Hestan KFCL24BG User Manual

INDOOR PRESERVATION

Refrigerators and Freezers

KRP / KRB / KRC / KFC

Use and Care Manual

HOMEOWNER: RETAIN THIS MANUAL FOR FUTURE REFERENCE.

IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED

EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY

DAMAGE, PERSONAL INJURY, OR DEATH.

Do not store or use gasoline or other ﬂammable vapors and liquids in the vicinity of this or any other appliance.

Installation and service must be performed by a qualiﬁed installer or service agency.

DO NOT REPAIR, REPLACE OR REMOVE ANY PART OF THE APPLIANCE UNLESS SPECIFICALLY RECOMMENDED IN THE MANUAL. IMPROPER INSTALLATION, SERVICE OR MAINTENANCE CAN CAUSE INJURY OR PROPERTY DAMAGE. REFER TO THIS MANUAL FOR GUIDANCE. ALL OTHER SERVICING SHOULD BE DONE BY A QUALIFIED TECHNICIAN.

READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE INSTALLING OR USING YOUR APPLIANCE TO REDUC THE RISK OF FIRE, BURN HAZARD, OR OTHER INJURY. KEEP THIS MANUAL FOR FUTURE REFERENCE.

SAFETY DEFINITIONS

THIS INDICATES THAT DEATH OR SERIOUS INJURY MAY OCCUR AS A RESULT OF NOT OBSERVING THIS WARNING

THIS INDICATES THAT MINOR OR MODERATE INJURY MAY OCCUR AS A RESULT OF NOT OBSERVING THIS WARNING.

THIS INDICATES THAT DAMAGE TO THE APPLIANCE OR PROPERTY MAY OCCUR AS A RESULT OF NOT OBSERVING THIS WARNING.

INSTALLER: LEAVE THIS MANUAL WITH THE OWNER OF THE APPLIANCE.

Message from Hestan:

Hestan’s award-winning culinary innovations and purpose-built features reinvented the restaurant kitchen and redefined culinary experience in some of America’s most acclaimed restaurants. Hestan now takes this performance from the back of the house and puts it front and center in yours. Thoughtfully designed and meticulously built, Hestan will serve you beautifully for years to come.

Hestan is the only residential brand born from the dreams and demands of professional chefs. From ranges to refrigeration, every detail is designed to deliver the performance and reliability expected in a restaurant – now available for you.

We appreciate you choosing Hestan, and we promise to deliver the very best to you.

Welcome to Hestan

TABLE OF CONTENTS

3 SAFETY PRECAUTIONS - BEFORE YOU BEGIN 6 MODEL NUMBERS 7 RATING LABEL 7 REGULATORY / CODE REQUIREMENTS 8 GETTING TO KNOW YOUR APPLIANCE 12 CONTROLS AND OPERATION 21 INTERNAL LAYOUT 25 FOOD PRESERVATION 28 CARE AND CLEANING 29 TROUBLESHOOTING 32 MAP OF FUNCTIONS AND SETTINGS 34 PARTS / SERVICE 35 LIMITED WARRANTY

SAFETY PRECAUTIONS - BEFORE YOU BEGIN

When properly cared for, your Hestan appliance will provide safe, reliable service for many years. When using this appliance, basic safety practices must be followed as outlined below.

IMPORTANT: Save these instructions for the local Utility Inspector’s use.

INSTALLER: Please leave these instructions with the owner.

OWNER: Please retain these instructions for future reference.

This appliance is NOT designed for installation in manufactured (mobile) homes or recreational park trailers. Do NOT install this appliance outdoors.

ELECTRICAL SHOCK HAZARD

Disconnect power before installing or servicing appliance. Failure to do so can result in death or electrical shock.

ELECTRICAL GROUNDING

• This appliance must be grounded. Grounding reduces the risk of electric shock in the event of a short circuit. Read the ELECTRICAL CONNECTIONS section of the Installation Manual for complete instructions.

• DO NOT ground to a gas pipe.

