certifications.hidglobal.com.

Nur in Verbindung mit zertifiziertem PC.

Taiwan

According to "Administrative Regulations on Low Power Radio Waves Radiated Devices"
Without permission granted by the DGT, any company, enterprise, or user is not allowed to
change frequency , en hance transmittin g pow er or al ter or i ginal characteristi c as well as
performance to a approved low power radio-frequency devices. The low power radio-frequency
devices shall not influence aircraft security and interfere legal communications; If found, the user
shall cease operating immediately until no interference is achieved. The said legal
communications means radio communications is operated in compliance with the
Telecommunications Act. The low power radio-frequency devices must be susceptible with the
interference from legal communications or ISM radio wave radiated devices.

Singapore

Approved by IDA for use in Singapore. DA103548

Japan ITE

この装置は総務省の型式指定を受けています。
本製品は電波を使用したRFID機器の読み取り・書き込み装置です。

そのため使用する用途・場所によっては、医療機器に影響を与える恐れがあります。

Korean