EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY
DAMAGE, PERSONAL INJURY, OR DEATH.
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of
this or any other appliance.
Installation and service must be performed by a qualified installer or service agency.
DO NOT REPAIR, REPLACE OR REMOVE ANY PART OF THE APPLIANCE UNLESS
SPECIFICALLY RECOMMENDED IN THE MANUAL. IMPROPER INSTALLATION,
SERVICE OR MAINTENANCE CAN CAUSE INJURY OR PROPERTY DAMAGE. REFER
TO THIS MANUAL FOR GUIDANCE. ALL OTHER SERVICING SHOULD BE DONE BY A
QUALIFIED TECHNICIAN.
READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY
BEFORE INSTALLING OR USING YOUR APPLIANCE TO REDUCE
THE RISK OF FIRE, BURN HAZARD, OR OTHER INJURY. KEEP
THIS MANUAL FOR FUTURE REFERENCE.
SAFETY DEFINITIONS
DANGER. THIS INDICATES INFORMATION AND WARNINGS WHICH,
IF NOT OBSERVED, MAY COMPROMISE PERSONAL SAFETY OR DAMAGE
THE APPLIANCE.
DANGER OF ELECTROCUTION. THIS INDICATES INFORMATION AND
WARNINGS OF AN ELECTRICAL NATURE WHICH, IF NOT OBSERVED,
MAY COMPROMISE PERSONAL SAFETY OR DAMAGE THE APPLIANCE.
THIS HIGHLIGHTS GENERAL INFORMATION AND WARNINGS AND
INDICATES THAT DAMAGE TO THE APPLIANCE OR PROPERTY MAY
OCCUR AS A RESULT OF NOT OBSERVING THIS WARNING.
INSTALLER: LEAVE THIS MANUAL WITH THE OWNER OF THE APPLIANCE.
HOMEOWNER: RETAIN THIS MANUAL FOR FUTURE REFERENCE.
Hestan’s award-winning culinary innovations and purpose-built features reinvented
the restaurant kitchen and redefined culinary experience in some of America’s most
acclaimed restaurants. Hestan now takes this performance from the back of the
house and puts it front and center in yours. Thoughtfully designed and meticulously
built, Hestan will serve you beautifully for years to come.
Hestan is the only residential brand born from the dreams and demands of
professional chefs. From ranges to refrigeration, every detail is designed to deliver the
performance and reliability expected in a restaurant – now available for you.
We appreciate you choosing Hestan, and we promise to deliver the very best to you.
When properly cared for, your Hestan appliance will provide safe, reliable service for many
years. When using this appliance, basic safety practices must be followed as outlined below.
EN
IMPORTANT: Save these instructions for the local Utility Inspector’s use.
INSTALLER: Please leave these Installation Instructions with the owner.
OWNER: Please retain these Installation Instructions for future reference.
This appliance is NOT designed for installation in manufactured (mobile) homes or
recreational park trailers. Do NOT install this appliance outdoors.
ELECTRICAL SHOCK HAZARD
Disconnect power before installing or servicing appliance. Before turning
power ON, be sure all controls are in the OFF position. Failure to do so can
result in death or electrical shock.
ELECTRICAL GROUNDING
• This appliance must be grounded. Grounding reduces the risk of electric shock in the
event of a short circuit. Read the ELECTRICAL CONNECTIONS section of this manual
for complete instructions.
• DO NOT ground to a gas pipe.
• DO NOT use an extension cord with this appliance.
• DO NOT have a fuse in the NEUTRAL or GROUNDING circuit. A fuse in the NEUTRAL
or GROUNDING circuit could result in an electrical shock.