• DO NOT use an extension cord with this appliance.

• DO NOT have a fuse in the NEUTRAL or GROUNDING circuit. A fuse in the NEUTRAL or GROUNDING circuit could result in an electrical shock.

SAFETY PRECAUTIONS - BEFORE YOU BEGIN

GENERAL SAFETY PRECAUTIONS

(CONT.)

If this appliance is replacing an existing appliance which must be removed or disposed of, make sure that it does not become a dangerous trap for children by cutting its power supply cable and rendering it impossible to close the door. Use the same caution at the end of the lifespan of the new appliance.

This appliance is designed to refrigerate beverages and foods and is intended for domestic use.

The appliance must be installed by following the instructions in the Installation Guide. Particular care should be taken not to obstruct the vent openings of the appliance and of the built-in units.

The appliance features a concentrated lighting system with LED lamps. Do not stare into these lamps when they are on to avoid possible eyesight damage. This warning is also contained on the label attached to the inside of the refrigerator door.

When the freezer is functioning do not touch the inner stainless steel surfaces with wet or damp hands, since skin may stick to the very cold surfaces.

Do not use any type of electrical equipment inside of the food conservation compartments.

When positioning the shelves, do not place fingers in the shelf slide guides.

Do not position containers of flammable liquids near the appliance.

Completely switch off the appliance and unplug the power supply cable during cleaning operations.

The packaging parts can be dangerous for children: do not allow children to play with the plastic bags, plastic film or Styrofoam.

Any repairs must be performed by a qualified Hestan Service technician.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

Risk Group 2

PRUDENZA:

NON FISSARE LA LAMPADA IN FUNZIONE.

PUÒ ESSERE DANNOSO PER GLI OCCHI.

CAUTION:

DO NOT STARE AT OPERATING LAMP.

MAY BE HARMFUL TO THE EYES.

Product tested in accordante with EN62471

B09001301

CARING FOR THE ENVIRONMENT

Pay special attention to correct disposal procedure for all the packaging materials.

The appliance must not be disposed of with urban waste. Contact local waste disposal centers on how to dispose of recyclable waste.

Prior to disposal, cut the power supply cord and make it impossible to close the door, as stated in “GENERAL SAFETY PRECAUTIONS” above. During disposal, avoid damage to the electronics.

The appliance does not contain hazardous substances for the atmospheric ozone layer, neither in the electronics nor in the insulation.

SAFETY PRECAUTIONS - BEFORE YOU BEGIN

CLEANING AND MAINTENANCE OF THE ICE DISPENSER

(CONT.)

Failure to properly sanitize the ice maker system can compromise the hygienic safety of the water dispensed. Always follow sanitization instructions.

When using the appliance for the first time and every time the filter is changed, it is recommended to let the water flow in the circuit using the “Manual Cleaning” function and discard the ice produced in the first 24 hours. See “ACTIVATING THE ICE MAKER” on page

13.

Clean the ice bucket or drawer regularly using only drinking water.

The filter must be changed when indicated on the control panel or when the ice/water dispenser has not been used for more than 30 days.

With each filter replacement, sanitize the ice and/or water distribution system using a food grade disinfectant (with sodium hypochlorite), which does not alter the characteristics of the materials. Run the “Manual Cleaning” function so that at least 1/2 gallon of water has come through into the catch pan before use.

Only original spare parts supplied by the manufacturer should be used when replacing components in the ice and water dispenser.

Any work on the appliance must be carried out by a qualified technician.

USING THE CONTROL MENUS

Depending on the appliance model, there may be one or two control panels, with various controls available. Up/Down arrows various cooling/refrigeration/freezer zones. When two panels are present, only the main panel has the

and buttons.

are provided to directly adjust temperatures in the

Many features and settings are only accessible through the control menus. Here are the basics:

1) Touch the key to activate the interactive menu system. If the display shows “KEYPAD LOCKED”, touch the seconds. (See “UNLOCKING THE KEYPAD” on page 14)

• Either set of the up/down buttons will move the menu selections. The active selection

is always shown in the display.

