Operating instruction for the CS 434
The E-Stop
1.Insert battery in to the E-Stop Module
2.Push the start button to allow the operator of the equipment to operate.
3.If there is an emergency push the red button and the RF Module will send a stop signal. The equipment will be disabled
4.To restart operations push the start button to allow the equipment to continue.
5.Best operated by a Forman or a safety officer.
The module is inside of a sealed system. It takes no external or internal maintenance.
FCC ID: LW9-CS434-TX
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.