KRPR36Bottom Mount Refrigerator, Top Compressor, Pro, Right Hinged, 36"
KRPL36Bottom Mount Refrigerator, Top Compressor, Pro, Left Hinged, 36"
KRPR36-XX Bottom Mount Refrigerator, Top Compressor, Pro, Color, Right Hinged, 36"
KRPL36-XX Bottom Mount Refrigerator, Top Compressor, Pro, Color, Left Hinged, 36"
KRBR36Bottom Mount Refrigerator, Bottom Compressor, Right Hinged, 36"
KRBL36Bottom Mount Refrigerator, Bottom Compressor, Left Hinged, 36"
KRBR36-OV Bottom Mount Refrigerator, Bottom Compressor, Overlay, Right Hinged, 36"
KRBL36-OV Bottom Mount Refrigerator, Bottom Compressor, Overlay, Left Hinged, 36"
KRBR36-XX Bottom Mount Refrigerator, Bottom Compressor, Color, Right Hinged, 36"
KRBL36-XX Bottom Mount Refrigerator, Bottom Compressor, Color, Left Hinged, 36"
KRCR24Refrigerator Column, Right Hinged, 24"
KRCL24Refrigerator Column, Left Hinged, 24"
KRCR24-OV Refrigerator Column, Overlay, Right Hinged, 24"
KRCL24-OV Refrigerator Column, Overlay, Left Hinged, 24"
KRCR24-XX Refrigerator Column, Color, Right Hinged, 24"
KRCL24-XX Refrigerator Column, Color, Left Hinged, 24"
KRCR30Refrigerator Column, Right Hinged, 30"
KRCL30Refrigerator Column, Left Hinged, 30"
KRCR30-OV Refrigerator Column, Overlay, Right Hinged, 30"
KRCL30-OV Refrigerator Column, Overlay, Left Hinged, 30"
KRCR30-XX Refrigerator Column, Color, Right Hinged, 30"
KRCL30-XX Refrigerator Column, Color, Left Hinged, 30"
Description
FREEZER MODELS
Model No.
KFCR24Freezer Column, Right Hinged, 24"
KFCL24Freezer Column, Left Hinged, 24"
KFCR24-OV Freezer Column, Overlay, Right Hinged, 24"
KFCL24-OV Freezer Column, Overlay, Left Hinged, 24"
KFCR24-XX Freezer Column, Color, Right Hinged, 24"
KFCL24-XX Freezer Column, Color, Left Hinged, 24"
KFCR30Freezer Column, Right Hinged, 30"
KFCL30Freezer Column, Left Hinged, 30"
KFCR30-OV Freezer Column, Overlay, Right Hinged, 30"
KFCL30-OV Freezer Column, Overlay, Left Hinged, 30"
KFCR30-XX Freezer Column, Color, Right Hinged, 30"
KFCL30-XX Freezer Column, Color, Left Hinged, 30"
KWCR24Wine Column, Right Hinged, 24"
KWCL24Wine Column, Left Hinged, 24"
KWCR24-OV Wine Column, Overlay, Right Hinged, 24"
KWCL24-OV Wine Column, Overlay, Left Hinged, 24"
KWCR24-XX Wine Column, Color, Right Hinged, 24"
KWCL24-XX Wine Column, Color, Left Hinged, 24"
KRWR24Refrigerator with Wine, Right Hinged, 24"
KRWL24Refrigerator with Wine, Left Hinged, 24"
KRWR24-OV Refrigerator with Wine, Overlay, Right Hinged, 24"
KRWL24-OV Refrigerator with Wine, Overlay, Left Hinged, 24"
KRWR24-XX Refrigerator with Wine, Color, Right Hinged, 24"
KRWL24-XX Refrigerator with Wine, Color, Left Hinged, 24"
NOTE: -XX indicates color model.
-BK for Stealth - Black
-YW for Sol - Yellow
-PP for Lush - Purple
-GG for Pacific Fog - Graphite Gray
-WH for Froth - White
-OR for Citra - Orange
-BU for Prince - Blue
EN
-RD for Matador - Red
-BG for Tin Roof - Burgundy
-GR for Grove - Green
-TQ for Bora Bora - Turquoise
RATING LABEL
The rating label contains important information about your
Hestan appliance such as the model and serial number and
electrical rating.
The rating label is located on the inside wall of the refrigerator.
HESTAN COMMERCIAL CORP.