2) Use the Up/Down buttons to show a selection, then touch the button to activate it.

• You may need to use the up/down buttons again to get to a final selection. When

turning selections ON or OFF, you will have to actually follow down to that ON or OFF and touch

3) To go back out of the menu, touch the button as needed.

See also: “SPECIAL SETTINGS AND FUNCTIONS” on page 14.

to confirm it.

and Down key for several

MODEL NUMBERS

REFRIGERATION MODELS

Model No. Description

KRPR36 Bottom Mount Refrigerator, Top Compressor, Pro, Right Hinged, 36" KRPL36 Bottom Mount Refrigerator, Top Compressor, Pro, Left Hinged, 36" KRPR36-XX Bottom Mount Refrigerator, Top Compressor, Pro, Color, Right Hinged, 36" KRPL36-XX Bottom Mount Refrigerator, Top Compressor, Pro, Color, Left Hinged, 36"

KRBR36 Bottom Mount Refrigerator, Bottom Compressor, Right Hinged, 36" KRBL36 Bottom Mount Refrigerator, Bottom Compressor, Left Hinged, 36" KRBR36-OV Bottom Mount Refrigerator, Bottom Compressor, Overlay, Right Hinged, 36" KRBL36-OV Bottom Mount Refrigerator, Bottom Compressor, Overlay, Left Hinged, 36" KRBR36-XX Bottom Mount Refrigerator, Bottom Compressor, Color, Right Hinged, 36" KRBL36-XX Bottom Mount Refrigerator, Bottom Compressor, Color, Left Hinged, 36"

KRCR24 Refrigerator Column, Right Hinged, 24" KRCL24 Refrigerator Column, Left Hinged, 24" KRCR24-OV Refrigerator Column, Overlay, Right Hinged, 24" KRCL24-OV Refrigerator Column, Overlay, Left Hinged, 24" KRCR24-XX Refrigerator Column, Color, Right Hinged, 24" KRCL24-XX Refrigerator Column, Color, Left Hinged, 24"

KRCR30 Refrigerator Column, Right Hinged, 30" KRCL30 Refrigerator Column, Left Hinged, 30" KRCR30-OV Refrigerator Column, Overlay, Right Hinged, 30" KRCL30-OV Refrigerator Column, Overlay, Left Hinged, 30" KRCR30-XX Refrigerator Column, Color, Right Hinged, 30" KRCL30-XX Refrigerator Column, Color, Left Hinged, 30"

FREEZER MODELS

Model No. Description

KFCR24 Freezer Column, Right Hinged, 24" KFCL24 Freezer Column, Left Hinged, 24" KFCR24-OV Freezer Column, Overlay, Right Hinged, 24" KFCL24-OV Freezer Column, Overlay, Left Hinged, 24" KFCR24-XX Freezer Column, Color, Right Hinged, 24" KFCL24-XX Freezer Column, Color, Left Hinged, 24"

KFCR30 Freezer Column, Right Hinged, 30" KFCL30 Freezer Column, Left Hinged, 30" KFCR30-OV Freezer Column, Overlay, Right Hinged, 30" KFCL30-OV Freezer Column, Overlay, Left Hinged, 30" KFCR30-XX Freezer Column, Color, Right Hinged, 30" KFCL30-XX Freezer Column, Color, Left Hinged, 30"

RATING LABEL

ozFridge Gas Fill Charge

Quantité de Gaz Réfrigerateur Freezer Gas Fill Charge

Quantité de Gaz Congélateur T otal Absorbed Current

Courant Absorbée Totale Voltage

Tension Frequency

Frequence Refrigerant Gas Type

Type de Gaz Rèfrigerant

MODEL

Made in Italy

CODE

SER.NO./N° SERIE

ETL LISTED CONFORMS TO ANSI/UL STD 250 CERTIFIED TO CAN/CSA STD C22.2 NO.63

HESTAN COMMERCIAL CORP. ANAHEIM, CA - USA

KRP36

115

R134a

FI24RC-RO F20160725000001

The rating label contains important information about your Hestan appliance such as the model and serial number and electrical rating.

