1
Pull open the ribbon cartridge door.
3
Remove the brace from the ribbon cartridge.
4
Insert ribbon cartridge.
5
Close ribbon cartridge door.
1
2
6
11
For a printer using USB, do not connect the
USB cable at this time. The USB cable is
connected during driver installation.
7 8
Insert cards.
9
Close card hopper door.
2
Pull liner tab.
12
Follow the on-screen instructions for
installing the printer driver.
1
2
3
10
1) Connect AC power cable to
power supply.
2) Insert the opposing AC power
cable end into the AC outlet.
3) Connect power supply to
printer.
ACCESS versatility.
FARGO® DTC 000
A
C
Card Printing & Encoding
Direct-to-Card Printer
Installation Guide
L001479-01, 1.0
For additional information, visit fargo.hidglobal.com
This Quick Start Guide is for informational purposes only. HID makes no warranties, expressed or implied, in this
summary. Company, product names and data used in sample output are ctitious. Specications are subject to
change without notice.
HID GLOBAL, HID, the HID logo and Fargo are the trademarks or registered trademarks of HID Global Corporation, or
its licensors, in the U.S. and other countries.
© 2010 HID Global Corporation. All rights reserved.
1) Release door lock and open door.
2) Press lever locking card platform.
Open output hopper door.
• Power Supply
• US Power Cord
• European Power Cord
• Declaration of Conformity
• Swift ID
• Software Installation CD (includes
Printer Driver User Guide and Fargo
Workbench Printer Utility)
Included with your printer are the following items:
Microsoft, Windows and the Windows logo
are trademarks, or registered trademarks of
Microsoft Corporation in the United States and
other countries.
Loading...