ANAHEIM, CA - USA
ozFridge Gas Fill Charge
7
Quantité de Gaz Réfrigerateur
Freezer Gas Fill Charge
Quantité de Gaz Congélateur
Total Absorbed Current
Courant Absorbée Totale
Voltage
Tension
Frequency
Frequence
Refrigerant Gas Type
Type de Gaz Rèfrigerant
Made in Italy
TYPICAL RATING LABEL
MODEL
KRP36
0
CODE
A
1
FI24RC-RO
SER.NO./N° SERIE
V
115
F20160725000001
Hz
60
R134a
3186660
ETL LISTED
CONFORMS TO
ANSI/UL STD 250
CERTIFIED TO CAN/CSA
STD C22.2 NO.63
REGULATORY / CODE REQUIREMENTS
Installation of this refrigeration appliance must be made in accordance with local codes. In the
absence of local codes, this unit should be installed in accordance with the National Electrical
Code and local codes.
This appliance must be electrically grounded in accordance with local codes or in the absence
of local codes with the National Electrical Code
If this appliance is replacing an existing appliance which must
be removed or disposed of, make sure that it does not become a
dangerous trap for children by cutting its power supply cable and
rendering it impossible to close the door. Use the same caution
at the end of the lifespan of the new appliance.
This appliance is designed to refrigerate beverages and foods and
is intended for domestic use.
The appliance must be installed by following the instructions in the
Installation Guide, particular care should be taken not to obstruct the
vent openings of the appliance and of the built-in units.
The appliance features a concentrated lighting system with LED
lamps. Do not stare into these lamps when they are on to avoid
possible eyesight damage.
This warning is also contained on the label attached to the inside of
the refrigerator door.
When the freezer is functioning do not touch the inner surfaces in
stainless steel with wet or damp hands, since skin may stick to the
very cold surfaces.
Do not use any type of electrical equipment inside of the food
conservation compartments.
When positioning the shelves, do not place ngers in the shelf
slide guides.
Important
Directions for avoiding
appliance damage
Warning
Indications for avoiding injury
to people
CARING FOR THE ENVIRONMENT
Pay special attention to correct disposal procedure for all the
packaging materials.
Do not position containers of ammable liquids near the appliance.
Completely switch off the appliance and unplug the power supply
cable during cleaning operations. If the plug is not easily reached, it
is a good idea to turn off the breaker or remove the fuse that controls
the socket that the appliance is connected to.
The packaging parts can be dangerous for children: do not allow
children to play with the plastic bags, plastic lm or Styrofoam.
Any repairs must be performed by a qualied Hestan Service
technician.
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or lack of experience and knowledge
unless they have been given supervision or instruction concerning use of
the appliance by a person responsible for their safety. Children should
be supervised to ensure that they do not play with the appliance.
Do not damage the appliance refrigerant circuit pipes.
Do not store explosive substances such as aerosol cans with a
ammable propellant in this appliance.
The appliance must not be disposed of with urban waste. Contact
local waste disposal centers for on how to dispose of recyclable waste.
Prior to disposal, cut the power supply cord and make it impossible
to close the door.
During disposal, avoid damage to the electronics.
The appliance does not contain hazardous substances for the atmospheric
ozone layer, neither in the electronics nor in the insulation.
Failure to follow the instructions regarding sanitizing can compromise
the hygienic safety of the water dispensed.
When using the appliance for the rst time and every time the lter
is changed, it is recommended to let the water ow in the circuit using
the “Manual Cleaning” and discard the ice produced in the rst 24
hours.
Clean the ice bucket or drawer regularly using only drinking water.
The lter must be changed when indicated on the control panel
or when the ice/water dispenser has not been used for more than 30
days.
With each lter replacement, sanitize the ice and/or water distribution
system using a food grade disinfectant (with sodium hypochlorite),
which does not alter the characteristics of the materials. Rinse with at
least 1/2 gallon of water before use.
Only original spare parts supplied by the manufacturer should be
used when replacing components in the ice and water dispenser.
Any work on the appliance must be carried out by a qualied technician.
The electronic control system on your Hestan refrigerator maintains constant temperature in both
compartments and displays the measured temperature on the control panel. It also allows the user
to personalize settings of the various functions and provides alerts should a malfunction occur.
1
2
3
4
On/Off
Fridge
Menu
Up/Down
Fridge
Switches the appliance (all compartments) between ON and
Stand by (Tap for three seconds).