The rating label is located on the inside wall of the refrigerator.

TYPICAL RATING LABEL

REGULATORY / CODE REQUIREMENTS

Installation of this refrigeration appliance must be made in accordance with local codes. In the absence of local codes, this unit should be installed in accordance with the National Electrical Code and local codes.

This appliance must be electrically grounded in accordance with local codes or in the absence of local codes with the National Electrical Code ANSI/NFPA 70, or Canadian Electrical code CSA C22.1.

GETTING TO KNOW YOUR APPLIANCE

KRB Models

Stainless steel grille,

FEATURES OF THE KRP / KRB REFRIGERATOR

Fridge

Low Temp

Fresh Zone

2 3

8 9

aluminum trim

Control panel with display

2 3

Water Filter

Patented shelf positioning

system

“Low Temp” crisper compartments

KRP Models

Automatic ice maker

6 7

Dual refrigeration system

Temperature display

Sound signals

Holiday function

Adjustable door shelves

LED lighting - multiple locations in each compartment

Automatic drawer closing

system

Fridge

Low Temp

Fresh Zone

FreshZone/freezer

8 9

compartment. When the appliance is first turned on the FreshZone/freezer compartment is set to the

2 3 4

freezer mode. It can be transformed into a refrigerator or ExtendFresh compartment.

13 14

GETTING TO KNOW YOUR APPLIANCE

CONTROL PANEL (KRP / KRB MODELS)

(CONT.)

The electronic control system on your Hestan refrigerator maintains constant temperature in both compartments and displays the measured temperature on the control panel. It also allows the user to personalize settings of the various functions and provides alerts should a malfunction occur.

1 2 3 4 5 6 7 8 9

On/Off

Fridge

Up/Down Fridge

Switches the appliance (all compartments) between ON and Stand by (Touch for three seconds).

Allows you to switch off the refrigerator compartment (Touch for three seconds).

Allows access to the control panel menu to change the appliance’s various settings.

Up/Down - refrigerator: Adjust refrigerator temperature setting or to navigate through the control panel menu.

Display

Up/Down Freezer

(FreshZone)

Ice maker

Alarm

Shows the temperature of the refrigerator and freezer (FreshZone) compartments, the date and time, control panel menu and visual messages.

Up/Down - freezer (FreshZone): Adjust freezer (FreshZone) temperature setting or to navigate through the control panel menu.

Tap to confirm selections made in the control panel menu.

Tap to turn the ice maker on or off.

Flashes to signal user alerts such as door being left open in combination with a warning tone. Tap this key to deactivate the warning tone.

KFC Models

Patented shelf positioning

GETTING TO KNOW YOUR APPLIANCE

(CONT.)

FEATURES OF THE REFRIGERATOR OR FREEZER COLUMN (KRC/KFC)

7 8

Stainless steel grille,

aluminum trim

Control panel with display

Fridge

Low Temp

system

“Low Temp” crisper compartments

Automatic ice maker

Refrigeration system

Temperature display

KRC Models

Sound signals

Adjustable door shelves

Automatic door closing system

LED lighting, multiple locations

8 7

10 6

Freezer

GETTING TO KNOW YOUR APPLIANCE

CONTROL PANEL (KRC / KFC MODELS)

1 2 3 4 5 6 7

(CONT.)

On/Off

Up/Down

Display

Up/Down

Alarm

Switches the appliance between ON and Stand by (Press for three seconds).

Allows access to the control panel menu to change the appliance’s various settings.

Up/Down - Adjust the temperature setting or to navigate through the control panel menu. (KRC/KFC has only one temperature zone.)

Display: Shows the temperature of the compartment, the date and time, control panel menu and various other messages.*

Up/Down - Adjust the temperature setting or to navigate through the control panel menu. (KRC/KFC has only one temperature zone.)