Allows you to switch off the refrigerator compartment and
leave the FreshZone freezer compartment on (Tap for three
seconds).
Allows access to the control panel menu to change the
appliance’s various settings.
Up/Down - refrigerator: Tap the refrigerator Up and Down
keys, to change the refrigerator temperature setting or to
navigate through the control panel menu.
EN
5Display
6
7Enter
8Ice maker
9Alarm
Up/Down
Freezer
(Fresh
Zone)
Display: Shows the temperature of the refrigerator and freezer
compartments, the date and time, control panel menu and
various other messages.*
Up/Down - freezer (FreshZone): Tap the freezer Up and Down
keys, to change the FreshZone freezer compartment keys to
change temperature setting.
Tap to conrm selections made in the control panel menu.
Tap to turn the ice maker on or off.
Flashes to signal user alerts such as door being left open in
combination with a warning tone. Tap this key to deactivate
the warning tone.
Switches the appliance (all compartments) between ON and
Stand by (Tap for three seconds).
Allows access to the control panel menu to change the
appliance’s various settings.
Up/Down - Refrigerator: Tap the refrigerator Up and Down
keys, to change the refrigerator temperature setting or to
navigate through the control panel menu.
Display: Shows the temperature of the refrigerator and freezer
compartments, the date and time, control panel menu and
various other messages.*
Up/Down - Freezer: Tap the freezer Up and Down
keys, to change the refrigerator temperature setting or to
navigate through the control panel menu.
Tap to conrm selections made in the control panel menu.
Flashes to signal user alerts such as door being left open in
combination with a warning tone. Tap this key to deactivate
the warning tone.
Freezer compartment that
can be transformed into a
refrigerator or FreshZone
compartment
When the appliance is rst
turned on the FreshZone
compartment is set to the
freezer mode
GETTING TO KNOW YOUR REFRIGERATOR
CONTROL PANEL (KWC / KRW MODELS)
123456798
(continued)
EN
1
On/Off
Allows complete shutdown and start-up of the appliance
(press for three seconds).
2
Wine Cellar
Allows switching on and off the Wine Cellar compartment
(press the button for 3 seconds)
3
4
5
6
7
Menu
Upper Wine
Zone
Display
Lower
Fresh Zone
Enter
Allows access to the appliance functions menu.
Use the Up and Down buttons to change the set temperature
of the upper zone and scroll through the interactive menu.
Displays the temperature of the Wine Cellar and Fresh Zone,
the date and time, Menu functions and visual messages.
Use the Up and Down buttons to change the selected function
of the lower Fresh Zone (Freezer, Refrigerator or Fresh)
Conrms activation or deactivation of the selections made in
Menu.
8
9
Alarm
Light
Blinks to signal possible malfunctioning, also through a sound
that can be deactivated by pressing the Alarm button.
Allows illumination of the Wine Cellar interior when the door
is closed. Once activated, the light remains on for 6 hours, then
automatically shuts off.
10
11
12
13
Display
Wine Zone
Reserve
(temperature)
Wine Zone
Reserve
(On/Off )
Humidity
10
11
1213
Displays the temperature of the Wine Reserve compartment,
Menu functions and visual messages.
Use the Up and Down buttons to change the set temperature
of the Wine Reserve compartment.
Allows switching On and Off of the Wine Reserve compartment.
(Press for 3 seconds)
Allows adjustment of humidity in the Wine Reserve compartment
to three levels. Press the button for each: High, Medium or Low.
When the appliance is connected to the electrical power supply but has
not yet been switched on, the display shows the “Stand by” message
This is a safety message to warn that the appliance is connected to the
main power and all the control panel is off.
To switch on all the appliance compartments, press the Power button
for three seconds.
When the appliance is rst turned on the Fresh Zone compartment is set
to the “freezer” mode. After switching on it remains always on and can
be switched off only by switching off the complete appliance.
Press Power for three seconds.
Use the same buttons to restart.
The freezer compartment always stays on and cannot be switched off
except by completely switching off the appliance by pressing the Power
button for three seconds.