Press to confirm selections made in the control panel menu.

Flashes to signal user alerts such as door being left open in combination with a warning tone. Tap this key to deactivate the warning tone.

CONTROLS AND OPERATION

TURNING THE APPLIANCE ON AND OFF

FIRST STARTUP

When the appliance is connected to the electrical power supply but has not yet been switched on, the display shows the message

This is a safety message to warn that the appliance is connected to the main power and the control panel is off.

To switch the appliance on, press the On/Off button for three seconds.

SWITCHING OFF THE REFRIGERATOR AND FRESH ZONE COMPARTMENTS

When the appliance is first turned on the lower compartment is set to the “freezer” mode. Once the appliance has started up, the freezer remains always on and can be switched off only by switching off the complete appliance.

To power off, press On/Off

for three seconds.

RESTARTING

Use the same buttons to restart.

The freezer compartment always stays on and cannot be switched off except by completely switching off the appliance by pressing the On/ Off

button for three seconds.

SWITCHING OFF FOR LONG PERIODS

During long absence periods it is recommended to switch off the refrigerator by pressing the On/Off button for three seconds and disconnecting the electrical plug or the appropriate circuit breaker.

Completely empty the refrigerator, clean and dry it and leave the door and drawer partially open to prevent unpleasant odors.

If at the first startup the Standby message does not appear, but another message appears, it means that the appliance has already started the cooling process.

If any alarms are sounding, touch the Alarm button to silence them, and let the appliance run until the set temperature is reached.

During the first startup, it will not be possible to use the Menu to modify the factory settings until the preset temperature has been reached.

Each time the appliance is switched on it goes through a self diagnosis procedure lasting three minutes before completely starting up.

If only the refrigerator or wine compartment is turned off, the specific fan will continue to operate to prevent the formation of unpleasant odors and mold.

Before turning off the appliance for a long period of time, remove all of the items inside and leave the door and drawer open to prevent the formation of unpleasant odors and mold.

CONTROLS AND OPERATION

Turn icemaker ON

(CONT.)

ADJUSTING THE TEMPERATURE SETTINGS

Each model has been carefully tested before leaving the factory and is adjusted to ensure high performance and low consumption. Usually, it is not necessary to modify the settings. Nevertheless, according to special needs, it is possible to modify the set temperatures within a certain range. The “recommended” settings below are also the factory presets for each of the zones and modes.

To adjust the temperature use the Up/Down buttons

for that zone. Upon touching these buttons the newly set temperature will appear in the display. To modify this temperature, use the buttons until reaching the desired temperature. After several seconds of showing the new set temperature, the display will resume showing actual temperature.

Refrigeration Compartment and FreshZone/Freezer

From 34°F to 46°F [+1°C to +7°C], the recommended temperature setting is 39°F [+4°C].

drawer set as refrigeration

FreshZone/Freezer drawer set as ExtendFresh

Freezer Compartment and FreshZone/Freezer drawer

28°F to 36°F [−2°C to +2°C]

Recommended temperature setting is 32°F [

0°C]

From 9°F to −11°F [−13°C to −23°C], the recommended temperature setting is

0°F [−18°C].

set as freezer

The actual temperature can vary from the set temperature following frequent openings of the doors or insertion of room temperature foods or large quantities of foods.

6 to 12 hours may be necessary to reach the selected temperature.

ACTIVATING THE ICE MAKER

Do not perform a Manual Clean or activate the Ice Maker until the water line is properly connected and water is turned on to the appliance.

KRB/KRP: The Ice Maker button maker ON/OFF. The button is illuminated when the ice maker is functioning.

Other Models: The ice maker is activated or deactivated using the menus:

Turn icemaker OFF

An initial flush of the water circuit should be performed before activating the Ice Maker for the first time. This is done using the Manual Clean function as follows.

Touch the

button to activate the interactive menu.