During long absence periods it is recommended to switch off the
refrigerator by pressing the Power button for three seconds and
disconnecting the electrical plug or the appropriate circuit breaker.
Completely empty the refrigerator, clean and dry it and leave the door
and drawer partially open to prevent unpleasant odors.
If at the rst startup the Standby message does
not appear, but another message appears, it
means that the appliance has already started
the cooling process. If this is the case, deactivate
any possible sound signal by pressing the Alarm
button, close the door and wait until the set
temperature is reached.
During the rst startup, it will not be possible to
use the Menu to modify the factory settings until
the preset temperature has been reached.
Each time the appliance is switched on it goes
through a self-diagnosis procedure lasting three
minutes before completely starting up.
If only the refrigerator or wine compartment is
turned off, the specic fan will continue to operate
to prevent the formation of unpleasant odors and
mold.
Before turning off the appliance for a long period
of time, remove all of the items inside and leave
the door and drawer open to prevent the
formation of unpleasant odors and mold.
Each model has been carefully tested before leaving the factory and is adjusted in such a
way to ensure high performance and low consumption. Usually, it is not necessary to modify
the settings. Nevertheless, according to special needs, it is possible to modify the set
Nevertheless, according to special needs, it is possible to modify the set temperatures as
follows:
Refrigeration
Compartment
Freezer
Compartment
(Fresh Zone)
The temperature shown can vary slightly in
respect to the set temperature following frequent
openings of the doors or insertion of room
temperature foods or large quantities of foods.
From +1°C to +7°C (from 34°F to 46°F), the recommended preset
temperature is +4°C (39°F).
To adjust the temperature use the Up/Down buttons . Upon touching
these buttons the newly set temperature will appear in the display. To
modify this temperature, use the buttons until reaching the desired temperature.
From -13°C to -23°C (from 9°F to -11°F), the recommended temperature
is preset at -18° (-1°F).
To adjust the temperature use the Up/Down buttons
these buttons the newly set temperature will appear in the display. To
modify this temperature, use the buttons until reaching the desired
temperature.
In case the compartment is used as refrigerator or Fresh Zone compartment
(Fresh Zone function) the recommended and preset temperatures will
correspond to those indicated for the respective compartments.
. Upon touching
EN
6 to 12 hours are necessary to reach the selected
temperature.
ACTIVATING THE ICE MAKER
The Ice Maker button located on the main control panel permits
activation of the automatic icemaker.
The button is illuminated when the icemaker is functioning.
A prewash of the water circuit should be performed before activating
the Ice Maker for the rst time. To do this touch at the same time
buttons Enter and Ice Maker
After a few minutes the Ice Maker can be activated.
Do not activate the Ice Maker until the
water line is properly connected.
For freezer models
.
DISPLAY INFORMATION AND MALFUNCTION MESSAGES
An integrated control system provides information through light signals or
text messages visualized on the display.
The information signal is always visualized with a xed text message, while
a malfunction signal is visualized with blinking text. The sound signal that
accompanies some malfunction signals can be deactivated by pressing
the Alarm button
The list of malfunction signals is located at the back of this manual.
To prevent an inadvertent change
to the settings the keypad is
automatically locked after a certain
period of time. To reactivate the
Menu function, press the Menu
button and the Down button
simultaneously for three seconds.
The key lock can be disabled through
the specic function in the Settings
menu.
SPECIAL FUNCTIONS
Max Cool
It is possible to customize the functions of your appliance to adapt
it to diverse usage needs, resetting the main parameters (Settings) or
activating special functions.
Functions are accessed on the main display by pressing the Menu
button .
The Up/Down buttons permit navigation of the available functions,
which can be selected by pressing the Enter button
the current function status.
Using the Up/Down buttons , it is also possible to scroll through the
selected function’s sub-menu if applicable, activating or deactivating
by pressing the Enter button
Once the function is conrmed, the display will automatically
step back to the main menu to allow selection of other functions.
At any time it is possible to return to the previous selection through the
Menu button.
The language of the messages appearing on the display can be
changed by operating as follows:
Enter the Menu by pressing the Menu button
the Up/Down buttons
Language function and the desired language.