The active menu item is shown at the bottom of the display. If “Functions” isn’t showing, use the Up/Down

buttons to show the various choices until “Functions” is shown.

• In the instruction below, when the symbol is shown, that means “use the Up/Down

button to display the following item”.

located on the main control panel turns the automatic ice

OKOK

See “WATER FILTER MANAGEMENT” on page 18 for more information.

OKOK

CONTROLS AND OPERATION

(CONT.)

DISPLAY INFORMATION AND MALFUNCTION MESSAGES

An integrated control system provides information through light signals or text messages visualized on the display.

The information signal is always visualized with a steady text message, while a malfunction signal is visualized with blinking text. The sound signal that accompanies some malfunction signals can be deactivated by pressing the Alarm button on the main control panel.

The list of malfunction signals is located at the back of this manual.

SPECIAL SETTINGS AND FUNCTIONS

The appliance can be configured to suit various needs through its settings, such as its operating modes, display language, and information display. Special functions are provided to meet various short term needs, such as parties or vacations.

The Settings and Functions are accessed on the main display by pressing the

The Up/Down buttons display options which can be selected by pressing the button. The Up/Down buttons activating or deactivating by pressing the button.

Once a setting or function is confirmed, the display will automatically step back to the previous menu to allow selection of other functions. In many cases it is possible to return to the previous selection through the

The language of the messages appearing on the display can be changed by operating as follows: Enter the Menu by pressing the confirm via . Then select the Language function and the desired language.

scroll through the selected function or setting sub-menus if applicable,

button.

button, select Settings via the Up/Down buttons and

button.

See also: “USING THE CONTROL MENUS” on page 5.

UNLOCKING THE KEYPAD

The keypad automatically locks after a while if not being used. When it is locked, any touch of the keypad will display “KEYPAD LOCKED’.

To unlock, touch the for several seconds, until the message “KEYPAD UNLOCKED” shows on the display.

key and Down key together

HHooww ttoo aaccttiivvaattee

CONTROLS AND OPERATION

FUNCTIONS

MAX COOL

(CONT.)

The Max Cool Mode prepares the cooling, Fridge and FreshZone compartments for the introduction of fresh food or other items which may have warmed during transport. The more quickly an item can be cooled or frozen the better it will be preserved.

This mode can also be effective at maintaining compartment temperatures while entertaining when higher than average door and drawer openings are anticipated.

To use special functions, select the

button and use the Up/Down buttons .

The Max Cool function lowers the refrigerator temperature to 35.6°F [+2°C] for 12 hours, permitting more rapid cooling of food that has just been placed in. Once the 12 hours have expired, the function deactivates automatically, returning to the previously set temperature. You can set a 1-12 hour delay before the function starts. If a power outage occurs while MaxCool is active, the appliance resumes normal operation when power returns.

Max Cool

HHooww ttoo ddeeaaccttiivvaattee

Setting a delayed start

Max Cool

MAX COOL FRESHZONE

This function should be activated at least 24 hours before inserting room temperature items into the freezer, or several hours before placing into the freezer previously frozen items which have been subject to a slight temperature rise. When activated, the appliance will operate in MaxCool for 56 hours and then return to usual operation. You can set the function to start after a delay of 1-12 hours. If a power outage occurs while MaxCool is active, the appliance resumes normal operation when power returns.

FreshZone

Max Cool

FreshZone

HHooww ttoo ddeeaaccttiivvaattee

Setting a delayed

start

Max Cool

FreshZone

Max Cool

FreshZone

Max Cool

HOLIDAY

This function (recommended in case of prolonged absences since it allows considerable energy savings) brings the refrigerator compartment temperature to 57.2°F [+14°C]. It is possible to program the duration, or it can be manually deactivated upon returning after a period of absence. This function remains active even if during the period of absence there is a prolonged interruption of electrical power. It is possible to program a period from 1 to 90 days.

HHooww ttoo aaccttiivvaattee

How to activate

CONTROLS AND OPERATION

Holiday

HHooww ttoo ddeeaaccttiivvaattee

uuppoonn rreettuurrnn

Holiday

HHooww ttoo pprrooggrraamm

tthhee dduurraattiioonn

Holiday

(CONT.)

Holiday

HOLIDAY FRESHZONE

It is possible to program the function with a delay of 1 to 12 hours, and a duration of 1 to 90 days. This function (recommended in case of prolonged absences since it allows considerable energy savings) brings the FreshZone/freezer compartment temperature to 46.4°F [8°C]. It is possible to program the duration, or it can be manually deactivated upon reentry after a period of absence. This function remains active even if during the period of absence there is a prolonged interruption of electrical power.

HHooww ttoo aaccttiivvaattee

HHooww ttoo ddeeaaccttiivvaattee

uuppoonn rreettuurrnn

HHooww ttoo pprrooggrraamm

tthhee dduurraattiioonn

Holiday

Holiday Holiday

Holiday

FreshZone

HolidayHoliday

FreshZone

BEVERAGE COOLER

This function can be activated when it is necessary to cool off beverages quickly, by placing them inside the freezer compartment. It is possible to select a duration of 1 to 45 minutes. A sound signal will indicate when the optimal temperature has been reached. After removing the beverages, deactivate the sound signal by pressing the Alarm button.

How to

deactivate

How to program

the duration

Beverage

BeverageBeverage

Beverage

CONTROLS AND OPERATION

Turn icemaker ON

OKOK

OK OK

Fast Ice Fast Ice

Fast Ice

How to set cube

size to large

HHooww ttoo aaccttiivvaattee tthhee

FFaasstt IIccee ffuunnccttiioonn

HHooww ttoo ddeeaaccttiivvaattee

FFaasstt IIccee

How to set cube

size to medium

ICE MAKER ON/OFF

(CONT.)

Certain models do not have the (Ice Maker) button on the control panel, and the ice maker may be turned ON/OFF using menu functions.

Turn icemaker OFF

OKOK

ICE MAKER SETTINGS

The Ice Maker function permits selecting the size of the ice cubes, by choosing between Large (base setting) or Medium, and activation of the Fast Ice function, which increases the quantity of produced ice. The Fast Ice function deactivates automatically after 24 hours.

SABBATH MODE

The function makes it possible to comply to certain religious observances requiring that the operation of the appliance is not affected by the opening or closing of the doors (the thermostatic control, the inner lighting and the ice maker are deactivated).

When you activate Sabbath Mode, the interior lights will deactivate, and the display will show “Sabbath Mode ON”. When you turn Sabbath Mode off, the appliance will return to normal operation, except that menus will not be available for several minutes.

HHooww ttoo aaccttiivvaattee

HHooww ttoo ddeeaaccttiivvaattee

CONTROLS AND OPERATION

View Status

WATER FILTER MANAGEMENT

(CONT.)

The following functions display filter life, permit bypassing the filter, and provide manual flush/clean of the filter and ice maker.

Filter Status and counter reset

Functions to view remaining life and to reset counter after changing filter cartridge.

The View Status function displays the remaining life of the filter.

How to check the status of the filter

Resetting filter

How to set the filtered

water meter to zero

The Reset Filter function sets the filter usage counter to zero. Do this when replacing the filter cartridge.

Bypassing the filter

The included filter can be bypassed when excellent quality water is available from he home water system.

How to activate

filter bypass

How to de-activate

filter bypass

Manual clean (flush) water filter

If ice production has been disabled or unused for a long period it is recommended to perform a Manual Clean function to flush out water which has sat in the system during this period. Repeat the operation until the water is clean. Before proceeding it is important to turn off the ice maker by pressing the

How to manually

clean the filter

Correctly position the ice tray or another suitable container under the ice maker to collect water, then close the drawer. At the end of the operation, wash the tray.

button or using the menu. (See previous page.)

CONTROLS AND OPERATION

SETTINGS

(CONT.)

The following settings control operation modes, information display, and so on.