To use special functions, select the Menu button
button
The function lowers the refrigerator temperature to +2°C (35.6°F) for
12 hours, permitting more rapid cooling of food that has just been
placed in. Once the 12 hours have expired, the function deactivates
automatically, returning to the previously set temperature. It is possible to program a timed activation of the function. After a prolonged
interruption of electrical current, it is necessary to reactivate the function.
to access the menu, conrming the selection
and conrm via Enter
.
and use the Up/Down
. The display shows
select Settings via
. Then select the
.
How to activate
How to deactivate
How to program timed activation
It is possible to program the function with a delay of 1 to 12 hours.
HOLIDAY FRIDGE
The various Max Cool Modes help prepare the cooling,
Fridge and Fresh Zone compartments for the introduction
of a heat load which can consist of fresh food or other
items which may have warmed during transport. The
more quickly an item can be cooled or frozen the better
it will be preserved.
This mode can also be effective at maintaining compartment
temperatures while entertaining when higher than
average door and drawer openings are anticipated.
This function (recommended in case of prolonged absences since it allows
considerable energy savings) brings the refrigerator compartment
temperature to +14°C (57.2°F). It is possible to program the duration, or it
can be manually deactivated upon returning after a period of absence.
This function remains active even if during the period of absence there is
a prolonged interruption of electrical power.
It is possible to program a period from 1 to 90 days.
MAX COOL / FRESH ZONE
This function must be activated at least 24 hours before inserting room temperature
items into the freezer, or several hours before placing into the freezer previously
frozen items which have been subject to a slight temperature rise. This function
is automatically deactivated when the programmed time period expires. It is
possible to program timed activation of the function.
If interrupted by a prolonged interruption of the electrical power, it is necessary
to reactivate the function.
How to activate
EN
How to deactivate
How to program timed activation
It is possible to program the function with a delay of 1 to 12 hours.
HOLIDAY / FRESH ZONE
This function (recommended in case of prolonged absences since it allows considerable
energy savings) brings the Fresh Zone compartment temperature to - 18°C (46.4°F).
It is possible to program the duration, or it can be manually deactivated upon re-entry
after a period of absence.
This function remains active even if during the period of absence there is a prolongedinterruption of electrical power.
How to activate
How to deactivate upon re-entry
How to program the duration
It is possible to program a period from 1 to 90 days.
This function can be activated when it is necessary to cool off beverages
quickly, by placing them inside the freezer compartment.
It is possible to select a duration of 1 to 45 minutes. A sound signal will
indicate when the optimal temperature has been reached. After removing
the beverages, deactivate the sound signal by pressing
the Alarm button .
How to activate
How to deactivate
How to program the duration
ICE MAKER
The IceMaker function permits selecting the size of the ice cubes, by
choosing between Large (base setting) or Medium, and activation of
the Fast Ice function, which increases the quantity of produced ice.
The Fast Ice function deactivates automatically after 24 hours.
(continued)
How to activate the cube size function
How to deactivate
How to activate the SuperIce function
How to deactivate
SABBATH MODE (optional)
Sabbath Mode (Optional)
How to activate
The function makes it possible to comply to certain religious observances
requiring that the operation of the appliance is not affected by the opening or closing of the doors (the thermostatic control, the inner lighting and
the ice maker are deactivated).
The View Status function permits visualizing the time left before the
lter needs to be replaced.
How to check the status of the
lter
RESET FILTER
The Reset Filter function sets to zero the time left before the
lter needs to be replaced. It is necessary to set the meter to zero
each time the cartridge is replaced.
How to set the ltered water
meter to zero
BYPASS FILTER
This function is to be activated when it is not necessary to lter
the water because excellent quality water is already available from
the home water system.
(continued)
EN
How to activate lter Bypass
MANUAL CLEAN WATER FILTER
If ice production has been disabled or unused for a long period it isrecommended to perform a Manual Clean function to ush out
water which has salt in the system during this period. Repeat the
operation until the water is clean.
How to manually clean the lter
Before proceeding it is important to turn off the ice maker by
pressing the Ice button.
Correctly position the ice tray or another suitable
container under the IceMaker to collect water,
then close the drawer. At the end of the operation,