To view or change settings, select the button, use the Up/Down buttons to select SETTINGS, and press .

FREEZER /FRESHZONE DRAWER

Freezer/ExtendFresh

Options

How to set it for

Fridge mode

How to set it for

ExtendFresh mode

How to revert to

Freezer mode

The freezer compartment can, if required, be converted

.edom gnitarepo hserFdnetxE ro noitaregirfer ot

OK OK

FreshZone

OKOK

SETTING DATE, SHOWING/NOT SHOWING DATE

The display will show the date in the format dd:mm:yy (day:month:year), the day will blink. Use the Up/Down buttons

next setting. Once the year is confirmed, the date will be set.

To set the date

Showing Date

to modify the setting, confirm the setting with to move to the

Use this function to have the date show or not show on the display.

To display date

To not display date

SETTING TIME

The display shows the hours and minutes in the format hh:mm and with hh: blinking. Use the Up/Down buttons

to modify the setting and then confirm by pressing to go on to the

next setting. Once the minutes are confirmed, the time will be set.

How to set the time

SETTING 12/24 HOUR DISPLAY

How to set the

display for 24 h

How to set the

display for 12 h

CONTROLS AND OPERATION

SHOWING/NOT SHOWING TIME

(CONT.)

HHooww ttoo aaccttiivvaattee tthhee

ttiimmee ddiissppllaayy

HHooww ttoo ddeeaaccttiivvaattee

LANGUAGE DISPLAY

Select the language used for all prompts and messages.

IIttaalliiaann

EEnngglliisshh

FFrreenncchh

GGeerrmmaann

SSppaanniisshh

TEMPERATURE UNITS

Select Centigrade or Fahrenheit units for temperature setting values and display.

Set temperature

in Centigrade

Set temperature

in Fahrenheit

KEYPAD LOCK

Enable/disable the keypad self-locking feature.

HHooww ttoo aaccttiivvaattee

HHooww ttoo ddeeaaccttiivvaattee

Keypad lock

ON: The keypad locks after not being used for several minutes.

OFF: The keypad does not self-lock.

RESTORING DEFAULTS

This restores the factory-configured basic settings by canceling the changes made thereafter.

How to reset

default settings

ATTENTION: If the default settings are restored, the default mode of the freezer/ExtendFresh compartment is freezer mode.

If it was previously being used in refrigerator or Fresco mode be sure to set it back to your desired setting.

INTERNAL LAYOUT

FRESHZONE, LOW TEMP DRAWERS

The FreshZone drawer is held to the slide guides by a thumbscrew on each side. Release the thumbscrews to remove the drawer.

To remove the inner drawer unscrew and remove its thumbscrews.

When replacing the drawer, make certain the back of the drawer engages under the clips on the slide guides. Once the drawer is properly in position, reinstall the thumb screws as they are necessary to keep the drawer in place.

ICE TRAY

The ice tray is located in the upper drawer of the freezer compartment.

After removal, make sure to reposition it correctly - small protrusions from the bottom of the ice bin should align with holes in the upper freezer drawer.

Do not place hands or fingers near the ice maker when it is functioning.

ADJUSTABLE SHELVES

It is recommended that the shelves be emptied prior to adjusting the position. The shelves are able to slide up and down and can be easily re-positioned by the user as follows:

1) Slightly loosen the small locking knob (located under the

shelf on the left side at the back) by turning it counterclockwise.

2) Support the back of the shelf and tilt it upward at the front.

This will allow you to raise or lower the shelf to the desired position.

3) Once in position, lower the front of the shelf and tighten the locking knob.

• The locking knob keeps the shelf locked safely in position. If the locking knob is loose, the

shelf could slide down if it were raised or tilted upward at the front.

To remove a shelf:

1) Remove the top cap of the left and right side ladder

2) Tilting the front of the shelf upward, slide the shelf to the top to remove.

• It is not necessary to remove the shelves for cleaning.

+ 53 hidden pages

Hestan KFCL24BG User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual